Diff: MAG3110.h

Revision:

0:63a8594a3866

Child:

1:5a0e7a58d980

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MAG3110.h	Sun May 19 20:34:27 2013 +0000
@@ -0,0 +1,96 @@
+/* 
+ * MAG3110 Sensor Library for mbed 
+ * TODO: Add proper header
+ */
+
+#ifndef MAG3110_H
+#define MAG3110_H
+
+#include "mbed.h"
+
+#define PI 3.14159265359
+
+#define MAG_ADDR 0x1D
+
+// define registers
+#define MAG_DR_STATUS 0x00
+#define MAG_OUT_X_MSB 0x01
+#define MAG_OUT_X_LSB 0x02
+#define MAG_OUT_Y_MSB 0x03
+#define MAG_OUT_Y_LSB 0x04
+#define MAG_OUT_Z_MSB 0x05
+#define MAG_OUT_Z_LSB 0x06
+#define MAG_WHO_AM_I  0x07
+#define MAG_SYSMOD    0x08
+#define MAG_OFF_X_MSB 0x09
+#define MAG_OFF_X_LSB 0x0A
+#define MAG_OFF_Y_MSB 0x0B
+#define MAG_OFF_Y_LSB 0x0C
+#define MAG_OFF_Z_MSB 0x0D
+#define MAG_OFF_Z_LSB 0x0E
+#define MAG_DIE_TEMP  0x0F
+#define MAG_CTRL_REG1 0x10
+#define MAG_CTRL_REG2 0x11
+
+// what should WHO_AM_I return?
+#define MAG_3110_WHO_AM_I_VALUE 0xC4
+
+
+// Fields in registers
+// CTRL_REG1: dr2,dr1,dr0  os1,os0  fr tm ac
+
+// Sampling rate from 80Hz down to 0.625Hz
+#define MAG_3110_SAMPLE80 0
+#define MAG_3110_SAMPLE40 0x20
+#define MAG_3110_SAMPLE20 0x40
+#define MAG_3110_SAMPLE10 0x60
+#define MAG_3110_SAMPLE5 0x80
+#define MAG_3110_SAMPLE2_5 0xA0
+#define MAG_3110_SAMPLE1_25 0xC0
+#define MAG_3110_SAMPLE0_625 0xE0
+
+// How many samples to average (lowers data rate)
+#define MAG_3110_OVERSAMPLE1 0
+#define MAG_3110_OVERSAMPLE2 0x08
+#define MAG_3110_OVERSAMPLE3 0x10
+#define MAG_3110_OVERSAMPLE4 0x18
+
+// read only 1 byte per axis
+#define MAG_3110_FASTREAD 0x04
+// do one measurement (even if in standby mode)
+#define MAG_3110_TRIGGER 0x02
+// put in active mode
+#define MAG_3110_ACTIVE 0x01
+
+// CTRL_REG2: AUTO_MRST_EN  _ RAW MAG_RST _ _ _ _ _
+// reset sensor after each reading
+#define MAG_3110_AUTO_MRST_EN 0x80
+// don't subtract user offsets
+#define MAG_3110_RAW 0x20
+// reset magnetic sensor after too-large field
+#define MAG_3110_MAG_RST 0x10
+
+// DR_STATUS Register ZYXOW ZOW YOW XOW ZYXDR ZDR YDR XDR
+#define MAG_3110_ZYXDR  0x08
+
+class MAG3110
+{
+    private:
+        short _i2c_address;
+        I2C *_i2c;
+        Serial *_pc;
+        bool _debug;
+        int _avgX, _avgY;   //, _newX, _tempXmin, _tempXmax, _newY, _tempYmin, _tempYmax;
+
+
+    public:
+        MAG3110(I2C *i2c);
+        MAG3110(I2C *i2c, Serial *pc); //pass serial for debug
+        void begin();
+        int readReg(char regAddr);
+        int readVal(char regAddr);
+        float getHeading();
+        void getValues(int *xVal, int *yVal, int *zVal);
+        void setCalibration(int minX, int maxX, int minY, int maxY);
+};
+#endif
\ No newline at end of file