Diff: targets/TARGET_NUVOTON/TARGET_M451/USBHALHost_M451.cpp

Revision:

39:d96aa62afc5b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NUVOTON/TARGET_M451/USBHALHost_M451.cpp	Thu Jul 27 12:24:30 2017 +0100
@@ -0,0 +1,347 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015-2016 Nuvoton
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined(TARGET_M451)
+
+#include "mbed.h"
+#include "USBHALHost.h"
+#include "dbg.h"
+#include "pinmap.h"
+
+#define HCCA_SIZE   sizeof(HCCA)
+#define ED_SIZE     sizeof(HCED)
+#define TD_SIZE     sizeof(HCTD)
+
+#define TOTAL_SIZE (HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE) + (MAX_TD*TD_SIZE))
+
+#ifndef USBH_HcRhDescriptorA_POTPGT_Pos
+#define USBH_HcRhDescriptorA_POTPGT_Pos  (24)
+#endif
+#ifndef USBH_HcRhDescriptorA_POTPGT_Msk
+#define USBH_HcRhDescriptorA_POTPGT_Msk  (0xfful << USBH_HcRhDescriptorA_POTPGT_Pos)
+#endif
+
+static volatile MBED_ALIGN(256) uint8_t usb_buf[TOTAL_SIZE];  // 256 bytes aligned!
+
+USBHALHost * USBHALHost::instHost;
+
+USBHALHost::USBHALHost()
+{
+    instHost = this;
+    memInit();
+    memset((void*)usb_hcca, 0, HCCA_SIZE);
+    for (int i = 0; i < MAX_ENDPOINT; i++) {
+        edBufAlloc[i] = false;
+    }
+    for (int i = 0; i < MAX_TD; i++) {
+        tdBufAlloc[i] = false;
+    }
+}
+
+void USBHALHost::init()
+{
+    // Unlock protected registers
+    SYS_UnlockReg();
+
+    // Enable USBH clock
+    CLK_EnableModuleClock(USBH_MODULE);
+    // Set USBH clock source/divider
+    CLK_SetModuleClock(USBH_MODULE, 0, CLK_CLKDIV0_USB(3));
+    
+    // Configure OTG function as Host-Only
+    SYS->USBPHY = SYS_USBPHY_LDO33EN_Msk | SYS_USBPHY_USBROLE_STD_USBH;
+    
+    /* Below settings is use power switch IC to enable/disable USB Host power.
+       Set PA.2 is VBUS_EN function pin and PA.3 VBUS_ST function pin */
+    pin_function(PA_3, SYS_GPA_MFPL_PA3MFP_USB_VBUS_ST);
+    pin_function(PA_2, SYS_GPA_MFPL_PA2MFP_USB_VBUS_EN);
+
+    // Enable OTG clock
+    CLK_EnableModuleClock(OTG_MODULE);
+
+    // Lock protected registers
+    SYS_LockReg();
+    
+    // Overcurrent flag is low active
+    USBH->HcMiscControl |= USBH_HcMiscControl_OCAL_Msk;
+    
+    // Disable HC interrupts
+    USBH->HcInterruptDisable = OR_INTR_ENABLE_MIE;
+
+    // Needed by some controllers
+    USBH->HcControl = 0;
+
+    // Software reset
+    USBH->HcCommandStatus = OR_CMD_STATUS_HCR;
+    while (USBH->HcCommandStatus & OR_CMD_STATUS_HCR);
+
+    // Put HC in reset state
+    USBH->HcControl = (USBH->HcControl & ~OR_CONTROL_HCFS) | OR_CONTROL_HC_RSET;
+    // HCD must wait 10ms for HC reset complete
+    wait_ms(100);
+    
+    USBH->HcControlHeadED = 0;                      // Initialize Control ED list head to 0
+    USBH->HcBulkHeadED = 0;                         // Initialize Bulk ED list head to 0
+    USBH->HcHCCA = (uint32_t) usb_hcca;
+
+    USBH->HcFmInterval = DEFAULT_FMINTERVAL;        // Frame interval = 12000 - 1
+                                                    // MPS = 10,104
+    USBH->HcPeriodicStart = FI * 90 / 100;          // 90% of frame interval
+    USBH->HcLSThreshold = 0x628;                    // Low speed threshold
+
+    // Put HC in operational state
+    USBH->HcControl  = (USBH->HcControl & (~OR_CONTROL_HCFS)) | OR_CONTROL_HC_OPER;
+
+    // FIXME
+    USBH->HcRhDescriptorA = USBH->HcRhDescriptorA & ~(USBH_HcRhDescriptorA_NOCP_Msk | USBH_HcRhDescriptorA_OCPM_Msk | USBH_HcRhDescriptorA_PSM_Msk);
+    // Issue SetGlobalPower command
+    USBH->HcRhStatus = USBH_HcRhStatus_LPSC_Msk;
+    // Power On To Power Good Time, in 2 ms units
+    wait_ms(((USBH->HcRhDescriptorA & USBH_HcRhDescriptorA_POTPGT_Msk) >> USBH_HcRhDescriptorA_POTPGT_Pos) * 2);
+    
+    // Clear Interrrupt Status
+    USBH->HcInterruptStatus |= USBH->HcInterruptStatus;
+    // Enable interrupts we care about
+    USBH->HcInterruptEnable  = OR_INTR_ENABLE_MIE | OR_INTR_ENABLE_WDH | OR_INTR_ENABLE_RHSC;
+    
+    NVIC_SetVector(USBH_IRQn, (uint32_t)(_usbisr));
+    NVIC_EnableIRQ(USBH_IRQn);
+    
+    // Check for any connected devices
+    if (USBH->HcRhPortStatus[0] & OR_RH_PORT_CCS) {
+        // Device connected
+        wait_ms(150);
+        deviceConnected(0, 1, USBH->HcRhPortStatus[0] & OR_RH_PORT_LSDA);
+    }
+}
+
+uint32_t USBHALHost::controlHeadED()
+{
+    return USBH->HcControlHeadED;
+}
+
+uint32_t USBHALHost::bulkHeadED()
+{
+    return USBH->HcBulkHeadED;
+}
+
+uint32_t USBHALHost::interruptHeadED()
+{
+    // FIXME: Only support one INT ED?
+    return usb_hcca->IntTable[0];
+}
+
+void USBHALHost::updateBulkHeadED(uint32_t addr)
+{
+    USBH->HcBulkHeadED = addr;
+}
+
+
+void USBHALHost::updateControlHeadED(uint32_t addr)
+{
+    USBH->HcControlHeadED = addr;
+}
+
+void USBHALHost::updateInterruptHeadED(uint32_t addr)
+{
+    // FIXME: Only support one INT ED?
+    usb_hcca->IntTable[0] = addr;
+}
+
+
+void USBHALHost::enableList(ENDPOINT_TYPE type)
+{
+    switch(type) {
+        case CONTROL_ENDPOINT:
+            USBH->HcCommandStatus = OR_CMD_STATUS_CLF;
+            USBH->HcControl |= OR_CONTROL_CLE;
+            break;
+        case ISOCHRONOUS_ENDPOINT:
+            // FIXME
+            break;
+        case BULK_ENDPOINT:
+            USBH->HcCommandStatus = OR_CMD_STATUS_BLF;
+            USBH->HcControl |= OR_CONTROL_BLE;
+            break;
+        case INTERRUPT_ENDPOINT:
+            USBH->HcControl |= OR_CONTROL_PLE;
+            break;
+    }
+}
+
+
+bool USBHALHost::disableList(ENDPOINT_TYPE type)
+{
+    switch(type) {
+        case CONTROL_ENDPOINT:
+            if(USBH->HcControl & OR_CONTROL_CLE) {
+                USBH->HcControl &= ~OR_CONTROL_CLE;
+                return true;
+            }
+            return false;
+        case ISOCHRONOUS_ENDPOINT:
+            // FIXME
+            return false;
+        case BULK_ENDPOINT:
+            if(USBH->HcControl & OR_CONTROL_BLE){
+                USBH->HcControl &= ~OR_CONTROL_BLE;
+                return true;
+            }
+            return false;
+        case INTERRUPT_ENDPOINT:
+            if(USBH->HcControl & OR_CONTROL_PLE) {
+                USBH->HcControl &= ~OR_CONTROL_PLE;
+                return true;
+            }
+            return false;
+    }
+    return false;
+}
+
+
+void USBHALHost::memInit()
+{
+    usb_hcca = (volatile HCCA *)usb_buf;
+    usb_edBuf = usb_buf + HCCA_SIZE;
+    usb_tdBuf = usb_buf + HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE);
+}
+
+volatile uint8_t * USBHALHost::getED()
+{
+    for (int i = 0; i < MAX_ENDPOINT; i++) {
+        if ( !edBufAlloc[i] ) {
+            edBufAlloc[i] = true;
+            return (volatile uint8_t *)(usb_edBuf + i*ED_SIZE);
+        }
+    }
+    perror("Could not allocate ED\r\n");
+    return NULL; //Could not alloc ED
+}
+
+volatile uint8_t * USBHALHost::getTD()
+{
+    int i;
+    for (i = 0; i < MAX_TD; i++) {
+        if ( !tdBufAlloc[i] ) {
+            tdBufAlloc[i] = true;
+            return (volatile uint8_t *)(usb_tdBuf + i*TD_SIZE);
+        }
+    }
+    perror("Could not allocate TD\r\n");
+    return NULL; //Could not alloc TD
+}
+
+
+void USBHALHost::freeED(volatile uint8_t * ed)
+{
+    int i;
+    i = (ed - usb_edBuf) / ED_SIZE;
+    edBufAlloc[i] = false;
+}
+
+void USBHALHost::freeTD(volatile uint8_t * td)
+{
+    int i;
+    i = (td - usb_tdBuf) / TD_SIZE;
+    tdBufAlloc[i] = false;
+}
+
+
+void USBHALHost::resetRootHub()
+{
+    // Reset port1
+    USBH->HcRhPortStatus[0] = OR_RH_PORT_PRS;
+    while (USBH->HcRhPortStatus[0] & OR_RH_PORT_PRS);
+    USBH->HcRhPortStatus[0] = OR_RH_PORT_PRSC;
+}
+
+
+void USBHALHost::_usbisr(void)
+{
+    if (instHost) {
+        instHost->UsbIrqhandler();
+    }
+}
+
+void USBHALHost::UsbIrqhandler()
+{
+    uint32_t ints = USBH->HcInterruptStatus;
+    
+    // Root hub status change interrupt
+    if (ints & OR_INTR_STATUS_RHSC) {
+        uint32_t ints_roothub = USBH->HcRhStatus;
+        uint32_t ints_port1 = USBH->HcRhPortStatus[0];
+        uint32_t ints_port2 = USBH->HcRhPortStatus[1];
+        
+        // Port1: ConnectStatusChange
+        if (ints_port1 & OR_RH_PORT_CSC) {
+            if (ints_roothub & OR_RH_STATUS_DRWE) {
+                // When DRWE is on, Connect Status Change means a remote wakeup event.
+            } else {
+                if (ints_port1 & OR_RH_PORT_CCS) {
+                    // Root device connected
+                    
+                    // wait 150ms to avoid bounce
+                    wait_ms(150);
+
+                    //Hub 0 (root hub), Port 1 (count starts at 1), Low or High speed
+                    deviceConnected(0, 1, ints_port1 & OR_RH_PORT_LSDA);
+                } else {
+                    // Root device disconnected
+                    
+                    if (!(ints & OR_INTR_STATUS_WDH)) {
+                        usb_hcca->DoneHead = 0;
+                    }
+
+                    // wait 200ms to avoid bounce
+                    wait_ms(200);
+
+                    deviceDisconnected(0, 1, NULL, usb_hcca->DoneHead & 0xFFFFFFFE);
+
+                    if (ints & OR_INTR_STATUS_WDH) {
+                        usb_hcca->DoneHead = 0;
+                        USBH->HcInterruptStatus = OR_INTR_STATUS_WDH;
+                    }
+                }
+            }
+            USBH->HcRhPortStatus[0] = OR_RH_PORT_CSC;
+        }
+        // Port1: Reset completed
+        if (ints_port1 & OR_RH_PORT_PRSC) {
+            USBH->HcRhPortStatus[0] = OR_RH_PORT_PRSC;
+        }
+        // Port1: PortEnableStatusChange
+        if (ints_port1 & OR_RH_PORT_PESC) {
+            USBH->HcRhPortStatus[0] = OR_RH_PORT_PESC;
+        }
+        
+        // Port2: PortOverCurrentIndicatorChange
+        if (ints_port2 & OR_RH_PORT_OCIC) {
+            USBH->HcRhPortStatus[1] = OR_RH_PORT_OCIC;
+        }
+        
+        USBH->HcInterruptStatus = OR_INTR_STATUS_RHSC;
+    }
+
+    // Writeback Done Head interrupt
+    if (ints & OR_INTR_STATUS_WDH) {
+        transferCompleted(usb_hcca->DoneHead & 0xFFFFFFFE);
+        USBH->HcInterruptStatus = OR_INTR_STATUS_WDH;
+    }
+    
+    
+}
+#endif