Mustapha hamdi
INSAT Mini Project
Dependencies: ST_INTERFACES X_NUCLEO_COMMON
Fork of
X_NUCLEO_6180XA1
by 
ST
Revision 1:1de1ea2994d9, committed 2015-09-09
- Comitter:
- gallonm
- Date:
- Wed Sep 09 16:00:39 2015 +0000
- Parent:
- 0:1fb1f010ac84
- Child:
- 2:7684e0b4e40e
- Commit message:
- Added some files
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/Interfaces/GenericSensor.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,67 @@
+/**
+ ******************************************************************************
+ * @file GenericSensor.h
+ * @author AST / EST
+ * @version V0.0.1
+ * @date 13-April-2015
+ * @brief This file contains the abstract class describing in general
+ * the interfaces of a generic sensor
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent from recursive inclusion --------------------------------*/
+#ifndef __GENERIC_SENSOR_CLASS_H
+#define __GENERIC_SENSOR_CLASS_H
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdint.h>
+
+/* Classes ------------------------------------------------------------------*/
+/** An abstract class for Generic sensors
+ */
+class GenericSensor
+{
+ public:
+ /**
+ * @brief Initialization of sensor
+ * @param[out] ptr Pointer to device specific initalization structure
+ * @return 0 in case of success, an error code otherwise
+ */
+ virtual int Init(void *ptr) = 0;
+
+ /**
+ * @brief Get ID of sensor
+ * @param[out] id Pointer to where to store the ID to
+ * @return 0 in case of success, an error code otherwise
+ */
+ virtual int ReadID(uint8_t *id) = 0;
+};
+
+#endif /* __GENERIC_SENSOR_CLASS_H */
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/Interfaces/LightSensor.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file LightSensor.h
+ * @author AST / EST
+ * @version V0.0.1
+ * @date 13-April-2015
+ * @brief This file contains the abstract class describing in general
+ * the interfaces of an ambient light sensor (ALS)
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent from recursive inclusion --------------------------------*/
+#ifndef __LIGHT_SENSOR_CLASS_H
+#define __LIGHT_SENSOR_CLASS_H
+
+/* Includes ------------------------------------------------------------------*/
+#include <GenericSensor.h>
+
+/* Classes ------------------------------------------------------------------*/
+/** An abstract class for Humidity sensors
+ */
+class LightSensor : public GenericSensor
+{
+ public:
+ /**
+ * @brief Get current light [lux]
+ * @param[out] pfData Pointer to where to store light to
+ * @return 0 in case of success, an error code otherwise
+ */
+ virtual int GetLight(int *piData) = 0;
+};
+
+#endif /* __LIGHT_SENSOR_CLASS_H */
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/Interfaces/RangeSensor.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file HumiditySensor.h
+ * @author AST / EST
+ * @version V0.0.1
+ * @date 13-April-2015
+ * @brief This file contains the abstract class describing in general
+ * the interfaces of an ambient light sensor (ALS)
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent from recursive inclusion --------------------------------*/
+#ifndef __LIGHT_SENSOR_CLASS_H
+#define __LIGHT_SENSOR_CLASS_H
+
+/* Includes ------------------------------------------------------------------*/
+#include <GenericSensor.h>
+
+/* Classes ------------------------------------------------------------------*/
+/** An abstract class for Humidity sensors
+ */
+class LightSensor : public GenericSensor
+{
+ public:
+ /**
+ * @brief Get current light [lux]
+ * @param[out] pfData Pointer to where to store light to
+ * @return 0 in case of success, an error code otherwise
+ */
+ virtual int GetLight(int *piData) = 0;
+};
+
+#endif /* __LIGHT_SENSOR_CLASS_H */
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_api.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,982 @@
+/*******************************************************************************
+Copyright © 2014, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+/*
+ * @file VL6180x_api.h
+ * $Date: 2015-03-24 14:15:14 +0100 (Tue, 24 Mar 2015) $
+ * $Revision: 2213 $
+ */
+
+
+
+#ifndef VL6180x_API_H_
+#define VL6180x_API_H_
+
+#include "vl6180x_def.h"
+#include "vl6180x_platform.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup api_ll API Low Level Functions
+ * @brief API Low level functions
+ */
+
+/** @defgroup api_hl API High Level Functions
+ * @brief API High level functions
+ */
+
+
+/*
+ * Check and set default platform dependent configuration
+ */
+#ifndef VL6180x_SINGLE_DEVICE_DRIVER
+#error "VL6180x_SINGLE_DEVICE_DRIVER not defined"
+/* TODO you may remove or comment these #error but it is best you update your vl6180x_platform.h file to define it*/
+#endif
+
+
+#ifndef VL6180x_RANGE_STATUS_ERRSTRING
+#warning "VL6180x_RANGE_STATUS_ERRSTRING not defined ?"
+/* TODO you may remove or comment these #warning and keep the default below to keep compatibility
+ or update your vl6180x_platform.h file */
+/**
+ * force VL6180x_RANGE_STATUS_ERRSTRING to not supported when not part of any cfg file
+ */
+#define VL6180x_RANGE_STATUS_ERRSTRING 0
+#endif
+
+#ifndef VL6180X_SAFE_POLLING_ENTER
+#warning "VL6180X_SAFE_POLLING_ENTER not defined, likely old vl6180x_cfg.h file ?"
+/* TODO you may remove or comment these #warning and keep the default below to keep compatibility
+ or update your vl6180x_platform.h file */
+/**
+ * force VL6180X_SAFE_POLLING_ENTER to off when not in cfg file
+ */
+#define VL6180X_SAFE_POLLING_ENTER 0 /* off by default as in api 2.0 */
+#endif
+
+#ifndef VL6180X_LOG_ENABLE
+/**
+ * Force VL6180X_LOG_ENABLE to none as default
+ */
+#define VL6180X_LOG_ENABLE 0
+#endif
+
+#if VL6180x_RANGE_STATUS_ERRSTRING
+/**@def VL6180x_HAVE_RANGE_STATUS_ERRSTRING
+ * @brief is defined when @a #VL6180x_RANGE_STATUS_ERRSTRING is enable
+ */
+#define VL6180x_HAVE_RANGE_STATUS_ERRSTRING
+#endif
+
+
+/** @brief Get API version as "hex integer" 0xMMnnss
+ */
+#define VL6180x_ApiRevInt ((VL6180x_API_REV_MAJOR<<24)+(VL6180x_API_REV_MINOR<<16)+VL6180x_API_REV_SUB)
+
+/** Get API version as string for exe "2.1.12" "
+ */
+#define VL6180x_ApiRevStr VL6180X_STR(VL6180x_API_REV_MAJOR) "." VL6180X_STR(VL6180x_API_REV_MINOR) "." VL6180X_STR(VL6180x_API_REV_SUB)
+
+/** @defgroup api_init Init functions
+ * @brief API init functions
+ * @ingroup api_hl
+ * @{
+ */
+/**
+ * @brief Wait for device booted after chip enable (hardware standby)
+ * @par Function Description
+ * After Chip enable Application you can also simply wait at least 1ms to ensure device is ready
+ * @warning After device chip enable (gpio0) de-asserted user must wait gpio1 to get asserted (hardware standby).
+ * or wait at least 400usec prior to do any low level access or api call .
+ *
+ * This function implements polling for standby but you must ensure 400usec from chip enable passed\n
+ * @warning if device get prepared @a VL6180x_Prepare() re-using these function can hold indefinitely\n
+ *
+ * @param dev The device
+ * @return 0 on success
+ */
+int VL6180x_WaitDeviceBooted(VL6180xDev_t dev);
+
+/**
+ *
+ * @brief One time device initialization
+ *
+ * To be called once and only once after device is brought out of reset (Chip enable) and booted see @a VL6180x_WaitDeviceBooted()
+ *
+ * @par Function Description
+ * When not used after a fresh device "power up" or reset, it may return @a #CALIBRATION_WARNING
+ * meaning wrong calibration data may have been fetched from device that can result in ranging offset error\n
+ * If application cannot execute device reset or need to run VL6180x_InitData multiple time
+ * then it must ensure proper offset calibration saving and restore on its own
+ * by using @a VL6180x_GetOffsetCalibrationData() on first power up and then @a VL6180x_SetOffsetCalibrationData() all all subsequent init
+ *
+ * @param dev The device
+ * @return 0 on success, @a #CALIBRATION_WARNING if failed
+ */
+int VL6180x_InitData(VL6180xDev_t dev );
+
+/**
+ * @brief Configure GPIO1 function and set polarity.
+ * @par Function Description
+ * To be used prior to arm single shot measure or start continuous mode.
+ *
+ * The function uses @a VL6180x_SetupGPIOx() for setting gpio 1.
+ * @warning changing polarity can generate a spurious interrupt on pins.
+ * It sets an interrupt flags condition that must be cleared to avoid polling hangs. \n
+ * It is safe to run VL6180x_ClearAllInterrupt() just after.
+ *
+ * @param dev The device
+ * @param IntFunction The interrupt functionality to use one of :\n
+ * @a #GPIOx_SELECT_OFF \n
+ * @a #GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT
+ * @param ActiveHigh The interrupt line polarity see ::IntrPol_e
+ * use @a #INTR_POL_LOW (falling edge) or @a #INTR_POL_HIGH (rising edge)
+ * @return 0 on success
+ */
+int VL6180x_SetupGPIO1(VL6180xDev_t dev, uint8_t IntFunction, int ActiveHigh);
+
+ /**
+ * @brief Prepare device for operation
+ * @par Function Description
+ * Does static initialization and reprogram common default settings \n
+ * Device is prepared for new measure, ready single shot ranging or ALS typical polling operation\n
+ * After prepare user can : \n
+ * @li Call other API function to set other settings\n
+ * @li Configure the interrupt pins, etc... \n
+ * @li Then start ranging or ALS operations in single shot or continuous mode
+ *
+ * @param dev The device
+ * @return 0 on success
+ */
+ int VL6180x_Prepare(VL6180xDev_t dev);
+
+ /** @} */
+
+
+/** @defgroup api_hl_range Ranging functions
+ * @brief Ranging functions
+ * @ingroup api_hl
+ * @{
+ */
+
+ /**
+ * @brief Start continuous ranging mode
+ *
+ * @details End user should ensure device is in idle state and not already running
+ */
+int VL6180x_RangeStartContinuousMode(VL6180xDev_t dev);
+
+/**
+ * @brief Start single shot ranging measure
+ *
+ * @details End user should ensure device is in idle state and not already running
+ */
+int VL6180x_RangeStartSingleShot(VL6180xDev_t dev);
+
+/**
+ * @brief Set maximum convergence time
+ *
+ * @par Function Description
+ * Setting a low convergence time can impact maximal detectable distance.
+ * Refer to VL6180x Datasheet Table 7 : Typical range convergence time.
+ * A typical value for up to x3 scaling is 50 ms
+ *
+ * @param dev
+ * @param MaxConTime_msec
+ * @return 0 on success. <0 on error. >0 for calibration warning status
+ */
+int VL6180x_RangeSetMaxConvergenceTime(VL6180xDev_t dev, uint8_t MaxConTime_msec);
+
+/**
+ * @brief Single shot Range measurement in polling mode.
+ *
+ * @par Function Description
+ * Kick off a new single shot range then wait for ready to retrieve it by polling interrupt status \n
+ * Ranging must be prepared by a first call to @a VL6180x_Prepare() and it is safer to clear very first poll call \n
+ * This function reference VL6180x_PollDelay(dev) porting macro/call on each polling loop,
+ * but PollDelay(dev) may never be called if measure in ready on first poll loop \n
+ * Should not be use in continuous mode operation as it will stop it and cause stop/start misbehaviour \n
+ * \n This function clears Range Interrupt status , but not error one. For that uses @a VL6180x_ClearErrorInterrupt() \n
+ * This range error is not related VL6180x_RangeData_t::errorStatus that refer measure status \n
+ *
+ * @param dev The device
+ * @param pRangeData Will be populated with the result ranging data @a VL6180x_RangeData_t
+ * @return 0 on success , @a #RANGE_ERROR if device reports an error case in it status (not cleared) use
+ *
+ * \sa ::VL6180x_RangeData_t
+ */
+int VL6180x_RangePollMeasurement(VL6180xDev_t dev, VL6180x_RangeData_t *pRangeData);
+
+/**
+ * @brief Check for measure readiness and get it if ready
+ *
+ * @par Function Description
+ * Using this function is an alternative to @a VL6180x_RangePollMeasurement() to avoid polling operation. This is suitable for applications
+ * where host CPU is triggered on a interrupt (not from VL6180X) to perform ranging operation. In this scenario, we assume that the very first ranging
+ * operation is triggered by a call to @a VL6180x_RangeStartSingleShot(). Then, host CPU regularly calls @a VL6180x_RangeGetMeasurementIfReady() to
+ * get a distance measure if ready. In case the distance is not ready, host may get it at the next call.\n
+ *
+ * @warning
+ * This function does not re-start a new measurement : this is up to the host CPU to do it.\n
+ * This function clears Range Interrupt for measure ready , but not error interrupts. For that, uses @a VL6180x_ClearErrorInterrupt() \n
+ *
+ * @param dev The device
+ * @param pRangeData Will be populated with the result ranging data if available
+ * @return 0 when measure is ready pRange data is updated (untouched when not ready), >0 for warning and @a #NOT_READY if measurement not yet ready, <0 for error @a #RANGE_ERROR if device report an error,
+ */
+int VL6180x_RangeGetMeasurementIfReady(VL6180xDev_t dev, VL6180x_RangeData_t *pRangeData);
+
+/**
+ * @brief Retrieve range measurements set from device
+ *
+ * @par Function Description
+ * The measurement is made of range_mm status and error code @a VL6180x_RangeData_t \n
+ * Based on configuration selected extra measures are included.
+ *
+ * @warning should not be used in continuous if wrap around filter is active \n
+ * Does not perform any wait nor check for result availability or validity.
+ *\sa VL6180x_RangeGetResult for "range only" measurement
+ *
+ * @param dev The device
+ * @param pRangeData Pointer to the data structure to fill up
+ * @return 0 on success
+ */
+int VL6180x_RangeGetMeasurement(VL6180xDev_t dev, VL6180x_RangeData_t *pRangeData);
+
+/**
+ * @brief Get ranging result and only that
+ *
+ * @par Function Description
+ * Unlike @a VL6180x_RangeGetMeasurement() this function only retrieves the range in millimeter \n
+ * It does any required up-scale translation\n
+ * It can be called after success status polling or in interrupt mode \n
+ * @warning these function is not doing wrap around filtering \n
+ * This function doesn't perform any data ready check!
+ *
+ * @param dev The device
+ * @param pRange_mm Pointer to range distance
+ * @return 0 on success
+ */
+int VL6180x_RangeGetResult(VL6180xDev_t dev, int32_t *pRange_mm);
+
+/**
+ * @brief Configure ranging interrupt reported to application
+ *
+ * @param dev The device
+ * @param ConfigGpioInt Select ranging report\n select one (and only one) of:\n
+ * @a #CONFIG_GPIO_INTERRUPT_DISABLED \n
+ * @a #CONFIG_GPIO_INTERRUPT_LEVEL_LOW \n
+ * @a #CONFIG_GPIO_INTERRUPT_LEVEL_HIGH \n
+ * @a #CONFIG_GPIO_INTERRUPT_OUT_OF_WINDOW \n
+ * @a #CONFIG_GPIO_INTERRUPT_NEW_SAMPLE_READY
+ * @return 0 on success
+ */
+int VL6180x_RangeConfigInterrupt(VL6180xDev_t dev, uint8_t ConfigGpioInt);
+
+
+/**
+ * @brief Clear range interrupt
+ *
+ * @param dev The device
+ * @return 0 On success
+ */
+#define VL6180x_RangeClearInterrupt(dev) VL6180x_ClearInterrupt(dev, INTERRUPT_CLEAR_RANGING)
+
+/**
+ * @brief Return ranging error interrupt status
+ *
+ * @par Function Description
+ * Appropriate Interrupt report must have been selected first by @a VL6180x_RangeConfigInterrupt() or @a VL6180x_Prepare() \n
+ *
+ * Can be used in polling loop to wait for a given ranging event or in interrupt to read the trigger \n
+ * Events triggers are : \n
+ * @a #RES_INT_STAT_GPIO_LOW_LEVEL_THRESHOLD \n
+ * @a #RES_INT_STAT_GPIO_HIGH_LEVEL_THRESHOLD \n
+ * @a #RES_INT_STAT_GPIO_OUT_OF_WINDOW \n (RES_INT_STAT_GPIO_LOW_LEVEL_THRESHOLD|RES_INT_STAT_GPIO_HIGH_LEVEL_THRESHOLD)
+ * @a #RES_INT_STAT_GPIO_NEW_SAMPLE_READY \n
+ *
+ * @sa IntrStatus_t
+ * @param dev The device
+ * @param pIntStatus Pointer to status variable to update
+ * @return 0 on success
+ */
+int VL6180x_RangeGetInterruptStatus(VL6180xDev_t dev, uint8_t *pIntStatus);
+
+#if VL6180x_RANGE_STATUS_ERRSTRING
+
+extern const char * ROMABLE_DATA VL6180x_RangeStatusErrString[];
+/**
+ * @brief Human readable error string for range error status
+ *
+ * @param RangeErrCode The error code as stored on @a VL6180x_RangeData_t::errorStatus
+ * @return error string , NULL for invalid RangeErrCode
+ * @sa ::RangeError_u
+ */
+const char * VL6180x_RangeGetStatusErrString(uint8_t RangeErrCode);
+#else
+#define VL6180x_RangeGetStatusErrString(...) NULL
+#endif
+
+/** @} */
+
+#if VL6180x_ALS_SUPPORT
+
+/** @defgroup api_hl_als ALS functions
+ * @brief ALS functions
+ * @ingroup api_hl
+ * @{
+ */
+
+/**
+ * @brief Run a single ALS measurement in single shot polling mode
+ *
+ * @par Function Description
+ * Kick off a new single shot ALS then wait new measurement ready to retrieve it ( polling system interrupt status register for als) \n
+ * ALS must be prepared by a first call to @a VL6180x_Prepare() \n
+ * \n Should not be used in continuous or interrupt mode it will break it and create hazard in start/stop \n
+ *
+ * @param dev The device
+ * @param pAlsData Als data structure to fill up @a VL6180x_AlsData_t
+ * @return 0 on success
+ */
+int VL6180x_AlsPollMeasurement(VL6180xDev_t dev, VL6180x_AlsData_t *pAlsData);
+
+
+/**
+ * @brief Get actual ALS measurement
+ *
+ * @par Function Description
+ * Can be called after success status polling or in interrupt mode to retrieve ALS measurement from device \n
+ * This function doesn't perform any data ready check !
+ *
+ * @param dev The device
+ * @param pAlsData Pointer to measurement struct @a VL6180x_AlsData_t
+ * @return 0 on success
+ */
+int VL6180x_AlsGetMeasurement(VL6180xDev_t dev, VL6180x_AlsData_t *pAlsData);
+
+/**
+ * @brief Configure ALS interrupts provide to application
+ *
+ * @param dev The Device
+ * @param ConfigGpioInt Select one (and only one) of : \n
+ * @a #CONFIG_GPIO_INTERRUPT_DISABLED \n
+ * @a #CONFIG_GPIO_INTERRUPT_LEVEL_LOW \n
+ * @a #CONFIG_GPIO_INTERRUPT_LEVEL_HIGH \n
+ * @a #CONFIG_GPIO_INTERRUPT_OUT_OF_WINDOW \n
+ * @a #CONFIG_GPIO_INTERRUPT_NEW_SAMPLE_READY
+ * @return 0 on success may return #INVALID_PARAMS for invalid mode
+ */
+int VL6180x_AlsConfigInterrupt(VL6180xDev_t dev, uint8_t ConfigGpioInt);
+
+
+/**
+ * @brief Set ALS integration period
+ *
+ * @param dev The device
+ * @param period_ms Integration period in msec. Value in between 50 to 100 msec is recommended\n
+ * @return 0 on success
+ */
+int VL6180x_AlsSetIntegrationPeriod(VL6180xDev_t dev, uint16_t period_ms);
+
+/**
+ * @brief Set ALS "inter-measurement period"
+ *
+ * @par Function Description
+ * The so call data-sheet "inter measurement period" is actually an extra inter-measurement delay
+ *
+ * @param dev The device
+ * @param intermeasurement_period_ms Inter measurement time in milli second\n
+ * @warning applied value is clipped to 2550 ms\n
+ * @return 0 on success if value is
+ */
+int VL6180x_AlsSetInterMeasurementPeriod(VL6180xDev_t dev, uint16_t intermeasurement_period_ms);
+
+/**
+ * @brief Set ALS analog gain code
+ *
+ * @par Function Description
+ * ALS gain code value programmed in @a SYSALS_ANALOGUE_GAIN .
+ * @param dev The device
+ * @param gain Gain code see datasheet or AlsGainLookUp for real value. Value is clipped to 7.
+ * @return 0 on success
+ */
+
+int VL6180x_AlsSetAnalogueGain(VL6180xDev_t dev, uint8_t gain);
+/**
+ * @brief Set thresholds for ALS continuous mode
+ * @warning Threshold are raw device value not lux!
+ *
+ * @par Function Description
+ * Basically value programmed in @a SYSALS_THRESH_LOW and @a SYSALS_THRESH_HIGH registers
+ * @param dev The device
+ * @param low ALS low raw threshold for @a SYSALS_THRESH_LOW
+ * @param high ALS high raw threshold for @a SYSALS_THRESH_HIGH
+ * @return 0 on success
+ */
+int VL6180x_AlsSetThresholds(VL6180xDev_t dev, uint8_t low, uint8_t high);
+
+/**
+ * @brief Clear ALS interrupt
+ *
+ * @param dev The device
+ * @return 0 On success
+ */
+ #define VL6180x_AlsClearInterrupt(dev) VL6180x_ClearInterrupt(dev, INTERRUPT_CLEAR_ALS)
+
+/**
+ * Read ALS interrupt status
+ * @param dev Device
+ * @param pIntStatus Pointer to status
+ * @return 0 on success
+ */
+int VL6180x_AlsGetInterruptStatus(VL6180xDev_t dev, uint8_t *pIntStatus);
+
+/** @} */
+#endif
+
+/** @defgroup api_ll_init Init functions
+ * @brief Init functions
+ * @ingroup api_ll
+ * @{
+ */
+
+/**
+ * @brief Low level ranging and ALS register static settings (you should call @a VL6180x_Prepare() function instead)
+ *
+ * @param dev
+ * @return 0 on success
+ */
+int VL6180x_StaticInit(VL6180xDev_t dev);
+
+ /** @} */
+
+/** @defgroup api_ll_range Ranging functions
+ * @brief Ranging Low Level functions
+ * @ingroup api_ll
+ * @{
+ */
+
+/**
+ * @brief Wait for device to be ready (before a new ranging command can be issued by application)
+ * @param dev The device
+ * @param MaxLoop Max Number of i2c polling loop see @a #msec_2_i2cloop
+ * @return 0 on success. <0 when fail \n
+ * @ref VL6180x_ErrCode_t::TIME_OUT for time out \n
+ * @ref VL6180x_ErrCode_t::INVALID_PARAMS if MaxLop<1
+ */
+int VL6180x_RangeWaitDeviceReady(VL6180xDev_t dev, int MaxLoop );
+
+/**
+ * @brief Program Inter measurement period (used only in continuous mode)
+ *
+ * @par Function Description
+ * When trying to set too long time, it returns #INVALID_PARAMS
+ *
+ * @param dev The device
+ * @param InterMeasTime_msec Requires inter-measurement time in msec
+ * @return 0 on success
+ */
+int VL6180x_RangeSetInterMeasPeriod(VL6180xDev_t dev, uint32_t InterMeasTime_msec);
+
+
+/**
+ * @brief Set device ranging scaling factor
+ *
+ * @par Function Description
+ * The ranging scaling factor is applied on the raw distance measured by the device to increase operating ranging at the price of the precision.
+ * Changing the scaling factor when device is not in f/w standby state (free running) is not safe.
+ * It can be source of spurious interrupt, wrongly scaled range etc ...
+ * @warning __This function doesns't update high/low threshold and other programmed settings linked to scaling factor__.
+ * To ensure proper operation, threshold and scaling changes should be done following this procedure: \n
+ * @li Set Group hold : @a VL6180x_SetGroupParamHold() \n
+ * @li Get Threshold @a VL6180x_RangeGetThresholds() \n
+ * @li Change scaling : @a VL6180x_UpscaleSetScaling() \n
+ * @li Set Threshold : @a VL6180x_RangeSetThresholds() \n
+ * @li Unset Group Hold : @a VL6180x_SetGroupParamHold()
+ *
+ * @param dev The device
+ * @param scaling Scaling factor to apply (1,2 or 3)
+ * @return 0 on success when up-scale support is not configured it fail for any
+ * scaling than the one statically configured.
+ */
+int VL6180x_UpscaleSetScaling(VL6180xDev_t dev, uint8_t scaling);
+
+/**
+ * @brief Get current ranging scaling factor
+ *
+ * @param dev The device
+ * @return The current scaling factor
+ */
+int VL6180x_UpscaleGetScaling(VL6180xDev_t dev);
+
+
+/**
+ * @brief Give filtered state (wrap-around filter) of a range measurement
+ * @param pRangeData Range measurement data
+ * @return 0 means measure was not filtered, when not 0 range from device got filtered by filter post processing
+ */
+#define VL6180x_RangeIsFilteredMeasurement(pRangeData) ((pRangeData)->errorStatus == RangingFiltered)
+
+/**
+ * @brief Get the maximal distance for actual scaling
+ * @par Function Description
+ * Do not use prior to @a VL6180x_Prepare() or at least @a VL6180x_InitData()
+ *
+ * Any range value more than the value returned by this function is to be considered as "no target detected"
+ * or "no target in detectable range" \n
+ * @warning The maximal distance depends on the scaling
+ *
+ * @param dev The device
+ * @return The maximal range limit for actual mode and scaling
+ */
+uint16_t VL6180x_GetUpperLimit(VL6180xDev_t dev);
+
+/**
+ * @brief Apply low and high ranging thresholds that are considered only in continuous mode
+ *
+ * @par Function Description
+ * This function programs low and high ranging thresholds that are considered in continuous mode :
+ * interrupt will be raised only when an object is detected at a distance inside this [low:high] range.
+ * The function takes care of applying current scaling factor if any.\n
+ * To be safe, in continuous operation, thresholds must be changed under "group parameter hold" cover.
+ * Group hold can be activated/deactivated directly in the function or externally (then set 0)
+ * using /a VL6180x_SetGroupParamHold() function.
+ *
+ * @param dev The device
+ * @param low Low threshold in mm
+ * @param high High threshold in mm
+ * @param SafeHold Use of group parameters hold to surround threshold programming.
+ * @return 0 On success
+ */
+int VL6180x_RangeSetThresholds(VL6180xDev_t dev, uint16_t low, uint16_t high, int SafeHold);
+
+/**
+ * @brief Get scaled high and low threshold from device
+ *
+ * @par Function Description
+ * Due to scaling factor, the returned value may be different from what has been programmed first (precision lost).
+ * For instance VL6180x_RangeSetThresholds(dev,11,22) with scale 3
+ * will read back 9 ((11/3)x3) and 21 ((22/3)x3).
+
+ * @param dev The device
+ * @param low scaled low Threshold ptr can be NULL if not needed
+ * @param high scaled High Threshold ptr can be NULL if not needed
+ * @return 0 on success, return value is undefined if both low and high are NULL
+ * @warning return value is undefined if both low and high are NULL
+ */
+int VL6180x_RangeGetThresholds(VL6180xDev_t dev, uint16_t *low, uint16_t *high);
+
+/**
+ * @brief Set ranging raw thresholds (scaling not considered so not recommended to use it)
+ *
+ * @param dev The device
+ * @param low raw low threshold set to raw register
+ * @param high raw high threshold set to raw register
+ * @return 0 on success
+ */
+int VL6180x_RangeSetRawThresholds(VL6180xDev_t dev, uint8_t low, uint8_t high);
+
+/**
+ * @brief Set Early Convergence Estimate ratio
+ * @par Function Description
+ * For more information on ECE check datasheet
+ * @warning May return a calibration warning in some use cases
+ *
+ * @param dev The device
+ * @param FactorM ECE factor M in M/D
+ * @param FactorD ECE factor D in M/D
+ * @return 0 on success. <0 on error. >0 on warning
+ */
+int VL6180x_RangeSetEceFactor(VL6180xDev_t dev, uint16_t FactorM, uint16_t FactorD);
+
+/**
+ * @brief Set Early Convergence Estimate state (See #SYSRANGE_RANGE_CHECK_ENABLES register)
+ * @param dev The device
+ * @param enable State to be set 0=disabled, otherwise enabled
+ * @return 0 on success
+ */
+int VL6180x_RangeSetEceState(VL6180xDev_t dev, int enable );
+
+/**
+ * @brief Set activation state of the wrap around filter
+ * @param dev The device
+ * @param state New activation state (0=off, otherwise on)
+ * @return 0 on success
+ */
+int VL6180x_FilterSetState(VL6180xDev_t dev, int state);
+
+/**
+ * Get activation state of the wrap around filter
+ * @param dev The device
+ * @return Filter enabled or not, when filter is not supported it always returns 0S
+ */
+int VL6180x_FilterGetState(VL6180xDev_t dev);
+
+
+/**
+ * @brief Set activation state of DMax computation
+ * @param dev The device
+ * @param state New activation state (0=off, otherwise on)
+ * @return 0 on success
+ */
+int VL6180x_DMaxSetState(VL6180xDev_t dev, int state);
+
+/**
+ * Get activation state of DMax computation
+ * @param dev The device
+ * @return Filter enabled or not, when filter is not supported it always returns 0S
+ */
+int VL6180x_DMaxGetState(VL6180xDev_t dev);
+
+
+/**
+ * @brief Set ranging mode and start/stop measure (use high level functions instead : @a VL6180x_RangeStartSingleShot() or @a VL6180x_RangeStartContinuousMode())
+ *
+ * @par Function Description
+ * When used outside scope of known polling single shot stopped state, \n
+ * user must ensure the device state is "idle" before to issue a new command.
+ *
+ * @param dev The device
+ * @param mode A combination of working mode (#MODE_SINGLESHOT or #MODE_CONTINUOUS) and start/stop condition (#MODE_START_STOP) \n
+ * @return 0 on success
+ */
+int VL6180x_RangeSetSystemMode(VL6180xDev_t dev, uint8_t mode);
+
+/** @} */
+
+/** @defgroup api_ll_range_calibration Ranging calibration functions
+ * @brief Ranging calibration functions
+ * @ingroup api_ll
+ * @{
+ */
+/**
+ * @brief Get part to part calibration offset
+ *
+ * @par Function Description
+ * Should only be used after a successful call to @a VL6180x_InitData to backup device nvm value
+ *
+ * @param dev The device
+ * @return part to part calibration offset from device
+ */
+int8_t VL6180x_GetOffsetCalibrationData(VL6180xDev_t dev);
+
+/**
+ * Set or over-write part to part calibration offset
+ * \sa VL6180x_InitData(), VL6180x_GetOffsetCalibrationData()
+ * @param dev The device
+ * @param offset Offset
+ */
+void VL6180x_SetOffsetCalibrationData(VL6180xDev_t dev, int8_t offset);
+
+/**
+ * @brief Set Cross talk compensation rate
+ *
+ * @par Function Description
+ * It programs register @a #SYSRANGE_CROSSTALK_COMPENSATION_RATE
+ *
+ * @param dev The device
+ * @param Rate Compensation rate (9.7 fix point) see datasheet for details
+ * @return 0 on success
+ */
+int VL6180x_SetXTalkCompensationRate(VL6180xDev_t dev, FixPoint97_t Rate);
+
+/** @} */
+
+
+
+#if VL6180x_ALS_SUPPORT
+/** @defgroup api_ll_als ALS functions
+ * @brief ALS functions
+ * @ingroup api_ll
+ * @{
+ */
+
+/**
+ * @brief Wait for device to be ready for new als operation or max pollign loop (time out)
+ * @param dev The device
+ * @param MaxLoop Max Number of i2c polling loop see @a #msec_2_i2cloop
+ * @return 0 on success. <0 when @a VL6180x_ErrCode_t::TIME_OUT if timed out
+ */
+int VL6180x_AlsWaitDeviceReady(VL6180xDev_t dev, int MaxLoop );
+
+/**
+ * @brief Set ALS system mode and start/stop measure
+ *
+ * @warning When used outside after single shot polling, \n
+ * User must ensure the device state is ready before issuing a new command (using @a VL6180x_AlsWaitDeviceReady()). \n
+ * Non respect of this, can cause loss of interrupt or device hanging.
+ *
+ * @param dev The device
+ * @param mode A combination of working mode (#MODE_SINGLESHOT or #MODE_CONTINUOUS) and start condition (#MODE_START_STOP) \n
+ * @return 0 on success
+ */
+int VL6180x_AlsSetSystemMode(VL6180xDev_t dev, uint8_t mode);
+
+/** @} */
+#endif
+
+/** @defgroup api_ll_misc Misc functions
+ * @brief Misc functions
+ * @ingroup api_ll
+ * @{
+ */
+
+/**
+ * Set Group parameter Hold state
+ *
+ * @par Function Description
+ * Group parameter holds @a #SYSTEM_GROUPED_PARAMETER_HOLD enable safe update (non atomic across multiple measure) by host
+ * \n The critical register group is composed of: \n
+ * #SYSTEM_INTERRUPT_CONFIG_GPIO \n
+ * #SYSRANGE_THRESH_HIGH \n
+ * #SYSRANGE_THRESH_LOW \n
+ * #SYSALS_INTEGRATION_PERIOD \n
+ * #SYSALS_ANALOGUE_GAIN \n
+ * #SYSALS_THRESH_HIGH \n
+ * #SYSALS_THRESH_LOW
+ *
+ *
+ * @param dev The device
+ * @param Hold Group parameter Hold state to be set (on/off)
+ * @return 0 on success
+ */
+int VL6180x_SetGroupParamHold(VL6180xDev_t dev, int Hold);
+
+/**
+ * @brief Set new device i2c address
+ *
+ * After completion the device will answer to the new address programmed.
+ *
+ * @sa AN4478: Using multiple VL6180X's in a single design
+ * @param dev The device
+ * @param NewAddr The new i2c address (7bit)
+ * @return 0 on success
+ */
+int VL6180x_SetI2CAddress(VL6180xDev_t dev, uint8_t NewAddr);
+
+/**
+ * @brief Fully configure gpio 0/1 pin : polarity and functionality
+ *
+ * @param dev The device
+ * @param pin gpio pin 0 or 1
+ * @param IntFunction Pin functionality : either #GPIOx_SELECT_OFF or #GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT (refer to #SYSTEM_MODE_GPIO1 register definition)
+ * @param ActiveHigh Set active high polarity, or active low see @a ::IntrPol_e
+ * @return 0 on success
+ */
+int VL6180x_SetupGPIOx(VL6180xDev_t dev, int pin, uint8_t IntFunction, int ActiveHigh);
+
+
+/**
+ * @brief Set interrupt pin polarity for the given GPIO
+ *
+ * @param dev The device
+ * @param pin Pin 0 or 1
+ * @param active_high select active high or low polarity using @ref IntrPol_e
+ * @return 0 on success
+ */
+int VL6180x_SetGPIOxPolarity(VL6180xDev_t dev, int pin, int active_high);
+
+/**
+ * Select interrupt functionality for the given GPIO
+ *
+ * @par Function Description
+ * Functionality refer to @a SYSTEM_MODE_GPIO0
+ *
+ * @param dev The device
+ * @param pin Pin to configure 0 or 1 (gpio0 or gpio1)\nNote that gpio0 is chip enable at power up !
+ * @param functionality Pin functionality : either #GPIOx_SELECT_OFF or #GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT (refer to #SYSTEM_MODE_GPIO1 register definition)
+ * @return 0 on success
+ */
+int VL6180x_SetGPIOxFunctionality(VL6180xDev_t dev, int pin, uint8_t functionality);
+
+/**
+ * #brief Disable and turn to Hi-Z gpio output pin
+ *
+ * @param dev The device
+ * @param pin The pin number to disable 0 or 1
+ * @return 0 on success
+ */
+int VL6180x_DisableGPIOxOut(VL6180xDev_t dev, int pin);
+
+/**
+ * @def msec_2_i2cloop
+ * @brief Number of I2C polling loop (an 8 bit register) to run for maximal wait time.
+ *
+ * @par Function Description
+ * When polling via I2C the overall time is mainly the I2C transaction time because it is a slow bus
+ * one 8 bit register poll on I2C bus timing is shown below: \n
+ * start + addr_w(a) + 2x8bit index(a) + stop + start + addr_rd(a) + 1x8bit data_rd(a) + stop \n
+ * 1 8 1 2*(8+1) 1 1 8 1 8 1 1 \n
+ * so 49 serial bits
+ *
+ * @param time_ms Time to wait in milli second 10
+ * @param i2c_khz I2C bus frequencies in KHz for instance 400
+ * @return The number of loops (at least 1)
+ */
+#define msec_2_i2cloop( time_ms, i2c_khz ) (((time_ms)*(i2c_khz)/49)+1)
+
+/** @} */
+
+
+
+/**
+ * polarity use in @a VL6180x_SetupGPIOx() , @a VL6180x_SetupGPIO1()
+ */
+typedef enum {
+ INTR_POL_LOW =0, /*!< set active low polarity best setup for falling edge */
+ INTR_POL_HIGH =1, /*!< set active high polarity best setup for rising edge */
+}IntrPol_e;
+
+/** @defgroup api_ll_intr Interrupts management functions
+ * @brief Interrupts management functions
+ * @ingroup api_ll
+ * @{
+ */
+
+/**
+ * @brief Get all interrupts cause
+ *
+ * @param dev The device
+ * @param status Ptr to interrupt status. You can use @a IntrStatus_t::val
+ * @return 0 on success
+ */
+int VL6180x_GetInterruptStatus(VL6180xDev_t dev, uint8_t *status);
+
+/**
+ * @brief Clear given system interrupt condition
+ *
+ * @par Function Description
+ * Clear given interrupt cause by writing into register #SYSTEM_INTERRUPT_CLEAR register.
+ * @param dev The device
+ * @param IntClear Which interrupt source to clear. Use any combinations of #INTERRUPT_CLEAR_RANGING , #INTERRUPT_CLEAR_ALS , #INTERRUPT_CLEAR_ERROR.
+ * @return 0 On success
+ */
+int VL6180x_ClearInterrupt(VL6180xDev_t dev, uint8_t IntClear );
+
+/**
+ * @brief Clear error interrupt
+ *
+ * @param dev The device
+ * @return 0 On success
+ */
+ #define VL6180x_ClearErrorInterrupt(dev) VL6180x_ClearInterrupt(dev, INTERRUPT_CLEAR_ERROR)
+
+/**
+ * @brief Clear All interrupt causes (als+range+error)
+ *
+ * @param dev The device
+ * @return 0 On success
+ */
+#define VL6180x_ClearAllInterrupt(dev) VL6180x_ClearInterrupt(dev, INTERRUPT_CLEAR_ERROR|INTERRUPT_CLEAR_RANGING|INTERRUPT_CLEAR_ALS)
+
+/** @} */
+
+
+/** @defgroup api_reg API Register access functions
+ * @brief Registers access functions called by API core functions
+ * @ingroup api_ll
+ * @{
+ */
+
+/**
+ * Write VL6180x single byte register
+ * @param dev The device
+ * @param index The register index
+ * @param data 8 bit register data
+ * @return success
+ */
+int VL6180x_WrByte(VL6180xDev_t dev, uint16_t index, uint8_t data);
+/**
+ * Thread safe VL6180x Update (rd/modify/write) single byte register
+ *
+ * Final_reg = (Initial_reg & and_data) |or_data
+ *
+ * @param dev The device
+ * @param index The register index
+ * @param AndData 8 bit and data
+ * @param OrData 8 bit or data
+ * @return 0 on success
+ */
+int VL6180x_UpdateByte(VL6180xDev_t dev, uint16_t index, uint8_t AndData, uint8_t OrData);
+/**
+ * Write VL6180x word register
+ * @param dev The device
+ * @param index The register index
+ * @param data 16 bit register data
+ * @return 0 on success
+ */
+int VL6180x_WrWord(VL6180xDev_t dev, uint16_t index, uint16_t data);
+/**
+ * Write VL6180x double word (4 byte) register
+ * @param dev The device
+ * @param index The register index
+ * @param data 32 bit register data
+ * @return 0 on success
+ */
+int VL6180x_WrDWord(VL6180xDev_t dev, uint16_t index, uint32_t data);
+
+/**
+ * Read VL6180x single byte register
+ * @param dev The device
+ * @param index The register index
+ * @param data pointer to 8 bit data
+ * @return 0 on success
+ */
+int VL6180x_RdByte(VL6180xDev_t dev, uint16_t index, uint8_t *data);
+
+/**
+ * Read VL6180x word (2byte) register
+ * @param dev The device
+ * @param index The register index
+ * @param data pointer to 16 bit data
+ * @return 0 on success
+ */
+int VL6180x_RdWord(VL6180xDev_t dev, uint16_t index, uint16_t *data);
+
+/**
+ * Read VL6180x dword (4byte) register
+ * @param dev The device
+ * @param index The register index
+ * @param data pointer to 32 bit data
+ * @return 0 on success
+ */
+int VL6180x_RdDWord(VL6180xDev_t dev, uint16_t index, uint32_t *data);
+
+/** @} */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VL6180x_API_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Components/VL6180X/vl6180x_appcfg.h Wed Sep 09 16:00:39 2015 +0000 @@ -0,0 +1,92 @@ + +/******************************************************************************* +Copyright © 2014, STMicroelectronics International N.V. +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither the name of STMicroelectronics nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND +NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED. +IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +********************************************************************************/ + + +/* + * vl6180x_appcfg.h + * + */ + +#ifndef VL6180X_APPCFG_H_ +#define VL6180X_APPCFG_H_ + + +/** + * @def VL6180x_SINGLE_DEVICE_DRIVER + * @brief enable lightweight single vl6180x device driver + * + * value 1 => single device capable + * Configure optimized APi for single device driver with static data and minimal use of ref pointer \n + * limited to single device driver or application in non multi thread/core environment \n + * + * value 0 => multiple device capable user must review "device" structure and type in porting files + * @ingroup Configuration + */ +#define VL6180x_SINGLE_DEVICE_DRIVER 1 + + +/** + * @def VL6180x_RANGE_STATUS_ERRSTRING + * @brief when define include range status Error string and related + * + * The string table lookup require some space in read only area + * @ingroup Configuration + */ +#define VL6180x_RANGE_STATUS_ERRSTRING 1 + +/** + * @def VL6180X_SAFE_POLLING_ENTER + * + * @brief Ensure safe polling method when set + * + * Polling for a condition can be hazardous and result in infinite looping if any previous interrupt status + * condition is not cleared. \n + * Setting these flags enforce error clearing on start of polling method to avoid it. + * the drawback are : \n + * @li extra use-less i2c bus usage and traffic + * @li potentially slower measure rate. + * If application ensure interrupt get clear on mode or interrupt configuration change + * then keep option disabled. \n + * To be safe set these option to 1 + * @ingroup Configuration + */ +#define VL6180X_SAFE_POLLING_ENTER 0 + + +/** + * @brief Enable function start/end logging + * + * requires porting @a #LOG_FUNCTION_START @a #LOG_FUNCTION_END @a #LOG_FUNCTION_END_FMT + * @ingroup Configuration + */ +#define VL6180X_LOG_ENABLE 0 + + + +#endif /* VL6180X_APPCFG_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_cfg.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,119 @@
+/*******************************************************************************
+Copyright © 2014, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+/*
+ * $Date: 2015-01-08 14:35:34 +0100 (Thu, 08 Jan 2015) $
+ * $Revision: 2042 $
+ */
+
+/**
+ * @file VL6180x_cfg.h
+ *
+ * Proximity and ALS configuration
+ */
+
+#ifndef VL6180x_CFG_H_
+#define VL6180x_CFG_H_
+
+/** @defgroup api_config Configuration
+ * @brief API static configuration
+ */
+
+
+
+/** @ingroup api_config
+ * @{*/
+
+
+/**
+ * @def VL6180x_UPSCALE_SUPPORT
+ * @brief Configure up-scale capabilities and default up-scale factor for ranging operations
+ *
+ * @li 1 : Fixed scaling by 1 (no up-scaling support)
+ * @li 2 : Fixed scaling by 2
+ * @li 3 : Fixed scaling by 3
+ * @li -1 -2 -3 : Run time programmable through @a VL6180x_UpscaleSetScaling(). Default scaling factore is -VL6180x_UPSCALE_SUPPORT \n
+ */
+#define VL6180x_UPSCALE_SUPPORT -1
+
+/**
+ * @def VL6180x_ALS_SUPPORT
+ * @brief Enable ALS support
+ *
+ * Set to 0 if ALS is not used in application. This can help reducing code size if it is a concern.
+ */
+#define VL6180x_ALS_SUPPORT 1
+
+/**
+ * @def VL6180x_HAVE_DMAX_RANGING
+ * @brief Enable DMax calculation for ranging applications.
+ *
+ * When set to 1, __Dmax__ is returned by API typically when @a VL6180x_RangePollMeasurement() high level
+ * function is called (this is returned in @a VL6180x_RangeData_t structure).
+ * __Dmax__ is an estimation of the maximum distance (in mm) the product can report a valid distance of a 17% target for
+ * the current ambient light conditions (__Dmax__ decreases when ambient light increases). __Dmax__ should be used only
+ * when the product is not able to return a valid distance (no object or object is too far from the ranging sensor).
+ * Typically, this is done by checking the __errorStatus__ field of the @a VL6180x_RangeData_t structure returned by
+ * the @a VL6180x_RangePollMeasurement() function.
+ * You may refer to ::RangeError_u to get full list of supported error codes.
+ * @warning Dmax is estimated for a 17% grey target. If the real target has a reflectance lower than 17%, report Dmax could be over-estimated
+ */
+#define VL6180x_HAVE_DMAX_RANGING 1
+
+/**
+ * @def VL6180x_WRAP_AROUND_FILTER_SUPPORT
+ * @brief Enable wrap around filter (WAF) feature
+ *
+ * In specific conditions, when targeting a mirror or a very reflective metal, a __wrap around__ effect can occur internally to the
+ * ranging product which results in returning a wrong distance (under-estimated). Goal of the WAF is to detect this wrap arround effect
+ * and to filter it by returning a non-valid distance : __errorStatus__ set to 16 (see ::RangeError_u)
+ * @warning Wrap-around filter can not be used when device is running in continuous mode
+ *
+ * @li 0 : Filter is not supported, no filtering code is included in API
+ * @li 1 : Filter is supported and active by default
+ * @li -1 : Filter is supported but is not active by default @a VL6180x_FilterSetState() can turn it on and off at any time
+ */
+#define VL6180x_WRAP_AROUND_FILTER_SUPPORT 1
+
+/**
+ * @def VL6180x_EXTENDED_RANGE
+ * @brief Enable extended ranging support
+ *
+ * Device that do not formally support extended ranging should only be used with a scaling factor of 1.
+ * Correct operation with scaling factor other than 1 (>200mm ) is not granted by ST.
+ */
+#define VL6180x_EXTENDED_RANGE 0
+
+
+#if (VL6180x_EXTENDED_RANGE) && (VL6180x_ALS_SUPPORT)
+#warning "Als support should be OFF for extended range"
+#endif
+
+#endif
+/** @} */ // end of api_config
+
+/* VL6180x_CFG_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_class.cpp Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,317 @@
+/**
+ ******************************************************************************
+ * @file vl6180x_class.cpp
+ * @author AST / EST
+ * @version V0.0.1
+ * @date 14-April-2015
+ * @brief Implementation file for the HTS221 driver class
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "vl6180x_class.h"
+
+
+
+/**
+ * @brief Set HTS221 Initialization
+ * @param HTS221_Init the configuration setting for the HTS221
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+VL6180x_ErrCode_t VL6180X::VL6180X_Init(HUM_TEMP_InitTypeDef *HTS221_Init)
+{
+ uint8_t tmp = 0x00;
+
+ /* Configure the low level interface ---------------------------------------*/
+ if(HTS221_IO_Init() != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ if(HTS221_Power_On() != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ if(HTS221_Calibration() != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ if(HTS221_IO_Read(&tmp, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Output Data Rate selection */
+ tmp &= ~(HTS221_ODR_MASK);
+ tmp |= HTS221_Init->OutputDataRate;
+
+ if(HTS221_IO_Write(&tmp, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ HTS221_IO_ITConfig();
+
+ return HUM_TEMP_OK;
+}
+
+/**
+ * @brief Read ID address of HTS221
+ * @param ht_id the pointer where the ID of the device is stored
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+HUM_TEMP_StatusTypeDef HTS221::HTS221_ReadID(uint8_t *ht_id)
+{
+ if(!ht_id)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ return HTS221_IO_Read(ht_id, HTS221_WHO_AM_I_ADDR, 1);
+}
+
+/**
+ * @brief Reboot memory content of HTS221
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+HUM_TEMP_StatusTypeDef HTS221::HTS221_RebootCmd(void)
+{
+ uint8_t tmpreg;
+
+ /* Read CTRL_REG2 register */
+ if(HTS221_IO_Read(&tmpreg, HTS221_CTRL_REG2_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Enable or Disable the reboot memory */
+ tmpreg |= HTS221_BOOT_REBOOTMEMORY;
+
+ /* Write value to MEMS CTRL_REG2 regsister */
+ if(HTS221_IO_Write(&tmpreg, HTS221_CTRL_REG2_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ return HUM_TEMP_OK;
+}
+
+
+/**
+ * @brief Read HTS221 output register, and calculate the humidity
+ * @param pfData the pointer to data output
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+HUM_TEMP_StatusTypeDef HTS221::HTS221_GetHumidity(float* pfData)
+{
+ int16_t H_T_out, humidity_t;
+ uint8_t tempReg[2] = {0, 0};
+ uint8_t tmp = 0x00;
+ float H_rh;
+
+ if(HTS221_IO_Read(&tmp, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Output Data Rate selection */
+ tmp &= (HTS221_ODR_MASK);
+
+ if(tmp == 0x00)
+ {
+ if(HTS221_IO_Read(&tmp, HTS221_CTRL_REG2_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Serial Interface Mode selection */
+ tmp &= ~(HTS221_ONE_SHOT_MASK);
+ tmp |= HTS221_ONE_SHOT_START;
+
+ if(HTS221_IO_Write(&tmp, HTS221_CTRL_REG2_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ do
+ {
+
+ if(HTS221_IO_Read(&tmp, HTS221_STATUS_REG_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ }
+ while(!(tmp & 0x02));
+ }
+
+
+ if(HTS221_IO_Read(&tempReg[0], (HTS221_HUMIDITY_OUT_L_ADDR | HTS221_I2C_MULTIPLEBYTE_CMD),
+ 2) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ H_T_out = ((((int16_t)tempReg[1]) << 8) + (int16_t)tempReg[0]);
+
+ H_rh = ( float )(((( H_T_out - H0_T0_out ) * ( H1_rh - H0_rh )) / ( H1_T0_out - H0_T0_out )) + H0_rh );
+
+ // Truncate to specific number of decimal digits
+ humidity_t = (uint16_t)(H_rh * pow(10.0f, HUM_DECIMAL_DIGITS));
+ *pfData = ((float)humidity_t) / pow(10.0f, HUM_DECIMAL_DIGITS);
+
+ // Prevent data going below 0% and above 100% due to linear interpolation
+ if ( *pfData < 0.0f ) *pfData = 0.0f;
+ if ( *pfData > 100.0f ) *pfData = 100.0f;
+
+ return HUM_TEMP_OK;
+}
+
+/**
+ * @brief Read HTS221 output register, and calculate the temperature
+ * @param pfData the pointer to data output
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+HUM_TEMP_StatusTypeDef HTS221::HTS221_GetTemperature(float* pfData)
+{
+ int16_t T_out, temperature_t;
+ uint8_t tempReg[2] = {0, 0};
+ uint8_t tmp = 0x00;
+ float T_degC;
+
+ if(HTS221_IO_Read(&tmp, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Output Data Rate selection */
+ tmp &= (HTS221_ODR_MASK);
+
+ if(tmp == 0x00)
+ {
+ if(HTS221_IO_Read(&tmp, HTS221_CTRL_REG2_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Serial Interface Mode selection */
+ tmp &= ~(HTS221_ONE_SHOT_MASK);
+ tmp |= HTS221_ONE_SHOT_START;
+
+ if(HTS221_IO_Write(&tmp, HTS221_CTRL_REG2_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ do
+ {
+
+ if(HTS221_IO_Read(&tmp, HTS221_STATUS_REG_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ }
+ while(!(tmp & 0x01));
+ }
+
+ if(HTS221_IO_Read(&tempReg[0], (HTS221_TEMP_OUT_L_ADDR | HTS221_I2C_MULTIPLEBYTE_CMD),
+ 2) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ T_out = ((((int16_t)tempReg[1]) << 8) + (int16_t)tempReg[0]);
+
+ T_degC = ((float)(T_out - T0_out)) / (T1_out - T0_out) * (T1_degC - T0_degC) + T0_degC;
+
+ temperature_t = (int16_t)(T_degC * pow(10.0f, TEMP_DECIMAL_DIGITS));
+
+ *pfData = ((float)temperature_t) / pow(10.0f, TEMP_DECIMAL_DIGITS);
+
+ return HUM_TEMP_OK;
+}
+
+
+/**
+ * @brief Exit the shutdown mode for HTS221
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+HUM_TEMP_StatusTypeDef HTS221::HTS221_Power_On(void)
+{
+ uint8_t tmpReg;
+
+ /* Read the register content */
+ if(HTS221_IO_Read(&tmpReg, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Set the power down bit */
+ tmpReg |= HTS221_MODE_ACTIVE;
+
+ /* Write register */
+ if(HTS221_IO_Write(&tmpReg, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ return HUM_TEMP_OK;
+}
+
+/**
+ * @brief Enter the shutdown mode for HTS221
+ * @retval HUM_TEMP_OK in case of success, an error code otherwise
+ */
+HUM_TEMP_StatusTypeDef HTS221::HTS221_Power_OFF(void)
+{
+ uint8_t tmpReg;
+
+ /* Read the register content */
+ if(HTS221_IO_Read(&tmpReg, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ /* Reset the power down bit */
+ tmpReg &= ~(HTS221_MODE_ACTIVE);
+
+ /* Write register */
+ if(HTS221_IO_Write(&tmpReg, HTS221_CTRL_REG1_ADDR, 1) != HUM_TEMP_OK)
+ {
+ return HUM_TEMP_ERROR;
+ }
+
+ return HUM_TEMP_OK;
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_class.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,125 @@
+/**
+ ******************************************************************************
+ * @file vl6180x_class.h
+ * @author AST / EST
+ * @version V0.0.1
+ * @date 14-April-2015
+ * @brief Header file for component VL6180X
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+#ifndef __VL6180X_CLASS_H
+#define __VL6180X_CLASS_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "RangeSensor.h"
+#include "LightSensor.h"
+#include "vl6180x_api.h"
+#include "vl6180x_cfg.h"
+#include "vl6180x_def.h"
+#include "vl6180x_i2c.h"
+#include "vl6180x_types.h"
+#include "vl6180x_platform.h"
+#include "vl6180x_appcfg.h"
+
+/* Classes -------------------------------------------------------------------*/
+/** Class representing a VL6180X sensor component
+ */
+class VL6180X : public RangeSensor, public LightSensor {
+ public:
+ /** Constructor
+ * @param[in] i2c device I2C to be used for communication
+ */
+ VL6180X(DevI2C &i2c) : RangeSensor(), LightSensor(), dev_i2c(i2c) {}
+
+ /** Destructor
+ */
+ virtual ~VL6180X() {}
+
+ /*** Interface Methods ***/
+ virtual int Init(void *init_struct) {
+ return VL6180X_Init();
+ }
+
+ virtual int ReadID(uint8_t *ht_id) {
+ return VL6180X_ReadID(ht_id);
+ }
+
+ /**
+ * @brief Reset sensor
+ * @return 0 in case of success, an error code otherwise
+ */
+ virtual int Reset(void) {
+ return VL6180X_RebootCmd();
+ }
+
+ virtual int GetRange(float *pfData) {
+ return VL6180X_GetRange(pfData);
+ }
+
+ virtual int GetLight(float *pfData) {
+ return VL6180X_GetLight(pfData);
+ }
+
+ protected:
+ /*** Methods ***/
+ RANGE_LIGHT_StatusTypeDef VL6180X_Init(RANGE_LIGHT_InitTypeDef *VL6180X_Init);
+ RANGE_LIGHT_StatusTypeDef VL6180X_ReadID(uint8_t *ht_id);
+ RANGE_LIGHT_StatusTypeDef VL6180X_SetID(uint8_t *ht_id);
+ RANGE_LIGHT_StatusTypeDef VL6180X_RebootCmd(void);
+ RANGE_LIGHT_StatusTypeDef VL6180X_GetRange(float* pfData);
+ RANGE_LIGHT_StatusTypeDef VL6180X_GetLight(float* pfData);
+
+ /**
+ * @brief Configures VL6180X interrupt lines for NUCLEO boards
+ */
+ void VL6180X_IO_ITConfig(void)
+ {
+ /* To be implemented */
+ }
+
+ /**
+ * @brief Configures VL6180X I2C interface
+ * @return RANGE_LIGHT_OK in case of success, an error code otherwise
+ */
+ RANGE_LIGHT_StatusTypeDef VL6180X_IO_Init(void)
+ {
+ return RANGE_LIGHT_OK; /* done in constructor */
+ }
+
+
+ /*** Instance Variables ***/
+ /* IO Device */
+ DevI2C &dev_i2c;
+
+
+};
+
+#endif // __VL6180X_CLASS_H
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_def.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,743 @@
+/*******************************************************************************
+Copyright © 2014, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+
+/*
+ * $Date: 2015-05-13 14:12:05 +0200 (Wed, 13 May 2015) $
+ * $Revision: 2290 $
+ */
+
+/**
+ * @file VL6180x_def.h
+ *
+ * @brief Type definitions for vl6180x api.
+ *
+ */
+
+
+#ifndef _VL6180x_DEF
+#define _VL6180x_DEF
+
+/** API major version */
+#define VL6180x_API_REV_MAJOR 3
+/** API minor version */
+#define VL6180x_API_REV_MINOR 0
+/** API sub version */
+#define VL6180x_API_REV_SUB 1
+
+#define VL6180X_STR_HELPER(x) #x
+#define VL6180X_STR(x) VL6180X_STR_HELPER(x)
+
+#include "vl6180x_cfg.h"
+#include "vl6180x_types.h"
+
+/*
+ * check configuration macro raise error or warning and suggest a default value
+ */
+
+#ifndef VL6180x_UPSCALE_SUPPORT
+#error "VL6180x_UPSCALE_SUPPORT not defined"
+/* TODO you must define value for upscale support in your vl6180x_cfg.h */
+#endif
+
+#ifndef VL6180x_ALS_SUPPORT
+#error "VL6180x_ALS_SUPPORT not defined"
+/* TODO you must define VL6180x_ALS_SUPPORT with a value in your vl6180x_cfg.h set to 0 do disable*/
+#endif
+
+#ifndef VL6180x_HAVE_DMAX_RANGING
+#error "VL6180x_HAVE_DMAX_RANGING not defined"
+/* TODO you may remove or comment these #error and keep the default below or update your vl6180x_cfg.h .h file */
+/**
+ * force VL6180x_HAVE_DMAX_RANGING to not supported when not part of cfg file
+ */
+#define VL6180x_HAVE_DMAX_RANGING 0
+#endif
+
+#ifndef VL6180x_EXTENDED_RANGE
+#define VL6180x_EXTENDED_RANGE 0
+#endif
+
+#ifndef VL6180x_WRAP_AROUND_FILTER_SUPPORT
+#error "VL6180x_WRAP_AROUND_FILTER_SUPPORT not defined ?"
+/* TODO you may remove or comment these #error and keep the default below or update vl6180x_cfg.h file */
+/**
+ * force VL6180x_WRAP_AROUND_FILTER_SUPPORT to not supported when not part of cfg file
+ */
+#define VL6180x_WRAP_AROUND_FILTER_SUPPORT 0
+#endif
+
+
+
+
+/****************************************
+ * PRIVATE define do not edit
+ ****************************************/
+
+/** Maximal buffer size ever use in i2c */
+#define VL6180x_MAX_I2C_XFER_SIZE 8 /* At present time it 6 byte max but that can change */
+
+#if VL6180x_UPSCALE_SUPPORT < 0
+/**
+ * @def VL6180x_HAVE_UPSCALE_DATA
+ * @brief is defined if device data structure has data so when user configurable up-scale is active
+ */
+#define VL6180x_HAVE_UPSCALE_DATA /* have data only for user configurable up-scale config */
+#endif
+
+#if VL6180x_WRAP_AROUND_FILTER_SUPPORT
+/**
+ * @def VL6180x_HAVE_WRAP_AROUND_DATA
+ * @brief is defined if device data structure has filter data so when active in cfg file
+ */
+#define VL6180x_HAVE_WRAP_AROUND_DATA
+#endif
+
+#if VL6180x_ALS_SUPPORT != 0
+/**
+ * @def VL6180x_HAVE_ALS_DATA
+ * @brief is defined when als data are include in device data structure so when als suport if configured
+ */
+#define VL6180x_HAVE_ALS_DATA
+#endif
+
+
+#if VL6180x_WRAP_AROUND_FILTER_SUPPORT || VL6180x_HAVE_DMAX_RANGING
+ #define VL6180x_HAVE_RATE_DATA
+#endif
+
+/** Error and warning code returned by API
+ *
+ * negative value are true error mostly fatal\n
+ * positive value are warning most of time it's ok to continue\n
+ */
+enum VL6180x_ErrCode_t{
+ API_NO_ERROR = 0,
+ CALIBRATION_WARNING = 1, /*!< warning invalid calibration data may be in used \a VL6180x_InitData() \a VL6180x_GetOffsetCalibrationData \a VL6180x_SetOffsetCalibrationData*/
+ MIN_CLIPED = 2, /*!< warning parameter passed was clipped to min before to be applied */
+ NOT_GUARANTEED = 3, /*!< Correct operation is not guaranteed typically using extended ranging on vl6180x */
+ NOT_READY = 4, /*!< the data is not ready retry */
+
+ API_ERROR = -1, /*!< Unqualified error */
+ INVALID_PARAMS = -2, /*!< parameter passed is invalid or out of range */
+ NOT_SUPPORTED = -3, /*!< function is not supported in current mode or configuration */
+ RANGE_ERROR = -4, /*!< device report a ranging error interrupt status */
+ TIME_OUT = -5, /*!< aborted due to time out */
+};
+
+/**
+ * Filtered result data structure range data is to be used
+ */
+typedef struct RangeFilterResult_tag {
+ uint16_t range_mm; /*!< Filtered ranging value */
+ uint16_t rawRange_mm; /*!< raw range value (scaled) */
+} RangeFilterResult_t;
+
+/**
+ * "small" unsigned data type used in filter
+ *
+ * if data space saving is not a concern it can be change to platform native unsigned int
+ */
+typedef uint8_t FilterType1_t;
+
+/**
+ * @def FILTER_NBOF_SAMPLES
+ * @brief sample history len used for wrap around filtering
+ */
+#define FILTER_NBOF_SAMPLES 10
+/**
+ * Wrap around filter internal data
+ */
+struct FilterData_t {
+ uint32_t MeasurementIndex; /*!< current measurement index */
+ uint16_t LastTrueRange[FILTER_NBOF_SAMPLES]; /*!< filtered/corrected distance history */
+ uint32_t LastReturnRates[FILTER_NBOF_SAMPLES]; /*!< Return rate history */
+ uint16_t StdFilteredReads; /*!< internal use */
+ FilterType1_t Default_ZeroVal; /*!< internal use */
+ FilterType1_t Default_VAVGVal; /*!< internal use */
+ FilterType1_t NoDelay_ZeroVal; /*!< internal use */
+ FilterType1_t NoDelay_VAVGVal; /*!< internal use */
+ FilterType1_t Previous_VAVGDiff; /*!< internal use */
+};
+
+#if VL6180x_HAVE_DMAX_RANGING
+typedef int32_t DMaxFix_t;
+struct DMaxData_t {
+ uint32_t ambTuningWindowFactor_K; /*!< internal algo tuning (*1000) */
+
+ DMaxFix_t retSignalAt400mm; /*!< intermediate dmax computation value caching @a #SYSRANGE_CROSSTALK_COMPENSATION_RATE and private reg 0x02A */
+ //int32_t RegB8; /*!< register 0xB8 cached to speed reduce i2c traffic for dmax computation */
+ /* place all word data below to optimize struct packing */
+ //int32_t minSignalNeeded; /*!< optimized computation intermediate base on register cached value */
+ int32_t snrLimit_K; /*!< cached and optimized computation intermediate from @a #SYSRANGE_MAX_AMBIENT_LEVEL_MULT */
+ uint16_t ClipSnrLimit; /*!< Max value for snr limit */
+ /* place all byte data below to optimize packing */
+ //uint8_t MaxConvTime; /*!< cached max convergence time @a #SYSRANGE_MAX_CONVERGENCE_TIME*/
+};
+#endif
+
+/**
+ * @struct VL6180xDevData_t
+ *
+ * @brief Per VL6180x device St private data structure \n
+ * End user should never access any of these field directly
+ *
+ * These must never access directly but only via VL6180xDev/SetData(dev, field) macro
+ */
+struct VL6180xDevData_t {
+
+ uint32_t Part2PartAmbNVM; /*!< backed up NVM value */
+ uint32_t XTalkCompRate_KCps; /*! Cached XTlak Compensation Rate */
+
+ uint16_t EceFactorM; /*!< Ece Factor M numerator */
+ uint16_t EceFactorD; /*!< Ece Factor D denominator*/
+
+#ifdef VL6180x_HAVE_ALS_DATA
+ uint16_t IntegrationPeriod; /*!< cached als Integration period avoid slow read from device at each measure */
+ uint16_t AlsGainCode; /*!< cached Als gain avoid slow read from device at each measure */
+ uint16_t AlsScaler; /*!< cached Als scaler avoid slow read from device at each measure */
+#endif
+
+#ifdef VL6180x_HAVE_UPSCALE_DATA
+ uint8_t UpscaleFactor; /*!< up-scaling factor*/
+#endif
+
+#ifdef VL6180x_HAVE_WRAP_AROUND_DATA
+ uint8_t WrapAroundFilterActive; /*!< Filter on/off */
+ struct FilterData_t FilterData; /*!< Filter internal data state history ... */
+#endif
+
+#if VL6180x_HAVE_DMAX_RANGING
+ struct DMaxData_t DMaxData;
+ uint8_t DMaxEnable;
+#endif
+ int8_t Part2PartOffsetNVM; /*!< backed up NVM value */
+};
+
+#if VL6180x_SINGLE_DEVICE_DRIVER
+extern struct VL6180xDevData_t SingleVL6180xDevData;
+#define VL6180xDevDataGet(dev, field) (SingleVL6180xDevData.field)
+/* is also used as direct accessor like VL6180xDevDataGet(dev, x)++*/
+#define VL6180xDevDataSet(dev, field, data) (SingleVL6180xDevData.field)=(data)
+#endif
+
+
+/**
+ * @struct VL6180x_RangeData_t
+ * @brief Range and any optional measurement data.
+ */
+typedef struct {
+ int32_t range_mm; /*!< range distance in mm. */
+ int32_t signalRate_mcps; /*!< signal rate (MCPS)\n these is a 9.7 fix point value, which is effectively a measure of target reflectance.*/
+ uint32_t errorStatus; /*!< Error status of the current measurement. \n
+ see @a ::RangeError_u @a VL6180x_GetRangeStatusErrString() */
+
+
+#ifdef VL6180x_HAVE_RATE_DATA
+ uint32_t rtnAmbRate; /*!< Return Ambient rate in KCount per sec related to \a RESULT_RANGE_RETURN_AMB_COUNT */
+ uint32_t rtnRate; /*!< Return rate in KCount per sec related to \a RESULT_RANGE_RETURN_SIGNAL_COUNT */
+ uint32_t rtnConvTime; /*!< Return Convergence time \a RESULT_RANGE_RETURN_CONV_TIME */
+ uint32_t refConvTime; /*!< Reference convergence time \a RESULT_RANGE_REFERENCE_CONV_TIME */
+#endif
+
+
+#if VL6180x_HAVE_DMAX_RANGING
+ uint32_t DMax; /*!< DMax when applicable */
+#endif
+
+#ifdef VL6180x_HAVE_WRAP_AROUND_DATA
+ RangeFilterResult_t FilteredData; /*!< Filter result main range_mm is updated */
+#endif
+}VL6180x_RangeData_t;
+
+
+/** use where fix point 9.7 bit values are expected
+ *
+ * given a floating point value f it's .7 bit point is (int)(f*(1<<7))*/
+typedef uint16_t FixPoint97_t;
+
+/** lux data type */
+typedef uint32_t lux_t;
+
+/**
+ * @brief This data type defines als measurement data.
+ */
+typedef struct VL6180x_AlsData_st{
+ lux_t lux; /**< Light measurement (Lux) */
+ uint32_t errorStatus; /**< Error status of the current measurement. \n
+ * No Error := 0. \n
+ * Refer to product sheets for other error codes. */
+}VL6180x_AlsData_t;
+
+/**
+ * @brief Range status Error code
+ *
+ * @a VL6180x_GetRangeStatusErrString() if configured ( @a #VL6180x_RANGE_STATUS_ERRSTRING )
+ * related to register @a #RESULT_RANGE_STATUS and additional post processing
+ */
+typedef enum {
+ NoError_=0, /*!< 0 0b0000 NoError */
+ VCSEL_Continuity_Test, /*!< 1 0b0001 VCSEL_Continuity_Test */
+ VCSEL_Watchdog_Test, /*!< 2 0b0010 VCSEL_Watchdog_Test */
+ VCSEL_Watchdog, /*!< 3 0b0011 VCSEL_Watchdog */
+ PLL1_Lock, /*!< 4 0b0100 PLL1_Lock */
+ PLL2_Lock, /*!< 5 0b0101 PLL2_Lock */
+ Early_Convergence_Estimate,/*!< 6 0b0110 Early_Convergence_Estimate */
+ Max_Convergence, /*!< 7 0b0111 Max_Convergence */
+ No_Target_Ignore, /*!< 8 0b1000 No_Target_Ignore */
+ Not_used_9, /*!< 9 0b1001 Not_used */
+ Not_used_10, /*!< 10 0b1010 Not_used_ */
+ Max_Signal_To_Noise_Ratio, /*!< 11 0b1011 Max_Signal_To_Noise_Ratio*/
+ Raw_Ranging_Algo_Underflow,/*!< 12 0b1100 Raw_Ranging_Algo_Underflow*/
+ Raw_Ranging_Algo_Overflow, /*!< 13 0b1101 Raw_Ranging_Algo_Overflow */
+ Ranging_Algo_Underflow, /*!< 14 0b1110 Ranging_Algo_Underflow */
+ Ranging_Algo_Overflow, /*!< 15 0b1111 Ranging_Algo_Overflow */
+
+ /* code below are addition for API/software side they are not hardware*/
+ RangingFiltered =0x10, /*!< 16 0b10000 filtered by post processing*/
+
+} RangeError_u;
+
+
+/** @defgroup device_regdef Device registers & masks definitions
+ * @brief Device registers and masks definitions
+ */
+
+
+/** @ingroup device_regdef
+ * @{*/
+
+/**
+ * The device model ID
+ */
+#define IDENTIFICATION_MODEL_ID 0x000
+/**
+ * Revision identifier of the Device for major change.
+ */
+#define IDENTIFICATION_MODULE_REV_MAJOR 0x003
+/**
+ * Revision identifier of the Device for minor change.
+ */
+#define IDENTIFICATION_MODULE_REV_MINOR 0x004
+
+
+/**
+ * @def SYSTEM_MODE_GPIO0
+ * @brief Configures polarity and select which function gpio 0 serves.
+ * Gpio0 is chip enable at power up ! Be aware of all h/w implication of turning it to output.
+ * Same definition as #SYSTEM_MODE_GPIO1
+ * @ingroup device_regdef
+ */
+#define SYSTEM_MODE_GPIO0 0x010
+/**
+ * @def SYSTEM_MODE_GPIO1
+ * @brief Configures polarity and select what als or ranging functionality gpio pin serves.
+ *
+ * Function can be #GPIOx_SELECT_OFF #GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT.\n
+ * Same definition apply to register GPIO0 that is used as chip enable at power up.
+ * @ingroup device_regdef
+ */
+#define SYSTEM_MODE_GPIO1 0x011
+ /** gpio pad POLARITY mask in #SYSTEM_MODE_GPIO1 (and/or 0) write 1 to set active high polarity (positive edge) */
+ #define GPIOx_POLARITY_SELECT_MASK 0x20
+ /** gpio pad Function select shift in #SYSTEM_MODE_GPIO1 or 0 */
+ #define GPIOx_FUNCTIONALITY_SELECT_SHIFT 1
+ /** gpio pad Function select mask in #SYSTEM_MODE_GPIO1 or 0 */
+ #define GPIOx_FUNCTIONALITY_SELECT_MASK (0xF<<GPIOx_FUNCTIONALITY_SELECT_SHIFT)
+ /** select no interrupt in #SYSTEM_MODE_GPIO1 pad is put in Hi-Z*/
+ #define GPIOx_SELECT_OFF 0x00
+ /** select gpiox as interrupt output in #SYSTEM_MODE_GPIO1 */
+ #define GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT 0x08
+ /** select range as source for interrupt on in #SYSTEM_MODE_GPIO1 */
+ #define GPIOx_MODE_SELECT_RANGING 0x00
+ /** select als as source for interrupt on in #SYSTEM_MODE_GPIO1 */
+ #define GPIOx_MODE_SELECT_ALS 0x01
+
+
+/**
+ * @def SYSTEM_INTERRUPT_CONFIG_GPIO
+ *
+ * @brief Configure Als and Ranging interrupt reporting
+ *
+ * Possible values for Range and ALS are\n
+ *
+ * #CONFIG_GPIO_INTERRUPT_DISABLED\n
+ * #CONFIG_GPIO_INTERRUPT_LEVEL_LOW\n
+ * #CONFIG_GPIO_INTERRUPT_LEVEL_HIGH\n
+ * #CONFIG_GPIO_INTERRUPT_OUT_OF_WINDOW\n
+ * #CONFIG_GPIO_INTERRUPT_NEW_SAMPLE_READY\n
+ * Apply respective rang/als shift and mask \n
+ * #CONFIG_GPIO_RANGE_SHIFT and full reg mask #CONFIG_GPIO_RANGE_MASK\n
+ * #CONFIG_GPIO_ALS_SHIFT and full reg mask #CONFIG_GPIO_ALS_MASK\n
+ *
+ * \sa GPIO use for interrupt #SYSTEM_MODE_GPIO0 or #SYSTEM_MODE_GPIO1\n
+ * @ingroup device_regdef
+ */
+#define SYSTEM_INTERRUPT_CONFIG_GPIO 0x014
+ /** RANGE bits shift in #SYSTEM_INTERRUPT_CONFIG_GPIO */
+ #define CONFIG_GPIO_RANGE_SHIFT 0
+ /** RANGE bits mask in #SYSTEM_INTERRUPT_CONFIG_GPIO (unshifted)*/
+ #define CONFIG_GPIO_RANGE_MASK (0x7<<CONFIG_GPIO_RANGE_SHIFT)
+ /** ALS bits shift in #SYSTEM_INTERRUPT_CONFIG_GPIO */
+ #define CONFIG_GPIO_ALS_SHIFT 3
+ /** ALS bits mask in #SYSTEM_INTERRUPT_CONFIG_GPIO (unshifted)*/
+ #define CONFIG_GPIO_ALS_MASK (0x7<<CONFIG_GPIO_ALS_SHIFT)
+ /** interrupt is disabled */
+ #define CONFIG_GPIO_INTERRUPT_DISABLED 0x00
+ /** trigger when value < low threshold */
+ #define CONFIG_GPIO_INTERRUPT_LEVEL_LOW 0x01
+ /** trigger when value < low threshold */
+ #define CONFIG_GPIO_INTERRUPT_LEVEL_HIGH 0x02
+ /** trigger when outside range defined by high low threshold */
+ #define CONFIG_GPIO_INTERRUPT_OUT_OF_WINDOW 0x03
+ /** trigger when new sample are ready */
+ #define CONFIG_GPIO_INTERRUPT_NEW_SAMPLE_READY 0x04
+
+/**
+ * @def SYSTEM_INTERRUPT_CLEAR
+ * @brief Writing to this register will clear interrupt source
+ *
+ * Use or combination of any #INTERRUPT_CLEAR_RANGING , #INTERRUPT_CLEAR_ALS , #INTERRUPT_CLEAR_ERROR
+ * @ingroup device_regdef
+ */
+#define SYSTEM_INTERRUPT_CLEAR 0x015
+ /** clear ranging interrupt in write to #SYSTEM_INTERRUPT_CLEAR */
+ #define INTERRUPT_CLEAR_RANGING 0x01
+ /** clear als interrupt in write to #SYSTEM_INTERRUPT_CLEAR */
+ #define INTERRUPT_CLEAR_ALS 0x02
+ /** clear error interrupt in write to #SYSTEM_INTERRUPT_CLEAR */
+ #define INTERRUPT_CLEAR_ERROR 0x04
+
+/** After power up or reset this register will start reading 1 when device is ready */
+#define SYSTEM_FRESH_OUT_OF_RESET 0x016
+
+/**
+ * @def SYSTEM_GROUPED_PARAMETER_HOLD
+ * @brief Writing 1/0 activate/deactivate safe host update of multiple register in critical group \n
+ * rather use \a VL6180x_SetGroupParamHold()
+ *
+ * The critical register group is made of: \n
+ * #SYSTEM_INTERRUPT_CONFIG_GPIO \n
+ * #SYSRANGE_THRESH_HIGH \n
+ * #SYSRANGE_THRESH_LOW \n
+ * #SYSALS_INTEGRATION_PERIOD \n
+ * #SYSALS_ANALOGUE_GAIN \n
+ * #SYSALS_THRESH_HIGH \n
+ * #SYSALS_THRESH_LOW
+ * @ingroup device_regdef
+ */
+#define SYSTEM_GROUPED_PARAMETER_HOLD 0x017
+
+
+/**
+ * @def SYSRANGE_START
+ * @brief Start/stop and set operating range mode
+ *
+ * Write Combination of #MODE_START_STOP and #MODE_CONTINUOUS to select and start desired operation.
+ *
+ * @ingroup device_regdef
+ */
+#define SYSRANGE_START 0x018
+ /** mask existing bit in #SYSRANGE_START*/
+ #define MODE_MASK 0x03
+ /** bit 0 in #SYSRANGE_START write 1 toggle state in continuous mode and arm next shot in single shot mode */
+ #define MODE_START_STOP 0x01
+ /** bit 1 write 1 in #SYSRANGE_START set continuous operation mode */
+ #define MODE_CONTINUOUS 0x02
+ /** bit 1 write 0 in #SYSRANGE_START set single shot mode */
+ #define MODE_SINGLESHOT 0x00
+
+/**
+ * @def SYSRANGE_THRESH_HIGH
+ * High level range threshold (must be scaled)
+ * @ingroup device_regdef
+ */
+#define SYSRANGE_THRESH_HIGH 0x019
+
+/**
+ * @def SYSRANGE_THRESH_LOW
+ * Low level range threshold (must be scaled)
+ * @ingroup device_regdef
+ */
+#define SYSRANGE_THRESH_LOW 0x01A
+
+/**
+ * @def SYSRANGE_INTERMEASUREMENT_PERIOD
+ * @brief Continuous mode intermeasurement delay \a VL6180x_RangeSetInterMeasPeriod()
+ *
+ * Time delay between measurements in Ranging continuous mode.\n
+ * Range 0-254 (0 = 10ms).\n Step size = 10ms.
+ *
+ * @ingroup device_regdef
+ */
+#define SYSRANGE_INTERMEASUREMENT_PERIOD 0x01B
+
+/**
+ * @brief Maximum time to run measurement in Ranging modes.
+ * Range 1 - 63 ms (1 code = 1 ms);
+ *
+ * Measurement aborted when limit reached to aid power reduction.\
+ * For example, 0x01 = 1ms, 0x0a = 10ms.\
+ * Note: Effective max_convergence_time depends on readout_averaging_sample_period setting.
+ *
+ * @ingroup device_regdef
+ */
+#define SYSRANGE_MAX_CONVERGENCE_TIME 0x01C
+/**@brief Cross talk compensation rate
+ * @warning never write register directly use @a VL6180x_SetXTalkCompensationRate()
+ * refer to manual for calibration procedure and computation
+ * @ingroup device_regdef
+ */
+#define SYSRANGE_CROSSTALK_COMPENSATION_RATE 0x01E
+/**
+ * @brief Minimum range value in mm to qualify for crosstalk compensation
+ */
+#define SYSRANGE_CROSSTALK_VALID_HEIGHT 0x021
+#define SYSRANGE_EARLY_CONVERGENCE_ESTIMATE 0x022
+#define SYSRANGE_PART_TO_PART_RANGE_OFFSET 0x024
+#define SYSRANGE_RANGE_IGNORE_VALID_HEIGHT 0x025
+#define SYSRANGE_RANGE_IGNORE_THRESHOLD 0x026
+#define SYSRANGE_EMITTER_BLOCK_THRESHOLD 0x028
+#define SYSRANGE_MAX_AMBIENT_LEVEL_THRESH 0x02A
+#define SYSRANGE_MAX_AMBIENT_LEVEL_MULT 0x02C
+/** @brief various Enable check enabel register
+ * @a VL6180x_RangeSetEceState()
+ */
+#define SYSRANGE_RANGE_CHECK_ENABLES 0x02D
+ #define RANGE_CHECK_ECE_ENABLE_MASK 0x01
+ #define RANGE_CHECK_RANGE_ENABLE_MASK 0x02
+ #define RANGE_CHECK_SNR_ENABLKE 0x10
+
+#define SYSRANGE_VHV_RECALIBRATE 0x02E
+#define SYSRANGE_VHV_REPEAT_RATE 0x031
+
+/**
+ * @def SYSALS_START
+ * @brief Start/stop and set operating als mode
+ *
+ * same bit definition as range \a #SYSRANGE_START \n
+ */
+#define SYSALS_START 0x038
+
+/** ALS low Threshold high */
+#define SYSALS_THRESH_HIGH 0x03A
+/** ALS low Threshold low */
+#define SYSALS_THRESH_LOW 0x03C
+/** ALS intermeasurement period */
+#define SYSALS_INTERMEASUREMENT_PERIOD 0x03E
+/**
+ * @warning or value with 0x40 when writing to these register*/
+#define SYSALS_ANALOGUE_GAIN 0x03F
+/** ALS integration period */
+#define SYSALS_INTEGRATION_PERIOD 0x040
+
+/**
+ * @brief Result range status
+ *
+ * Hold the various range interrupt flags and error Specific error codes
+ */
+#define RESULT_RANGE_STATUS 0x04D
+ /** Device ready for new command bit 0*/
+ #define RANGE_DEVICE_READY_MASK 0x01
+ /** mask for error status covers bits [7:4] in #RESULT_RANGE_STATUS @a ::RangeError_u */
+ #define RANGE_ERROR_CODE_MASK 0xF0 /* */
+ /** range error bit position in #RESULT_RANGE_STATUS */
+ #define RANGE_ERROR_CODE_SHIFT 4
+
+/**
+ * @def RESULT_ALS_STATUS
+ * @brief Result als status \n
+ * Hold the various als interrupt flags and Specific error codes
+ */
+#define RESULT_ALS_STATUS 0x4E
+ /** Device ready for new command bit 0*/
+ #define ALS_DEVICE_READY_MASK 0x01
+
+/**
+ * @def RESULT_ALS_VAL
+ * @brief 16 Bit ALS count output value.
+ *
+ * Lux value depends on Gain and integration settings and calibrated lux/count setting
+ * \a VL6180x_AlsGetLux() \a VL6180x_AlsGetMeasurement()
+ */
+#define RESULT_ALS_VAL 0x50
+
+/**
+ * @def FW_ALS_RESULT_SCALER
+ * @brief Als scaler register Bits [3:0] analogue gain 1 to 16x
+ * these register content is cached by API in \a VL6180xDevData_t::AlsScaler
+ * for lux computation acceleration
+ */
+#define FW_ALS_RESULT_SCALER 0x120
+
+
+/**
+ * these union can be use as a generic bit field type for map #RESULT_INTERRUPT_STATUS_GPIO register
+ * @ingroup device_regdef
+ */
+typedef union IntrStatus_u{
+ uint8_t val; /*!< raw 8 bit register value*/
+ struct {
+ unsigned Range :3; /*!< Range status one of :\n \a #RES_INT_STAT_GPIO_LOW_LEVEL_THRESHOLD \n \a #RES_INT_STAT_GPIO_HIGH_LEVEL_THRESHOLD \n \a #RES_INT_STAT_GPIO_OUT_OF_WINDOW \n \a #RES_INT_STAT_GPIO_NEW_SAMPLE_READY */
+ unsigned Als :3; /*!< Als status one of: \n \a #RES_INT_STAT_GPIO_LOW_LEVEL_THRESHOLD \n \a #RES_INT_STAT_GPIO_HIGH_LEVEL_THRESHOLD \n \a #RES_INT_STAT_GPIO_OUT_OF_WINDOW \n \a #RES_INT_STAT_GPIO_NEW_SAMPLE_READY */
+ unsigned Error :2; /*!< Error status of: \n \a #RES_INT_ERROR_LASER_SAFETY \n \a #RES_INT_ERROR_PLL */
+ } status; /*!< interrupt status as bit field */
+} IntrStatus_t;
+
+/**
+ * @def RESULT_INTERRUPT_STATUS_GPIO
+ * @brief System interrupt status report selected interrupt for als and ranging
+ *
+ * These register can be polled even if no gpio pins is active\n
+ * What reported is selected by \a #SYSTEM_INTERRUPT_CONFIG_GPIO \n
+ * Range mask with \a #RES_INT_RANGE_MASK and shit by \a #RES_INT_RANGE_SHIFT
+ * Als mask with \a #RES_INT_ALS_MASK and shit by \a #RES_INT_ALS_SHIFT
+ * Result value express condition (or combination?)
+ * \a #RES_INT_STAT_GPIO_LOW_LEVEL_THRESHOLD \n
+ * \a #RES_INT_STAT_GPIO_HIGH_LEVEL_THRESHOLD \n
+ * \a #RES_INT_STAT_GPIO_OUT_OF_WINDOW \n
+ * \a #RES_INT_STAT_GPIO_NEW_SAMPLE_READY
+ *
+ * @ingroup device_regdef
+ */
+#define RESULT_INTERRUPT_STATUS_GPIO 0x4F
+ /** ranging interrupt 1st bit position in #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_RANGE_SHIFT 0
+ /** ALS interrupt 1st bit position in #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_ALS_SHIFT 3
+ /** interrupt bit position in #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_ERROR_SHIFT 6
+ /** Ranging interrupt mask in #RESULT_INTERRUPT_STATUS_GPIO (prior to shift) \sa IntrStatus_t */
+ #define RES_INT_RANGE_MASK (0x7<<RES_INT_RANGE_SHIFT)
+ /** als interrupt mask in #RESULT_INTERRUPT_STATUS_GPIO (prior to shift) \sa IntrStatus_t */
+ #define RES_INT_ALS_MASK (0x7<<RES_INT_ALS_SHIFT)
+
+ /** low threshold condition in #RESULT_INTERRUPT_STATUS_GPIO for */
+ #define RES_INT_STAT_GPIO_LOW_LEVEL_THRESHOLD 0x01
+ /** high threshold condition in #RESULT_INTERRUPT_STATUS_GPIO for ALs or Rage*/
+ #define RES_INT_STAT_GPIO_HIGH_LEVEL_THRESHOLD 0x02
+ /** out of window condition in #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_STAT_GPIO_OUT_OF_WINDOW 0x03
+ /** new sample ready in #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_STAT_GPIO_NEW_SAMPLE_READY 0x04
+ /** error in #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_ERROR_MASK (0x3<<RES_INT_ERROR_SHIFT)
+ /** laser safety error on #RES_INT_ERROR_MASK of #RESULT_INTERRUPT_STATUS_GPIO */
+ #define RES_INT_ERROR_LASER_SAFETY 1
+ /** pll 1 or 2 error on #RES_INT_ERROR_MASK of #RESULT_INTERRUPT_STATUS_GPIO*/
+ #define RES_INT_ERROR_PLL 2
+
+/**
+ * Final range result value presented to the user for use. Unit is in mm.
+ */
+#define RESULT_RANGE_VAL 0x062
+
+/**
+ * Raw Range result value with offset applied (no cross talk compensation applied). Unit is in mm.
+ */
+#define RESULT_RANGE_RAW 0x064
+
+/**
+ * @brief Sensor count rate of signal returns correlated to IR emitter.
+ *
+ * Computed from RETURN_SIGNAL_COUNT / RETURN_CONV_TIME. Mcps 9.7 format
+ */
+#define RESULT_RANGE_SIGNAL_RATE 0x066
+
+/**
+ * @brief Return signal count
+ *
+ * Sensor count output value attributed to signal correlated to IR emitter on the Return array.
+ */
+#define RESULT_RANGE_RETURN_SIGNAL_COUNT 0x06C
+
+/**
+ * @brief Reference signal count
+ *
+ * sensor count output value attributed to signal correlated to IR emitter on the Reference array.
+ */
+#define RESULT_RANGE_REFERENCE_SIGNAL_COUNT 0x070
+
+/**
+ * @brief Return ambient count
+ *
+ * sensor count output value attributed to uncorrelated ambient signal on the Return array.
+ * Must be multiplied by 6 if used to calculate the ambient to signal threshold
+ */
+#define RESULT_RANGE_RETURN_AMB_COUNT 0x074
+
+/**
+ * @brief Reference ambient count
+ *
+ * Sensor count output value attributed to uncorrelated ambient signal on the Reference array.
+ */
+#define RESULT_RANGE_REFERENCE_AMB_COUNT 0x078
+
+/**
+ * sensor count output value attributed to signal on the Return array.
+ */
+#define RESULT_RANGE_RETURN_CONV_TIME 0x07C
+
+/**
+ * sensor count output value attributed to signal on the Reference array.
+ */
+#define RESULT_RANGE_REFERENCE_CONV_TIME 0x080
+
+
+/**
+ * @def RANGE_SCALER
+ * @brief RANGE scaling register
+ *
+ * Never should user write directly onto that register directly \a VL6180x_UpscaleSetScaling()
+ */
+#define RANGE_SCALER 0x096
+
+/**
+ * @def READOUT_AVERAGING_SAMPLE_PERIOD
+ * @brief Readout averaging sample period register
+ *
+ *
+ * The internal readout averaging sample period can be adjusted from 0 to 255.
+ * Increasing the sampling period decreases noise but also reduces the effective
+ * max convergence time and increases power consumption
+ * Each unit sample period corresponds to around 64.5 μs additional processing time.
+ * The recommended setting is 48 which equates to around 4.3 ms.
+ *
+ * see datasheet for more detail
+ */
+#define READOUT_AVERAGING_SAMPLE_PERIOD 0x10A
+
+/**
+ * @def I2C_SLAVE_DEVICE_ADDRESS
+ * User programmable I2C address (7-bit). Device address can be re-designated after power-up.
+ * @warning What programmed in the register 7-0 are bit 8-1 of i2c address on bus (bit 0 is rd/wr)
+ * so what prohamd is commonly whar ergfer as adrerss /2
+ * @sa VL6180x_SetI2CAddress()
+ */
+#define I2C_SLAVE_DEVICE_ADDRESS 0x212
+
+#endif /* _VL6180x_DEF */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_i2c.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,166 @@
+/*
+ * $Date: 2015-01-08 14:30:24 +0100 (Thu, 08 Jan 2015) $
+ * $Revision: 2039 $
+ */
+
+/**
+ * @file vl6180x_i2c.h
+ *
+ * @brief CCI interface to "raw i2c" translation layer
+ */
+
+#ifndef VL6180_I2C_H_
+#define VL6180_I2C_H_
+
+#include "vl6180x_platform.h"
+
+/**
+ * @defgroup cci_i2c CCI to RAW I2C translation layer
+ *
+ * This optional tranlation layer is implemented in __platform/cci-i2c__ directory. If user uses this translation layer for his platform, only @a VL6180x_I2CRead() and
+ * @a VL6180x_I2CWrite() functions need to be implemented. Also, some code adaption (via macro) is required for multi-threading and for multiple device support.
+ *
+ * File vl6180x_i2c.c implements device register access via raw i2c access. If the targeted application and platform has no multi-thread, no multi-cpu and uses single
+ * device, then nothing else is required than the 2 mandatory function : @a VL6180x_I2CRead() and @a VL6180x_I2CWrite().\n
+ * In other cases, review and customize @a VL6180x_GetI2CAccess() and @a VL6180x_DoneI2CAccess() functions as well as @a #VL6180x_I2C_USER_VAR macro. This should be enough
+ * to conform to a wide range of platform OS and application requirements .\n
+ *
+ * If your configured i2c for per device buffer via @a #I2C_BUFFER_CONFIG == 2, you must implement @a VL6180x_GetI2cBuffer()
+ *
+ * __I2C Port sample__ \n
+ * A __linux kernel__ port need a "long flags" var for its spin_lock in all functions. the following code example declares a spin lock "lock" in the custom device structure. \n
+ * @code
+struct MyVL6180Dev_t {
+ struct VL6180xDevData_t StData;
+ ...
+ spinlock_t i2c_lock;
+};
+typedef struct MyVL6180Dev_t *VL6180xDev_t;
+
+#define VL6180x_I2C_USER_VAR unsigned long flags;
+#define GetI2CAccess(dev) spin_lock_irqsave(dev->i2c_lock, flags)
+#define DoneI2CAccess(dev) spin_unlock_irqrestore(dev->i2c_lock,flags)
+@endcode
+
+* __POSIX pthread__ application porting could be as follows :\n
+* @code
+struct MyVL6180Dev_t {
+ struct VL6180xDevData_t StData;
+ ...
+ pthread_mutex_t *lock;
+};
+typedef struct MyVL6180Dev_t *VL6180xDev_t;
+
+#define VL6180x_I2C_USER_VAR //no need
+#define VL6180x_GetI2CAccess(dev) pthread_mutex_lock(dev->lock)
+#define VL6180x_DoneI2CAcces(dev) pthread_mutex_unlock(dev->lock)
+ * @endcode
+ */
+
+/**
+ * @def I2C_BUFFER_CONFIG
+ *
+ * @brief Configure device register I2C access
+ *
+ * @li 0 : one GLOBAL buffer \n
+ * Use one global buffer of MAX_I2C_XFER_SIZE byte in data space \n
+ * This solution is not multi-device compliant nor multi-thread cpu safe \n
+ * It can be the best option for small 8/16 bit MCU without stack and limited ram (STM8s, 80C51 ...)
+ *
+ * @li 1 : ON_STACK/local \n
+ * Use local variable (on stack) buffer \n
+ * This solution is multi-thread with use of i2c resource lock or mutex see @a VL6180x_GetI2CAccess() \n
+ *
+ * @li 2 : User defined \n
+ * Per device potentially dynamic allocated. Requires @a VL6180x_GetI2cBuffer() to be implemented.
+ * @ingroup Configuration
+ */
+#define I2C_BUFFER_CONFIG 1
+
+/**
+ * @brief Write data buffer to VL6180x device via i2c
+ * @param dev The device to write to
+ * @param buff The data buffer
+ * @param len The length of the transaction in byte
+ * @return 0 on success
+ * @ingroup cci_i2c
+ */
+int VL6180x_I2CWrite(VL6180xDev_t dev, uint8_t *buff, uint8_t len);
+
+/**
+ *
+ * @brief Read data buffer from VL6180x device via i2c
+ * @param dev The device to read from
+ * @param buff The data buffer to fill
+ * @param len The length of the transaction in byte
+ * @return 0 on success
+ * @ingroup cci_i2c
+ */
+int VL6180x_I2CRead(VL6180xDev_t dev, uint8_t *buff, uint8_t len);
+
+
+/**
+ * @brief Declare any required variables used by i2c lock (@a VL6180x_DoneI2CAccess() and @a VL6180x_GetI2CAccess())
+ * and buffer access : @a VL6180x_GetI2cBuffer()
+ *
+ * @ingroup cci_i2c
+ */
+#define VL6180x_I2C_USER_VAR
+
+/**
+ * @brief Acquire lock or mutex for access to i2c data buffer and bus.\n
+ * Delete the default VL6180x_GetI2CAccess 'do-nothing' macro below if you decide to implement this function.
+ *
+ * This function is used to perform i2c bus level and multiple access locking required for multi thread/proccess system.\n
+ * Multiple access (read and update) will lock once and do multiple basic i2c rd/wr to complete the overall transfer.\n
+ * When no locking is needed this can be a void macro.\n
+ *
+ * @param dev the device
+ * @ingroup cci_i2c
+ */
+void VL6180x_GetI2CAccess(VL6180xDev_t dev);
+
+/**
+ * @def VL6180x_GetI2CAccess
+ * @brief Default 'do-nothing' macro for @a VL6180x_GetI2CAccess(). Delete if used.
+ * @ingroup cci_i2c
+ */
+#define VL6180x_GetI2CAccess(dev) (void)0 /* TODO delete if function used */
+
+/**
+ * @brief Release acquired lock or mutex for i2c access.\n
+ * Delete default VL6180x_DoneI2CAccess 'do-nothing' macro below if implementing that function.
+ *
+ * This function is used to release the acquired lock.
+ * @param dev The device
+ * @ingroup cci_i2c
+ */
+void VL6180x_DoneI2CAccess(VL6180xDev_t dev);
+
+/** @def VL6180x_DoneI2CAcces
+ * @brief Default 'do-nothing' macro for @a VL6180x_DoneI2CAcces(). Delete if used.
+ * @ingroup cci_i2c
+ */
+#define VL6180x_DoneI2CAcces(dev) (void)0 /*TODO delete if function used */
+
+/**
+ * @brief Provided data buffer for i2c access for at least n_byte.
+ *
+ * You must implement it when i2c @a #I2C_BUFFER_CONFIG is set to 2 (User defined).\n
+ * This is used used in the context of #VL6180x_I2C_USER_VAR
+ *
+ * @param dev The device
+ * @param n_byte Minimal number of byte
+ * @return The buffer (cannot fail return not checked)
+ * @ingroup cci_i2c
+ */
+uint8_t *VL6180x_GetI2cBuffer(VL6180xDev_t dev, int n_byte);
+#if I2C_BUFFER_CONFIG == 2
+#error /* TODO add your macro of code here for VL6180x_GetI2cBuffer */
+#endif
+
+
+
+
+
+#endif /* VL6180_I2C_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_platform.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,115 @@
+/*******************************************************************************
+Copyright © 2014, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+
+
+
+/* vl6180x_platform.h STM32 Nucelo F401 single device using generic cci-i2c
+ * trace via swo port some GnuArm eclipse toolset */
+
+#ifndef VL6180x_PLATFORM
+#define VL6180x_PLATFORM
+
+
+#include "vl6180x_appcfg.h"
+#include "vl6180x_def.h"
+
+
+
+#define VL6180x_DEV_DATA_ATTR
+
+#define ROMABLE_DATA
+/* #define ROMABLE_DATA __attribute__ ((section ("user_rom"))) */
+
+
+
+#if VL6180X_LOG_ENABLE
+/* dot not include non ansi here trace was a case :( */
+#ifdef TRACE
+#include "diag/trace.h"
+extern volatile uint32_t g_TickCnt;
+#define LOG_GET_TIME() g_TickCnt
+#else
+/* these is nto stm32 vl6180x GNuArm eclpse build*/
+#define trace_printf(...) (void)0
+#define LOG_GET_TIME() (int)0 /* add your code here expect to be an integer native (%d) type value */
+#endif
+
+
+
+#define LOG_FUNCTION_START(fmt, ... ) \
+ trace_printf("beg %s start @%d\t" fmt "\n", __func__, LOG_GET_TIME(), ##__VA_ARGS__)
+
+#define LOG_FUNCTION_END(status)\
+ trace_printf("end %s @%d %d\n", __func__, LOG_GET_TIME(), (int)status)
+
+#define LOG_FUNCTION_END_FMT(status, fmt, ... )\
+ trace_printf("End %s @%d %d\t"fmt"\n" , __func__, LOG_GET_TIME(), (int)status, ##__VA_ARGS__)
+
+#define VL6180x_ErrLog(msg, ... )\
+ do{\
+ trace_printf("ERR in %s line %d\n" msg, __func__, __LINE__, ##__VA_ARGS__);\
+ }while(0)
+
+#else /* VL6180X_LOG_ENABLE no logging */
+ void OnErrLog(void);
+ #define LOG_FUNCTION_START(...) (void)0
+ #define LOG_FUNCTION_END(...) (void)0
+ #define LOG_FUNCTION_END_FMT(...) (void)0
+ #define VL6180x_ErrLog(... ) OnErrLog()
+#endif
+
+
+#if VL6180x_SINGLE_DEVICE_DRIVER
+ typedef uint8_t VL6180xDev_t;
+
+#else /* VL6180x_SINGLE_DEVICE_DRIVER */
+
+ struct MyVL6180Dev_t {
+ struct VL6180xDevData_t Data;
+ #if I2C_BUFFER_CONFIG == 2
+ uint8_t i2c_buffer[VL6180x_MAX_I2C_XFER_SIZE];
+ #define VL6180x_GetI2cBuffer(dev, n) ((dev)->i2c_buffer)
+ #endif
+ };
+ typedef struct MyVL6180Dev_t *VL6180xDev_t;
+
+#define VL6180xDevDataGet(dev, field) (dev->Data.field)
+#define VL6180xDevDataSet(dev, field, data) (dev->Data.field)=(data)
+
+#endif /* #else VL6180x_SINGLE_DEVICE_DRIVER */
+
+void VL6180x_PollDelay(VL6180xDev_t dev);
+
+void DISP_ExecLoopBody(void);
+#define VL6180x_PollDelay(dev) DISP_ExecLoopBody();
+
+
+#endif /* VL6180x_PLATFORM */
+
+
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_types.h Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,62 @@
+/*******************************************************************************
+Copyright © 2014, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+
+#ifndef VL6180x_TYPES_H_
+#define VL6180x_TYPES_H_
+
+
+#include <stdint.h>
+#include <stddef.h> /* these is for NULL */
+
+#ifndef NULL
+#error "review NULL definition or add required include "
+#endif
+
+#if !defined(STDINT_H) && !defined(_GCC_STDINT_H) && !defined(__STDINT_DECLS) && !defined(_STDINT) && !defined(_STDINT_H)
+
+#pragma message("Please review type definition of STDINT define for your platform and add to list above ")
+
+ /*
+ * target platform do not provide stdint or use a different #define than above
+ * to avoid seeing the message below addapt the #define list above or implement
+ * all type and delete these pragma
+ */
+
+typedef unsigned int uint32_t;
+typedef int int32_t;
+
+typedef unsigned short uint16_t;
+typedef short int16_t;
+
+typedef unsigned char uint8_t;
+
+typedef signed char int8_t;
+
+#endif /* _STDINT_H */
+
+#endif /* VL6180x_TYPES_H_ */