Revision 0:1a92e4a37697, committed 2017-11-23

Comitter:

Ghiri

Date:

Thu Nov 23 14:20:48 2017 +0000

Child:

1:26bcd89c18e5

Commit message:

Publication Test

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Nov 23 14:20:48 2017 +0000
@@ -0,0 +1,169 @@
+//##############################################################
+//##
+//## Event: RoboVal - Robot Race
+//##
+//## Chronometer double use
+//##
+//## Version 1.99A
+//##
+//## Hardware platform used: ST NUCLEO-F401RE
+//##
+//## Software IDE used: mbed online version
+//##
+//## Organizzation: Verona FabLab
+//##
+//## Date creation: 2018.01.01
+//##
+//## Software developpers: FdF,GV, AG
+//##
+//## Base on original version of by FdF
+//##
+//##############################################################
+
+#include <stdlib.h>
+ 
+#include "mbed.h"
+#include "TextLCD.h"
+ 
+ 
+// Default Number Lap
+#define NUM_LAP 3
+
+// Reference for Low/Min Voltage battery
+#define VBAT_MIN 7.2
+ 
+ 
+typedef struct time_screen {
+   int cents;
+   int seconds;
+   int minutes;
+} measured_time;
+ 
+
+ // read Voltage battery
+DigitalOut heartbeat(LED1);
+
+// read Voltage battery, analog pin used PC_3 (Pin 37 of Morpho layout)
+AnalogIn vbat(PC_3);
+ 
+// User button pressure 
+InterruptIn user_button(USER_BUTTON); 
+
+// Sensor connected to digital input D9, alias PC7 on Morpho layout
+InterruptIn proximity(D9); 
+ 
+Timer t;
+
+// LCD Display (RS, E, D4, D5, D6, D7);
+TextLCD lcd(D2,D3,D4,D5,D6,D7); 
+ 
+int lap = 0;
+int last_read = 0;
+int lap_time = 0;
+ 
+ 
+// Conversion from millisecond to mm:ss:cc data format
+measured_time human_read(int ms){
+    measured_time read;
+    div_t qr = div(ms,1000);
+    
+    read.cents = qr.rem % 100;
+    
+    qr = div(qr.quot,60);
+    read.seconds = qr.rem;
+    
+    qr = div(qr.quot,60);
+    read.minutes = qr.rem;
+    
+    return read;    
+}
+ 
+// Function to measure time elapsed 
+void measure_time(){
+    int read = t.read_ms();
+    
+    if(lap == 0){
+        t.start();
+        lap++;
+    }else{
+        //Dabouncing per evitare problemi
+        if(read - last_read > 1000){
+            
+            lap_time = read - last_read;
+            
+            if(lap >= NUM_LAP){
+                t.stop();
+                lap++;
+            }else{
+                lap++;
+            }
+            
+            last_read = read;     
+        }
+    }
+    
+}
+
+// Function to reset measure done
+void reset_measure(){
+    t.stop();
+    t.reset();
+    lap = 0;
+    last_read = 0;
+    lcd.cls();
+}
+ 
+ 
+ 
+//------------------------------------------------------------ 
+//
+//       Main body
+//
+//------------------------------------------------------------
+ 
+int main() {
+    
+    proximity.mode(PullDown);
+    proximity.rise(&measure_time);    
+    user_button.fall(&reset_measure);
+    
+  
+   
+    
+    while(true) {
+        int read = t.read_ms(); 
+       
+        measured_time time = human_read(read);
+        
+        lcd.locate(0,0);
+        lcd.printf("Totale %02d:%02d:%02d",time.minutes,time.seconds,time.cents);
+       
+        //Gestione dei parziali
+        if(lap > 1){
+            time = human_read(lap_time);
+            lcd.locate(0,1);
+            lcd.printf("Giro %d %02d:%02d:%02d",lap - 1,time.minutes,time.seconds,time.cents);
+        }
+        
+        heartbeat = !heartbeat;
+        
+        
+        if(lap > 0 && lap <= NUM_LAP){
+            wait(0.1);
+        }else{
+            if(lap == 0){
+                //Controllo batteria con partitore resistivo
+                double battery =  ((3.3L * vbat) * 57) / 10;
+                if(battery < VBAT_MIN){
+                    lcd.locate(0,1);
+                    lcd.printf("LOW BAT %2.1f",battery);
+                }else{
+                    lcd.locate(0,1);
+                    lcd.printf("OK  BAT %2.1f",battery);
+                }
+            }
+            wait(1);
+        }
+    }
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Thu Nov 23 14:20:48 2017 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/mbed_official/code/mbed/builds/e7ca05fa8600
\ No newline at end of file