BLE_API - fka mod

Users » FrancisDrake » Code » BLE_API

fka mod

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@854:ad4ae73c2b5a, 2015-11-02 (annotated)

Committer:: rgrover1
Date:: Mon Nov 02 09:09:06 2015 +0000
Revision:: 854:ad4ae73c2b5a
Parent:: 853:2e829bcda785
Child:: 855:98b96c377015

Synchronized with git rev 918af4fb

Author: Rohit Grover

Major change:

- There's a new type: BLE::InitializationCompleteCallback_t

- init() now takes a completion callback. This is an optional parameter, if no callback is setup the application can still determine the status of initialization using BLE::hasInitialized() (see below).

- There's a new API: BLEInstanceBase::hasInitialized() which transports need to implement.

- BLEInstanceBase.h is no longer included from BLE.h. We use a forward declaration of BLEInstanceBase instead. This is required us to move implementations of BLE methods out of the header and into BLE.cpp.

- There's a new API:  BLE::getInstanceID(), which simply returns the ID of an instance.

- There are new error types around initialization.

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	716:11b41f651697	1	/* mbed Microcontroller Library
rgrover1	716:11b41f651697	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	716:11b41f651697	3	*
rgrover1	716:11b41f651697	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	716:11b41f651697	5	* you may not use this file except in compliance with the License.
rgrover1	716:11b41f651697	6	* You may obtain a copy of the License at
rgrover1	716:11b41f651697	7	*
rgrover1	716:11b41f651697	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	716:11b41f651697	9	*
rgrover1	716:11b41f651697	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	716:11b41f651697	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	716:11b41f651697	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	716:11b41f651697	13	* See the License for the specific language governing permissions and
rgrover1	716:11b41f651697	14	* limitations under the License.
rgrover1	716:11b41f651697	15	*/
rgrover1	716:11b41f651697	16
rgrover1	716:11b41f651697	17	#ifndef __BLE_H__
rgrover1	716:11b41f651697	18	#define __BLE_H__
rgrover1	716:11b41f651697	19
rgrover1	716:11b41f651697	20	#include "blecommon.h"
rgrover1	716:11b41f651697	21	#include "Gap.h"
rgrover1	716:11b41f651697	22	#include "GattServer.h"
rgrover1	716:11b41f651697	23	#include "GattClient.h"
rgrover1	716:11b41f651697	24
rgrover1	853:2e829bcda785	25	#ifdef YOTTA_CFG_MBED_OS
rgrover1	853:2e829bcda785	26	#include "mbed-drivers/mbed_error.h"
rgrover1	853:2e829bcda785	27	#else
rgrover1	818:61c62a287194	28	#include "mbed_error.h"
rgrover1	853:2e829bcda785	29	#endif
rgrover1	818:61c62a287194	30
rgrover1	854:ad4ae73c2b5a	31	/* forward declaration for the implementation class */
rgrover1	854:ad4ae73c2b5a	32	class BLEInstanceBase;
rgrover1	854:ad4ae73c2b5a	33
rgrover1	716:11b41f651697	34	/**
rgrover1	716:11b41f651697	35	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	716:11b41f651697	36	* to enable this BLE API to work with any radio transparently.
rgrover1	716:11b41f651697	37	*/
rgrover1	716:11b41f651697	38	class BLE
rgrover1	716:11b41f651697	39	{
rgrover1	716:11b41f651697	40	public:
rgrover1	854:ad4ae73c2b5a	41	typedef unsigned InstanceID_t;
rgrover1	854:ad4ae73c2b5a	42	typedef void (*InitializationCompleteCallback_t)(BLE &bleInstance);
rgrover1	854:ad4ae73c2b5a	43
rgrover1	716:11b41f651697	44	/**
rgrover1	716:11b41f651697	45	* Initialize the BLE controller. This should be called before using
rgrover1	716:11b41f651697	46	* anything else in the BLE_API.
rgrover1	716:11b41f651697	47	*
rgrover1	716:11b41f651697	48	* init() hands control to the underlying BLE module to accomplish
rgrover1	716:11b41f651697	49	* initialization. This initialization may tacitly depend on other hardware
rgrover1	716:11b41f651697	50	* setup (such as clocks or power-modes) which happens early on during
rgrover1	716:11b41f651697	51	* system startup. It may not be safe to call init() from global static
rgrover1	716:11b41f651697	52	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	716:11b41f651697	53	* is safe to call BLE::init() from within main().
rgrover1	854:ad4ae73c2b5a	54	*
rgrover1	854:ad4ae73c2b5a	55	* @param callback
rgrover1	854:ad4ae73c2b5a	56	* A callback for when initialization completes for a BLE
rgrover1	854:ad4ae73c2b5a	57	* instance. This is an optional parameter, if no callback is
rgrover1	854:ad4ae73c2b5a	58	* setup the application can still determine the status of
rgrover1	854:ad4ae73c2b5a	59	* initialization using BLE::hasInitialized() (see below).
rgrover1	854:ad4ae73c2b5a	60	*
rgrover1	854:ad4ae73c2b5a	61	* @return BLE_ERROR_NONE if the initialization procedure was started
rgrover1	854:ad4ae73c2b5a	62	* successfully.
rgrover1	854:ad4ae73c2b5a	63	*
rgrover1	854:ad4ae73c2b5a	64	* @note Nearly all BLE APIs would return
rgrover1	854:ad4ae73c2b5a	65	* BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
rgrover1	854:ad4ae73c2b5a	66	* corresponding transport is initialized.
rgrover1	716:11b41f651697	67	*/
rgrover1	854:ad4ae73c2b5a	68	ble_error_t init(InitializationCompleteCallback_t callback = NULL);
rgrover1	854:ad4ae73c2b5a	69
rgrover1	854:ad4ae73c2b5a	70	/**
rgrover1	854:ad4ae73c2b5a	71	* @return true if initialization has completed for the underlying BLE
rgrover1	854:ad4ae73c2b5a	72	* transport.
rgrover1	854:ad4ae73c2b5a	73	*
rgrover1	854:ad4ae73c2b5a	74	* The application can setup a callback to signal completion of
rgrover1	854:ad4ae73c2b5a	75	* initialization when using init(). Otherwise, this method can be used to
rgrover1	854:ad4ae73c2b5a	76	* poll the state of initialization.
rgrover1	854:ad4ae73c2b5a	77	*/
rgrover1	854:ad4ae73c2b5a	78	bool hasInitialized(void) const;
rgrover1	716:11b41f651697	79
rgrover1	716:11b41f651697	80	/**
rgrover1	716:11b41f651697	81	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	716:11b41f651697	82	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	716:11b41f651697	83	* repopulate the GATT database with new services and characteristics.
rgrover1	716:11b41f651697	84	*/
rgrover1	854:ad4ae73c2b5a	85	ble_error_t shutdown(void);
rgrover1	716:11b41f651697	86
rgrover1	716:11b41f651697	87	/**
rgrover1	716:11b41f651697	88	* This call allows the application to get the BLE stack version information.
rgrover1	716:11b41f651697	89	*
rgrover1	716:11b41f651697	90	* @return A pointer to a const string representing the version.
rgrover1	716:11b41f651697	91	* Note: The string is owned by the BLE_API.
rgrover1	716:11b41f651697	92	*/
rgrover1	854:ad4ae73c2b5a	93	const char *getVersion(void);
rgrover1	716:11b41f651697	94
rgrover1	716:11b41f651697	95	/*
rgrover1	716:11b41f651697	96	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	716:11b41f651697	97	* going through this accessor.
rgrover1	716:11b41f651697	98	*/
rgrover1	854:ad4ae73c2b5a	99	const Gap &gap() const;
rgrover1	854:ad4ae73c2b5a	100	Gap &gap();
rgrover1	716:11b41f651697	101
rgrover1	716:11b41f651697	102	/*
rgrover1	716:11b41f651697	103	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1	716:11b41f651697	104	* functionality requires going through this accessor.
rgrover1	716:11b41f651697	105	*/
rgrover1	854:ad4ae73c2b5a	106	const GattServer& gattServer() const;
rgrover1	854:ad4ae73c2b5a	107	GattServer& gattServer();
rgrover1	716:11b41f651697	108
rgrover1	716:11b41f651697	109	/*
rgrover1	716:11b41f651697	110	* Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1	716:11b41f651697	111	* functionality requires going through this accessor.
rgrover1	716:11b41f651697	112	*/
rgrover1	854:ad4ae73c2b5a	113	const GattClient& gattClient() const;
rgrover1	854:ad4ae73c2b5a	114	GattClient& gattClient();
rgrover1	716:11b41f651697	115
rgrover1	716:11b41f651697	116	/*
rgrover1	716:11b41f651697	117	* Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1	716:11b41f651697	118	* SecurityManager related functionality requires going through this
rgrover1	716:11b41f651697	119	* accessor.
rgrover1	716:11b41f651697	120	*/
rgrover1	854:ad4ae73c2b5a	121	const SecurityManager& securityManager() const;
rgrover1	854:ad4ae73c2b5a	122	SecurityManager& securityManager();
rgrover1	716:11b41f651697	123
rgrover1	716:11b41f651697	124	/**
rgrover1	716:11b41f651697	125	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	716:11b41f651697	126	* is a sleep function which will return when there is an application
rgrover1	716:11b41f651697	127	* specific interrupt, but the MCU might wake up several times before
rgrover1	716:11b41f651697	128	* returning (to service the stack). This is not always interchangeable with
rgrover1	716:11b41f651697	129	* WFE().
rgrover1	716:11b41f651697	130	*/
rgrover1	854:ad4ae73c2b5a	131	void waitForEvent(void);
rgrover1	716:11b41f651697	132
rgrover1	822:a0f080d1e836	133	public:
rgrover1	822:a0f080d1e836	134	static const InstanceID_t DEFAULT_INSTANCE = 0;
rgrover1	822:a0f080d1e836	135	#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
rgrover1	822:a0f080d1e836	136	static const InstanceID_t NUM_INSTANCES = 1;
rgrover1	822:a0f080d1e836	137	#else
rgrover1	822:a0f080d1e836	138	static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
rgrover1	822:a0f080d1e836	139	#endif
rgrover1	822:a0f080d1e836	140
rgrover1	822:a0f080d1e836	141	/**
rgrover1	822:a0f080d1e836	142	* Get a reference to the BLE singleton corresponding to a given interface.
rgrover1	822:a0f080d1e836	143	* There is a static array of BLE singletons.
rgrover1	822:a0f080d1e836	144	*
rgrover1	822:a0f080d1e836	145	* @Note: Calling Instance() is preferred over constructing a BLE object
rgrover1	822:a0f080d1e836	146	* directly, as it returns references to singletons.
rgrover1	822:a0f080d1e836	147	*
rgrover1	822:a0f080d1e836	148	* @param[in] id
rgrover1	822:a0f080d1e836	149	* Instance-ID. This should be less than NUM_INSTANCES in order
rgrover1	822:a0f080d1e836	150	* for the returned BLE singleton to be useful.
rgrover1	822:a0f080d1e836	151	*
rgrover1	822:a0f080d1e836	152	* @return a reference to a single object
rgrover1	822:a0f080d1e836	153	*/
rgrover1	822:a0f080d1e836	154	static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
rgrover1	822:a0f080d1e836	155
rgrover1	822:a0f080d1e836	156	/**
rgrover1	822:a0f080d1e836	157	* Constructor for a handle to a BLE instance (i.e. BLE stack). BLE handles
rgrover1	822:a0f080d1e836	158	* are thin wrappers around a transport object (i.e. ptr. to
rgrover1	822:a0f080d1e836	159	* BLEInstanceBase).
rgrover1	822:a0f080d1e836	160	*
rgrover1	822:a0f080d1e836	161	* BLE objects are are better created as singletons accessed through the
rgrover1	822:a0f080d1e836	162	* Instance() method. If multiple BLE handles are constructed for the same
rgrover1	822:a0f080d1e836	163	* interface (using this constructor), they will share the same underlying
rgrover1	822:a0f080d1e836	164	* transport object.
rgrover1	822:a0f080d1e836	165	*/
rgrover1	822:a0f080d1e836	166	BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
rgrover1	822:a0f080d1e836	167
rgrover1	854:ad4ae73c2b5a	168	/**
rgrover1	854:ad4ae73c2b5a	169	* Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
rgrover1	854:ad4ae73c2b5a	170	*/
rgrover1	854:ad4ae73c2b5a	171	InstanceID_t getInstanceID(void) const {
rgrover1	854:ad4ae73c2b5a	172	return instanceID;
rgrover1	854:ad4ae73c2b5a	173	}
rgrover1	822:a0f080d1e836	174
rgrover1	716:11b41f651697	175	/*
rgrover1	716:11b41f651697	176	* Deprecation alert!
rgrover1	716:11b41f651697	177	* All of the following are deprecated and may be dropped in a future
rgrover1	716:11b41f651697	178	* release. Documentation should refer to alternative APIs.
rgrover1	716:11b41f651697	179	*/
rgrover1	716:11b41f651697	180
rgrover1	716:11b41f651697	181	/* GAP specific APIs. */
rgrover1	716:11b41f651697	182	public:
rgrover1	716:11b41f651697	183	/**
rgrover1	716:11b41f651697	184	* Set the BTLE MAC address and type.
rgrover1	716:11b41f651697	185	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	186	*
rgrover1	716:11b41f651697	187	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	188	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	189	* ble.setAddress(...) should be replaced with
rgrover1	716:11b41f651697	190	* ble.gap().setAddress(...).
rgrover1	716:11b41f651697	191	*/
rgrover1	716:11b41f651697	192	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	716:11b41f651697	193	return gap().setAddress(type, address);
rgrover1	716:11b41f651697	194	}
rgrover1	716:11b41f651697	195
rgrover1	716:11b41f651697	196	/**
rgrover1	716:11b41f651697	197	* Fetch the BTLE MAC address and type.
rgrover1	716:11b41f651697	198	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	199	*
rgrover1	716:11b41f651697	200	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	201	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	202	* ble.getAddress(...) should be replaced with
rgrover1	716:11b41f651697	203	* ble.gap().getAddress(...).
rgrover1	716:11b41f651697	204	*/
rgrover1	716:11b41f651697	205	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	716:11b41f651697	206	return gap().getAddress(typeP, address);
rgrover1	716:11b41f651697	207	}
rgrover1	716:11b41f651697	208
rgrover1	716:11b41f651697	209	/**
rgrover1	716:11b41f651697	210	* Set the GAP advertising mode to use for this device.
rgrover1	716:11b41f651697	211	*
rgrover1	716:11b41f651697	212	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	213	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	214	* ble.setAdvertisingType(...) should be replaced with
rgrover1	716:11b41f651697	215	* ble.gap().setAdvertisingType(...).
rgrover1	716:11b41f651697	216	*/
rgrover1	716:11b41f651697	217	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	716:11b41f651697	218	gap().setAdvertisingType(advType);
rgrover1	716:11b41f651697	219	}
rgrover1	716:11b41f651697	220
rgrover1	716:11b41f651697	221	/**
rgrover1	716:11b41f651697	222	* @param[in] interval
rgrover1	716:11b41f651697	223	* Advertising interval in units of milliseconds. Advertising
rgrover1	716:11b41f651697	224	* is disabled if interval is 0. If interval is smaller than
rgrover1	716:11b41f651697	225	* the minimum supported value, then the minimum supported
rgrover1	716:11b41f651697	226	* value is used instead. This minimum value can be discovered
rgrover1	716:11b41f651697	227	* using getMinAdvertisingInterval().
rgrover1	716:11b41f651697	228	*
rgrover1	716:11b41f651697	229	* This field must be set to 0 if connectionMode is equal
rgrover1	716:11b41f651697	230	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	716:11b41f651697	231	*
rgrover1	716:11b41f651697	232	* @note: Decreasing this value will allow central devices to detect a
rgrover1	716:11b41f651697	233	* peripheral faster at the expense of more power being used by the radio
rgrover1	716:11b41f651697	234	* due to the higher data transmit rate.
rgrover1	716:11b41f651697	235	*
rgrover1	716:11b41f651697	236	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	237	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	238	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	239	* ble.gap().setAdvertisingInterval(...).
rgrover1	716:11b41f651697	240	*
rgrover1	716:11b41f651697	241	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	716:11b41f651697	242	* 'interval' argument. That required an explicit conversion from
rgrover1	716:11b41f651697	243	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	716:11b41f651697	244	* no longer required as the new units are milliseconds. Any application
rgrover1	716:11b41f651697	245	* code depending on the old semantics would need to be updated accordingly.
rgrover1	716:11b41f651697	246	*/
rgrover1	716:11b41f651697	247	void setAdvertisingInterval(uint16_t interval) {
rgrover1	716:11b41f651697	248	gap().setAdvertisingInterval(interval);
rgrover1	716:11b41f651697	249	}
rgrover1	716:11b41f651697	250
rgrover1	716:11b41f651697	251	/**
rgrover1	716:11b41f651697	252	* @return Minimum Advertising interval in milliseconds.
rgrover1	716:11b41f651697	253	*
rgrover1	716:11b41f651697	254	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	255	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	256	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	257	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	716:11b41f651697	258	*/
rgrover1	716:11b41f651697	259	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	260	return gap().getMinAdvertisingInterval();
rgrover1	716:11b41f651697	261	}
rgrover1	716:11b41f651697	262
rgrover1	716:11b41f651697	263	/**
rgrover1	716:11b41f651697	264	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	716:11b41f651697	265	*
rgrover1	716:11b41f651697	266	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	267	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	268	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	269	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	716:11b41f651697	270	*/
rgrover1	716:11b41f651697	271	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	272	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	716:11b41f651697	273	}
rgrover1	716:11b41f651697	274
rgrover1	716:11b41f651697	275	/**
rgrover1	716:11b41f651697	276	* @return Maximum Advertising interval in milliseconds.
rgrover1	716:11b41f651697	277	*
rgrover1	716:11b41f651697	278	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	279	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	280	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	281	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	716:11b41f651697	282	*/
rgrover1	716:11b41f651697	283	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	284	return gap().getMaxAdvertisingInterval();
rgrover1	716:11b41f651697	285	}
rgrover1	716:11b41f651697	286
rgrover1	716:11b41f651697	287	/**
rgrover1	716:11b41f651697	288	* @param[in] timeout
rgrover1	716:11b41f651697	289	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	716:11b41f651697	290	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	716:11b41f651697	291	*
rgrover1	716:11b41f651697	292	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	293	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	294	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	716:11b41f651697	295	* ble.gap().setAdvertisingTimeout(...).
rgrover1	716:11b41f651697	296	*/
rgrover1	716:11b41f651697	297	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	716:11b41f651697	298	gap().setAdvertisingTimeout(timeout);
rgrover1	716:11b41f651697	299	}
rgrover1	716:11b41f651697	300
rgrover1	716:11b41f651697	301	/**
rgrover1	716:11b41f651697	302	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	716:11b41f651697	303	* the underlying stack. It would be uncommon for this API to be used
rgrover1	716:11b41f651697	304	* directly; there are other APIs to tweak advertisement parameters
rgrover1	716:11b41f651697	305	* individually (see above).
rgrover1	716:11b41f651697	306	*
rgrover1	716:11b41f651697	307	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	308	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	309	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	716:11b41f651697	310	* ble.gap().setAdvertisingParams(...).
rgrover1	716:11b41f651697	311	*/
rgrover1	716:11b41f651697	312	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	716:11b41f651697	313	gap().setAdvertisingParams(advParams);
rgrover1	716:11b41f651697	314	}
rgrover1	716:11b41f651697	315
rgrover1	716:11b41f651697	316	/**
rgrover1	716:11b41f651697	317	* @return Read back advertising parameters. Useful for storing and
rgrover1	716:11b41f651697	318	* restoring parameters rapidly.
rgrover1	716:11b41f651697	319	*
rgrover1	716:11b41f651697	320	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	321	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	322	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	716:11b41f651697	323	* ble.gap().getAdvertisingParams(...).
rgrover1	716:11b41f651697	324	*/
rgrover1	716:11b41f651697	325	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	716:11b41f651697	326	return gap().getAdvertisingParams();
rgrover1	716:11b41f651697	327	}
rgrover1	716:11b41f651697	328
rgrover1	716:11b41f651697	329	/**
rgrover1	716:11b41f651697	330	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	331	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	332	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	333	* small.
rgrover1	716:11b41f651697	334	*
rgrover1	716:11b41f651697	335	* @param[in] flags
rgrover1	716:11b41f651697	336	* The flags to be added. Please refer to
rgrover1	716:11b41f651697	337	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	716:11b41f651697	338	* flags may be specified in combination.
rgrover1	716:11b41f651697	339	*
rgrover1	716:11b41f651697	340	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	341	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	342	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	716:11b41f651697	343	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	716:11b41f651697	344	*/
rgrover1	716:11b41f651697	345	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	716:11b41f651697	346	return gap().accumulateAdvertisingPayload(flags);
rgrover1	716:11b41f651697	347	}
rgrover1	716:11b41f651697	348
rgrover1	716:11b41f651697	349	/**
rgrover1	716:11b41f651697	350	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	351	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	352	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	353	* small.
rgrover1	716:11b41f651697	354	*
rgrover1	716:11b41f651697	355	* @param[in] app
rgrover1	716:11b41f651697	356	* The appearance of the peripheral.
rgrover1	716:11b41f651697	357	*
rgrover1	716:11b41f651697	358	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	359	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	360	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	716:11b41f651697	361	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	716:11b41f651697	362	*/
rgrover1	716:11b41f651697	363	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	716:11b41f651697	364	return gap().accumulateAdvertisingPayload(app);
rgrover1	716:11b41f651697	365	}
rgrover1	716:11b41f651697	366
rgrover1	716:11b41f651697	367	/**
rgrover1	716:11b41f651697	368	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	369	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	370	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	371	* small.
rgrover1	716:11b41f651697	372	*
rgrover1	716:11b41f651697	373	* @param[in] app
rgrover1	716:11b41f651697	374	* The max transmit power to be used by the controller. This
rgrover1	716:11b41f651697	375	* is only a hint.
rgrover1	716:11b41f651697	376	*
rgrover1	716:11b41f651697	377	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	378	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	379	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	716:11b41f651697	380	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	716:11b41f651697	381	*/
rgrover1	716:11b41f651697	382	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	716:11b41f651697	383	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	716:11b41f651697	384	}
rgrover1	716:11b41f651697	385
rgrover1	716:11b41f651697	386	/**
rgrover1	716:11b41f651697	387	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	716:11b41f651697	388	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	716:11b41f651697	389	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	716:11b41f651697	390	* advertising payload proves to be too small.
rgrover1	716:11b41f651697	391	*
rgrover1	716:11b41f651697	392	* @param type The type which describes the variable length data.
rgrover1	716:11b41f651697	393	* @param data data bytes.
rgrover1	716:11b41f651697	394	* @param len length of data.
rgrover1	716:11b41f651697	395	*
rgrover1	716:11b41f651697	396	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	397	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	398	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	716:11b41f651697	399	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	716:11b41f651697	400	*/
rgrover1	716:11b41f651697	401	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	716:11b41f651697	402	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	716:11b41f651697	403	}
rgrover1	716:11b41f651697	404
rgrover1	716:11b41f651697	405	/**
rgrover1	716:11b41f651697	406	* Setup a particular, user-constructed advertisement payload for the
rgrover1	716:11b41f651697	407	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	716:11b41f651697	408	* there are other APIs to build an advertisement payload (see above).
rgrover1	716:11b41f651697	409	*
rgrover1	716:11b41f651697	410	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	411	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	412	* ble.setAdvertisingData(...) should be replaced with
rgrover1	716:11b41f651697	413	* ble.gap().setAdvertisingPayload(...).
rgrover1	716:11b41f651697	414	*/
rgrover1	716:11b41f651697	415	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	716:11b41f651697	416	return gap().setAdvertisingPayload(advData);
rgrover1	716:11b41f651697	417	}
rgrover1	716:11b41f651697	418
rgrover1	716:11b41f651697	419	/**
rgrover1	716:11b41f651697	420	* @return Read back advertising data. Useful for storing and
rgrover1	716:11b41f651697	421	* restoring payload.
rgrover1	716:11b41f651697	422	*
rgrover1	716:11b41f651697	423	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	424	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	425	* ble.getAdvertisingData(...) should be replaced with
rgrover1	716:11b41f651697	426	* ble.gap().getAdvertisingPayload()(...).
rgrover1	716:11b41f651697	427	*/
rgrover1	716:11b41f651697	428	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	716:11b41f651697	429	return gap().getAdvertisingPayload();
rgrover1	716:11b41f651697	430	}
rgrover1	716:11b41f651697	431
rgrover1	716:11b41f651697	432	/**
rgrover1	716:11b41f651697	433	* Reset any advertising payload prepared from prior calls to
rgrover1	716:11b41f651697	434	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	716:11b41f651697	435	* initialized adv payload to the underlying stack.
rgrover1	716:11b41f651697	436	*
rgrover1	716:11b41f651697	437	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	438	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	439	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	716:11b41f651697	440	* ble.gap().clearAdvertisingPayload(...).
rgrover1	716:11b41f651697	441	*/
rgrover1	716:11b41f651697	442	void clearAdvertisingPayload(void) {
rgrover1	716:11b41f651697	443	gap().clearAdvertisingPayload();
rgrover1	716:11b41f651697	444	}
rgrover1	716:11b41f651697	445
rgrover1	716:11b41f651697	446	/**
rgrover1	716:11b41f651697	447	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	716:11b41f651697	448	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	716:11b41f651697	449	* This API will be dropped in a future release.
rgrover1	716:11b41f651697	450	*
rgrover1	716:11b41f651697	451	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	716:11b41f651697	452	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	716:11b41f651697	453	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	716:11b41f651697	454	* API. Updates to the underlying advertisement payload now happen
rgrover1	716:11b41f651697	455	* implicitly.
rgrover1	716:11b41f651697	456	*/
rgrover1	716:11b41f651697	457	ble_error_t setAdvertisingPayload(void) {
rgrover1	716:11b41f651697	458	return BLE_ERROR_NONE;
rgrover1	716:11b41f651697	459	}
rgrover1	716:11b41f651697	460
rgrover1	716:11b41f651697	461	/**
rgrover1	716:11b41f651697	462	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	716:11b41f651697	463	* scanResponse payload.
rgrover1	716:11b41f651697	464	*
rgrover1	716:11b41f651697	465	* @param[in] type The type which describes the variable length data.
rgrover1	716:11b41f651697	466	* @param[in] data data bytes.
rgrover1	716:11b41f651697	467	* @param[in] len length of data.
rgrover1	716:11b41f651697	468	*
rgrover1	716:11b41f651697	469	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	470	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	471	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	716:11b41f651697	472	* ble.gap().accumulateScanResponse(...).
rgrover1	716:11b41f651697	473	*/
rgrover1	716:11b41f651697	474	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	716:11b41f651697	475	return gap().accumulateScanResponse(type, data, len);
rgrover1	716:11b41f651697	476	}
rgrover1	716:11b41f651697	477
rgrover1	716:11b41f651697	478	/**
rgrover1	716:11b41f651697	479	* Reset any scan response prepared from prior calls to
rgrover1	716:11b41f651697	480	* accumulateScanResponse().
rgrover1	716:11b41f651697	481	*
rgrover1	716:11b41f651697	482	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	483	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	484	* ble.clearScanResponse(...) should be replaced with
rgrover1	716:11b41f651697	485	* ble.gap().clearScanResponse(...).
rgrover1	716:11b41f651697	486	*/
rgrover1	716:11b41f651697	487	void clearScanResponse(void) {
rgrover1	716:11b41f651697	488	gap().clearScanResponse();
rgrover1	716:11b41f651697	489	}
rgrover1	716:11b41f651697	490
rgrover1	716:11b41f651697	491	/**
rgrover1	716:11b41f651697	492	* Start advertising.
rgrover1	716:11b41f651697	493	*
rgrover1	716:11b41f651697	494	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	495	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	496	* ble.startAdvertising(...) should be replaced with
rgrover1	716:11b41f651697	497	* ble.gap().startAdvertising(...).
rgrover1	716:11b41f651697	498	*/
rgrover1	716:11b41f651697	499	ble_error_t startAdvertising(void) {
rgrover1	716:11b41f651697	500	return gap().startAdvertising();
rgrover1	716:11b41f651697	501	}
rgrover1	716:11b41f651697	502
rgrover1	716:11b41f651697	503	/**
rgrover1	716:11b41f651697	504	* Stop advertising.
rgrover1	716:11b41f651697	505	*
rgrover1	716:11b41f651697	506	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	507	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	508	* ble.stopAdvertising(...) should be replaced with
rgrover1	716:11b41f651697	509	* ble.gap().stopAdvertising(...).
rgrover1	716:11b41f651697	510	*/
rgrover1	716:11b41f651697	511	ble_error_t stopAdvertising(void) {
rgrover1	716:11b41f651697	512	return gap().stopAdvertising();
rgrover1	716:11b41f651697	513	}
rgrover1	716:11b41f651697	514
rgrover1	716:11b41f651697	515	/**
rgrover1	716:11b41f651697	516	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	517	* @param[in] interval
rgrover1	716:11b41f651697	518	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	519	* @param[in] window
rgrover1	716:11b41f651697	520	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	521	* @param[in] timeout
rgrover1	716:11b41f651697	522	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	716:11b41f651697	523	* @param[in] activeScanning
rgrover1	716:11b41f651697	524	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	716:11b41f651697	525	* scan response from a peer if possible.
rgrover1	716:11b41f651697	526	*
rgrover1	716:11b41f651697	527	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	528	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	529	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	530	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	531	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	532	* interval.
rgrover1	716:11b41f651697	533	*
rgrover1	716:11b41f651697	534	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	535	* enabled by using startScan().
rgrover1	716:11b41f651697	536	*
rgrover1	716:11b41f651697	537	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	716:11b41f651697	538	*
rgrover1	716:11b41f651697	539	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	540	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	541	* ble.setScanParams(...) should be replaced with
rgrover1	716:11b41f651697	542	* ble.gap().setScanParams(...).
rgrover1	716:11b41f651697	543	*/
rgrover1	716:11b41f651697	544	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	716:11b41f651697	545	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	716:11b41f651697	546	uint16_t timeout = 0,
rgrover1	716:11b41f651697	547	bool activeScanning = false) {
rgrover1	716:11b41f651697	548	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	716:11b41f651697	549	}
rgrover1	716:11b41f651697	550
rgrover1	716:11b41f651697	551	/**
rgrover1	716:11b41f651697	552	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	553	* @param[in] interval
rgrover1	716:11b41f651697	554	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	555	*
rgrover1	716:11b41f651697	556	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	557	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	558	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	559	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	560	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	561	* interval.
rgrover1	716:11b41f651697	562	*
rgrover1	716:11b41f651697	563	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	564	* enabled by using startScan().
rgrover1	716:11b41f651697	565	*
rgrover1	716:11b41f651697	566	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	567	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	568	* ble.setScanInterval(interval) should be replaced with
rgrover1	716:11b41f651697	569	* ble.gap().setScanInterval(interval).
rgrover1	716:11b41f651697	570	*/
rgrover1	716:11b41f651697	571	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	716:11b41f651697	572	return gap().setScanInterval(interval);
rgrover1	716:11b41f651697	573	}
rgrover1	716:11b41f651697	574
rgrover1	716:11b41f651697	575	/**
rgrover1	716:11b41f651697	576	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	577	* @param[in] window
rgrover1	716:11b41f651697	578	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	579	*
rgrover1	716:11b41f651697	580	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	581	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	582	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	583	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	584	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	585	* interval.
rgrover1	716:11b41f651697	586	*
rgrover1	716:11b41f651697	587	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	588	* enabled by using startScan().
rgrover1	716:11b41f651697	589	*
rgrover1	716:11b41f651697	590	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	591	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	592	* ble.setScanWindow(window) should be replaced with
rgrover1	716:11b41f651697	593	* ble.gap().setScanWindow(window).
rgrover1	716:11b41f651697	594	*/
rgrover1	716:11b41f651697	595	ble_error_t setScanWindow(uint16_t window) {
rgrover1	716:11b41f651697	596	return gap().setScanWindow(window);
rgrover1	716:11b41f651697	597	}
rgrover1	716:11b41f651697	598
rgrover1	716:11b41f651697	599	/**
rgrover1	716:11b41f651697	600	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	601	* @param[in] timeout
rgrover1	716:11b41f651697	602	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	716:11b41f651697	603	*
rgrover1	716:11b41f651697	604	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	605	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	606	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	607	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	608	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	609	* interval.
rgrover1	716:11b41f651697	610	*
rgrover1	716:11b41f651697	611	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	612	* enabled by using startScan().
rgrover1	716:11b41f651697	613	*
rgrover1	716:11b41f651697	614	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	716:11b41f651697	615	*
rgrover1	716:11b41f651697	616	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	617	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	618	* ble.setScanTimeout(...) should be replaced with
rgrover1	716:11b41f651697	619	* ble.gap().setScanTimeout(...).
rgrover1	716:11b41f651697	620	*/
rgrover1	716:11b41f651697	621	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	716:11b41f651697	622	return gap().setScanTimeout(timeout);
rgrover1	716:11b41f651697	623	}
rgrover1	716:11b41f651697	624
rgrover1	716:11b41f651697	625	/**
rgrover1	716:11b41f651697	626	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	627	* @param[in] activeScanning
rgrover1	716:11b41f651697	628	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	716:11b41f651697	629	* scan response from a peer if possible.
rgrover1	716:11b41f651697	630	*
rgrover1	716:11b41f651697	631	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	632	* enabled by using startScan().
rgrover1	716:11b41f651697	633	*
rgrover1	716:11b41f651697	634	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	635	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	636	* ble.setActiveScan(...) should be replaced with
rgrover1	716:11b41f651697	637	* ble.gap().setActiveScanning(...).
rgrover1	716:11b41f651697	638	*/
rgrover1	716:11b41f651697	639	void setActiveScan(bool activeScanning) {
rgrover1	716:11b41f651697	640	gap().setActiveScanning(activeScanning);
rgrover1	716:11b41f651697	641	}
rgrover1	716:11b41f651697	642
rgrover1	716:11b41f651697	643	/**
rgrover1	716:11b41f651697	644	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	716:11b41f651697	645	* effect.
rgrover1	716:11b41f651697	646	*
rgrover1	716:11b41f651697	647	* @param[in] callback
rgrover1	716:11b41f651697	648	* The application specific callback to be invoked upon
rgrover1	716:11b41f651697	649	* receiving every advertisement report. This can be passed in
rgrover1	716:11b41f651697	650	* as NULL, in which case scanning may not be enabled at all.
rgrover1	716:11b41f651697	651	*
rgrover1	716:11b41f651697	652	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	653	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	654	* ble.startScan(callback) should be replaced with
rgrover1	716:11b41f651697	655	* ble.gap().startScan(callback).
rgrover1	716:11b41f651697	656	*/
rgrover1	716:11b41f651697	657	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	716:11b41f651697	658	return gap().startScan(callback);
rgrover1	716:11b41f651697	659	}
rgrover1	716:11b41f651697	660
rgrover1	716:11b41f651697	661	/**
rgrover1	716:11b41f651697	662	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	716:11b41f651697	663	*
rgrover1	716:11b41f651697	664	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	665	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	666	* ble.startScan(callback) should be replaced with
rgrover1	716:11b41f651697	667	* ble.gap().startScan(object, callback).
rgrover1	716:11b41f651697	668	*/
rgrover1	716:11b41f651697	669	template<typename T>
rgrover1	716:11b41f651697	670	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	716:11b41f651697	671
rgrover1	716:11b41f651697	672	/**
rgrover1	716:11b41f651697	673	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	716:11b41f651697	674	*
rgrover1	716:11b41f651697	675	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	716:11b41f651697	676	*
rgrover1	716:11b41f651697	677	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	678	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	679	* ble.stopScan() should be replaced with
rgrover1	716:11b41f651697	680	* ble.gap().stopScan().
rgrover1	716:11b41f651697	681	*/
rgrover1	716:11b41f651697	682	ble_error_t stopScan(void) {
rgrover1	716:11b41f651697	683	return gap().stopScan();
rgrover1	716:11b41f651697	684	}
rgrover1	716:11b41f651697	685
rgrover1	716:11b41f651697	686	/**
rgrover1	716:11b41f651697	687	* Create a connection (GAP Link Establishment).
rgrover1	716:11b41f651697	688	* @param peerAddr
rgrover1	716:11b41f651697	689	* 48-bit address, LSB format.
rgrover1	716:11b41f651697	690	* @param peerAddrType
rgrover1	716:11b41f651697	691	* Address type of the peer.
rgrover1	716:11b41f651697	692	* @param connectionParams
rgrover1	716:11b41f651697	693	* Connection parameters.
rgrover1	716:11b41f651697	694	* @param scanParams
rgrover1	716:11b41f651697	695	* Paramters to be used while scanning for the peer.
rgrover1	716:11b41f651697	696	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	716:11b41f651697	697	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	716:11b41f651697	698	* a connection event.
rgrover1	716:11b41f651697	699	*
rgrover1	716:11b41f651697	700	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	701	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	702	* ble.connect(...) should be replaced with
rgrover1	716:11b41f651697	703	* ble.gap().connect(...).
rgrover1	716:11b41f651697	704	*/
rgrover1	716:11b41f651697	705	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	716:11b41f651697	706	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	716:11b41f651697	707	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	716:11b41f651697	708	const GapScanningParams *scanParams = NULL) {
rgrover1	716:11b41f651697	709	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	716:11b41f651697	710	}
rgrover1	716:11b41f651697	711
rgrover1	716:11b41f651697	712	/**
rgrover1	716:11b41f651697	713	* This call initiates the disconnection procedure, and its completion will
rgrover1	716:11b41f651697	714	* be communicated to the application with an invocation of the
rgrover1	716:11b41f651697	715	* onDisconnection callback.
rgrover1	716:11b41f651697	716	*
rgrover1	716:11b41f651697	717	* @param[in] connectionHandle
rgrover1	716:11b41f651697	718	* @param[in] reason
rgrover1	716:11b41f651697	719	* The reason for disconnection to be sent back to the peer.
rgrover1	716:11b41f651697	720	*/
rgrover1	716:11b41f651697	721	ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1	716:11b41f651697	722	return gap().disconnect(connectionHandle, reason);
rgrover1	716:11b41f651697	723	}
rgrover1	716:11b41f651697	724
rgrover1	716:11b41f651697	725	/**
rgrover1	716:11b41f651697	726	* This call initiates the disconnection procedure, and its completion will
rgrover1	716:11b41f651697	727	* be communicated to the application with an invocation of the
rgrover1	716:11b41f651697	728	* onDisconnection callback.
rgrover1	716:11b41f651697	729	*
rgrover1	716:11b41f651697	730	* @param reason
rgrover1	716:11b41f651697	731	* The reason for disconnection to be sent back to the peer.
rgrover1	716:11b41f651697	732	*
rgrover1	716:11b41f651697	733	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	734	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	735	* ble.disconnect(reason) should be replaced with
rgrover1	716:11b41f651697	736	* ble.gap().disconnect(reason).
rgrover1	716:11b41f651697	737	*
rgrover1	716:11b41f651697	738	* @note: this version of disconnect() doesn't take a connection handle. It
rgrover1	716:11b41f651697	739	* will work reliably only for stacks which are limited to a single
rgrover1	716:11b41f651697	740	* connection. This API should be considered deprecated in favour of the
rgrover1	716:11b41f651697	741	* alternative which takes a connection handle. It will be dropped in the future.
rgrover1	716:11b41f651697	742	*/
rgrover1	716:11b41f651697	743	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	716:11b41f651697	744	return gap().disconnect(reason);
rgrover1	716:11b41f651697	745	}
rgrover1	716:11b41f651697	746
rgrover1	716:11b41f651697	747	/**
rgrover1	716:11b41f651697	748	* Returns the current GAP state of the device using a bitmask which
rgrover1	716:11b41f651697	749	* describes whether the device is advertising and/or connected.
rgrover1	716:11b41f651697	750	*
rgrover1	716:11b41f651697	751	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	752	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	753	* ble.getGapState() should be replaced with
rgrover1	716:11b41f651697	754	* ble.gap().getState().
rgrover1	716:11b41f651697	755	*/
rgrover1	716:11b41f651697	756	Gap::GapState_t getGapState(void) const {
rgrover1	716:11b41f651697	757	return gap().getState();
rgrover1	716:11b41f651697	758	}
rgrover1	716:11b41f651697	759
rgrover1	716:11b41f651697	760	/**
rgrover1	716:11b41f651697	761	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	716:11b41f651697	762	* defaults that the peripheral would like to have in a connection. The
rgrover1	716:11b41f651697	763	* choice of the connection parameters is eventually up to the central.
rgrover1	716:11b41f651697	764	*
rgrover1	716:11b41f651697	765	* @param[out] params
rgrover1	716:11b41f651697	766	* The structure where the parameters will be stored. Memory
rgrover1	716:11b41f651697	767	* for this is owned by the caller.
rgrover1	716:11b41f651697	768	*
rgrover1	716:11b41f651697	769	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	716:11b41f651697	770	* the given structure pointed to by params.
rgrover1	716:11b41f651697	771	*
rgrover1	716:11b41f651697	772	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	773	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	774	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	716:11b41f651697	775	* ble.gap().getPreferredConnectionParams().
rgrover1	716:11b41f651697	776	*/
rgrover1	716:11b41f651697	777	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	778	return gap().getPreferredConnectionParams(params);
rgrover1	716:11b41f651697	779	}
rgrover1	716:11b41f651697	780
rgrover1	716:11b41f651697	781	/**
rgrover1	716:11b41f651697	782	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	716:11b41f651697	783	* defaults that the peripheral would like to have in a connection. The
rgrover1	716:11b41f651697	784	* choice of the connection parameters is eventually up to the central.
rgrover1	716:11b41f651697	785	*
rgrover1	716:11b41f651697	786	* @param[in] params
rgrover1	716:11b41f651697	787	* The structure containing the desired parameters.
rgrover1	716:11b41f651697	788	*
rgrover1	716:11b41f651697	789	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	790	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	791	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	716:11b41f651697	792	* ble.gap().setPreferredConnectionParams().
rgrover1	716:11b41f651697	793	*/
rgrover1	716:11b41f651697	794	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	795	return gap().setPreferredConnectionParams(params);
rgrover1	716:11b41f651697	796	}
rgrover1	716:11b41f651697	797
rgrover1	716:11b41f651697	798	/**
rgrover1	716:11b41f651697	799	* Update connection parameters while in the peripheral role.
rgrover1	716:11b41f651697	800	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	716:11b41f651697	801	* the central to perform the procedure.
rgrover1	716:11b41f651697	802	* @param[in] handle
rgrover1	716:11b41f651697	803	* Connection Handle
rgrover1	716:11b41f651697	804	* @param[in] params
rgrover1	716:11b41f651697	805	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	716:11b41f651697	806	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	716:11b41f651697	807	*
rgrover1	716:11b41f651697	808	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	809	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	810	* ble.updateConnectionParams() should be replaced with
rgrover1	716:11b41f651697	811	* ble.gap().updateConnectionParams().
rgrover1	716:11b41f651697	812	*/
rgrover1	716:11b41f651697	813	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	814	return gap().updateConnectionParams(handle, params);
rgrover1	716:11b41f651697	815	}
rgrover1	716:11b41f651697	816
rgrover1	716:11b41f651697	817	/**
rgrover1	716:11b41f651697	818	* Set the device name characteristic in the GAP service.
rgrover1	716:11b41f651697	819	* @param[in] deviceName
rgrover1	716:11b41f651697	820	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	716:11b41f651697	821	*
rgrover1	716:11b41f651697	822	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	823	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	824	* ble.setDeviceName() should be replaced with
rgrover1	716:11b41f651697	825	* ble.gap().setDeviceName().
rgrover1	716:11b41f651697	826	*/
rgrover1	716:11b41f651697	827	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	716:11b41f651697	828	return gap().setDeviceName(deviceName);
rgrover1	716:11b41f651697	829	}
rgrover1	716:11b41f651697	830
rgrover1	716:11b41f651697	831	/**
rgrover1	716:11b41f651697	832	* Get the value of the device name characteristic in the GAP service.
rgrover1	716:11b41f651697	833	* @param[out] deviceName
rgrover1	716:11b41f651697	834	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	716:11b41f651697	835	* terminated* string will be placed. Set this
rgrover1	716:11b41f651697	836	* value to NULL in order to obtain the deviceName-length
rgrover1	716:11b41f651697	837	* from the 'length' parameter.
rgrover1	716:11b41f651697	838	*
rgrover1	716:11b41f651697	839	* @param[in/out] lengthP
rgrover1	716:11b41f651697	840	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	716:11b41f651697	841	* (on output) the complete device name length (without the
rgrover1	716:11b41f651697	842	* null terminator).
rgrover1	716:11b41f651697	843	*
rgrover1	716:11b41f651697	844	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	845	* length will return the complete device name length, and not the
rgrover1	716:11b41f651697	846	* number of bytes actually returned in deviceName. The application may
rgrover1	716:11b41f651697	847	* use this information to retry with a suitable buffer size.
rgrover1	716:11b41f651697	848	*
rgrover1	716:11b41f651697	849	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	850	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	851	* ble.getDeviceName() should be replaced with
rgrover1	716:11b41f651697	852	* ble.gap().getDeviceName().
rgrover1	716:11b41f651697	853	*/
rgrover1	716:11b41f651697	854	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	716:11b41f651697	855	return gap().getDeviceName(deviceName, lengthP);
rgrover1	716:11b41f651697	856	}
rgrover1	716:11b41f651697	857
rgrover1	716:11b41f651697	858	/**
rgrover1	716:11b41f651697	859	* Set the appearance characteristic in the GAP service.
rgrover1	716:11b41f651697	860	* @param[in] appearance
rgrover1	716:11b41f651697	861	* The new value for the device-appearance.
rgrover1	716:11b41f651697	862	*
rgrover1	716:11b41f651697	863	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	864	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	865	* ble.setAppearance() should be replaced with
rgrover1	716:11b41f651697	866	* ble.gap().setAppearance().
rgrover1	716:11b41f651697	867	*/
rgrover1	716:11b41f651697	868	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	716:11b41f651697	869	return gap().setAppearance(appearance);
rgrover1	716:11b41f651697	870	}
rgrover1	716:11b41f651697	871
rgrover1	716:11b41f651697	872	/**
rgrover1	716:11b41f651697	873	* Get the appearance characteristic in the GAP service.
rgrover1	716:11b41f651697	874	* @param[out] appearance
rgrover1	716:11b41f651697	875	* The new value for the device-appearance.
rgrover1	716:11b41f651697	876	*
rgrover1	716:11b41f651697	877	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	878	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	879	* ble.getAppearance() should be replaced with
rgrover1	716:11b41f651697	880	* ble.gap().getAppearance().
rgrover1	716:11b41f651697	881	*/
rgrover1	716:11b41f651697	882	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	716:11b41f651697	883	return gap().getAppearance(appearanceP);
rgrover1	716:11b41f651697	884	}
rgrover1	716:11b41f651697	885
rgrover1	716:11b41f651697	886	/**
rgrover1	716:11b41f651697	887	* Set the radio's transmit power.
rgrover1	716:11b41f651697	888	* @param[in] txPower Radio transmit power in dBm.
rgrover1	716:11b41f651697	889	*
rgrover1	716:11b41f651697	890	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	891	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	892	* ble.setTxPower() should be replaced with
rgrover1	716:11b41f651697	893	* ble.gap().setTxPower().
rgrover1	716:11b41f651697	894	*/
rgrover1	716:11b41f651697	895	ble_error_t setTxPower(int8_t txPower) {
rgrover1	716:11b41f651697	896	return gap().setTxPower(txPower);
rgrover1	716:11b41f651697	897	}
rgrover1	716:11b41f651697	898
rgrover1	716:11b41f651697	899	/**
rgrover1	716:11b41f651697	900	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	716:11b41f651697	901	*
rgrover1	716:11b41f651697	902	* @param[out] valueArrayPP
rgrover1	716:11b41f651697	903	* Out parameter to receive the immutable array of Tx values.
rgrover1	716:11b41f651697	904	* @param[out] countP
rgrover1	716:11b41f651697	905	* Out parameter to receive the array's size.
rgrover1	716:11b41f651697	906	*
rgrover1	716:11b41f651697	907	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	908	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	909	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	716:11b41f651697	910	* ble.gap().getPermittedTxPowerValues().
rgrover1	716:11b41f651697	911	*/
rgrover1	716:11b41f651697	912	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	716:11b41f651697	913	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	716:11b41f651697	914	}
rgrover1	716:11b41f651697	915
rgrover1	716:11b41f651697	916	/**
rgrover1	716:11b41f651697	917	* Add a service declaration to the local server ATT table. Also add the
rgrover1	716:11b41f651697	918	* characteristics contained within.
rgrover1	716:11b41f651697	919	*
rgrover1	716:11b41f651697	920	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	921	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	922	* to ble.addService() should be replaced with
rgrover1	716:11b41f651697	923	* ble.gattServer().addService().
rgrover1	716:11b41f651697	924	*/
rgrover1	716:11b41f651697	925	ble_error_t addService(GattService &service) {
rgrover1	716:11b41f651697	926	return gattServer().addService(service);
rgrover1	716:11b41f651697	927	}
rgrover1	716:11b41f651697	928
rgrover1	716:11b41f651697	929	/**
rgrover1	716:11b41f651697	930	* Read the value of a characteristic from the local GattServer
rgrover1	716:11b41f651697	931	* @param[in] attributeHandle
rgrover1	716:11b41f651697	932	* Attribute handle for the value attribute of the characteristic.
rgrover1	716:11b41f651697	933	* @param[out] buffer
rgrover1	716:11b41f651697	934	* A buffer to hold the value being read.
rgrover1	716:11b41f651697	935	* @param[in/out] lengthP
rgrover1	716:11b41f651697	936	* Length of the buffer being supplied. If the attribute
rgrover1	716:11b41f651697	937	* value is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	938	* this variable will hold upon return the total attribute value length
rgrover1	716:11b41f651697	939	* (excluding offset). The application may use this
rgrover1	716:11b41f651697	940	* information to allocate a suitable buffer size.
rgrover1	716:11b41f651697	941	*
rgrover1	716:11b41f651697	942	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	716:11b41f651697	943	*
rgrover1	716:11b41f651697	944	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	945	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	946	* to ble.readCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	947	* ble.gattServer().read().
rgrover1	716:11b41f651697	948	*/
rgrover1	716:11b41f651697	949	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	716:11b41f651697	950	return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1	716:11b41f651697	951	}
rgrover1	716:11b41f651697	952
rgrover1	716:11b41f651697	953	/**
rgrover1	716:11b41f651697	954	* Read the value of a characteristic from the local GattServer
rgrover1	716:11b41f651697	955	* @param[in] connectionHandle
rgrover1	716:11b41f651697	956	* Connection Handle.
rgrover1	716:11b41f651697	957	* @param[in] attributeHandle
rgrover1	716:11b41f651697	958	* Attribute handle for the value attribute of the characteristic.
rgrover1	716:11b41f651697	959	* @param[out] buffer
rgrover1	716:11b41f651697	960	* A buffer to hold the value being read.
rgrover1	716:11b41f651697	961	* @param[in/out] lengthP
rgrover1	716:11b41f651697	962	* Length of the buffer being supplied. If the attribute
rgrover1	716:11b41f651697	963	* value is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	964	* this variable will hold upon return the total attribute value length
rgrover1	716:11b41f651697	965	* (excluding offset). The application may use this
rgrover1	716:11b41f651697	966	* information to allocate a suitable buffer size.
rgrover1	716:11b41f651697	967	*
rgrover1	716:11b41f651697	968	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	716:11b41f651697	969	*
rgrover1	716:11b41f651697	970	* @note This API is a version of above with an additional connection handle
rgrover1	716:11b41f651697	971	* parameter to allow fetches for connection-specific multivalued
rgrover1	733:718a3566b4ce	972	* attributes (such as the CCCDs).
rgrover1	716:11b41f651697	973	*
rgrover1	716:11b41f651697	974	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	975	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	976	* to ble.readCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	977	* ble.gattServer().read().
rgrover1	716:11b41f651697	978	*/
rgrover1	716:11b41f651697	979	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	716:11b41f651697	980	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	716:11b41f651697	981	}
rgrover1	716:11b41f651697	982
rgrover1	716:11b41f651697	983	/**
rgrover1	716:11b41f651697	984	* Update the value of a characteristic on the local GattServer.
rgrover1	716:11b41f651697	985	*
rgrover1	716:11b41f651697	986	* @param[in] attributeHandle
rgrover1	716:11b41f651697	987	* Handle for the value attribute of the Characteristic.
rgrover1	716:11b41f651697	988	* @param[in] value
rgrover1	716:11b41f651697	989	* A pointer to a buffer holding the new value
rgrover1	716:11b41f651697	990	* @param[in] size
rgrover1	716:11b41f651697	991	* Size of the new value (in bytes).
rgrover1	716:11b41f651697	992	* @param[in] localOnly
rgrover1	716:11b41f651697	993	* Should this update be kept on the local
rgrover1	716:11b41f651697	994	* GattServer regardless of the state of the
rgrover1	716:11b41f651697	995	* notify/indicate flag in the CCCD for this
rgrover1	716:11b41f651697	996	* Characteristic? If set to true, no notification
rgrover1	716:11b41f651697	997	* or indication is generated.
rgrover1	716:11b41f651697	998	*
rgrover1	716:11b41f651697	999	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	716:11b41f651697	1000	*
rgrover1	716:11b41f651697	1001	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1002	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1003	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	1004	* ble.gattServer().write().
rgrover1	716:11b41f651697	1005	*/
rgrover1	716:11b41f651697	1006	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1	716:11b41f651697	1007	const uint8_t *value,
rgrover1	716:11b41f651697	1008	uint16_t size,
rgrover1	716:11b41f651697	1009	bool localOnly = false) {
rgrover1	716:11b41f651697	1010	return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1	716:11b41f651697	1011	}
rgrover1	716:11b41f651697	1012
rgrover1	716:11b41f651697	1013	/**
rgrover1	716:11b41f651697	1014	* Update the value of a characteristic on the local GattServer. A version
rgrover1	716:11b41f651697	1015	* of the same as above with connection handle parameter to allow updates
rgrover1	733:718a3566b4ce	1016	* for connection-specific multivalued attributes (such as the CCCDs).
rgrover1	716:11b41f651697	1017	*
rgrover1	716:11b41f651697	1018	* @param[in] connectionHandle
rgrover1	716:11b41f651697	1019	* Connection Handle.
rgrover1	716:11b41f651697	1020	* @param[in] attributeHandle
rgrover1	716:11b41f651697	1021	* Handle for the value attribute of the Characteristic.
rgrover1	716:11b41f651697	1022	* @param[in] value
rgrover1	716:11b41f651697	1023	* A pointer to a buffer holding the new value
rgrover1	716:11b41f651697	1024	* @param[in] size
rgrover1	716:11b41f651697	1025	* Size of the new value (in bytes).
rgrover1	716:11b41f651697	1026	* @param[in] localOnly
rgrover1	716:11b41f651697	1027	* Should this update be kept on the local
rgrover1	716:11b41f651697	1028	* GattServer regardless of the state of the
rgrover1	716:11b41f651697	1029	* notify/indicate flag in the CCCD for this
rgrover1	716:11b41f651697	1030	* Characteristic? If set to true, no notification
rgrover1	716:11b41f651697	1031	* or indication is generated.
rgrover1	716:11b41f651697	1032	*
rgrover1	716:11b41f651697	1033	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	716:11b41f651697	1034	*
rgrover1	716:11b41f651697	1035	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1036	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1037	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	1038	* ble.gattServer().write().
rgrover1	716:11b41f651697	1039	*/
rgrover1	716:11b41f651697	1040	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	716:11b41f651697	1041	GattAttribute::Handle_t attributeHandle,
rgrover1	716:11b41f651697	1042	const uint8_t *value,
rgrover1	716:11b41f651697	1043	uint16_t size,
rgrover1	716:11b41f651697	1044	bool localOnly = false) {
rgrover1	716:11b41f651697	1045	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1	716:11b41f651697	1046	}
rgrover1	716:11b41f651697	1047
rgrover1	716:11b41f651697	1048	/**
rgrover1	716:11b41f651697	1049	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	716:11b41f651697	1050	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	716:11b41f651697	1051	* devices to securely exchange data and privately detect each other.
rgrover1	716:11b41f651697	1052	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	716:11b41f651697	1053	*
rgrover1	716:11b41f651697	1054	* @param[in] enableBonding Allow for bonding.
rgrover1	716:11b41f651697	1055	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	716:11b41f651697	1056	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	716:11b41f651697	1057	* such as availability of a display or keyboard to
rgrover1	716:11b41f651697	1058	* support out-of-band exchanges of security data.
rgrover1	716:11b41f651697	1059	* @param[in] passkey To specify a static passkey.
rgrover1	716:11b41f651697	1060	*
rgrover1	716:11b41f651697	1061	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	1062	*
rgrover1	716:11b41f651697	1063	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1064	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1065	* call to ble.initializeSecurity(...) should be replaced with
rgrover1	716:11b41f651697	1066	* ble.securityManager().init(...).
rgrover1	716:11b41f651697	1067	*/
rgrover1	716:11b41f651697	1068	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	716:11b41f651697	1069	bool requireMITM = true,
rgrover1	716:11b41f651697	1070	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1	716:11b41f651697	1071	const SecurityManager::Passkey_t passkey = NULL) {
rgrover1	716:11b41f651697	1072	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1	716:11b41f651697	1073	}
rgrover1	716:11b41f651697	1074
rgrover1	716:11b41f651697	1075	/**
rgrover1	716:11b41f651697	1076	* Get the security status of a connection.
rgrover1	716:11b41f651697	1077	*
rgrover1	716:11b41f651697	1078	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	716:11b41f651697	1079	* @param[out] securityStatusP security status.
rgrover1	716:11b41f651697	1080	*
rgrover1	716:11b41f651697	1081	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	716:11b41f651697	1082	*
rgrover1	716:11b41f651697	1083	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1084	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1085	* call to ble.getLinkSecurity(...) should be replaced with
rgrover1	716:11b41f651697	1086	* ble.securityManager().getLinkSecurity(...).
rgrover1	716:11b41f651697	1087	*/
rgrover1	716:11b41f651697	1088	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1	716:11b41f651697	1089	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	716:11b41f651697	1090	}
rgrover1	716:11b41f651697	1091
rgrover1	716:11b41f651697	1092	/**
rgrover1	716:11b41f651697	1093	* Delete all peer device context and all related bonding information from
rgrover1	716:11b41f651697	1094	* the database within the security manager.
rgrover1	716:11b41f651697	1095	*
rgrover1	716:11b41f651697	1096	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	716:11b41f651697	1097	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	716:11b41f651697	1098	* application registration.
rgrover1	716:11b41f651697	1099	*
rgrover1	716:11b41f651697	1100	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1101	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1102	* call to ble.purgeAllBondingState() should be replaced with
rgrover1	716:11b41f651697	1103	* ble.securityManager().purgeAllBondingState().
rgrover1	716:11b41f651697	1104	*/
rgrover1	716:11b41f651697	1105	ble_error_t purgeAllBondingState(void) {
rgrover1	716:11b41f651697	1106	return securityManager().purgeAllBondingState();
rgrover1	716:11b41f651697	1107	}
rgrover1	716:11b41f651697	1108
rgrover1	716:11b41f651697	1109	/**
rgrover1	716:11b41f651697	1110	* Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1	716:11b41f651697	1111	* possible event types.
rgrover1	716:11b41f651697	1112	*
rgrover1	716:11b41f651697	1113	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1114	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1115	* to ble.onTimeout(callback) should be replaced with
rgrover1	716:11b41f651697	1116	* ble.gap().onTimeout(callback).
rgrover1	716:11b41f651697	1117	*/
rgrover1	716:11b41f651697	1118	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1	716:11b41f651697	1119	gap().onTimeout(timeoutCallback);
rgrover1	716:11b41f651697	1120	}
rgrover1	716:11b41f651697	1121
rgrover1	716:11b41f651697	1122	/**
rgrover1	716:11b41f651697	1123	* Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1	716:11b41f651697	1124	*
rgrover1	716:11b41f651697	1125	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1126	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1127	* to ble.onConnection(callback) should be replaced with
rgrover1	716:11b41f651697	1128	* ble.gap().onConnection(callback).
rgrover1	716:11b41f651697	1129	*/
rgrover1	716:11b41f651697	1130	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1	716:11b41f651697	1131	gap().onConnection(connectionCallback);
rgrover1	716:11b41f651697	1132	}
rgrover1	716:11b41f651697	1133
rgrover1	716:11b41f651697	1134	/**
rgrover1	829:9072de50087b	1135	* Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1	716:11b41f651697	1136	*
rgrover1	716:11b41f651697	1137	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1138	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1139	* to ble.onDisconnection(callback) should be replaced with
rgrover1	716:11b41f651697	1140	* ble.gap().onDisconnection(callback).
rgrover1	716:11b41f651697	1141	*/
rgrover1	716:11b41f651697	1142	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1	716:11b41f651697	1143	gap().onDisconnection(disconnectionCallback);
rgrover1	716:11b41f651697	1144	}
rgrover1	716:11b41f651697	1145
rgrover1	716:11b41f651697	1146	template<typename T>
rgrover1	829:9072de50087b	1147	void onDisconnection(T tptr, void (T::mptr)(const Gap::DisconnectionCallbackParams_t*)) {
rgrover1	829:9072de50087b	1148	gap().onDisconnection(tptr, mptr);
rgrover1	716:11b41f651697	1149	}
rgrover1	716:11b41f651697	1150
rgrover1	716:11b41f651697	1151	/**
rgrover1	716:11b41f651697	1152	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	716:11b41f651697	1153	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	716:11b41f651697	1154	* radio is in use. The signal is sent using software interrupt.
rgrover1	716:11b41f651697	1155	*
rgrover1	716:11b41f651697	1156	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	716:11b41f651697	1157	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	716:11b41f651697	1158	* by the application programmer to synchronize application logic with radio
rgrover1	716:11b41f651697	1159	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	716:11b41f651697	1160	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	716:11b41f651697	1161	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	716:11b41f651697	1162	*
rgrover1	716:11b41f651697	1163	* @param callback
rgrover1	716:11b41f651697	1164	* The application handler to be invoked in response to a radio
rgrover1	716:11b41f651697	1165	* ACTIVE/INACTIVE event.
rgrover1	716:11b41f651697	1166	*
rgrover1	716:11b41f651697	1167	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1168	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1169	* to ble.onRadioNotification(...) should be replaced with
rgrover1	716:11b41f651697	1170	* ble.gap().onRadioNotification(...).
rgrover1	716:11b41f651697	1171	*/
rgrover1	752:424c2ae44553	1172	void onRadioNotification(void (*callback)(bool)) {
rgrover1	716:11b41f651697	1173	gap().onRadioNotification(callback);
rgrover1	716:11b41f651697	1174	}
rgrover1	716:11b41f651697	1175
rgrover1	716:11b41f651697	1176	/**
rgrover1	716:11b41f651697	1177	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	716:11b41f651697	1178	* updates are sent out by GATT in the form of notifications).
rgrover1	716:11b41f651697	1179	*
rgrover1	716:11b41f651697	1180	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	716:11b41f651697	1181	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1182	* to characteristics.
rgrover1	716:11b41f651697	1183	*
rgrover1	716:11b41f651697	1184	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1185	* some object.
rgrover1	716:11b41f651697	1186	*
rgrover1	716:11b41f651697	1187	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1188	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1189	* to ble.onDataSent(...) should be replaced with
rgrover1	716:11b41f651697	1190	* ble.gattServer().onDataSent(...).
rgrover1	716:11b41f651697	1191	*/
rgrover1	716:11b41f651697	1192	void onDataSent(void (*callback)(unsigned count)) {
rgrover1	716:11b41f651697	1193	gattServer().onDataSent(callback);
rgrover1	716:11b41f651697	1194	}
rgrover1	716:11b41f651697	1195	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1	716:11b41f651697	1196	gattServer().onDataSent(objPtr, memberPtr);
rgrover1	716:11b41f651697	1197	}
rgrover1	716:11b41f651697	1198
rgrover1	716:11b41f651697	1199	/**
rgrover1	716:11b41f651697	1200	* Setup a callback for when an attribute has its value updated by or at the
rgrover1	716:11b41f651697	1201	* connected peer. For a peripheral, this callback triggered when the local
rgrover1	716:11b41f651697	1202	* GATT server has an attribute updated by a write command from the peer.
rgrover1	716:11b41f651697	1203	* For a Central, this callback is triggered when a response is received for
rgrover1	716:11b41f651697	1204	* a write request.
rgrover1	716:11b41f651697	1205	*
rgrover1	716:11b41f651697	1206	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	716:11b41f651697	1207	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1208	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	716:11b41f651697	1209	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	716:11b41f651697	1210	*
rgrover1	716:11b41f651697	1211	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1212	* some object.
rgrover1	716:11b41f651697	1213	*
rgrover1	716:11b41f651697	1214	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1215	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1216	* to ble.onDataWritten(...) should be replaced with
rgrover1	716:11b41f651697	1217	* ble.gattServer().onDataWritten(...).
rgrover1	716:11b41f651697	1218	*/
rgrover1	716:11b41f651697	1219	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	716:11b41f651697	1220	gattServer().onDataWritten(callback);
rgrover1	716:11b41f651697	1221	}
rgrover1	716:11b41f651697	1222	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context)) {
rgrover1	716:11b41f651697	1223	gattServer().onDataWritten(objPtr, memberPtr);
rgrover1	716:11b41f651697	1224	}
rgrover1	716:11b41f651697	1225
rgrover1	716:11b41f651697	1226	/**
rgrover1	716:11b41f651697	1227	* Setup a callback to be invoked on the peripheral when an attribute is
rgrover1	716:11b41f651697	1228	* being read by a remote client.
rgrover1	716:11b41f651697	1229	*
rgrover1	716:11b41f651697	1230	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	716:11b41f651697	1231	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	716:11b41f651697	1232	* alternative.
rgrover1	716:11b41f651697	1233	*
rgrover1	716:11b41f651697	1234	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	716:11b41f651697	1235	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1236	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	716:11b41f651697	1237	* behind the scenes to trap interesting events.
rgrover1	716:11b41f651697	1238	*
rgrover1	716:11b41f651697	1239	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1240	* some object.
rgrover1	716:11b41f651697	1241	*
rgrover1	716:11b41f651697	1242	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	716:11b41f651697	1243	* else BLE_ERROR_NONE.
rgrover1	716:11b41f651697	1244	*
rgrover1	716:11b41f651697	1245	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1246	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1247	* to ble.onDataRead(...) should be replaced with
rgrover1	716:11b41f651697	1248	* ble.gattServer().onDataRead(...).
rgrover1	716:11b41f651697	1249	*/
rgrover1	716:11b41f651697	1250	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	716:11b41f651697	1251	return gattServer().onDataRead(callback);
rgrover1	716:11b41f651697	1252	}
rgrover1	716:11b41f651697	1253	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context)) {
rgrover1	716:11b41f651697	1254	return gattServer().onDataRead(objPtr, memberPtr);
rgrover1	716:11b41f651697	1255	}
rgrover1	716:11b41f651697	1256
rgrover1	716:11b41f651697	1257	/**
rgrover1	716:11b41f651697	1258	* Setup a callback for when notifications/indications are enabled for a
rgrover1	716:11b41f651697	1259	* characteristic on the local GattServer.
rgrover1	716:11b41f651697	1260	*
rgrover1	716:11b41f651697	1261	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1262	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1263	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	716:11b41f651697	1264	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	716:11b41f651697	1265	*/
rgrover1	716:11b41f651697	1266	void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1267	gattServer().onUpdatesEnabled(callback);
rgrover1	716:11b41f651697	1268	}
rgrover1	716:11b41f651697	1269
rgrover1	716:11b41f651697	1270	/**
rgrover1	716:11b41f651697	1271	* Setup a callback for when notifications/indications are disabled for a
rgrover1	716:11b41f651697	1272	* characteristic on the local GattServer.
rgrover1	716:11b41f651697	1273	*
rgrover1	716:11b41f651697	1274	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1275	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1276	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	716:11b41f651697	1277	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	716:11b41f651697	1278	*/
rgrover1	716:11b41f651697	1279	void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1280	gattServer().onUpdatesDisabled(callback);
rgrover1	716:11b41f651697	1281	}
rgrover1	716:11b41f651697	1282
rgrover1	716:11b41f651697	1283	/**
rgrover1	716:11b41f651697	1284	* Setup a callback for when the GATT server receives a response for an
rgrover1	716:11b41f651697	1285	* indication event sent previously.
rgrover1	716:11b41f651697	1286	*
rgrover1	716:11b41f651697	1287	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1288	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1289	* to ble.onConfirmationReceived(callback) should be replaced with
rgrover1	716:11b41f651697	1290	* ble.gattServer().onConfirmationReceived(callback).
rgrover1	716:11b41f651697	1291	*/
rgrover1	716:11b41f651697	1292	void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1293	gattServer().onConfirmationReceived(callback);
rgrover1	716:11b41f651697	1294	}
rgrover1	716:11b41f651697	1295
rgrover1	716:11b41f651697	1296	/**
rgrover1	716:11b41f651697	1297	* Setup a callback for when the security setup procedure (key generation
rgrover1	716:11b41f651697	1298	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	716:11b41f651697	1299	* devices. The callback is passed in parameters received from the peer's
rgrover1	716:11b41f651697	1300	* security request: bool allowBonding, bool requireMITM, and
rgrover1	716:11b41f651697	1301	* SecurityIOCapabilities_t.
rgrover1	716:11b41f651697	1302	*
rgrover1	716:11b41f651697	1303	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1304	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1305	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1	716:11b41f651697	1306	* ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1	716:11b41f651697	1307	*/
rgrover1	716:11b41f651697	1308	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1	716:11b41f651697	1309	securityManager().onSecuritySetupInitiated(callback);
rgrover1	716:11b41f651697	1310	}
rgrover1	716:11b41f651697	1311
rgrover1	716:11b41f651697	1312	/**
rgrover1	716:11b41f651697	1313	* Setup a callback for when the security setup procedure (key generation
rgrover1	716:11b41f651697	1314	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	716:11b41f651697	1315	* devices. The callback is passed in the success/failure status of the
rgrover1	716:11b41f651697	1316	* security setup procedure.
rgrover1	716:11b41f651697	1317	*
rgrover1	716:11b41f651697	1318	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1319	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1320	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1	716:11b41f651697	1321	* ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1	716:11b41f651697	1322	*/
rgrover1	716:11b41f651697	1323	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1	716:11b41f651697	1324	securityManager().onSecuritySetupCompleted(callback);
rgrover1	716:11b41f651697	1325	}
rgrover1	716:11b41f651697	1326
rgrover1	716:11b41f651697	1327	/**
rgrover1	716:11b41f651697	1328	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	716:11b41f651697	1329	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	716:11b41f651697	1330	* this callback when the link is secured and setup procedures will not
rgrover1	716:11b41f651697	1331	* occur unless the bonding information is either lost or deleted on either
rgrover1	716:11b41f651697	1332	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1	716:11b41f651697	1333	* to the level of security in effect for the secured link.
rgrover1	716:11b41f651697	1334	*
rgrover1	716:11b41f651697	1335	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1336	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1337	* call to ble.onLinkSecured(callback) should be replaced with
rgrover1	716:11b41f651697	1338	* ble.securityManager().onLinkSecured(callback).
rgrover1	716:11b41f651697	1339	*/
rgrover1	716:11b41f651697	1340	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1	716:11b41f651697	1341	securityManager().onLinkSecured(callback);
rgrover1	716:11b41f651697	1342	}
rgrover1	716:11b41f651697	1343
rgrover1	716:11b41f651697	1344	/**
rgrover1	716:11b41f651697	1345	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	716:11b41f651697	1346	* context is stored persistently for a peer device.
rgrover1	716:11b41f651697	1347	*
rgrover1	716:11b41f651697	1348	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1349	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1350	* call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1	716:11b41f651697	1351	* ble.securityManager().onSecurityContextStored(callback).
rgrover1	716:11b41f651697	1352	*/
rgrover1	716:11b41f651697	1353	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1	716:11b41f651697	1354	securityManager().onSecurityContextStored(callback);
rgrover1	716:11b41f651697	1355	}
rgrover1	716:11b41f651697	1356
rgrover1	716:11b41f651697	1357	/**
rgrover1	716:11b41f651697	1358	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	716:11b41f651697	1359	* peripheral with DISPLAY capability. This happens when security is
rgrover1	716:11b41f651697	1360	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	716:11b41f651697	1361	* needs to be exchanged between the peers to authenticate the connection
rgrover1	716:11b41f651697	1362	* attempt.
rgrover1	716:11b41f651697	1363	*
rgrover1	716:11b41f651697	1364	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1365	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1366	* call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1	716:11b41f651697	1367	* ble.securityManager().onPasskeyDisplay(callback).
rgrover1	716:11b41f651697	1368	*/
rgrover1	716:11b41f651697	1369	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1	716:11b41f651697	1370	return securityManager().onPasskeyDisplay(callback);
rgrover1	716:11b41f651697	1371	}
rgrover1	716:11b41f651697	1372
rgrover1	716:11b41f651697	1373	private:
rgrover1	806:50c121156a71	1374	BLE(const BLE&);
rgrover1	806:50c121156a71	1375	BLE &operator=(const BLE &);
rgrover1	806:50c121156a71	1376
rgrover1	806:50c121156a71	1377	private:
rgrover1	854:ad4ae73c2b5a	1378	InstanceID_t instanceID;
rgrover1	822:a0f080d1e836	1379	BLEInstanceBase transport; / the device specific backend */
rgrover1	716:11b41f651697	1380	};
rgrover1	716:11b41f651697	1381
rgrover1	716:11b41f651697	1382	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	716:11b41f651697	1383	* code. Will be dropped at some point soon.*/
rgrover1	716:11b41f651697	1384
rgrover1	716:11b41f651697	1385	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	19 Dec 2017
Imports:	6
Forks:	0
Commits:	1210
Dependents:	0
Dependencies:	0
Followers:	1

ble/BLE.h@854:ad4ae73c2b5a, 2015-11-02 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning