No changes made

Fork of BSP_DISCO_F746NG by ST

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers stm32746g_discovery_audio.h Source File

stm32746g_discovery_audio.h

Go to the documentation of this file.
00001 /**
00002   ******************************************************************************
00003   * @file    stm32746g_discovery_audio.h
00004   * @author  MCD Application Team
00005   * @version V2.0.0
00006   * @date    30-December-2016
00007   * @brief   This file contains the common defines and functions prototypes for
00008   *          the stm32746g_discovery_audio.c driver.
00009   ******************************************************************************
00010   * @attention
00011   *
00012   * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
00013   *
00014   * Redistribution and use in source and binary forms, with or without modification,
00015   * are permitted provided that the following conditions are met:
00016   *   1. Redistributions of source code must retain the above copyright notice,
00017   *      this list of conditions and the following disclaimer.
00018   *   2. Redistributions in binary form must reproduce the above copyright notice,
00019   *      this list of conditions and the following disclaimer in the documentation
00020   *      and/or other materials provided with the distribution.
00021   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00022   *      may be used to endorse or promote products derived from this software
00023   *      without specific prior written permission.
00024   *
00025   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00026   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00027   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00028   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00029   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00030   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00031   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00032   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00033   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00034   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00035   *
00036   ******************************************************************************
00037   */
00038 
00039 /* Define to prevent recursive inclusion -------------------------------------*/
00040 #ifndef __STM32746G_DISCOVERY_AUDIO_H
00041 #define __STM32746G_DISCOVERY_AUDIO_H
00042 
00043 #ifdef __cplusplus
00044  extern "C" {
00045 #endif 
00046 
00047 /* Includes ------------------------------------------------------------------*/
00048 /* Include audio component Driver */
00049 #include "../Components/wm8994/wm8994.h"
00050 #include "stm32746g_discovery.h"
00051 
00052 /** @addtogroup BSP
00053   * @{
00054   */ 
00055 
00056 /** @addtogroup STM32746G_DISCOVERY
00057   * @{
00058   */
00059     
00060 /** @defgroup STM32746G_DISCOVERY_AUDIO STM32746G_DISCOVERY_AUDIO
00061   * @{
00062   */
00063 
00064 /** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Types STM32746G_DISCOVERY_AUDIO Exported Types
00065   * @{
00066   */
00067 /**
00068   * @}
00069   */ 
00070 
00071 /** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Constants STM32746G_DISCOVERY_AUDIO Exported Constants
00072   * @{
00073   */
00074  
00075 /*------------------------------------------------------------------------------
00076                           USER SAI defines parameters
00077  -----------------------------------------------------------------------------*/
00078 /*  CODEC_AudioFrame_SLOT_TDMMode 
00079    In W8994 codec the Audio frame contains 4 slots : TDM Mode
00080    TDM format :
00081    +------------------|------------------|--------------------|-------------------+ 
00082    | CODEC_SLOT0 Left | CODEC_SLOT1 Left | CODEC_SLOT0 Right  | CODEC_SLOT1 Right |
00083    +------------------------------------------------------------------------------+
00084   */
00085 /* To have 2 separate audio stream in Both headphone and speaker the 4 slot must be activated */
00086 #define CODEC_AUDIOFRAME_SLOT_0123           SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1 | SAI_SLOTACTIVE_2 | SAI_SLOTACTIVE_3
00087 /* To have an audio stream in headphone only SAI Slot 0 and Slot 2 must be activated */ 
00088 #define CODEC_AUDIOFRAME_SLOT_02             SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_2
00089 /* To have an audio stream in speaker only SAI Slot 1 and Slot 3 must be activated */ 
00090 #define CODEC_AUDIOFRAME_SLOT_13             SAI_SLOTACTIVE_1 | SAI_SLOTACTIVE_3
00091 
00092 /* SAI OUT peripheral configuration defines */
00093 #define AUDIO_OUT_SAIx                           SAI2_Block_A
00094 #define AUDIO_OUT_SAIx_CLK_ENABLE()              __HAL_RCC_SAI2_CLK_ENABLE()
00095 #define AUDIO_OUT_SAIx_CLK_DISABLE()             __HAL_RCC_SAI2_CLK_DISABLE()
00096 #define AUDIO_OUT_SAIx_SCK_AF                    GPIO_AF10_SAI2
00097 #define AUDIO_OUT_SAIx_FS_SD_MCLK_AF             GPIO_AF10_SAI2
00098 
00099 #define AUDIO_OUT_SAIx_MCLK_ENABLE()             __HAL_RCC_GPIOI_CLK_ENABLE()
00100 #define AUDIO_OUT_SAIx_MCLK_GPIO_PORT            GPIOI
00101 #define AUDIO_OUT_SAIx_MCLK_PIN                  GPIO_PIN_4
00102 #define AUDIO_OUT_SAIx_SCK_SD_ENABLE()           __HAL_RCC_GPIOI_CLK_ENABLE()
00103 #define AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT          GPIOI
00104 #define AUDIO_OUT_SAIx_SCK_PIN                   GPIO_PIN_5
00105 #define AUDIO_OUT_SAIx_SD_PIN                    GPIO_PIN_6
00106 #define AUDIO_OUT_SAIx_FS_ENABLE()               __HAL_RCC_GPIOI_CLK_ENABLE()
00107 #define AUDIO_OUT_SAIx_FS_GPIO_PORT              GPIOI
00108 #define AUDIO_OUT_SAIx_FS_PIN                    GPIO_PIN_7
00109 
00110 /* SAI DMA Stream definitions */
00111 #define AUDIO_OUT_SAIx_DMAx_CLK_ENABLE()         __HAL_RCC_DMA2_CLK_ENABLE()
00112 #define AUDIO_OUT_SAIx_DMAx_STREAM               DMA2_Stream4
00113 #define AUDIO_OUT_SAIx_DMAx_CHANNEL              DMA_CHANNEL_3
00114 #define AUDIO_OUT_SAIx_DMAx_IRQ                  DMA2_Stream4_IRQn
00115 #define AUDIO_OUT_SAIx_DMAx_PERIPH_DATA_SIZE     DMA_PDATAALIGN_HALFWORD
00116 #define AUDIO_OUT_SAIx_DMAx_MEM_DATA_SIZE        DMA_MDATAALIGN_HALFWORD
00117 #define DMA_MAX_SZE                              ((uint16_t)0xFFFF)
00118    
00119 #define AUDIO_OUT_SAIx_DMAx_IRQHandler           DMA2_Stream4_IRQHandler
00120 
00121 /* Select the interrupt preemption priority for the DMA interrupt */
00122 #define AUDIO_OUT_IRQ_PREPRIO                    ((uint32_t)0x0E)   /* Select the preemption priority level(0 is the highest) */
00123 
00124 /*------------------------------------------------------------------------------
00125                         AUDIO IN CONFIGURATION
00126 ------------------------------------------------------------------------------*/
00127 /* SAI IN peripheral configuration defines */
00128 #define AUDIO_IN_SAIx                            SAI2_Block_B
00129 #define AUDIO_IN_SAIx_CLK_ENABLE()               __HAL_RCC_SAI2_CLK_ENABLE()
00130 #define AUDIO_IN_SAIx_CLK_DISABLE()              __HAL_RCC_SAI2_CLK_DISABLE()
00131 #define AUDIO_IN_SAIx_SD_AF                      GPIO_AF10_SAI2
00132 
00133 #define AUDIO_IN_SAIx_SD_ENABLE()                __HAL_RCC_GPIOG_CLK_ENABLE()
00134 #define AUDIO_IN_SAIx_SD_GPIO_PORT               GPIOG
00135 #define AUDIO_IN_SAIx_SD_PIN                     GPIO_PIN_10
00136 
00137 #define AUDIO_IN_INT_GPIO_ENABLE()               __HAL_RCC_GPIOH_CLK_ENABLE()
00138 #define AUDIO_IN_INT_GPIO_PORT                   GPIOH
00139 #define AUDIO_IN_INT_GPIO_PIN                    GPIO_PIN_15
00140 #define AUDIO_IN_INT_IRQ                         EXTI15_10_IRQn
00141 
00142 /* SAI DMA Stream definitions */
00143 #define AUDIO_IN_SAIx_DMAx_CLK_ENABLE()          __HAL_RCC_DMA2_CLK_ENABLE()
00144 #define AUDIO_IN_SAIx_DMAx_STREAM                DMA2_Stream7
00145 #define AUDIO_IN_SAIx_DMAx_CHANNEL               DMA_CHANNEL_0
00146 #define AUDIO_IN_SAIx_DMAx_IRQ                   DMA2_Stream7_IRQn
00147 #define AUDIO_IN_SAIx_DMAx_PERIPH_DATA_SIZE      DMA_PDATAALIGN_HALFWORD
00148 #define AUDIO_IN_SAIx_DMAx_MEM_DATA_SIZE         DMA_MDATAALIGN_HALFWORD
00149 
00150 #define AUDIO_IN_SAIx_DMAx_IRQHandler            DMA2_Stream7_IRQHandler
00151 #define AUDIO_IN_INT_IRQHandler                  EXTI15_10_IRQHandler
00152 
00153 /* Select the interrupt preemption priority and subpriority for the IT/DMA interrupt */
00154 #define AUDIO_IN_IRQ_PREPRIO                     ((uint32_t)0x0F)   /* Select the preemption priority level(0 is the highest) */
00155 
00156 /*------------------------------------------------------------------------------
00157              CONFIGURATION: Audio Driver Configuration parameters
00158 ------------------------------------------------------------------------------*/
00159 
00160 #define AUDIODATA_SIZE                      ((uint16_t)2)   /* 16-bits audio data size */
00161 
00162 /* Audio status definition */     
00163 #define AUDIO_OK                            ((uint8_t)0)
00164 #define AUDIO_ERROR                         ((uint8_t)1)
00165 #define AUDIO_TIMEOUT                       ((uint8_t)2)
00166 
00167 /* AudioFreq * DataSize (2 bytes) * NumChannels (Stereo: 2) */
00168 #define DEFAULT_AUDIO_IN_FREQ               I2S_AUDIOFREQ_16K
00169 #define DEFAULT_AUDIO_IN_BIT_RESOLUTION     ((uint8_t)16)
00170 #define DEFAULT_AUDIO_IN_CHANNEL_NBR        ((uint8_t)2) /* Mono = 1, Stereo = 2 */
00171 #define DEFAULT_AUDIO_IN_VOLUME             ((uint16_t)64)
00172 
00173 /*------------------------------------------------------------------------------
00174                     OPTIONAL Configuration defines parameters
00175 ------------------------------------------------------------------------------*/
00176 
00177 /* Delay for the Codec to be correctly reset */
00178 #define CODEC_RESET_DELAY                   ((uint8_t)5)
00179    
00180 
00181 /*------------------------------------------------------------------------------
00182                             OUTPUT DEVICES definition
00183 ------------------------------------------------------------------------------*/
00184 /* Alias on existing output devices to adapt for 2 headphones output */
00185 #define OUTPUT_DEVICE_HEADPHONE1 OUTPUT_DEVICE_HEADPHONE
00186 #define OUTPUT_DEVICE_HEADPHONE2 OUTPUT_DEVICE_SPEAKER /* Headphone2 is connected to Speaker output of the wm8994 */
00187    
00188 /**
00189   * @}
00190   */
00191  
00192 /** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Variables STM32746G_DISCOVERY_AUDIO Exported Variables
00193   * @{
00194   */
00195 extern __IO uint16_t AudioInVolume;
00196  /**
00197   * @}
00198   */
00199    
00200 /** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Macros STM32746G_DISCOVERY_AUDIO Exported Macros
00201   * @{
00202   */
00203 #define DMA_MAX(x)           (((x) <= DMA_MAX_SZE)? (x):DMA_MAX_SZE)
00204 /**
00205   * @}
00206   */ 
00207 
00208 /** @addtogroup STM32746G_DISCOVERY_AUDIO_OUT_Exported_Functions
00209   * @{
00210   */
00211 uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
00212 uint8_t BSP_AUDIO_OUT_Play(uint16_t* pBuffer, uint32_t Size);
00213 void    BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size);
00214 uint8_t BSP_AUDIO_OUT_Pause(void);
00215 uint8_t BSP_AUDIO_OUT_Resume(void);
00216 uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option);
00217 uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume);
00218 void    BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq);
00219 void    BSP_AUDIO_OUT_SetAudioFrameSlot(uint32_t AudioFrameSlot);
00220 uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd);
00221 uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output);
00222 void    BSP_AUDIO_OUT_DeInit(void);
00223 
00224 /* User Callbacks: user has to implement these functions in his code if they are needed. */
00225 /* This function is called when the requested data has been completely transferred.*/
00226 void    BSP_AUDIO_OUT_TransferComplete_CallBack(void);
00227 
00228 /* This function is called when half of the requested buffer has been transferred. */
00229 void    BSP_AUDIO_OUT_HalfTransfer_CallBack(void);
00230 
00231 /* This function is called when an Interrupt due to transfer error on or peripheral
00232    error occurs. */
00233 void    BSP_AUDIO_OUT_Error_CallBack(void);
00234 
00235 /* These function can be modified in case the current settings (e.g. DMA stream)
00236    need to be changed for specific application needs */
00237 void  BSP_AUDIO_OUT_ClockConfig(SAI_HandleTypeDef *hsai, uint32_t AudioFreq, void *Params);
00238 void  BSP_AUDIO_OUT_MspInit(SAI_HandleTypeDef *hsai, void *Params);
00239 void  BSP_AUDIO_OUT_MspDeInit(SAI_HandleTypeDef *hsai, void *Params);
00240 
00241 /**
00242   * @}
00243   */ 
00244 
00245 /** @defgroup STM32746G_DISCOVERY_AUDIO_IN_Exported_Functions STM32746G_DISCOVERY_AUDIO_IN Exported Functions
00246   * @{
00247   */
00248 uint8_t BSP_AUDIO_IN_Init(uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr);
00249 uint8_t BSP_AUDIO_IN_InitEx(uint16_t InputDevice, uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr);
00250 uint8_t BSP_AUDIO_IN_OUT_Init(uint16_t InputDevice, uint16_t OutputDevice, uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr);
00251 uint8_t BSP_AUDIO_IN_Record(uint16_t *pData, uint32_t Size);
00252 uint8_t BSP_AUDIO_IN_Stop(uint32_t Option);
00253 uint8_t BSP_AUDIO_IN_Pause(void);
00254 uint8_t BSP_AUDIO_IN_Resume(void);
00255 uint8_t BSP_AUDIO_IN_SetVolume(uint8_t Volume);
00256 void    BSP_AUDIO_IN_DeInit(void);
00257 /* User Callbacks: user has to implement these functions in his code if they are needed. */
00258 /* This function should be implemented by the user application.
00259    It is called into this driver when the current buffer is filled to prepare the next
00260    buffer pointer and its size. */
00261 void    BSP_AUDIO_IN_TransferComplete_CallBack(void);
00262 void    BSP_AUDIO_IN_HalfTransfer_CallBack(void);
00263 
00264 /* This function is called when an Interrupt due to transfer error on or peripheral
00265    error occurs. */
00266 void    BSP_AUDIO_IN_Error_CallBack(void);
00267 
00268 /* These function can be modified in case the current settings (e.g. DMA stream)
00269    need to be changed for specific application needs */
00270 void  BSP_AUDIO_IN_MspInit(SAI_HandleTypeDef *hsai, void *Params);
00271 void  BSP_AUDIO_IN_MspDeInit(SAI_HandleTypeDef *hsai, void *Params);
00272 
00273 /**
00274   * @}
00275   */ 
00276 
00277 /**
00278   * @}
00279   */ 
00280 
00281 /**
00282   * @}
00283   */
00284 
00285 /**
00286   * @}
00287   */
00288 
00289 #ifdef __cplusplus
00290 }
00291 #endif
00292 
00293 #endif /* __STM32746G_DISCOVERY_AUDIO_H */
00294 
00295 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/