Diff: readme.md

Revision:

80:5e52c5847273

Parent:

79:9f3aca04de4e

Child:

81:dded8c042cca

--- a/readme.md	Thu Jan 31 12:55:00 2019 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,64 +0,0 @@
-# BLE Heart Rate Monitor
-
-This application transmits a heart rate value using the [Bluetooth SIG Heart Rate Profile](https://developer.bluetooth.org/TechnologyOverview/Pages/HRP.aspx). The heart rate value is provided by the application itself, not by a sensor, so that you don't have to get a sensor just to run the example.
-
-Technical details are better presented [in the mbed Classic equivalent of this example](https://developer.mbed.org/teams/Bluetooth-Low-Energy/code/BLE_HeartRate/).
-
-# Running the application
-
-## Requirements
-
-To see the heart rate information on your phone, use a BLE scanner:
-
-- [nRF Master Control Panel](https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp) for Android.
-
-- [LightBlue](https://itunes.apple.com/gb/app/lightblue-bluetooth-low-energy/id557428110?mt=8) for iPhone.
-
-Hardware requirements are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md).
-
-## Building instructions
-
-Building instructions for all samples are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md).
-
-## Checking for success
-
-**Note:** Screens captures depicted below show what is expected from this example if the scanner used is *nRF Master Control Panel* version 4.0.5. If you encounter any difficulties consider trying another scanner or another version of nRF Master Control Panel. Alternative scanners may require reference to their manuals.
-
-1. Build the application and install it on your board as explained in the building instructions.
-1. Open the BLE scanner on your phone.
-1. Start a scan.
-
-    ![](img/start_scan.png)
-
-    **figure 1** How to start scan using nRF Master Control Panel 4.0.5
-
-1. Find your device; it should be named `HRM`.
-
-    ![](img/scan_result.png)
-
-    **figure 2** Scan results using nRF Master Control Panel 4.0.5
-
-1. Establish a connection with your device.
-
-    ![](img/connection.png)
-
-    **figure 3**  How to establish a connection using Master Control Panel 4.0.5
-
-1. Discover the services and the characteristics on the device. The *Heart Rate* service has the UUID `0x180D` and includes the *Heart Rate Measurement* characteristic which has the UUID `0x2A37`.
-
-    ![](img/discovery.png)
-
-    **figure 4** Representation of the Heart Rate service using Master Control Panel 4.0.5
-
-1. Register for the notifications sent by the *Heart Rate Measurement* characteristic.
-
-    ![](img/register_to_notifications.png)
-
-    **figure 5** How to register to notifications using Master Control Panel 4.0.5
-
-
-1. You should see the heart rate value change every half second. It begins at 100, goes up to 175 (in steps of 1), resets to 100 and so on.
-
-    ![](img/notifications.png)
-
-    **figure 6** Notifications view using Master Control Panel 4.0.5