Jack Berkhout
ArchMax_CC3000_NTP
Dependencies: NTPClient3 NVIC_set_all_priorities cc3000_hostdriver_mbedsocket mbed
Revision 0:0e8d73b27253, committed 2015-10-17
- Comitter:
- JackB
- Date:
- Sat Oct 17 23:31:20 2015 +0000
- Commit message:
- None
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/NTPClient.lib Sat Oct 17 23:31:20 2015 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/users/JackB/code/NTPClient3/#13ccddd70dcf
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/NVIC_set_all_priorities.lib Sat Oct 17 23:31:20 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/frankvnk/code/NVIC_set_all_priorities/#c19fcbd73dbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/cc3000_hostdriver_mbedsocket.lib Sat Oct 17 23:31:20 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/#192e2fde71e9
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/init.cpp Sat Oct 17 23:31:20 2015 +0000
@@ -0,0 +1,70 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "main.h"
+#include "mbed.h"
+
+#if (MY_BOARD == WIGO)
+
+#include "NVIC_set_all_priorities.h"
+
+/**
+ * \brief Wi-Go initialization
+ * \param none
+ * \return none
+ */
+void init() {
+// DigitalOut PWR_EN1(PTB2);
+// DigitalOut PWR_EN2(PTB3);
+
+ // Wi-Go set current to 500mA since we're turning on the Wi-Fi
+// PWR_EN1 = 0;
+// PWR_EN2 = 1;
+
+ NVIC_set_all_irq_priorities(3);
+// NVIC_SetPriority(SPI0_IRQn, 0x0); // Wi-Fi SPI interrupt must be higher priority than SysTick
+// NVIC_SetPriority(PORTA_IRQn, 0x1);
+ NVIC_SetPriority(SysTick_IRQn, 0x2); // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+// PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
+// PORTA->ISFR |= (1 << 16);
+}
+
+#elif (MY_BOARD == WIFI_DIPCORTEX)
+
+/**
+ * \brief Wifi DipCortex initialization
+ * \param none
+ * \return none
+ */
+void init() {
+ NVIC_SetPriority(SSP1_IRQn, 0x0);
+ NVIC_SetPriority(PIN_INT0_IRQn, 0x1);
+
+ // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+ NVIC_SetPriority(SysTick_IRQn, 0x2);
+}
+
+#else
+
+/**
+ * \brief Place here init routine for your board
+ * \param none
+ * \return none
+ */
+void init() {
+
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Oct 17 23:31:20 2015 +0000
@@ -0,0 +1,110 @@
+#include "mbed.h"
+#include "main.h"
+//#include "EthernetInterface.h"
+#include "NTPClient.h"
+//#include "NetworkAPI/buffer.hpp"
+//#include "NetworkAPI/tcp/socket.hpp"
+#include "cc3000.h"
+
+#define PORT 1234
+#define MAX_PENDING 1
+
+#define CC3000_IRQ D3 // (D3)
+#define CC3000_EN D5 // (D5)
+#define CC3000_CS D10 // (D10)
+#define CC3000_MOSI D11 // (D11)
+#define CC3000_MISO D12 // (D12)
+#define CC3000_SCLK D13 // (D13)
+
+#define SSID "Prakjaroen"
+#define PHRASE "A4B5C6D7E8F9"
+#define SECURITY WPA2
+
+#define IP "192.168.2.165"
+#define MASK "255.255.255.0"
+#define GW "192.168.2.1"
+#define DHCP 1
+
+Serial pc(USBTX, USBRX);
+
+using namespace mbed_cc3000;
+
+cc3000 wifi(CC3000_IRQ, CC3000_EN, CC3000_CS, SPI(CC3000_MOSI, CC3000_MISO, CC3000_SCLK), SSID, PHRASE, SECURITY, false); //SparkFun Board on Arduino pin definitions
+
+// array to store RM parameters from EEPROM
+unsigned char cRMParamsFromEeprom[128];
+
+// array to store MAC address from EEPROM
+unsigned char cMacFromEeprom[6];
+
+int main() {
+ init(); /* board dependent init */
+ pc.baud(230400);
+
+ printf("\r\n--------------------------------------------------------------------------------\r\n");
+ printf("cc3000 NTP client demo.\r\n");
+#if (DHCP == 1)
+ printf("Initialize the interface using DHCP...\r\n");
+ printf("wifi.init() ");
+ wifi.init();
+#else
+ printf("Initialize the interface using a static IP address...\r\n");
+ printf("wifi.init(%s, %s, %s) ", IP, MASK, GW);
+ wifi.init(IP, MASK, GW);
+#endif
+ printf("done.\r\n");
+ printf("wifi.connect() ");
+ if (wifi.connect() == -1) {
+ printf("failed.\r\n");
+ printf("Failed to connect. Please verify connection details and try again. \r\n");
+ } else {
+ printf("done.\r\n");
+ printf("IP address: %s \r\n", wifi.getIPAddress());
+ }
+
+ NTPClient ntp_client;
+ time_t ct_time;
+ char time_buffer[80];
+ char time_buffer_old[80];
+ wait(1);
+
+ strcpy(time_buffer_old, "");
+
+ // Parameters
+ char* domain_name = "0.uk.pool.ntp.org";
+ int port_number = 123;
+
+ // Read time from server
+ printf("Reading time...\r\n");
+ ntp_client.setTime(domain_name, port_number);
+
+// ct_time = time(NULL);
+// strftime(time_buffer, 80, "%a %b %d %T %p %z %Z\n", localtime(&ct_time));
+// printf("UTC/GMT: %s\n", time_buffer);
+// printf("UTC %s\n", ctime(&ct_time));
+
+ // Choose standard or daylight savings time, comment out other
+// ct_time= time(NULL) + 3600; // Winter time - Convert to Europe/Amsterdam Time
+ ct_time = time(NULL) + 7200; // Summer time - Convert to Europe/Amsterdam Time
+ set_time(ct_time);
+
+// ct_time = time(NULL);
+ strftime(time_buffer, 80, "%a %d-%b-%Y %T", localtime(&ct_time));
+ printf("%s\r\n", time_buffer);
+
+ while (1) {
+ ct_time = time(NULL);
+ strftime(time_buffer, 80, "%S", localtime(&ct_time));
+ if (strcmp(time_buffer, time_buffer_old) != 0) {
+ strcpy(time_buffer_old, time_buffer);
+ strftime(time_buffer, 80, "%a %d-%b-%Y %T", localtime(&ct_time));
+ printf("%s\r\n", time_buffer);
+ // Sync ones a day
+ strftime(time_buffer, 80, "%T", localtime(&ct_time));
+ if (strcmp(time_buffer, "00:00:00") == 0) {
+ ntp_client.setTime(domain_name, port_number);
+ }
+ }
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.h Sat Oct 17 23:31:20 2015 +0000 @@ -0,0 +1,21 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MAIN_H +#define MAIN_H + +void init(); + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat Oct 17 23:31:20 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/34e6b704fe68 \ No newline at end of file