Martin Kojtal
a
Dependencies: FATFileSystem mbed-rtos
Fork of
USBHost
by 
mbed official
Diff: USBHost/USBHALHost_M451.cpp
- Revision:
- 39:d96aa62afc5b
- Parent:
- 38:d66f404b66d4
--- a/USBHost/USBHALHost_M451.cpp Thu Jul 20 12:21:36 2017 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,347 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015-2016 Nuvoton
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#if defined(TARGET_M451)
-
-#include "mbed.h"
-#include "USBHALHost.h"
-#include "dbg.h"
-#include "pinmap.h"
-
-#define HCCA_SIZE sizeof(HCCA)
-#define ED_SIZE sizeof(HCED)
-#define TD_SIZE sizeof(HCTD)
-
-#define TOTAL_SIZE (HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE) + (MAX_TD*TD_SIZE))
-
-#ifndef USBH_HcRhDescriptorA_POTPGT_Pos
-#define USBH_HcRhDescriptorA_POTPGT_Pos (24)
-#endif
-#ifndef USBH_HcRhDescriptorA_POTPGT_Msk
-#define USBH_HcRhDescriptorA_POTPGT_Msk (0xfful << USBH_HcRhDescriptorA_POTPGT_Pos)
-#endif
-
-static volatile MBED_ALIGN(256) uint8_t usb_buf[TOTAL_SIZE]; // 256 bytes aligned!
-
-USBHALHost * USBHALHost::instHost;
-
-USBHALHost::USBHALHost()
-{
- instHost = this;
- memInit();
- memset((void*)usb_hcca, 0, HCCA_SIZE);
- for (int i = 0; i < MAX_ENDPOINT; i++) {
- edBufAlloc[i] = false;
- }
- for (int i = 0; i < MAX_TD; i++) {
- tdBufAlloc[i] = false;
- }
-}
-
-void USBHALHost::init()
-{
- // Unlock protected registers
- SYS_UnlockReg();
-
- // Enable USBH clock
- CLK_EnableModuleClock(USBH_MODULE);
- // Set USBH clock source/divider
- CLK_SetModuleClock(USBH_MODULE, 0, CLK_CLKDIV0_USB(3));
-
- // Configure OTG function as Host-Only
- SYS->USBPHY = SYS_USBPHY_LDO33EN_Msk | SYS_USBPHY_USBROLE_STD_USBH;
-
- /* Below settings is use power switch IC to enable/disable USB Host power.
- Set PA.2 is VBUS_EN function pin and PA.3 VBUS_ST function pin */
- pin_function(PA_3, SYS_GPA_MFPL_PA3MFP_USB_VBUS_ST);
- pin_function(PA_2, SYS_GPA_MFPL_PA2MFP_USB_VBUS_EN);
-
- // Enable OTG clock
- CLK_EnableModuleClock(OTG_MODULE);
-
- // Lock protected registers
- SYS_LockReg();
-
- // Overcurrent flag is low active
- USBH->HcMiscControl |= USBH_HcMiscControl_OCAL_Msk;
-
- // Disable HC interrupts
- USBH->HcInterruptDisable = OR_INTR_ENABLE_MIE;
-
- // Needed by some controllers
- USBH->HcControl = 0;
-
- // Software reset
- USBH->HcCommandStatus = OR_CMD_STATUS_HCR;
- while (USBH->HcCommandStatus & OR_CMD_STATUS_HCR);
-
- // Put HC in reset state
- USBH->HcControl = (USBH->HcControl & ~OR_CONTROL_HCFS) | OR_CONTROL_HC_RSET;
- // HCD must wait 10ms for HC reset complete
- wait_ms(100);
-
- USBH->HcControlHeadED = 0; // Initialize Control ED list head to 0
- USBH->HcBulkHeadED = 0; // Initialize Bulk ED list head to 0
- USBH->HcHCCA = (uint32_t) usb_hcca;
-
- USBH->HcFmInterval = DEFAULT_FMINTERVAL; // Frame interval = 12000 - 1
- // MPS = 10,104
- USBH->HcPeriodicStart = FI * 90 / 100; // 90% of frame interval
- USBH->HcLSThreshold = 0x628; // Low speed threshold
-
- // Put HC in operational state
- USBH->HcControl = (USBH->HcControl & (~OR_CONTROL_HCFS)) | OR_CONTROL_HC_OPER;
-
- // FIXME
- USBH->HcRhDescriptorA = USBH->HcRhDescriptorA & ~(USBH_HcRhDescriptorA_NOCP_Msk | USBH_HcRhDescriptorA_OCPM_Msk | USBH_HcRhDescriptorA_PSM_Msk);
- // Issue SetGlobalPower command
- USBH->HcRhStatus = USBH_HcRhStatus_LPSC_Msk;
- // Power On To Power Good Time, in 2 ms units
- wait_ms(((USBH->HcRhDescriptorA & USBH_HcRhDescriptorA_POTPGT_Msk) >> USBH_HcRhDescriptorA_POTPGT_Pos) * 2);
-
- // Clear Interrrupt Status
- USBH->HcInterruptStatus |= USBH->HcInterruptStatus;
- // Enable interrupts we care about
- USBH->HcInterruptEnable = OR_INTR_ENABLE_MIE | OR_INTR_ENABLE_WDH | OR_INTR_ENABLE_RHSC;
-
- NVIC_SetVector(USBH_IRQn, (uint32_t)(_usbisr));
- NVIC_EnableIRQ(USBH_IRQn);
-
- // Check for any connected devices
- if (USBH->HcRhPortStatus[0] & OR_RH_PORT_CCS) {
- // Device connected
- wait_ms(150);
- deviceConnected(0, 1, USBH->HcRhPortStatus[0] & OR_RH_PORT_LSDA);
- }
-}
-
-uint32_t USBHALHost::controlHeadED()
-{
- return USBH->HcControlHeadED;
-}
-
-uint32_t USBHALHost::bulkHeadED()
-{
- return USBH->HcBulkHeadED;
-}
-
-uint32_t USBHALHost::interruptHeadED()
-{
- // FIXME: Only support one INT ED?
- return usb_hcca->IntTable[0];
-}
-
-void USBHALHost::updateBulkHeadED(uint32_t addr)
-{
- USBH->HcBulkHeadED = addr;
-}
-
-
-void USBHALHost::updateControlHeadED(uint32_t addr)
-{
- USBH->HcControlHeadED = addr;
-}
-
-void USBHALHost::updateInterruptHeadED(uint32_t addr)
-{
- // FIXME: Only support one INT ED?
- usb_hcca->IntTable[0] = addr;
-}
-
-
-void USBHALHost::enableList(ENDPOINT_TYPE type)
-{
- switch(type) {
- case CONTROL_ENDPOINT:
- USBH->HcCommandStatus = OR_CMD_STATUS_CLF;
- USBH->HcControl |= OR_CONTROL_CLE;
- break;
- case ISOCHRONOUS_ENDPOINT:
- // FIXME
- break;
- case BULK_ENDPOINT:
- USBH->HcCommandStatus = OR_CMD_STATUS_BLF;
- USBH->HcControl |= OR_CONTROL_BLE;
- break;
- case INTERRUPT_ENDPOINT:
- USBH->HcControl |= OR_CONTROL_PLE;
- break;
- }
-}
-
-
-bool USBHALHost::disableList(ENDPOINT_TYPE type)
-{
- switch(type) {
- case CONTROL_ENDPOINT:
- if(USBH->HcControl & OR_CONTROL_CLE) {
- USBH->HcControl &= ~OR_CONTROL_CLE;
- return true;
- }
- return false;
- case ISOCHRONOUS_ENDPOINT:
- // FIXME
- return false;
- case BULK_ENDPOINT:
- if(USBH->HcControl & OR_CONTROL_BLE){
- USBH->HcControl &= ~OR_CONTROL_BLE;
- return true;
- }
- return false;
- case INTERRUPT_ENDPOINT:
- if(USBH->HcControl & OR_CONTROL_PLE) {
- USBH->HcControl &= ~OR_CONTROL_PLE;
- return true;
- }
- return false;
- }
- return false;
-}
-
-
-void USBHALHost::memInit()
-{
- usb_hcca = (volatile HCCA *)usb_buf;
- usb_edBuf = usb_buf + HCCA_SIZE;
- usb_tdBuf = usb_buf + HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE);
-}
-
-volatile uint8_t * USBHALHost::getED()
-{
- for (int i = 0; i < MAX_ENDPOINT; i++) {
- if ( !edBufAlloc[i] ) {
- edBufAlloc[i] = true;
- return (volatile uint8_t *)(usb_edBuf + i*ED_SIZE);
- }
- }
- perror("Could not allocate ED\r\n");
- return NULL; //Could not alloc ED
-}
-
-volatile uint8_t * USBHALHost::getTD()
-{
- int i;
- for (i = 0; i < MAX_TD; i++) {
- if ( !tdBufAlloc[i] ) {
- tdBufAlloc[i] = true;
- return (volatile uint8_t *)(usb_tdBuf + i*TD_SIZE);
- }
- }
- perror("Could not allocate TD\r\n");
- return NULL; //Could not alloc TD
-}
-
-
-void USBHALHost::freeED(volatile uint8_t * ed)
-{
- int i;
- i = (ed - usb_edBuf) / ED_SIZE;
- edBufAlloc[i] = false;
-}
-
-void USBHALHost::freeTD(volatile uint8_t * td)
-{
- int i;
- i = (td - usb_tdBuf) / TD_SIZE;
- tdBufAlloc[i] = false;
-}
-
-
-void USBHALHost::resetRootHub()
-{
- // Reset port1
- USBH->HcRhPortStatus[0] = OR_RH_PORT_PRS;
- while (USBH->HcRhPortStatus[0] & OR_RH_PORT_PRS);
- USBH->HcRhPortStatus[0] = OR_RH_PORT_PRSC;
-}
-
-
-void USBHALHost::_usbisr(void)
-{
- if (instHost) {
- instHost->UsbIrqhandler();
- }
-}
-
-void USBHALHost::UsbIrqhandler()
-{
- uint32_t ints = USBH->HcInterruptStatus;
-
- // Root hub status change interrupt
- if (ints & OR_INTR_STATUS_RHSC) {
- uint32_t ints_roothub = USBH->HcRhStatus;
- uint32_t ints_port1 = USBH->HcRhPortStatus[0];
- uint32_t ints_port2 = USBH->HcRhPortStatus[1];
-
- // Port1: ConnectStatusChange
- if (ints_port1 & OR_RH_PORT_CSC) {
- if (ints_roothub & OR_RH_STATUS_DRWE) {
- // When DRWE is on, Connect Status Change means a remote wakeup event.
- } else {
- if (ints_port1 & OR_RH_PORT_CCS) {
- // Root device connected
-
- // wait 150ms to avoid bounce
- wait_ms(150);
-
- //Hub 0 (root hub), Port 1 (count starts at 1), Low or High speed
- deviceConnected(0, 1, ints_port1 & OR_RH_PORT_LSDA);
- } else {
- // Root device disconnected
-
- if (!(ints & OR_INTR_STATUS_WDH)) {
- usb_hcca->DoneHead = 0;
- }
-
- // wait 200ms to avoid bounce
- wait_ms(200);
-
- deviceDisconnected(0, 1, NULL, usb_hcca->DoneHead & 0xFFFFFFFE);
-
- if (ints & OR_INTR_STATUS_WDH) {
- usb_hcca->DoneHead = 0;
- USBH->HcInterruptStatus = OR_INTR_STATUS_WDH;
- }
- }
- }
- USBH->HcRhPortStatus[0] = OR_RH_PORT_CSC;
- }
- // Port1: Reset completed
- if (ints_port1 & OR_RH_PORT_PRSC) {
- USBH->HcRhPortStatus[0] = OR_RH_PORT_PRSC;
- }
- // Port1: PortEnableStatusChange
- if (ints_port1 & OR_RH_PORT_PESC) {
- USBH->HcRhPortStatus[0] = OR_RH_PORT_PESC;
- }
-
- // Port2: PortOverCurrentIndicatorChange
- if (ints_port2 & OR_RH_PORT_OCIC) {
- USBH->HcRhPortStatus[1] = OR_RH_PORT_OCIC;
- }
-
- USBH->HcInterruptStatus = OR_INTR_STATUS_RHSC;
- }
-
- // Writeback Done Head interrupt
- if (ints & OR_INTR_STATUS_WDH) {
- transferCompleted(usb_hcca->DoneHead & 0xFFFFFFFE);
- USBH->HcInterruptStatus = OR_INTR_STATUS_WDH;
- }
-
-
-}
-#endif