Hotboards MX
Demonstrates de setCursor funcion of Hotboards_SpiLcd Library
Dependencies: Hotboards_SpiLcd mbed
Revision 0:90058d9b164b, committed 2016-02-01
- Comitter:
- Hotboards
- Date:
- Mon Feb 01 04:42:26 2016 +0000
- Commit message:
- This sketch prints "Row 1" in the upper row of the LCD; & prints "Row 2" in the lower row of the LCD,; Demonstrating the function setCursor.
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Hotboards_SpiLcd.lib Mon Feb 01 04:42:26 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Hotboards/code/Hotboards_SpiLcd/#1d03652e9f7a
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Mon Feb 01 04:42:26 2016 +0000
@@ -0,0 +1,56 @@
+/*
+ Hotboards_SpiLcd Library - Writing in diferent rows
+
+ Demonstrates the use a 16x2 LCD display, specially the function setCursor.
+ The Hotboards_SpiLcd library works with all LCD displays that are compatible with the
+ ST7032 driver presented on Spi Lcd board (http://www.hotboards.org).
+
+ This sketch prints "Row 1" in the upper row of the LCD
+ & prints "Row 2" in the lower row of the LCD
+
+ The circuit:
+ * BKL --> GND
+ * VDD --> 3.3v
+ * GND --> GND
+ * SCK --> PA_5
+ * SI --> PA_6
+ * CS --> PB_15
+ * RS --> PB_14
+ * RST --> PB_13
+
+ Library ported by Diego from Hotboards and originally created by
+ David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added
+ by Pedro from Hotboards
+ This example code is in the public domain.
+ */
+#include "mbed.h"
+#include "Hotboards_SpiLcd.h"
+
+/* initialize an instance of SPI bus,setting the SPI pins*/
+SPI device(PA_7,PA_6,PA_5); /* SO, SI, SCK*/
+/* initialize the library with the numbers of the interface pins*/
+Hotboards_SpiLcd display( device, PB_15, PB_14, PB_13 ); /* SPI, CS, RS, RST */
+
+int main()
+{
+ /* set the spi frequency to 5MHz*/
+ device.frequency(5000000);
+ /* initialize internal lcd controller:*/
+ display.init();
+ /* Set Cursor on column 2 and Row 0*/
+ display.setCursor(2,0);
+ /* Print a message */
+ display.printf( "Row 1" );
+ /* Set Cursor on column 4 and Row 1*/
+ display.setCursor(4,1);
+ /* Print another message */
+ display.printf( "Row 2" );
+
+ while(1)
+ {
+ /* infinite loop, doing nothing*/
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Mon Feb 01 04:42:26 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/6f327212ef96 \ No newline at end of file