File content as of revision 0:24d3eb812fd4:

# Easy Connect - Easily add all supported connectivity methods to your mbed OS project

You may want to give the users of your application the possibility to switch between connectivity methods. The `NetworkInterface` API makes this easy, but you still need a mechanism for the user to chooce the method,  and perhaps throw in some `#define`'s. Easy Connect handles all of this for you. Just declare the desired connectivity method in your `mbed_app.json` file and call `easy_connect()` from your application.

## Specifying the connectivity method

Add the following to your `mbed_app.json` file:

```json
{
    "config": {
        "network-interface":{
            "help": "options are ETHERNET, WIFI_ESP8266, WIFI_IDW0XX1, WIFI_ODIN, WIFI_RTW, WIFI_WIZFI310, WIFI_ISM43362, MESH_LOWPAN_ND, MESH_THREAD, CELLULAR_ONBOARD",
            "value": "ETHERNET"
        }
    },
    "target_overrides": {
        "*": {
            "target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
            "mbed-mesh-api.6lowpan-nd-channel-page": 0,
            "mbed-mesh-api.6lowpan-nd-channel": 12
        }
    }
}
```

### UBLOX ODIN/Ethernet

#### Mbed OS 5.8 and older

If you select `ETHERNET` with `UBLOX_ODIN_EVK_W2` you must add this to your `target-overrides` section in `mbed_app.json`:

```json
            "UBLOX_EVK_ODIN_W2": {
            "target.device_has_remove": ["EMAC"]
            }
```

#### Mbed OS 5.9 and newer

With Mbed OS 5.9, the EMAC SW was refactored and a default network selector is used instead. You must add the following `target-overrides` section to `mbed_app.json`:

```json
        "UBLOX_EVK_ODIN_W2": {
             "target.network-default-interface-type": "ETHERNET"
       }
```

### Other WiFi stacks

If you select `WIFI_ESP8266`, `WIFI_IDW0XX1`, `WIFI_ODIN` or `WIFI_RTW`, `WIFI_WIZFI310` you also need to add the WiFi SSID and password:

```json
    "config": {
        "network-interface":{
            "help": "options are ETHERNET, WIFI_ESP8266, WIFI_IDW0XX1, WIFI_ODIN, WIFI_RTW, WIFI_WIZFI310, WIFI_ISM43362, MESH_LOWPAN_ND, MESH_THREAD, CELLULAR_ONBOARD",
            "value": "WIFI_ESP8266"
        },
        "wifi-ssid": {
            "value": "\"SSID\""
        },
        "wifi-password": {
            "value": "\"Password\""
        }
    }
```

If you use `MESH_LOWPAN_ND` or `MESH_THREAD` you need to specify your radio module:

```json
    "config": {
        "network-interface":{
            "help": "options are ETHERNET, WIFI_ESP8266, WIFI_IDW0XX1, WIFI_ODIN, WIFI_RTW, WIFI_WIZFI310, MESH_LOWPAN_ND, MESH_THREAD, CELLULAR_ONBOARD",
            "value": "MESH_LOWPAN_ND"
        },
        "mesh_radio_type": {
        	"help": "options are ATMEL, MCR20, SPIRIT1, EFR32",
        	"value": "ATMEL"
        }
    }
```

### CELLULAR_ONBOARD

If you use [`CELLULAR_ONBOARD`](https://docs.mbed.com/docs/mbed-os-api-reference/en/latest/APIs/communication/cellular/) you must specify the following:

```json
    "target_overrides": {
        "*": {
            "ppp-cell-iface.apn-lookup": true
        }
    }
```
...and you may also need to specify one or more of the following:

```json
    "config": {
        "cellular-apn": {
            "help": "Please provide the APN string for your SIM if it is not already included in APN_db.h.",
            "value": "\"my_sims_apn\""
        },
        "cellular-username": {
            "help": "May or may not be required for your APN, please consult your SIM provider.",
            "value": "\"my_sim_apns_username\""
        },
        "cellular-password": {
            "help": "May or may not be required for your APN, please consult your SIM provider.",
            "value": "\"my_sim_apns_password\""
        },
        "cellular-sim-pin": {
            "help": "Please provide the PIN for your SIM (as a four digit string) if your SIM is normally locked",
            "value": "\"1234\""
        }
    }
```

None of the optional settings need to be specified for the `UBLOX_C030_U201` cellular target, for which the APN settings are in `APN_db.h`.

## Using Easy Connect from your application

Easy Connect has just one function that returns either a `NetworkInterface`-pointer or `NULL`:

```cpp
#include "easy-connect.h"

int main(int, char**) {
    NetworkInterface* network = easy_connect(true); /* has 1 argument, enable_logging (pass in true to log to serial port) */
    if (!network) {
        printf("Connecting to the network failed... See serial output.\r\n");
        return 1;
    }

    // Rest of your program
}
```

## Using Easy connect with WiFi

The easy-connect `easy_connect()` is overloaded now for WiFi so that you can submit your WiFi SSID and password programmatically in you want
the user to be able to supply them via some means.

```cpp
#include "easy-connect.h"

int main(int, char**) {
    char* wifi_SSID = "SSID";
    char* wifi_password = "password";

    NetworkInterface* network = easy_connect(true, wifi_SSID, wifi_password); 
    if (!network) {
        printf("Connecting to the network failed... See serial output.\r\n");
        return 1;
    }

    // Rest of your program
}
```

## Overriding settings

Easy-connect was changed recently with [PR #59](https://github.com/ARMmbed/easy-connect/pull/59) - where some of the defines expected via `mbed_app.json` were
moved to the [`mbed_lib.json`](https://github.com/ARMmbed/easy-connect/blob/master/mbed_lib.json). 
This minimises the amount of lines needed (in typical cases) in the applications `mbed_app.json`. However, due to this the overrides
need to be done slightly differently, as you need to override the `easy-connect` defines.

So, for example changing the ESP8266 TX/RX pins and enable debugs - you would now have modify as below.

```json
    "target_overrides": {
        "*": {
            "easy-connect.wifi-esp8266-tx": "A1",
            "easy-connect.wifi-esp8266-rx": "A2",
            "easy-connect.wifi-esp8266-debug: true
         }
    }
```


## Configuration examples

There are many things that you have to modify for all of the combinations. Examples for configurations are available for example in the [mbed-os-example-client](https://github.com/ARMmbed/mbed-os-example-client/tree/master/configs) repository.

## Linking error with UBLOX_EVK_ODIN_W2

If you get a linking error such as below, you are compiling the `WIFI_ODIN` with the `EMAC override` section in `mbed_app.json`. Remove the `EMAC override` from your `mbed_app.json`. 

```
Link: tls-client
./mbed-os/targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/sdk/TOOLCHAIN_GCC_ARM/libublox-odin-w2-driver.a(OdinWiFiInterface.o): In function `OdinWiFiInterface::handle_wlan_status_started(wlan_status_started_s*)':
OdinWiFiInterface.cpp:(.text._ZN17OdinWiFiInterface26handle_wlan_status_startedEP21wlan_status_started_s+0x46): undefined reference to `wifi_emac_get_interface()'
OdinWiFiInterface.cpp:(.text._ZN17OdinWiFiInterface26handle_wlan_status_startedEP21wlan_status_started_s+0x4c): undefined reference to `wifi_emac_init_mem()'
collect2: error: ld returned 1 exit status
[ERROR] ./mbed-os/targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/sdk/TOOLCHAIN_GCC_ARM/libublox-odin-w2-driver.a(OdinWiFiInterface.o): In function `OdinWiFiInterface::handle_wlan_status_started(wlan_status_started_s*)':
OdinWiFiInterface.cpp:(.text._ZN17OdinWiFiInterface26handle_wlan_status_startedEP21wlan_status_started_s+0x46): undefined reference to `wifi_emac_get_interface()'
OdinWiFiInterface.cpp:(.text._ZN17OdinWiFiInterface26handle_wlan_status_startedEP21wlan_status_started_s+0x4c): undefined reference to `wifi_emac_init_mem()'
collect2: error: ld returned 1 exit status

[mbed] ERROR: "/usr/bin/python" returned error code 1.
```

## Network errors

If Easy Connect cannot connect to the network, it returns a network error with an error code. To see what the error code means, see the [mbed OS Communication API](https://os.mbed.com/docs/latest/reference/network-socket.html).

## CR/LF in serial output

If you want to avoid using `\r\n` in your printouts and just use normal C style `\n` instead, please specify these to your `mbed_app.json`:

```json
       "target_overrides": {
        "*": {
            "platform.stdio-baud-rate": 115200,
            "platform.stdio-convert-newlines": true
        }
    }
```

## For network stack developers

Please try out the reliability of your networking stack using
[stress-test](https://github.com/ARMmbed/mbed-stress-test) to ensure
your stack is performing as expected.

## Extra defines

If you'd like to use Easy Connect with mbed Client then you're in luck. Easy Connect automatically defines the `MBED_SERVER_ADDRESS` macro depending on your connectivity method (either IPv4 or IPv6 address). Use this address to connect to the right instance of mbed Device Connector.