Jim Flynn
wifi test
Dependencies: X_NUCLEO_IKS01A2 mbed-http
Diff: easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Commands.h
- Revision:
- 0:24d3eb812fd4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Commands.h Wed Sep 05 14:28:24 2018 +0000
@@ -0,0 +1,336 @@
+/**
+ ******************************************************************************
+ * @file SPIRIT_Commands.h
+ * @author VMA division - AMS
+ * @version 3.2.2
+ * @date 08-July-2015
+ * @brief Management of SPIRIT Commands.
+ *
+ * @details
+ *
+ * In this module can be found all the API used to strobe commands to
+ * Spirit.
+ * Every command strobe is an SPI transaction with a specific command code.
+ *
+ * <b>Example:</b>
+ * @code
+ * ...
+ *
+ * SpiritCmdStrobeRx();
+ *
+ * ...
+ * @endcode
+ *
+ *
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_COMMANDS_H
+#define __SPIRIT_COMMANDS_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_Commands Commands
+ * @brief Management of SPIRIT Commands.
+ * @details See the file <i>@ref SPIRIT_Commands.h</i> for more details.
+ * @{
+ */
+
+/**
+ * @defgroup Commands_Exported_Types Commands Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPIRIT Commands codes enumeration
+ */
+typedef enum
+{
+ CMD_TX = COMMAND_TX, /*!< Start to transmit; valid only from READY */
+ CMD_RX = COMMAND_RX, /*!< Start to receive; valid only from READY */
+ CMD_READY = COMMAND_READY, /*!< Go to READY; valid only from STANDBY or SLEEP or LOCK */
+ CMD_STANDBY = COMMAND_STANDBY, /*!< Go to STANDBY; valid only from READY */
+ CMD_SLEEP = COMMAND_SLEEP, /*!< Go to SLEEP; valid only from READY */
+ CMD_LOCKRX = COMMAND_LOCKRX, /*!< Go to LOCK state by using the RX configuration of the synth; valid only from READY */
+ CMD_LOCKTX = COMMAND_LOCKTX, /*!< Go to LOCK state by using the TX configuration of the synth; valid only from READY */
+ CMD_SABORT = COMMAND_SABORT, /*!< Force exit form TX or RX states and go to READY state; valid only from TX or RX */
+ CMD_LDC_RELOAD = COMMAND_LDC_RELOAD, /*!< LDC Mode: Reload the LDC timer with the value stored in the LDC_PRESCALER / COUNTER registers; valid from all states */
+ CMD_SEQUENCE_UPDATE = COMMAND_SEQUENCE_UPDATE, /*!< Autoretransmission: Reload the Packet sequence counter with the value stored in the PROTOCOL[2] register valid from all states */
+ CMD_AES_ENC = COMMAND_AES_ENC, /*!< Commands: Start the encryption routine; valid from all states; valid from all states */
+ CMD_AES_KEY = COMMAND_AES_KEY, /*!< Commands: Start the procedure to compute the key for the decryption; valid from all states */
+ CMD_AES_DEC = COMMAND_AES_DEC, /*!< Commands: Start the decryption routine using the current key; valid from all states */
+ CMD_AES_KEY_DEC = COMMAND_AES_KEY_DEC, /*!< Commands: Compute the key and start the decryption; valid from all states */
+ CMD_SRES = COMMAND_SRES, /*!< Reset of all digital part, except SPI registers */
+ CMD_FLUSHRXFIFO = COMMAND_FLUSHRXFIFO, /*!< Clean the RX FIFO; valid from all states */
+ CMD_FLUSHTXFIFO = COMMAND_FLUSHTXFIFO, /*!< Clean the TX FIFO; valid from all states */
+} SpiritCmd;
+
+#define IS_SPIRIT_CMD(CMD) (CMD == CMD_TX || \
+ CMD == CMD_RX || \
+ CMD == CMD_READY || \
+ CMD == CMD_STANDBY || \
+ CMD == CMD_SLEEP || \
+ CMD == CMD_LOCKRX || \
+ CMD == CMD_LOCKTX || \
+ CMD == CMD_SABORT || \
+ CMD == CMD_LDC_RELOAD || \
+ CMD == CMD_SEQUENCE_UPDATE || \
+ CMD == CMD_AES_ENC || \
+ CMD == CMD_AES_KEY || \
+ CMD == CMD_AES_DEC || \
+ CMD == CMD_AES_KEY_DEC || \
+ CMD == CMD_SRES || \
+ CMD == CMD_FLUSHRXFIFO || \
+ CMD == CMD_FLUSHTXFIFO \
+ )
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Commands_Exported_Constants Commands Exported Constants
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Commands_Exported_Macros Commands Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Sends the TX command to SPIRIT. Start to transmit.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeTx() {SpiritManagementWaCmdStrobeTx(); \
+ SpiritCmdStrobeCommand(CMD_TX);}
+
+
+/**
+ * @brief Sends the RX command to SPIRIT. Start to receive.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeRx() {SpiritManagementWaCmdStrobeRx(); \
+ SpiritCmdStrobeCommand(CMD_RX); \
+ }
+
+
+/**
+ * @brief Sends the Ready state command to SPIRIT. Go to READY.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeReady() SpiritCmdStrobeCommand(CMD_READY)
+
+
+
+/**
+ * @brief Sends the Standby command to SPIRIT. Go to STANDBY.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeStandby() SpiritCmdStrobeCommand(CMD_STANDBY)
+
+
+
+/**
+ * @brief Sends the Sleep command to SPIRIT. Go to SLEEP.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSleep() SpiritCmdStrobeCommand(CMD_SLEEP)
+
+
+
+/**
+ * @brief Sends the LOCK_RX command to SPIRIT. Go to the LOCK state by using the RX configuration of the synthesizer.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeLockRx() SpiritCmdStrobeCommand(CMD_LOCKRX)
+
+
+
+/**
+ * @brief Sends the LOCK_TX command to SPIRIT. Go to the LOCK state by using the TX configuration of the synthesizer.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeLockTx() SpiritCmdStrobeCommand(CMD_LOCKTX)
+
+
+
+/**
+ * @brief Sends the SABORT command to SPIRIT. Exit from TX or RX states and go to READY state.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSabort() SpiritCmdStrobeCommand(CMD_SABORT)
+
+
+/**
+ * @brief Sends the LDC_RELOAD command to SPIRIT. Reload the LDC timer with the value stored in the LDC_PRESCALER / COUNTER registers.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeLdcReload() SpiritCmdStrobeCommand(CMD_LDC_RELOAD)
+
+
+
+/**
+ * @brief Sends the SEQUENCE_UPDATE command to SPIRIT. Reload the Packet sequence counter with the value stored in the PROTOCOL[2] register.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSequenceUpdate() SpiritCmdStrobeCommand(CMD_SEQUENCE_UPDATE)
+
+
+
+/**
+ * @brief Sends the AES_ENC command to SPIRIT. Starts the encryption routine.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesEnc() SpiritCmdStrobeCommand(CMD_AES_ENC)
+
+
+
+/**
+ * @brief Sends the AES_KEY command to SPIRIT. Starts the procedure to compute the key for the decryption.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesKey() SpiritCmdStrobeCommand(CMD_AES_KEY)
+
+
+
+/**
+ * @brief Sends the AES_DEC command to SPIRIT. Starts the decryption using the current key.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesDec() SpiritCmdStrobeCommand(CMD_AES_DEC)
+
+
+
+/**
+ * @brief Sends the KEY_DEC command to SPIRIT. Computes the key derivation and start the decryption.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesKeyDec() SpiritCmdStrobeCommand(CMD_AES_KEY_DEC)
+
+/**
+ * @brief Sends the SRES command to SPIRIT. Partial reset: all digital circuit will be reset (exception for SPI only).
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSres() SpiritCmdStrobeCommand(CMD_SRES)
+
+
+/**
+ * @brief Sends the FLUSHRXFIFO command to SPIRIT. Clean the RX FIFO.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeFlushRxFifo() SpiritCmdStrobeCommand(CMD_FLUSHRXFIFO)
+
+
+
+/**
+ * @brief Sends the FLUSHTXFIFO command to SPIRIT. Clean the TX FIFO.
+ * @param None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeFlushTxFifo() SpiritCmdStrobeCommand(CMD_FLUSHTXFIFO)
+
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Commands_Exported_Functions Commands Exported Functions
+ * @{
+ */
+void SpiritCmdStrobeCommand(SpiritCmd xCommandCode);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/