Revision 0:a910ddaef7c0, committed 2016-01-28

Comitter:

Hotboards

Date:

Thu Jan 28 23:01:37 2016 +0000

Child:

1:25bddedff209

Commit message:

first mbed example

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Hotboards_SpiLcd.lib	Thu Jan 28 23:01:37 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/Hotboards/code/Hotboards_SpiLcd/#1d03652e9f7a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Jan 28 23:01:37 2016 +0000
@@ -0,0 +1,59 @@
+/*
+  Hotboards_SpiLcd Library - Hello World
+  
+  Demonstrates the use a 16x2 LCD display.  The Hotboards_SpiLcd
+  library works with all LCD displays that are compatible with the
+  SP7032 driver presented on Spi Lcd board (http://www.hotboards.org).
+  This sketch prints "Hello World!" to the LCD
+  and shows the time.
+  
+  The circuit:
+  *  BKL   -->  GND
+  *  VDD   -->  3.3v
+  *  GND   -->  GND
+  *  SCLK  -->  CLK (ICSP conector)
+  *  SI    -->  MOSI (ICSPs conector)
+  *  CS    -->  D7
+  *  RS    -->  D6
+  *  RST   -->  D5
+ 
+  Library and example ported by Diego from Hotboards and originally cretaed by
+  by David A. Mellis
+  library modified 5 Jul 2009
+  by Limor Fried (http://www.ladyada.net)
+  example added 9 Jul 2009
+  by Tom Igoe
+  modified 22 Nov 2010
+  by Tom Igoe
+  This example code is in the public domain.
+ */
+ 
+#include "mbed.h"
+#include "Hotboards_SpiLcd.h"
+ 
+// initialize the spi peripherals, setting the spi pins 
+SPI device( PB_5, NC, PB_3 ); // mosi, miso, sclk
+// initialize the library with the numbers of the interface pins
+Hotboards_SpiLcd display( device, PC_0, PC_1, PC_2 ); //spi, cs, rs, rst
+ 
+int main( void ) 
+{
+    uint8_t milis = 0;
+    // set the spi frequency to 5MHz
+    device.frequency(5000000);
+    // initialize internal lcd controller:
+    display.init();
+    // Print a message to the LCD.
+    display.printf( "Hello mbed!" );
+    
+    while(1)
+    {
+        // set the cursor to column 0, line 1
+        // (note: line 1 is the second row, since counting begins with 0):
+        display.setCursor( 0, 1 );
+        wait( 1 );
+        milis++;
+        // print the number of seconds since reset:
+        display.printf( "  %d", milis );
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Thu Jan 28 23:01:37 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/6f327212ef96
\ No newline at end of file