Jasper Gerth / Mbed 2 deprecated includeair

The final program for the #include AIR robot

Dependencies:   Biquad HIDScope QEI angleandposition controlandadjust mbed

Fork of includeair by BioRobotics

Revisions of main.cpp

Revision Date Message Actions
19:6f22b5687587 2015-10-20 shooting working; File  Diff  Annotate
18:1c3254a32fd1 2015-10-19 works now with calculated angles. only the shooting has to be calculated; File  Diff  Annotate
17:72d3522165ac 2015-10-19 buttoncontrol mode now working at rigth speed; File  Diff  Annotate
16:63320b8f79c2 2015-10-19 added buttoncontrolmode, but desiredpositoin moves too much per second; File  Diff  Annotate
15:17de575b7385 2015-10-19 added buttoncontrolmode and ledinfo green for normal running mode, blinking green for buttoncontrol mode, blinking blue for shooting, red with corresponding leds on top for calibration mode File  Diff  Annotate
14:4c4f45a1dd23 2015-10-19 added led info green led is normal mode, blinking blue led is shooting, red led and corresponding blinking led on top is calibration mode File  Diff  Annotate
13:47b065aadae9 2015-10-19 x movement in stead of y movement; File  Diff  Annotate
12:b9f0b92bd659 2015-10-19 added filtered signal to HIDScope; File  Diff  Annotate
11:c10651055871 2015-10-19 controllable with emg signals File  Diff  Annotate
10:9e96d14d7034 2015-10-14 Added stop when switching modes; File  Diff  Annotate
9:4ee354663560 2015-10-14 calibration now working!; File  Diff  Annotate
8:54a7da09ccad 2015-10-14 added calibration for left arm, now right arm and emg control File  Diff  Annotate
7:7fbb2c028778 2015-10-14 added control for calibration, now read out buttons; File  Diff  Annotate
6:37c94a5e205f 2015-10-14 Added switch 3 to change to calibration mode (using the buttons to set arms to 0 degrees; File  Diff  Annotate
5:8ac5d0651e4d 2015-10-14 valuechange working make sure you specify the format correct when using scanf (floats and doubles are different); File  Diff  Annotate
4:bf7765b0f612 2015-10-13 now led blinks on both emg signals; ; File  Diff  Annotate
3:48438eea184e 2015-10-13 now with threshold working. when threshold is crossed, led lights up; File  Diff  Annotate
2:c7707856d137 2015-10-13 Added option to adjust the gain of the filtered signal via Serial, called with sw2 File  Diff  Annotate
1:917c07a4f3ec 2015-10-12 Added the biquad filter; File  Diff  Annotate
0:dd66fff537d7 2015-10-09 start of the final program; File  Diff  Annotate