Martin Kojtal
a
Fork of
USBDevice
by 
mbed official
Diff: USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/inc/usb0_function_dmacdrv.h
- Revision:
- 71:53949e6131f6
- Parent:
- 70:2c525a50f1b6
--- a/USBDevice/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/inc/usb0_function_dmacdrv.h Thu Jul 20 10:14:36 2017 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,142 +0,0 @@
-/*******************************************************************************
-* DISCLAIMER
-* This software is supplied by Renesas Electronics Corporation and is only
-* intended for use with Renesas products. No other uses are authorized. This
-* software is owned by Renesas Electronics Corporation and is protected under
-* all applicable laws, including copyright laws.
-* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
-* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
-* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
-* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
-* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
-* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
-* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
-* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
-* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-* Renesas reserves the right, without notice, to make changes to this software
-* and to discontinue the availability of this software. By using this software,
-* you agree to the additional terms and conditions found by accessing the
-* following link:
-* http://www.renesas.com/disclaimer
-* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
-*******************************************************************************/
-/*******************************************************************************
-* File Name : usb0_function_dmacdrv.h
-* $Rev: 1116 $
-* $Date:: 2014-07-09 16:29:19 +0900#$
-* Description : RZ/A1H R7S72100 USB Sample Program
-*******************************************************************************/
-#ifndef USB0_FUNCTION_DMACDRV_H
-#define USB0_FUNCTION_DMACDRV_H
-
-
-/*******************************************************************************
-Includes <System Includes> , "Project Includes"
-*******************************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*******************************************************************************
-Typedef definitions
-*******************************************************************************/
-typedef struct dmac_transinfo
-{
- uint32_t src_addr; /* Transfer source address */
- uint32_t dst_addr; /* Transfer destination address */
- uint32_t count; /* Transfer byte count */
- uint32_t src_size; /* Transfer source data size */
- uint32_t dst_size; /* Transfer destination data size */
- uint32_t saddr_dir; /* Transfer source address direction */
- uint32_t daddr_dir; /* Transfer destination address direction */
-} dmac_transinfo_t;
-
-
-/*******************************************************************************
-Macro definitions
-*******************************************************************************/
-/* ==== Transfer specification of the sample program ==== */
-#define DMAC_SAMPLE_SINGLE (0) /* Single transfer */
-#define DMAC_SAMPLE_CONTINUATION (1) /* Continuous transfer (use REN bit) */
-
-/* ==== DMA modes ==== */
-#define DMAC_MODE_REGISTER (0) /* Register mode */
-#define DMAC_MODE_LINK (1) /* Link mode */
-
-/* ==== Transfer requests ==== */
-#define DMAC_REQ_MODE_EXT (0) /* External request */
-#define DMAC_REQ_MODE_PERI (1) /* On-chip peripheral module request */
-#define DMAC_REQ_MODE_SOFT (2) /* Auto-request (request by software) */
-
-/* ==== DMAC transfer sizes ==== */
-#define DMAC_TRANS_SIZE_8 (0) /* 8 bits */
-#define DMAC_TRANS_SIZE_16 (1) /* 16 bits */
-#define DMAC_TRANS_SIZE_32 (2) /* 32 bits */
-#define DMAC_TRANS_SIZE_64 (3) /* 64 bits */
-#define DMAC_TRANS_SIZE_128 (4) /* 128 bits */
-#define DMAC_TRANS_SIZE_256 (5) /* 256 bits */
-#define DMAC_TRANS_SIZE_512 (6) /* 512 bits */
-#define DMAC_TRANS_SIZE_1024 (7) /* 1024 bits */
-
-/* ==== Address increment for transferring ==== */
-#define DMAC_TRANS_ADR_NO_INC (1) /* Not increment */
-#define DMAC_TRANS_ADR_INC (0) /* Increment */
-
-/* ==== Method for detecting DMA request ==== */
-#define DMAC_REQ_DET_FALL (0) /* Falling edge detection */
-#define DMAC_REQ_DET_RISE (1) /* Rising edge detection */
-#define DMAC_REQ_DET_LOW (2) /* Low level detection */
-#define DMAC_REQ_DET_HIGH (3) /* High level detection */
-
-/* ==== Request Direction ==== */
-#define DMAC_REQ_DIR_SRC (0) /* DMAREQ is the source/ DMAACK is active when reading */
-#define DMAC_REQ_DIR_DST (1) /* DMAREQ is the destination/ DMAACK is active when writing */
-
-/* ==== Descriptors ==== */
-#define DMAC_DESC_HEADER (0) /* Header */
-#define DMAC_DESC_SRC_ADDR (1) /* Source Address */
-#define DMAC_DESC_DST_ADDR (2) /* Destination Address */
-#define DMAC_DESC_COUNT (3) /* Transaction Byte */
-#define DMAC_DESC_CHCFG (4) /* Channel Confg */
-#define DMAC_DESC_CHITVL (5) /* Channel Interval */
-#define DMAC_DESC_CHEXT (6) /* Channel Extension */
-#define DMAC_DESC_LINK_ADDR (7) /* Link Address */
-
-/* ==== On-chip peripheral module requests ===== */
-typedef enum dmac_request_factor
-{
- DMAC_REQ_USB0_DMA0_TX, /* USB_0 channel 0 transmit FIFO empty */
- DMAC_REQ_USB0_DMA0_RX, /* USB_0 channel 0 receive FIFO full */
- DMAC_REQ_USB0_DMA1_TX, /* USB_0 channel 1 transmit FIFO empty */
- DMAC_REQ_USB0_DMA1_RX, /* USB_0 channel 1 receive FIFO full */
- DMAC_REQ_USB1_DMA0_TX, /* USB_1 channel 0 transmit FIFO empty */
- DMAC_REQ_USB1_DMA0_RX, /* USB_1 channel 0 receive FIFO full */
- DMAC_REQ_USB1_DMA1_TX, /* USB_1 channel 1 transmit FIFO empty */
- DMAC_REQ_USB1_DMA1_RX, /* USB_1 channel 1 receive FIFO full */
-} dmac_request_factor_t;
-
-
-/*******************************************************************************
-Exported global variables and functions (to be accessed by other files)
-*******************************************************************************/
-void usb0_function_DMAC1_PeriReqInit(const dmac_transinfo_t *trans_info, uint32_t dmamode, uint32_t continuation,
- uint32_t request_factor, uint32_t req_direction);
-int32_t usb0_function_DMAC1_Open(uint32_t req);
-void usb0_function_DMAC1_Close(uint32_t *remain);
-void usb0_function_DMAC1_Load_Set(uint32_t src_addr, uint32_t dst_addr, uint32_t count);
-
-void usb0_function_DMAC2_PeriReqInit(const dmac_transinfo_t *trans_info, uint32_t dmamode, uint32_t continuation,
- uint32_t request_factor, uint32_t req_direction);
-int32_t usb0_function_DMAC2_Open(uint32_t req);
-void usb0_function_DMAC2_Close(uint32_t *remain);
-void usb0_function_DMAC2_Load_Set(uint32_t src_addr, uint32_t dst_addr, uint32_t count);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* USB0_FUNCTION_DMACDRV_H */
-
-/* End of File */