Simulated product dispenser

Dependencies:   HTS221

Fork of mbed-cloud-workshop-connect-HTS221 by Jim Carver

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers sn_coap_protocol_internal.h Source File

sn_coap_protocol_internal.h

Go to the documentation of this file.
00001 /*
00002  * Copyright (c) 2011-2015 ARM Limited. All rights reserved.
00003  * SPDX-License-Identifier: Apache-2.0
00004  * Licensed under the Apache License, Version 2.0 (the License); you may
00005  * not use this file except in compliance with the License.
00006  * You may obtain a copy of the License at
00007  *
00008  * http://www.apache.org/licenses/LICENSE-2.0
00009  *
00010  * Unless required by applicable law or agreed to in writing, software
00011  * distributed under the License is distributed on an AS IS BASIS, WITHOUT
00012  * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
00013  * See the License for the specific language governing permissions and
00014  * limitations under the License.
00015  */
00016 
00017 /**
00018  * \file sn_coap_protocol_internal.h
00019  *
00020  * \brief Header file for CoAP Protocol part
00021  *
00022  */
00023 
00024 #ifndef SN_COAP_PROTOCOL_INTERNAL_H_
00025 #define SN_COAP_PROTOCOL_INTERNAL_H_
00026 
00027 #include "ns_list.h"
00028 #include "sn_coap_header_internal.h"
00029 #include "mbed-coap/sn_config.h"
00030 
00031 #ifdef __cplusplus
00032 extern "C" {
00033 #endif
00034 
00035 struct sn_coap_hdr_;
00036 
00037 /* * * * * * * * * * * */
00038 /* * * * DEFINES * * * */
00039 /* * * * * * * * * * * */
00040 
00041 /* * For Message resending * */
00042 #ifdef SN_COAP_DISABLE_RESENDINGS
00043 #define ENABLE_RESENDINGS                               0 /* Disable resendings */
00044 #else
00045 #define ENABLE_RESENDINGS                               1   /**< Enable / Disable resending from library in building */
00046 #endif
00047 
00048 #define SN_COAP_RESENDING_MAX_COUNT                     3   /**< Default number of re-sendings  */
00049 
00050 #ifdef YOTTA_CFG_COAP_RESENDING_QUEUE_SIZE_MSGS
00051 #define SN_COAP_RESENDING_QUEUE_SIZE_MSGS YOTTA_CFG_COAP_RESENDING_QUEUE_SIZE_MSGS
00052 #elif defined MBED_CONF_MBED_CLIENT_SN_COAP_RESENDING_QUEUE_SIZE_MSGS
00053 #define SN_COAP_RESENDING_QUEUE_SIZE_MSGS MBED_CONF_MBED_CLIENT_SN_COAP_RESENDING_QUEUE_SIZE_MSGS
00054 #endif
00055 
00056 #ifndef SN_COAP_RESENDING_QUEUE_SIZE_MSGS
00057 #define SN_COAP_RESENDING_QUEUE_SIZE_MSGS               2   /**< Default re-sending queue size - defines how many messages can be stored. Setting this to 0 disables feature */
00058 #endif
00059 
00060 #ifdef YOTTA_CFG_COAP_RESENDING_QUEUE_SIZE_BYTES
00061 #define SN_COAP_RESENDING_QUEUE_SIZE_BYTES YOTTA_CFG_COAP_RESENDING_QUEUE_SIZE_BYTES
00062 #elif defined MBED_CONF_MBED_CLIENT_SN_COAP_RESENDING_QUEUE_SIZE_BYTES
00063 #define SN_COAP_RESENDING_QUEUE_SIZE_BYTES MBED_CONF_MBED_CLIENT_SN_COAP_RESENDING_QUEUE_SIZE_BYTES
00064 #endif
00065 
00066 #ifndef SN_COAP_RESENDING_QUEUE_SIZE_BYTES
00067 #define SN_COAP_RESENDING_QUEUE_SIZE_BYTES              0   /**< Default re-sending queue size - defines size of the re-sending buffer. Setting this to 0 disables feature */
00068 #endif
00069 
00070 #define DEFAULT_RESPONSE_TIMEOUT                        10  /**< Default re-sending timeout as seconds */
00071 
00072 /* These parameters sets maximum values application can set with API */
00073 #define SN_COAP_MAX_ALLOWED_RESENDING_COUNT             6   /**< Maximum allowed count of re-sending */
00074 #define SN_COAP_MAX_ALLOWED_RESENDING_BUFF_SIZE_MSGS    6   /**< Maximum allowed number of saved re-sending messages */
00075 #define SN_COAP_MAX_ALLOWED_RESENDING_BUFF_SIZE_BYTES   512 /**< Maximum allowed size of re-sending buffer */
00076 #define SN_COAP_MAX_ALLOWED_RESPONSE_TIMEOUT            40  /**< Maximum allowed re-sending timeout */
00077 
00078 #define RESPONSE_RANDOM_FACTOR                          1.5   /**< Resending random factor, value is specified in IETF CoAP specification */
00079 
00080 /* * For Message duplication detecting * */
00081 
00082 /* Init value for the maximum count of messages to be stored for duplication detection          */
00083 /* Setting of this value to 0 will disable duplication check, also reduce use of ROM memory     */
00084 
00085 // Keep the old flag to maintain backward compatibility
00086 #ifndef SN_COAP_DUPLICATION_MAX_MSGS_COUNT
00087 #define SN_COAP_DUPLICATION_MAX_MSGS_COUNT              0
00088 #endif
00089 
00090 #ifdef YOTTA_CFG_COAP_DUPLICATION_MAX_MSGS_COUNT
00091 #define SN_COAP_DUPLICATION_MAX_MSGS_COUNT YOTTA_CFG_COAP_DUPLICATION_MAX_MSGS_COUNT
00092 #elif defined MBED_CONF_MBED_CLIENT_SN_COAP_DUPLICATION_MAX_MSGS_COUNT
00093 #define SN_COAP_DUPLICATION_MAX_MSGS_COUNT MBED_CONF_MBED_CLIENT_SN_COAP_DUPLICATION_MAX_MSGS_COUNT
00094 #endif
00095 
00096 
00097 
00098 /* Maximum allowed number of saved messages for duplicate searching */
00099 #define SN_COAP_MAX_ALLOWED_DUPLICATION_MESSAGE_COUNT   6
00100 
00101 /* Maximum time in seconds of messages to be stored for duplication detection */
00102 #define SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED    60 /* RESPONSE_TIMEOUT * RESPONSE_RANDOM_FACTOR * (2 ^ MAX_RETRANSMIT - 1) + the expected maximum round trip time */
00103 
00104 /* * For Message blockwising * */
00105 
00106 /* Init value for the maximum payload size to be sent and received at one blockwise message                         */
00107 /* Setting of this value to 0 will disable this feature, and also reduce use of ROM memory                          */
00108 /* Note: This define is common for both received and sent Blockwise messages                                        */
00109 
00110 #ifdef YOTTA_CFG_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE
00111 #define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE YOTTA_CFG_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE
00112 #elif defined MBED_CONF_MBED_CLIENT_SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE
00113 #define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE MBED_CONF_MBED_CLIENT_SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE
00114 #endif
00115 
00116 #ifndef SN_COAP_BLOCKWISE_ENABLED
00117 #define SN_COAP_BLOCKWISE_ENABLED                   0  /**< Enable blockwise */
00118 #endif
00119 
00120 #ifndef SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE
00121 #define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE          0  /**< Must be 2^x and x is at least 4. Suitable values: 0, 16, 32, 64, 128, 256, 512 and 1024 */
00122 #endif
00123 
00124 #ifndef SN_COAP_MAX_NONBLOCKWISE_PAYLOAD_SIZE
00125 #define SN_COAP_MAX_NONBLOCKWISE_PAYLOAD_SIZE       0
00126 #endif
00127 
00128 #ifdef MBED_CONF_MBED_CLIENT_SN_COAP_BLOCKWISE_MAX_TIME_DATA_STORED
00129 #define SN_COAP_BLOCKWISE_MAX_TIME_DATA_STORED MBED_CONF_MBED_CLIENT_SN_COAP_BLOCKWISE_MAX_TIME_DATA_STORED
00130 #endif
00131 
00132 #ifndef SN_COAP_BLOCKWISE_MAX_TIME_DATA_STORED
00133 #define SN_COAP_BLOCKWISE_MAX_TIME_DATA_STORED      60 /**< Maximum time in seconds of data (messages and payload) to be stored for blockwising */
00134 #endif
00135 
00136 #ifdef YOTTA_CFG_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE
00137 #define SN_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE YOTTA_CFG_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE
00138 #elif defined MBED_CONF_MBED_CLIENT_SN_COAP_MAX_INCOMING_MESSAGE_SIZE
00139 #define SN_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE MBED_CONF_MBED_CLIENT_SN_COAP_MAX_INCOMING_MESSAGE_SIZE
00140 #endif
00141 
00142 #ifndef SN_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE
00143 #define SN_COAP_MAX_INCOMING_BLOCK_MESSAGE_SIZE UINT16_MAX
00144 #endif
00145 
00146 /* * For Option handling * */
00147 #define COAP_OPTION_MAX_AGE_DEFAULT                 60 /**< Default value of Max-Age if option not present */
00148 #define COAP_OPTION_URI_PORT_NONE                   (-1) /**< Internal value to represent no Uri-Port option */
00149 #define COAP_OPTION_BLOCK_NONE                      (-1) /**< Internal value to represent no Block1/2 option */
00150 
00151 
00152 int8_t prepare_blockwise_message(struct coap_s *handle, struct sn_coap_hdr_ *coap_hdr_ptr);
00153 
00154 /* Structure which is stored to Linked list for message sending purposes */
00155 typedef struct coap_send_msg_ {
00156     uint8_t             resending_counter;  /* Tells how many times message is still tried to resend */
00157     uint32_t            resending_time;     /* Tells next resending time */
00158 
00159     sn_nsdl_transmit_s *send_msg_ptr;
00160 
00161     struct coap_s       *coap;              /* CoAP library handle */
00162     void                *param;             /* Extra parameter that will be passed to TX/RX callback functions */
00163 
00164     ns_list_link_t      link;
00165 } coap_send_msg_s;
00166 
00167 typedef NS_LIST_HEAD(coap_send_msg_s, link) coap_send_msg_list_t;
00168 
00169 /* Structure which is stored to Linked list for message duplication detection purposes */
00170 typedef struct coap_duplication_info_ {
00171     uint32_t            timestamp; /* Tells when duplication information is stored to Linked list */
00172     uint16_t            msg_id;
00173     uint16_t            packet_len;
00174     uint8_t             *packet_ptr;
00175     struct coap_s       *coap;  /* CoAP library handle */
00176     sn_nsdl_addr_s      *address;
00177     void                *param;
00178     ns_list_link_t      link;
00179 } coap_duplication_info_s;
00180 
00181 typedef NS_LIST_HEAD(coap_duplication_info_s, link) coap_duplication_info_list_t;
00182 
00183 /* Structure which is stored to Linked list for blockwise messages sending purposes */
00184 typedef struct coap_blockwise_msg_ {
00185     uint32_t            timestamp;  /* Tells when Blockwise message is stored to Linked list */
00186 
00187     sn_coap_hdr_s       *coap_msg_ptr;
00188     struct coap_s       *coap;      /* CoAP library handle */
00189 
00190     void                *param;
00191     uint16_t            msg_id;
00192 
00193     ns_list_link_t      link;
00194 } coap_blockwise_msg_s;
00195 
00196 typedef NS_LIST_HEAD(coap_blockwise_msg_s, link) coap_blockwise_msg_list_t;
00197 
00198 /* Structure which is stored to Linked list for blockwise messages receiving purposes */
00199 typedef struct coap_blockwise_payload_ {
00200     uint32_t            timestamp; /* Tells when Payload is stored to Linked list */
00201 
00202     uint8_t             addr_len;
00203     uint8_t             *addr_ptr;
00204     uint16_t            port;
00205     uint32_t            block_number;
00206     uint8_t             *token_ptr;
00207     uint8_t             token_len;
00208 
00209     uint16_t            payload_len;
00210     uint8_t             *payload_ptr;
00211     struct coap_s       *coap;  /* CoAP library handle */
00212 
00213     ns_list_link_t     link;
00214 } coap_blockwise_payload_s;
00215 
00216 typedef NS_LIST_HEAD(coap_blockwise_payload_s, link) coap_blockwise_payload_list_t;
00217 
00218 struct coap_s {
00219     void *(*sn_coap_protocol_malloc)(uint16_t);
00220     void (*sn_coap_protocol_free)(void *);
00221 
00222     uint8_t (*sn_coap_tx_callback)(uint8_t *, uint16_t, sn_nsdl_addr_s *, void *);
00223     int8_t (*sn_coap_rx_callback)(sn_coap_hdr_s *, sn_nsdl_addr_s *, void *);
00224 
00225     #if ENABLE_RESENDINGS /* If Message resending is not used at all, this part of code will not be compiled */
00226         coap_send_msg_list_t linked_list_resent_msgs; /* Active resending messages are stored to this Linked list */
00227         uint16_t count_resent_msgs;
00228     #endif
00229 
00230     #if SN_COAP_DUPLICATION_MAX_MSGS_COUNT /* If Message duplication detection is not used at all, this part of code will not be compiled */
00231         coap_duplication_info_list_t  linked_list_duplication_msgs; /* Messages for duplicated messages detection is stored to this Linked list */
00232         uint16_t                      count_duplication_msgs;
00233     #endif
00234 
00235     #if SN_COAP_BLOCKWISE_ENABLED || SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE /* If Message blockwise is not enabled, this part of code will not be compiled */
00236         coap_blockwise_msg_list_t     linked_list_blockwise_sent_msgs; /* Blockwise message to to be sent is stored to this Linked list */
00237         coap_blockwise_payload_list_t linked_list_blockwise_received_payloads; /* Blockwise payload to to be received is stored to this Linked list */
00238     #endif
00239 
00240     uint32_t system_time;    /* System time seconds */
00241     uint16_t sn_coap_block_data_size;
00242     uint8_t sn_coap_resending_queue_msgs;
00243     uint32_t sn_coap_resending_queue_bytes;
00244     uint8_t sn_coap_resending_count;
00245     uint8_t sn_coap_resending_intervall;
00246     uint8_t sn_coap_duplication_buffer_size;
00247     uint8_t sn_coap_internal_block2_resp_handling; /* If this is set then coap itself sends a next GET request automatically */
00248 };
00249 
00250 #ifdef __cplusplus
00251 }
00252 #endif
00253 
00254 #endif /* SN_COAP_PROTOCOL_INTERNAL_H_ */
00255