Martin Kojtal
a
Dependencies: FATFileSystem mbed-rtos
Fork of
USBHost
by 
mbed official
Diff: targets/TARGET_RENESAS/TARGET_RZ_A1H/ohci_wrapp_pipe.c
- Revision:
- 39:d96aa62afc5b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_RENESAS/TARGET_RZ_A1H/ohci_wrapp_pipe.c Thu Jul 27 12:24:30 2017 +0100
@@ -0,0 +1,189 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "devdrv_usb_host_api.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/********************************************************************************************************/
+/* Endpoint Configuration Data Format */
+/********************************************************************************************************/
+/* LINE1: Pipe Window Select Register */
+/* CPU Access PIPE : USB_HOST_PIPE1 to USB_HOST_PIPE9 [ ### SET ### ] */
+/* LINE2: Pipe Configuration Register */
+/* Transfer Type : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Buffer Ready interrupt : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Double Buffer Mode : USB_HOST_DBLBON / USB_HOST_DBLBOFF [ ### SET ### ] */
+/* Continuous Transmit: : USB_HOST_CNTMDON / USB_HOST_CNTMDOFF [ ### SET ### ] */
+/* Short NAK : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Transfer Direction : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Endpoint Number : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* LINE3: Pipe Buffer Configuration Register */
+/* Buffer Size : (uint16_t)((uint16_t)(((x) / 64) - 1) << 10) */
+/* [ ### SET ### ] */
+/* Buffer Top Number : (uint16_t)(x) [ ### SET ### ] */
+/* LINE4: Pipe Maxpacket Size Register */
+/* Max Packet Size : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* LINE5: Pipe Cycle Configuration Register (0x6C) */
+/* ISO Buffer Flush Mode : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* ISO Interval Value : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* LINE6: use FIFO port */
+/* : USB_HOST_CUSE [ ### SET ### ] */
+/* : USB_HOST_D0USE / USB_HOST_D1USE */
+/* : USB_HOST_D0DMA / USB_HOST_D0DMA */
+/********************************************************************************************************/
+
+/* Device Address 1 */
+USB_HOST_CFG_PIPETBL_t usb_host_blk_ep_tbl1[ ] =
+{
+ {
+ USB_HOST_PIPE3,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(8),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D0USE
+ },
+
+ {
+ /* Pipe end */
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF
+ }
+};
+
+USB_HOST_CFG_PIPETBL_t usb_host_int_ep_tbl1[ ] =
+{
+ {
+ USB_HOST_PIPE6,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(40),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE7,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(41),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE8,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(42),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE9,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBOFF | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(43),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ /* Pipe end */
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF
+ }
+};
+
+USB_HOST_CFG_PIPETBL_t usb_host_iso_ep_tbl1[ ] =
+{
+ {
+ USB_HOST_PIPE1,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(44),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE2,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDOFF | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(76),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ /* Pipe end */
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF
+ }
+};
+
+
+/* End of File */