Diff: main.cpp

Revision:

0:9278fbadebb5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Feb 02 22:36:55 2016 +0000
@@ -0,0 +1,65 @@
+/*
+  Hotboards_SpiLcd Library - setCursor
+ Demonstrates the use a 16x2 LCD display.  The Hotboards_SpiLcd
+ library works with all LCD displays that are compatible with the
+ ST7032 driver presented on Spi Lcd board (http://www.hotboards.org).
+ This sketch prints to all the positions of the LCD using the
+ setCursor() method:
+  
+  The circuit:
+  *  BKL   -->  GND
+  *  VDD   -->  3.3v
+  *  GND   -->  GND
+  *  SCK   -->  PA_5
+  *  SI    -->  PA_6
+  *  CS    -->  PB_15
+  *  RS    -->  PB_14
+  *  RST   -->  PB_13
+
+ Library and example ported by Diego from Hotboards and originally created 
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe
+ modified 22 Nov 2010
+ by Tom Igoe
+ */
+ 
+#include "mbed.h"
+#include "Hotboards_SpiLcd.h"
+
+/* initialize an instance of SPI bus,setting the SPI pins*/
+SPI device(PA_7,PA_6,PA_5); /* SO, SI, SCK*/
+/* initialize the library with the numbers of the interface pins*/
+Hotboards_SpiLcd display( device, PB_15, PB_14, PB_13 ); /* SPI, CS, RS, RST */
+
+
+int main() 
+{
+    /* set the spi frequency to 5MHz*/
+    device.frequency(5000000);
+    /* initialize internal lcd controller:*/
+    display.init();
+    
+    while(1) 
+    {
+      // loop from ASCII 'a' to ASCII 'z':
+      for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) 
+      {
+        // loop over the columns:
+        for (int  thisRow = 0; thisRow < 2; thisRow++) 
+        {
+         // loop over the rows:
+         for (int thisCol = 0; thisCol < 16; thisCol++) 
+         {
+          // set the cursor position:
+          display.setCursor(thisCol, thisRow);
+          // print the letter:
+          display.printf("%c",thisLetter);
+          wait(0.2);
+         }
+        }
+      }
+    }
+}