Jim Flynn
Changes to enabled on-line compiler
Diff: platform/ezconnect/BG96-driver/BG96Interface.h
- Revision:
- 0:082731ede69f
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/platform/ezconnect/BG96-driver/BG96Interface.h Wed May 30 20:59:51 2018 +0000
@@ -0,0 +1,346 @@
+/**
+* copyright (c) 2018, James Flynn
+* SPDX-License-Identifier: Apache-2.0
+*/
+
+/*
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+/**
+* @file BG96Interface.h
+* @brief Implements NetworkInterface class for use with the Quectel BG96
+* data module running MBed OS v5.x
+*
+* @author James Flynn
+*
+* @date 1-April-2018
+*/
+
+#ifndef __BG96Interface_H__
+#define __BG96Interface_H__
+
+#include <stdint.h>
+
+#include "mbed.h"
+#include "Callback.h"
+
+#include "BG96.h"
+
+#define APN_DEFAULT "m2m.com.attz"
+#define BG96_MISC_TIMEOUT 15000
+#define BG96_SOCKET_COUNT 5
+
+#define DBGMSG_DRV 0x04
+#define DBGMSG_EQ 0x08
+#define DBGMSG_ARRY 0x20
+
+#define FIRMWARE_REV(x) (((BG96Interface*)x)->getRevision())
+
+typedef struct rx_event_t {
+ int m_rx_state; //state of the socket receive
+ int m_rx_socketID; //which socket is being rcvd on
+ uint8_t *m_rx_dptr; //pointer to the users data buffer
+ uint32_t m_rx_req_size; //Requested number of bytes to receive
+ uint32_t m_rx_asked_size;
+ uint32_t m_rx_total_cnt; //Total number of bytes received
+ int m_rx_timer; //Rx Timeout Timer
+ int m_rx_disTO; //Flag to disable Timeout Timer
+ void (*m_rx_callback)(void*);//callback used with attach
+ void *m_rx_cb_data; //callback data to be returned
+ uint32_t m_rx_return_cnt; //number of bytes the Event Queue is returning
+ } RXEVENT;
+
+typedef struct tx_event_t {
+ int m_tx_state;
+ int m_tx_socketID;
+ uint8_t *m_tx_dptr;
+ unsigned m_tx_orig_size;
+ uint32_t m_tx_req_size;
+ uint32_t m_tx_total_sent;
+ void (*m_tx_callback)(void*);
+ void *m_tx_cb_data;
+ } TXEVENT;
+
+
+/** BG96_socket class
+ * Implementation of BG96 socket structure
+ */
+typedef struct _socket_t {
+ int id; //nbr given by BG96 driver or -1 if not used
+ SocketAddress addr; //address this socket is attached to
+ bool disTO; //true of socket is listening for incomming data
+ nsapi_protocol_t proto; //TCP or UDP
+ bool connected; //true if socket is connected
+ void (*_callback)(void*); //callback used with attach
+ void *_data; //callback data to be returned
+ void *dptr_last; //pointer to the last data buffer used
+ unsigned dptr_size; //the size of the last user data buffer
+ } BG96SOCKET;
+
+
+class BG96Interface : public NetworkStack, public NetworkInterface
+{
+public:
+ BG96Interface();
+ virtual ~BG96Interface();
+
+ /** Connect to the network (no parameters)
+ *
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t connect(void);
+
+ /** Connect to the network
+ *
+ * @param apn Optional, APN of network
+ * @param user Optional, username --not used--
+ * @param pass Optional, password --not used--
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t connect(const char *apn, const char *username = 0, const char *password = 0);
+
+ /** Set the cellular network credentials
+ *
+ * @param apn Optional, APN of network
+ * @param user Optional, username --not used--
+ * @param pass Optional, password --not used--
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t set_credentials(const char *apn = 0,
+ const char *username = 0, const char *password = 0);
+
+ /** disconnect from the network
+ *
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t disconnect();
+
+ /** Get the IP address of WNC device. From NetworkStack Class
+ *
+ * @return IP address string or null
+ */
+ virtual const char *get_ip_address();
+
+ /** Get the MAC address of the WNC device.
+ *
+ * @return MAC address of the interface
+ */
+ virtual const char *get_mac_address();
+
+ /** Query Module SW revision
+ *
+ * @return SW Revision string
+ */
+ const char* getRevision(void);
+
+ /** Query registered state
+ *
+ * @return true if registerd, false if not
+ */
+ bool registered();
+
+ /** Set the level of Debug output
+ *
+ * @param bit field
+ * mbed driver info = 0x04
+ * dump buffers = 0x20
+ * AT command tracing = 0x80
+ */
+ void doDebug( int v );
+
+
+protected:
+
+ /** Get Host IP by name.
+ *
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t gethostbyname(const char* name, SocketAddress *address, nsapi_version_t version);
+
+
+ /** return a pointer to the NetworkStack object
+ *
+ * @return The underlying NetworkStack object
+ */
+ virtual NetworkStack *get_stack(void);
+
+ /** Open a socket.
+ *
+ * @param handle Handle in which to store new socket
+ * @param proto Type of socket to open, NSAPI_TCP or NSAPI_UDP
+ * @return nsapi_error_t
+ */
+ virtual int socket_open(void **handle, nsapi_protocol_t proto);
+
+
+ /* setsockopt allows applications to pass stack-specific hints
+ * to the underlying stack. For unsupported options,
+ * NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
+ *
+ * @param handle Socket handle
+ * @param level Stack-specific protocol level
+ * @param optname Stack-specific option identifier
+ * @param optval Option value
+ * @param optlen Length of the option value
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t setsockopt(nsapi_socket_t handle, int level, int optname, const void *optval, unsigned optlen);
+
+
+ /* getsockopt retrieves stack-specific options.
+ *
+ * unsupported options return NSAPI_ERROR_UNSUPPORTED
+ *
+ * @param level Stack-specific protocol level or nsapi_socket_level_t
+ * @param optname Level-specific option name
+ * @param optval Destination for option value
+ * @param optlen Length of the option value
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t getsockopt(nsapi_socket_t handle, int level, int optname, void *optval, unsigned *optlen);
+
+
+ /** Close the socket.
+ *
+ * @param handle Socket handle
+ * @return 0 on success, negative on failure
+ */
+ virtual int socket_close(void *handle);
+
+ /** Bind a server socket to a specific port.
+ *
+ * @brief Bind the socket to a specific port
+ * @param handle Socket handle
+ * @param address address to listen for
+ * @return 0;
+ */
+ virtual int socket_bind(void *handle, const SocketAddress &address);
+
+ /** Start listening for incoming connections.
+ *
+ * @brief NOT SUPPORTED
+ * @param handle Socket handle
+ * @param backlog Number of pending connections that can be queued up at any
+ * one time [Default: 1]
+ * @return nsapi_error_t
+ */
+ virtual nsapi_error_t socket_listen(void *handle, int backlog);
+
+ /** Accept a new connection.
+ *
+ * @brief NOT SUPPORTED
+ * @return NSAPI_ERROR_UNSUPPORTED;
+ */
+ virtual int socket_accept(nsapi_socket_t server,
+ nsapi_socket_t *handle, SocketAddress *address=0);
+
+ /** Connects this socket to the server.
+ *
+ * @param handle Socket handle
+ * @param address SocketAddress
+ * @return nsapi_error_t
+ */
+ virtual int socket_connect(void *handle, const SocketAddress &address);
+
+ /** Send data to the remote host.
+ *
+ * @param handle Socket handle
+ * @param data buffer to send
+ * @param size length of buffer
+ * @return Number of bytes written or negative on failure
+ *
+ * @note This call is non-blocking.
+ */
+ virtual int socket_send(void *handle, const void *data, unsigned size);
+
+ /** Receive data from the remote host.
+ *
+ * @param handle Socket handle
+ * @param data buffer to store the recived data
+ * @param size bytes to receive
+ * @return received bytes received, negative on failure
+ *
+ * @note This call is non-blocking.
+ */
+ virtual int socket_recv(void *handle, void *data, unsigned size);
+
+ /** Send a packet to a remote endpoint.
+ *
+ * @param handle Socket handle
+ * @param address SocketAddress
+ * @param data data to send
+ * @param size number of bytes to send
+ * @return the number of bytes sent or negative on failure
+ *
+ * @note This call is non-blocking
+ */
+ virtual int socket_sendto(void *handle, const SocketAddress &address, const void *data, unsigned size);
+
+ /** Receive packet remote endpoint
+ *
+ * @param handle Socket handle
+ * @param address SocketAddress
+ * @param buffer buffer to store data to
+ * @param size number of bytes to receive
+ * @return the number bytes received or negative on failure
+ *
+ * @note This call is non-blocking
+ */
+ virtual int socket_recvfrom(void *handle, SocketAddress *address, void *buffer, unsigned size);
+
+ /** Register a callback on state change of the socket
+ *
+ * @param handle Socket handle
+ * @param callback Function to call on state change
+ * @param data Argument to pass to callback
+ *
+ * @note Callback may be called in an interrupt context.
+ */
+ virtual void socket_attach(void *handle, void (*callback)(void *), void *data);
+
+private:
+
+ int tx_event(TXEVENT *ptr); //called to TX data
+ int rx_event(RXEVENT *ptr); //called to RX data
+ void g_eq_event(void); //event queue to tx/rx
+ void _eq_schedule(void);
+
+ nsapi_error_t g_isInitialized; //TRUE if the BG96Interface is connected to the network
+ int g_bg96_queue_id; //the ID of the EventQueue used by the driver
+ uint32_t scheduled_events;
+
+ BG96SOCKET g_sock[BG96_SOCKET_COUNT]; //
+ TXEVENT g_socTx[BG96_SOCKET_COUNT]; //
+ RXEVENT g_socRx[BG96_SOCKET_COUNT]; //
+
+ Thread _bg96_monitor; //event queue thread
+ EventQueue _bg96_queue;
+
+ Mutex gvupdate_mutex; //protect global variable updates
+ Mutex txrx_mutex; //protect RX/TX event queue activities
+ BG96 _BG96; //create the BG96 HW interface object
+
+ #if MBED_CONF_APP_BG96_DEBUG == true
+ Mutex dbgout_mutex;
+ int g_debug; //flag for debug settings
+ void _dbDump_arry( const uint8_t* data, unsigned int size );
+ void _dbOut(int, const char *format, ...);
+ #endif
+
+};
+
+#endif /* __BG96Interface_H__ */
+