BLE_API - fka mod

Users » FrancisDrake » Code » BLE_API

fka mod

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1188:039621a96054, 2016-04-06 (annotated)

Committer:: vcoubard
Date:: Wed Apr 06 19:15:42 2016 +0100
Revision:: 1188:039621a96054
Parent:: 1187:231e4007429a
Child:: 1189:740911150041

Synchronized with git rev bdfcd49c

Author: Andres Amaya Garcia

Gap doesnt commit adv payload changes on failure



Gap function members that modify the advertising and scan payload use the

underlying stack to test if the new payload is sane. If any errors are

generated, then the changes are not committed to copy of the payload in BLE API.

Who changed what in which revision?

User	Revision	Line number	New contents of line
vcoubard	1131:692ddf04fc42	1	/* mbed Microcontroller Library
vcoubard	1131:692ddf04fc42	2	* Copyright (c) 2006-2013 ARM Limited
vcoubard	1131:692ddf04fc42	3	*
vcoubard	1131:692ddf04fc42	4	* Licensed under the Apache License, Version 2.0 (the "License");
vcoubard	1131:692ddf04fc42	5	* you may not use this file except in compliance with the License.
vcoubard	1131:692ddf04fc42	6	* You may obtain a copy of the License at
vcoubard	1131:692ddf04fc42	7	*
vcoubard	1131:692ddf04fc42	8	* http://www.apache.org/licenses/LICENSE-2.0
vcoubard	1131:692ddf04fc42	9	*
vcoubard	1131:692ddf04fc42	10	* Unless required by applicable law or agreed to in writing, software
vcoubard	1131:692ddf04fc42	11	* distributed under the License is distributed on an "AS IS" BASIS,
vcoubard	1131:692ddf04fc42	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard	1131:692ddf04fc42	13	* See the License for the specific language governing permissions and
vcoubard	1131:692ddf04fc42	14	* limitations under the License.
vcoubard	1131:692ddf04fc42	15	*/
vcoubard	1131:692ddf04fc42	16
vcoubard	1131:692ddf04fc42	17	#ifndef __GAP_H__
vcoubard	1131:692ddf04fc42	18	#define __GAP_H__
vcoubard	1131:692ddf04fc42	19
vcoubard	1135:22aada733dbd	20	#include "ble/BLEProtocol.h"
vcoubard	1131:692ddf04fc42	21	#include "GapAdvertisingData.h"
vcoubard	1131:692ddf04fc42	22	#include "GapAdvertisingParams.h"
vcoubard	1131:692ddf04fc42	23	#include "GapScanningParams.h"
vcoubard	1131:692ddf04fc42	24	#include "GapEvents.h"
vcoubard	1131:692ddf04fc42	25	#include "CallChainOfFunctionPointersWithContext.h"
vcoubard	1131:692ddf04fc42	26	#include "FunctionPointerWithContext.h"
vcoubard	1135:22aada733dbd	27	#include "deprecate.h"
vcoubard	1131:692ddf04fc42	28
vcoubard	1131:692ddf04fc42	29	/* Forward declarations for classes that will only be used for pointers or references in the following. */
vcoubard	1131:692ddf04fc42	30	class GapAdvertisingParams;
vcoubard	1131:692ddf04fc42	31	class GapScanningParams;
vcoubard	1131:692ddf04fc42	32	class GapAdvertisingData;
vcoubard	1131:692ddf04fc42	33
vcoubard	1131:692ddf04fc42	34	class Gap {
vcoubard	1135:22aada733dbd	35	/*
vcoubard	1135:22aada733dbd	36	* DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard	1135:22aada733dbd	37	* They have been relocated to the class BLEProtocol.
vcoubard	1135:22aada733dbd	38	*/
vcoubard	1131:692ddf04fc42	39	public:
vcoubard	1135:22aada733dbd	40	/**
vcoubard	1135:22aada733dbd	41	* Address-type for BLEProtocol addresses.
vcoubard	1135:22aada733dbd	42	*
vcoubard	1183:1589830dbdb7	43	* @deprecated Use BLEProtocol::AddressType_t instead.
vcoubard	1135:22aada733dbd	44	*/
vcoubard	1135:22aada733dbd	45	typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard	1135:22aada733dbd	46
vcoubard	1135:22aada733dbd	47	/**
vcoubard	1135:22aada733dbd	48	* Address-type for BLEProtocol addresses.
vcoubard	1183:1589830dbdb7	49	*
vcoubard	1183:1589830dbdb7	50	* @deprecated Use BLEProtocol::AddressType_t instead.
vcoubard	1135:22aada733dbd	51	*/
vcoubard	1135:22aada733dbd	52	typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard	1135:22aada733dbd	53
vcoubard	1135:22aada733dbd	54	/**
vcoubard	1135:22aada733dbd	55	* Address-type for BLEProtocol addresses.
vcoubard	1135:22aada733dbd	56	*
vcoubard	1183:1589830dbdb7	57	* @deprecated Use BLEProtocol::AddressType_t instead. The following
vcoubard	1183:1589830dbdb7	58	* constants have been left in their deprecated state to
vcoubard	1183:1589830dbdb7	59	* transparenly support existing applications which may have
vcoubard	1183:1589830dbdb7	60	* used Gap::ADDR_TYPE_*.
vcoubard	1135:22aada733dbd	61	*/
vcoubard	1135:22aada733dbd	62	enum DeprecatedAddressType_t {
vcoubard	1135:22aada733dbd	63	ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
vcoubard	1135:22aada733dbd	64	ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard	1135:22aada733dbd	65	ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
vcoubard	1135:22aada733dbd	66	ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
vcoubard	1131:692ddf04fc42	67	};
vcoubard	1131:692ddf04fc42	68
vcoubard	1183:1589830dbdb7	69	/**
vcoubard	1183:1589830dbdb7	70	* Length (in octets) of the BLE MAC address.
vcoubard	1183:1589830dbdb7	71	*/
vcoubard	1183:1589830dbdb7	72	static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN;
vcoubard	1183:1589830dbdb7	73	/**
vcoubard	1183:1589830dbdb7	74	* 48-bit address, LSB format.
vcoubard	1183:1589830dbdb7	75	*
vcoubard	1183:1589830dbdb7	76	* @deprecated Use BLEProtocol::AddressBytes_t instead.
vcoubard	1183:1589830dbdb7	77	*/
vcoubard	1183:1589830dbdb7	78	typedef BLEProtocol::AddressBytes_t Address_t;
vcoubard	1183:1589830dbdb7	79	/**
vcoubard	1183:1589830dbdb7	80	* 48-bit address, LSB format.
vcoubard	1183:1589830dbdb7	81	*
vcoubard	1183:1589830dbdb7	82	* @deprecated Use BLEProtocol::AddressBytes_t instead.
vcoubard	1183:1589830dbdb7	83	*/
vcoubard	1183:1589830dbdb7	84	typedef BLEProtocol::AddressBytes_t address_t;
vcoubard	1131:692ddf04fc42	85
vcoubard	1135:22aada733dbd	86	public:
vcoubard	1183:1589830dbdb7	87	/**
vcoubard	1183:1589830dbdb7	88	* Enumeration for timeout sources.
vcoubard	1183:1589830dbdb7	89	*/
vcoubard	1131:692ddf04fc42	90	enum TimeoutSource_t {
vcoubard	1131:692ddf04fc42	91	TIMEOUT_SRC_ADVERTISING = 0x00, /*< Advertising timeout. /
vcoubard	1131:692ddf04fc42	92	TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /*< Security request timeout. /
vcoubard	1131:692ddf04fc42	93	TIMEOUT_SRC_SCAN = 0x02, /*< Scanning timeout. /
vcoubard	1131:692ddf04fc42	94	TIMEOUT_SRC_CONN = 0x03, /*< Connection timeout. /
vcoubard	1131:692ddf04fc42	95	};
vcoubard	1131:692ddf04fc42	96
vcoubard	1131:692ddf04fc42	97	/**
vcoubard	1131:692ddf04fc42	98	* Enumeration for disconnection reasons. The values for these reasons are
vcoubard	1131:692ddf04fc42	99	* derived from Nordic's implementation, but the reasons are meant to be
vcoubard	1131:692ddf04fc42	100	* independent of the transport. If you are returned a reason that is not
vcoubard	1131:692ddf04fc42	101	* covered by this enumeration, please refer to the underlying
vcoubard	1131:692ddf04fc42	102	* transport library.
vcoubard	1131:692ddf04fc42	103	*/
vcoubard	1131:692ddf04fc42	104	enum DisconnectionReason_t {
vcoubard	1131:692ddf04fc42	105	CONNECTION_TIMEOUT = 0x08,
vcoubard	1131:692ddf04fc42	106	REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard	1131:692ddf04fc42	107	REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /*< Remote device terminated connection due to low resources./
vcoubard	1131:692ddf04fc42	108	REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /*< Remote device terminated connection due to power off. /
vcoubard	1131:692ddf04fc42	109	LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
vcoubard	1131:692ddf04fc42	110	CONN_INTERVAL_UNACCEPTABLE = 0x3B,
vcoubard	1131:692ddf04fc42	111	};
vcoubard	1131:692ddf04fc42	112
vcoubard	1135:22aada733dbd	113	/**
vcoubard	1135:22aada733dbd	114	* Enumeration for whitelist advertising policy filter modes. The possible
vcoubard	1135:22aada733dbd	115	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1135:22aada733dbd	116	* 4.2 (Vol. 6), Part B, Section 4.3.2.
vcoubard	1135:22aada733dbd	117	*
vcoubard	1135:22aada733dbd	118	* @experimental
vcoubard	1135:22aada733dbd	119	*/
vcoubard	1135:22aada733dbd	120	enum AdvertisingPolicyMode_t {
vcoubard	1135:22aada733dbd	121	ADV_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1135:22aada733dbd	122	ADV_POLICY_FILTER_SCAN_REQS = 1,
vcoubard	1135:22aada733dbd	123	ADV_POLICY_FILTER_CONN_REQS = 2,
vcoubard	1135:22aada733dbd	124	ADV_POLICY_FILTER_ALL_REQS = 3,
vcoubard	1135:22aada733dbd	125	};
vcoubard	1135:22aada733dbd	126
vcoubard	1135:22aada733dbd	127	/**
vcoubard	1135:22aada733dbd	128	* Enumeration for whitelist scanning policy filter modes. The possible
vcoubard	1135:22aada733dbd	129	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1135:22aada733dbd	130	* 4.2 (Vol. 6), Part B, Section 4.3.3.
vcoubard	1135:22aada733dbd	131	*
vcoubard	1135:22aada733dbd	132	* @experimental
vcoubard	1135:22aada733dbd	133	*/
vcoubard	1135:22aada733dbd	134	enum ScanningPolicyMode_t {
vcoubard	1135:22aada733dbd	135	SCAN_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1135:22aada733dbd	136	SCAN_POLICY_FILTER_ALL_ADV = 1,
vcoubard	1135:22aada733dbd	137	};
vcoubard	1135:22aada733dbd	138
vcoubard	1135:22aada733dbd	139	/**
vcoubard	1135:22aada733dbd	140	* Enumeration for the whitelist initiator policy fiter modes. The possible
vcoubard	1135:22aada733dbd	141	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1135:22aada733dbd	142	* 4.2 (vol. 6), Part B, Section 4.4.4.
vcoubard	1135:22aada733dbd	143	*
vcoubard	1135:22aada733dbd	144	* @experimental
vcoubard	1135:22aada733dbd	145	*/
vcoubard	1135:22aada733dbd	146	enum InitiatorPolicyMode_t {
vcoubard	1135:22aada733dbd	147	INIT_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1135:22aada733dbd	148	INIT_POLICY_FILTER_ALL_ADV = 1,
vcoubard	1135:22aada733dbd	149	};
vcoubard	1135:22aada733dbd	150
vcoubard	1135:22aada733dbd	151	/**
vcoubard	1135:22aada733dbd	152	* Representation of a Bluetooth Low Enery Whitelist containing addresses.
vcoubard	1135:22aada733dbd	153	*
vcoubard	1135:22aada733dbd	154	* @experimental
vcoubard	1135:22aada733dbd	155	*/
vcoubard	1135:22aada733dbd	156	struct Whitelist_t {
vcoubard	1183:1589830dbdb7	157	BLEProtocol::Address_t addresses; /< List of BLE addresses in the whitelist. /
vcoubard	1183:1589830dbdb7	158	uint8_t size; /*< Total number of BLE addresses in this whitelist /
vcoubard	1183:1589830dbdb7	159	uint8_t capacity; /*< Maximum number of BLE addresses that can be added to this whitelist. /
vcoubard	1135:22aada733dbd	160	};
vcoubard	1135:22aada733dbd	161
vcoubard	1135:22aada733dbd	162
vcoubard	1183:1589830dbdb7	163	/**
vcoubard	1183:1589830dbdb7	164	* Describes the current state of the device (more than one bit can be set).
vcoubard	1183:1589830dbdb7	165	*/
vcoubard	1131:692ddf04fc42	166	struct GapState_t {
vcoubard	1131:692ddf04fc42	167	unsigned advertising : 1; /*< Peripheral is currently advertising. /
vcoubard	1131:692ddf04fc42	168	unsigned connected : 1; /*< Peripheral is connected to a central. /
vcoubard	1131:692ddf04fc42	169	};
vcoubard	1131:692ddf04fc42	170
vcoubard	1183:1589830dbdb7	171	/**
vcoubard	1183:1589830dbdb7	172	* Type for connection handle.
vcoubard	1183:1589830dbdb7	173	*/
vcoubard	1183:1589830dbdb7	174	typedef uint16_t Handle_t;
vcoubard	1131:692ddf04fc42	175
vcoubard	1183:1589830dbdb7	176	/**
vcoubard	1183:1589830dbdb7	177	* Structure containing GAP connection parameters. When in peripheral role
vcoubard	1183:1589830dbdb7	178	* the connection parameters are suggestions. The choice of the connection
vcoubard	1183:1589830dbdb7	179	* parameters is eventually up to the central.
vcoubard	1183:1589830dbdb7	180	*/
vcoubard	1131:692ddf04fc42	181	typedef struct {
vcoubard	1183:1589830dbdb7	182	uint16_t minConnectionInterval; /*< Minimum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS./
vcoubard	1183:1589830dbdb7	183	uint16_t maxConnectionInterval; /*< Maximum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS./
vcoubard	1183:1589830dbdb7	184	uint16_t slaveLatency; /*< Slave Latency in number of connection events, see BLE_GAP_CP_LIMITS./
vcoubard	1183:1589830dbdb7	185	uint16_t connectionSupervisionTimeout; /*< Connection Supervision Timeout in 10 ms units, see BLE_GAP_CP_LIMITS./
vcoubard	1131:692ddf04fc42	186	} ConnectionParams_t;
vcoubard	1131:692ddf04fc42	187
vcoubard	1183:1589830dbdb7	188	/**
vcoubard	1183:1589830dbdb7	189	* Enumeration for the possible GAP roles of a BLE device.
vcoubard	1183:1589830dbdb7	190	*/
vcoubard	1131:692ddf04fc42	191	enum Role_t {
vcoubard	1131:692ddf04fc42	192	PERIPHERAL = 0x1, /*< Peripheral Role. /
vcoubard	1131:692ddf04fc42	193	CENTRAL = 0x2, /*< Central Role. /
vcoubard	1131:692ddf04fc42	194	};
vcoubard	1131:692ddf04fc42	195
vcoubard	1183:1589830dbdb7	196	/**
vcoubard	1183:1589830dbdb7	197	* Structure containing data and metadata of a scanned advertising packet.
vcoubard	1183:1589830dbdb7	198	*/
vcoubard	1131:692ddf04fc42	199	struct AdvertisementCallbackParams_t {
vcoubard	1183:1589830dbdb7	200	BLEProtocol::AddressBytes_t peerAddr; /*< The peer's BLE address. /
vcoubard	1183:1589830dbdb7	201	int8_t rssi; /*< The advertisement packet RSSI value. /
vcoubard	1183:1589830dbdb7	202	bool isScanResponse; /*< Whether this packet is the response to a scan request. /
vcoubard	1183:1589830dbdb7	203	GapAdvertisingParams::AdvertisingType_t type; /*< The type of advertisement. /
vcoubard	1183:1589830dbdb7	204	uint8_t advertisingDataLen; /*< Length of the advertisement data. /
vcoubard	1183:1589830dbdb7	205	const uint8_t advertisingData; /< Pointer to the advertisement packet's data. /
vcoubard	1131:692ddf04fc42	206	};
vcoubard	1183:1589830dbdb7	207
vcoubard	1183:1589830dbdb7	208	/**
vcoubard	1183:1589830dbdb7	209	* Type for the handlers of advertisement callback events. Refer to
vcoubard	1183:1589830dbdb7	210	* Gap::startScan().
vcoubard	1183:1589830dbdb7	211	*/
vcoubard	1131:692ddf04fc42	212	typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
vcoubard	1131:692ddf04fc42	213
vcoubard	1183:1589830dbdb7	214	/**
vcoubard	1183:1589830dbdb7	215	* Encapsulates the parameters of a connection. This information is passed
vcoubard	1183:1589830dbdb7	216	* to the registered handler of connection events. Refer to Gap::onConnection().
vcoubard	1183:1589830dbdb7	217	*/
vcoubard	1131:692ddf04fc42	218	struct ConnectionCallbackParams_t {
vcoubard	1183:1589830dbdb7	219	Handle_t handle; /*< The ID for this connection /
vcoubard	1183:1589830dbdb7	220	Role_t role; /*< This device's role in the connection /
vcoubard	1183:1589830dbdb7	221	BLEProtocol::AddressType_t peerAddrType; /*< The peer's BLE address type /
vcoubard	1183:1589830dbdb7	222	BLEProtocol::AddressBytes_t peerAddr; /*< The peer's BLE address /
vcoubard	1183:1589830dbdb7	223	BLEProtocol::AddressType_t ownAddrType; /*< This device's BLE address type /
vcoubard	1183:1589830dbdb7	224	BLEProtocol::AddressBytes_t ownAddr; /*< This devices's BLE address /
vcoubard	1183:1589830dbdb7	225	const ConnectionParams_t connectionParams; /< The currently configured connection parameters /
vcoubard	1131:692ddf04fc42	226
vcoubard	1183:1589830dbdb7	227	/**
vcoubard	1183:1589830dbdb7	228	* Constructor for ConnectionCallbackParams_t.
vcoubard	1183:1589830dbdb7	229	*
vcoubard	1183:1589830dbdb7	230	* @param[in] handleIn
vcoubard	1183:1589830dbdb7	231	* Value for ConnectionCallbackParams_t::handle
vcoubard	1183:1589830dbdb7	232	* @param[in] roleIn
vcoubard	1183:1589830dbdb7	233	* Value for ConnectionCallbackParams_t::role
vcoubard	1183:1589830dbdb7	234	* @param[in] peerAddrTypeIn
vcoubard	1183:1589830dbdb7	235	* Value for ConnectionCallbackParams_t::peerAddrType
vcoubard	1183:1589830dbdb7	236	* @param[in] peerAddrIn
vcoubard	1183:1589830dbdb7	237	* Value for ConnectionCallbackParams_t::peerAddr
vcoubard	1183:1589830dbdb7	238	* @param[in] ownAddrTypeIn
vcoubard	1183:1589830dbdb7	239	* Value for ConnectionCallbackParams_t::ownAddrType
vcoubard	1183:1589830dbdb7	240	* @param[in] ownAddrIn
vcoubard	1183:1589830dbdb7	241	* Value for ConnectionCallbackParams_t::ownAddr
vcoubard	1183:1589830dbdb7	242	* @param[in] connectionParamsIn
vcoubard	1183:1589830dbdb7	243	* Value for ConnectionCallbackParams_t::connectionParams
vcoubard	1183:1589830dbdb7	244	*/
vcoubard	1135:22aada733dbd	245	ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard	1135:22aada733dbd	246	Role_t roleIn,
vcoubard	1135:22aada733dbd	247	BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard	1135:22aada733dbd	248	const uint8_t *peerAddrIn,
vcoubard	1135:22aada733dbd	249	BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard	1135:22aada733dbd	250	const uint8_t *ownAddrIn,
vcoubard	1135:22aada733dbd	251	const ConnectionParams_t *connectionParamsIn) :
vcoubard	1131:692ddf04fc42	252	handle(handleIn),
vcoubard	1131:692ddf04fc42	253	role(roleIn),
vcoubard	1131:692ddf04fc42	254	peerAddrType(peerAddrTypeIn),
vcoubard	1131:692ddf04fc42	255	peerAddr(),
vcoubard	1131:692ddf04fc42	256	ownAddrType(ownAddrTypeIn),
vcoubard	1131:692ddf04fc42	257	ownAddr(),
vcoubard	1131:692ddf04fc42	258	connectionParams(connectionParamsIn) {
vcoubard	1131:692ddf04fc42	259	memcpy(peerAddr, peerAddrIn, ADDR_LEN);
vcoubard	1131:692ddf04fc42	260	memcpy(ownAddr, ownAddrIn, ADDR_LEN);
vcoubard	1131:692ddf04fc42	261	}
vcoubard	1131:692ddf04fc42	262	};
vcoubard	1131:692ddf04fc42	263
vcoubard	1183:1589830dbdb7	264	/**
vcoubard	1183:1589830dbdb7	265	* Structure that encapsulates information about a disconnection event.
vcoubard	1183:1589830dbdb7	266	* Refer to Gap::onDisconnection().
vcoubard	1183:1589830dbdb7	267	*/
vcoubard	1131:692ddf04fc42	268	struct DisconnectionCallbackParams_t {
vcoubard	1183:1589830dbdb7	269	Handle_t handle; /*< The ID of the connection that caused the disconnection event /
vcoubard	1183:1589830dbdb7	270	DisconnectionReason_t reason; /*< The reason of the disconnection event /
vcoubard	1131:692ddf04fc42	271
vcoubard	1183:1589830dbdb7	272	/**
vcoubard	1183:1589830dbdb7	273	* Constructor for DisconnectionCallbackParams_t.
vcoubard	1183:1589830dbdb7	274	*
vcoubard	1183:1589830dbdb7	275	* @param[in] handleIn
vcoubard	1183:1589830dbdb7	276	* Value for DisconnectionCallbackParams_t::handle.
vcoubard	1183:1589830dbdb7	277	* @param[in] reasonIn
vcoubard	1183:1589830dbdb7	278	* Value for DisconnectionCallbackParams_t::reason.
vcoubard	1183:1589830dbdb7	279	*/
vcoubard	1131:692ddf04fc42	280	DisconnectionCallbackParams_t(Handle_t handleIn,
vcoubard	1131:692ddf04fc42	281	DisconnectionReason_t reasonIn) :
vcoubard	1131:692ddf04fc42	282	handle(handleIn),
vcoubard	1131:692ddf04fc42	283	reason(reasonIn)
vcoubard	1131:692ddf04fc42	284	{}
vcoubard	1131:692ddf04fc42	285	};
vcoubard	1131:692ddf04fc42	286
vcoubard	1131:692ddf04fc42	287	static const uint16_t UNIT_1_25_MS = 1250; /*< Number of microseconds in 1.25 milliseconds. /
vcoubard	1183:1589830dbdb7	288	/**
vcoubard	1183:1589830dbdb7	289	* Helper function to convert from units of milliseconds to GAP duration
vcoubard	1183:1589830dbdb7	290	* units.
vcoubard	1183:1589830dbdb7	291	*
vcoubard	1183:1589830dbdb7	292	* @param[in] durationInMillis
vcoubard	1183:1589830dbdb7	293	* The duration in milliseconds.
vcoubard	1183:1589830dbdb7	294	*
vcoubard	1183:1589830dbdb7	295	* @return The duration in GAP duration units.
vcoubard	1183:1589830dbdb7	296	*/
vcoubard	1131:692ddf04fc42	297	static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
vcoubard	1131:692ddf04fc42	298	return (durationInMillis * 1000) / UNIT_1_25_MS;
vcoubard	1131:692ddf04fc42	299	}
vcoubard	1131:692ddf04fc42	300
vcoubard	1183:1589830dbdb7	301	/**
vcoubard	1183:1589830dbdb7	302	* Type for the registered callbacks added to the timeout event callchain.
vcoubard	1183:1589830dbdb7	303	* Refer to Gap::onTimeout().
vcoubard	1183:1589830dbdb7	304	*/
vcoubard	1131:692ddf04fc42	305	typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard	1183:1589830dbdb7	306	/**
vcoubard	1183:1589830dbdb7	307	* Type for the timeout event callchain. Refer to Gap::onTimeout().
vcoubard	1183:1589830dbdb7	308	*/
vcoubard	1131:692ddf04fc42	309	typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
vcoubard	1131:692ddf04fc42	310
vcoubard	1183:1589830dbdb7	311	/**
vcoubard	1183:1589830dbdb7	312	* Type for the registered callbacks added to the connection event
vcoubard	1183:1589830dbdb7	313	* callchain. Refer to Gap::onConnection().
vcoubard	1183:1589830dbdb7	314	*/
vcoubard	1131:692ddf04fc42	315	typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard	1183:1589830dbdb7	316	/**
vcoubard	1183:1589830dbdb7	317	* Type for the connection event callchain. Refer to Gap::onConnection().
vcoubard	1183:1589830dbdb7	318	*/
vcoubard	1131:692ddf04fc42	319	typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard	1131:692ddf04fc42	320
vcoubard	1183:1589830dbdb7	321	/**
vcoubard	1183:1589830dbdb7	322	* Type for the registered callbacks added to the disconnection event
vcoubard	1183:1589830dbdb7	323	* callchain. Refer to Gap::onDisconnetion().
vcoubard	1183:1589830dbdb7	324	*/
vcoubard	1131:692ddf04fc42	325	typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard	1183:1589830dbdb7	326	/**
vcoubard	1183:1589830dbdb7	327	* Type for the disconnection event callchain. Refer to Gap::onDisconnection().
vcoubard	1183:1589830dbdb7	328	*/
vcoubard	1132:6362b7c2fdff	329	typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard	1131:692ddf04fc42	330
vcoubard	1183:1589830dbdb7	331	/**
vcoubard	1183:1589830dbdb7	332	* Type for the handlers of radio notification callback events. Refer to
vcoubard	1183:1589830dbdb7	333	* Gap::onRadioNotification().
vcoubard	1183:1589830dbdb7	334	*/
vcoubard	1131:692ddf04fc42	335	typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
vcoubard	1131:692ddf04fc42	336
vcoubard	1183:1589830dbdb7	337	/**
vcoubard	1183:1589830dbdb7	338	* Type for the handlers of shutdown callback events. Refer to
vcoubard	1183:1589830dbdb7	339	* Gap::onShutdown().
vcoubard	1183:1589830dbdb7	340	*/
vcoubard	1135:22aada733dbd	341	typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard	1183:1589830dbdb7	342	/**
vcoubard	1183:1589830dbdb7	343	* Type for the shutdown event callchain. Refer to Gap::onShutdown().
vcoubard	1183:1589830dbdb7	344	*/
vcoubard	1135:22aada733dbd	345	typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard	1135:22aada733dbd	346
vcoubard	1131:692ddf04fc42	347	/*
vcoubard	1131:692ddf04fc42	348	* The following functions are meant to be overridden in the platform-specific sub-class.
vcoubard	1131:692ddf04fc42	349	*/
vcoubard	1131:692ddf04fc42	350	public:
vcoubard	1131:692ddf04fc42	351	/**
vcoubard	1131:692ddf04fc42	352	* Set the BTLE MAC address and type. Please note that the address format is
vcoubard	1135:22aada733dbd	353	* least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
vcoubard	1131:692ddf04fc42	354	*
vcoubard	1183:1589830dbdb7	355	* @param[in] type
vcoubard	1183:1589830dbdb7	356	* The type of the BLE address to set.
vcoubard	1183:1589830dbdb7	357	* @param[in] address
vcoubard	1183:1589830dbdb7	358	* The BLE address to set.
vcoubard	1183:1589830dbdb7	359	*
vcoubard	1131:692ddf04fc42	360	* @return BLE_ERROR_NONE on success.
vcoubard	1131:692ddf04fc42	361	*/
vcoubard	1135:22aada733dbd	362	virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard	1131:692ddf04fc42	363	/* avoid compiler warnings about unused variables */
vcoubard	1131:692ddf04fc42	364	(void)type;
vcoubard	1131:692ddf04fc42	365	(void)address;
vcoubard	1131:692ddf04fc42	366
vcoubard	1131:692ddf04fc42	367	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	368	}
vcoubard	1131:692ddf04fc42	369
vcoubard	1131:692ddf04fc42	370	/**
vcoubard	1131:692ddf04fc42	371	* Fetch the BTLE MAC address and type.
vcoubard	1131:692ddf04fc42	372	*
vcoubard	1183:1589830dbdb7	373	* @param[out] typeP
vcoubard	1183:1589830dbdb7	374	* The current BLE address type.
vcoubard	1183:1589830dbdb7	375	* @param[out] address
vcoubard	1183:1589830dbdb7	376	* The current BLE address.
vcoubard	1183:1589830dbdb7	377	*
vcoubard	1131:692ddf04fc42	378	* @return BLE_ERROR_NONE on success.
vcoubard	1131:692ddf04fc42	379	*/
vcoubard	1135:22aada733dbd	380	virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard	1131:692ddf04fc42	381	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	382	(void)typeP;
vcoubard	1131:692ddf04fc42	383	(void)address;
vcoubard	1131:692ddf04fc42	384
vcoubard	1131:692ddf04fc42	385	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	386	}
vcoubard	1131:692ddf04fc42	387
vcoubard	1131:692ddf04fc42	388	/**
vcoubard	1183:1589830dbdb7	389	* Get the minimum advertising interval in milliseconds for connectable
vcoubard	1183:1589830dbdb7	390	* undirected and connectable directed event types supported by the
vcoubard	1183:1589830dbdb7	391	* underlying BLE stack.
vcoubard	1183:1589830dbdb7	392	*
vcoubard	1134:d540a48f650d	393	* @return Minimum Advertising interval in milliseconds for connectable
vcoubard	1183:1589830dbdb7	394	* undirected and connectable directed event types.
vcoubard	1131:692ddf04fc42	395	*/
vcoubard	1131:692ddf04fc42	396	virtual uint16_t getMinAdvertisingInterval(void) const {
vcoubard	1131:692ddf04fc42	397	return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	398	}
vcoubard	1131:692ddf04fc42	399
vcoubard	1131:692ddf04fc42	400	/**
vcoubard	1183:1589830dbdb7	401	* Get the minimum advertising interval in milliseconds for scannable
vcoubard	1183:1589830dbdb7	402	* undirected and non-connectable undirected even types supported by the
vcoubard	1183:1589830dbdb7	403	* underlying BLE stack.
vcoubard	1183:1589830dbdb7	404	*
vcoubard	1134:d540a48f650d	405	* @return Minimum Advertising interval in milliseconds for scannable
vcoubard	1183:1589830dbdb7	406	* undirected and non-connectable undirected event types.
vcoubard	1131:692ddf04fc42	407	*/
vcoubard	1131:692ddf04fc42	408	virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard	1131:692ddf04fc42	409	return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	410	}
vcoubard	1131:692ddf04fc42	411
vcoubard	1131:692ddf04fc42	412	/**
vcoubard	1183:1589830dbdb7	413	* Get the maximum advertising interval in milliseconds for all event types
vcoubard	1183:1589830dbdb7	414	* supported by the underlying BLE stack.
vcoubard	1183:1589830dbdb7	415	*
vcoubard	1131:692ddf04fc42	416	* @return Maximum Advertising interval in milliseconds.
vcoubard	1131:692ddf04fc42	417	*/
vcoubard	1131:692ddf04fc42	418	virtual uint16_t getMaxAdvertisingInterval(void) const {
vcoubard	1131:692ddf04fc42	419	return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	420	}
vcoubard	1131:692ddf04fc42	421
vcoubard	1183:1589830dbdb7	422	/**
vcoubard	1183:1589830dbdb7	423	* Stop advertising. The current advertising parameters remain in effect.
vcoubard	1183:1589830dbdb7	424	*
vcoubard	1183:1589830dbdb7	425	* @retval BLE_ERROR_NONE if successfully stopped advertising procedure.
vcoubard	1183:1589830dbdb7	426	*/
vcoubard	1131:692ddf04fc42	427	virtual ble_error_t stopAdvertising(void) {
vcoubard	1131:692ddf04fc42	428	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	429	}
vcoubard	1131:692ddf04fc42	430
vcoubard	1131:692ddf04fc42	431	/**
vcoubard	1131:692ddf04fc42	432	* Stop scanning. The current scanning parameters remain in effect.
vcoubard	1131:692ddf04fc42	433	*
vcoubard	1131:692ddf04fc42	434	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard	1131:692ddf04fc42	435	*/
vcoubard	1131:692ddf04fc42	436	virtual ble_error_t stopScan() {
vcoubard	1131:692ddf04fc42	437	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	438	}
vcoubard	1131:692ddf04fc42	439
vcoubard	1131:692ddf04fc42	440	/**
vcoubard	1131:692ddf04fc42	441	* Create a connection (GAP Link Establishment).
vcoubard	1131:692ddf04fc42	442	*
vcoubard	1183:1589830dbdb7	443	* @param[in] peerAddr
vcoubard	1183:1589830dbdb7	444	* 48-bit address, LSB format.
vcoubard	1183:1589830dbdb7	445	* @param[in] peerAddrType
vcoubard	1183:1589830dbdb7	446	* Address type of the peer.
vcoubard	1183:1589830dbdb7	447	* @param[in] connectionParams
vcoubard	1183:1589830dbdb7	448	* Connection parameters.
vcoubard	1183:1589830dbdb7	449	* @param[in] scanParams
vcoubard	1183:1589830dbdb7	450	* Paramters to be used while scanning for the peer.
vcoubard	1183:1589830dbdb7	451	*
vcoubard	1131:692ddf04fc42	452	* @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard	1183:1589830dbdb7	453	* successfully. The connectionCallChain (if set) will be invoked upon
vcoubard	1183:1589830dbdb7	454	* a connection event.
vcoubard	1131:692ddf04fc42	455	*/
vcoubard	1135:22aada733dbd	456	virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1135:22aada733dbd	457	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1135:22aada733dbd	458	const ConnectionParams_t *connectionParams,
vcoubard	1135:22aada733dbd	459	const GapScanningParams *scanParams) {
vcoubard	1131:692ddf04fc42	460	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	461	(void)peerAddr;
vcoubard	1131:692ddf04fc42	462	(void)peerAddrType;
vcoubard	1131:692ddf04fc42	463	(void)connectionParams;
vcoubard	1131:692ddf04fc42	464	(void)scanParams;
vcoubard	1131:692ddf04fc42	465
vcoubard	1131:692ddf04fc42	466	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	467	}
vcoubard	1131:692ddf04fc42	468
vcoubard	1131:692ddf04fc42	469	/**
vcoubard	1135:22aada733dbd	470	* Create a connection (GAP Link Establishment).
vcoubard	1135:22aada733dbd	471	*
vcoubard	1183:1589830dbdb7	472	* @deprecated This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
vcoubard	1183:1589830dbdb7	473	* BLEProtocol::AddressType_t peerAddrType,
vcoubard	1183:1589830dbdb7	474	* const ConnectionParams_t *connectionParams,
vcoubard	1183:1589830dbdb7	475	* const GapScanningParams *scanParams)
vcoubard	1183:1589830dbdb7	476	* to maintain backward compatibility for change from Gap::AddressType_t to
vcoubard	1183:1589830dbdb7	477	* BLEProtocol::AddressType_t.
vcoubard	1135:22aada733dbd	478	*/
vcoubard	1135:22aada733dbd	479	ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1135:22aada733dbd	480	DeprecatedAddressType_t peerAddrType,
vcoubard	1135:22aada733dbd	481	const ConnectionParams_t *connectionParams,
vcoubard	1135:22aada733dbd	482	const GapScanningParams *scanParams)
vcoubard	1135:22aada733dbd	483	__deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
vcoubard	1135:22aada733dbd	484	return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
vcoubard	1135:22aada733dbd	485	}
vcoubard	1135:22aada733dbd	486
vcoubard	1135:22aada733dbd	487	/**
vcoubard	1131:692ddf04fc42	488	* This call initiates the disconnection procedure, and its completion will
vcoubard	1131:692ddf04fc42	489	* be communicated to the application with an invocation of the
vcoubard	1131:692ddf04fc42	490	* disconnectionCallback.
vcoubard	1131:692ddf04fc42	491	*
vcoubard	1183:1589830dbdb7	492	* @param[in] reason
vcoubard	1183:1589830dbdb7	493	* The reason for disconnection; to be sent back to the peer.
vcoubard	1183:1589830dbdb7	494	* @param[in] connectionHandle
vcoubard	1183:1589830dbdb7	495	* The handle of the connection to disconnect from.
vcoubard	1183:1589830dbdb7	496	*
vcoubard	1183:1589830dbdb7	497	* @return BLE_ERROR_NONE if disconnection was successful.
vcoubard	1131:692ddf04fc42	498	*/
vcoubard	1131:692ddf04fc42	499	virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
vcoubard	1131:692ddf04fc42	500	/* avoid compiler warnings about unused variables */
vcoubard	1131:692ddf04fc42	501	(void)connectionHandle;
vcoubard	1131:692ddf04fc42	502	(void)reason;
vcoubard	1131:692ddf04fc42	503
vcoubard	1131:692ddf04fc42	504	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	505	}
vcoubard	1131:692ddf04fc42	506
vcoubard	1131:692ddf04fc42	507	/**
vcoubard	1131:692ddf04fc42	508	* This call initiates the disconnection procedure, and its completion will
vcoubard	1131:692ddf04fc42	509	* be communicated to the application with an invocation of the
vcoubard	1131:692ddf04fc42	510	* disconnectionCallback.
vcoubard	1131:692ddf04fc42	511	*
vcoubard	1183:1589830dbdb7	512	* @param[in] reason
vcoubard	1183:1589830dbdb7	513	* The reason for disconnection; to be sent back to the peer.
vcoubard	1183:1589830dbdb7	514	*
vcoubard	1183:1589830dbdb7	515	* @return BLE_ERROR_NONE if disconnection was successful.
vcoubard	1131:692ddf04fc42	516	*
vcoubard	1183:1589830dbdb7	517	* @deprecated This version of disconnect() doesn't take a connection handle. It
vcoubard	1183:1589830dbdb7	518	* works reliably only for stacks that are limited to a single
vcoubard	1183:1589830dbdb7	519	* connection. Use instead Gap::disconnect(Handle_t connectionHandle,
vcoubard	1183:1589830dbdb7	520	* DisconnectionReason_t reason) instead.
vcoubard	1131:692ddf04fc42	521	*/
vcoubard	1131:692ddf04fc42	522	virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard	1131:692ddf04fc42	523	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	524	(void)reason;
vcoubard	1131:692ddf04fc42	525
vcoubard	1131:692ddf04fc42	526	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	527	}
vcoubard	1131:692ddf04fc42	528
vcoubard	1131:692ddf04fc42	529	/**
vcoubard	1131:692ddf04fc42	530	* Get the GAP peripheral preferred connection parameters. These are the
vcoubard	1131:692ddf04fc42	531	* defaults that the peripheral would like to have in a connection. The
vcoubard	1131:692ddf04fc42	532	* choice of the connection parameters is eventually up to the central.
vcoubard	1131:692ddf04fc42	533	*
vcoubard	1131:692ddf04fc42	534	* @param[out] params
vcoubard	1131:692ddf04fc42	535	* The structure where the parameters will be stored. Memory
vcoubard	1131:692ddf04fc42	536	* for this is owned by the caller.
vcoubard	1131:692ddf04fc42	537	*
vcoubard	1131:692ddf04fc42	538	* @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard	1183:1589830dbdb7	539	* the given structure pointed to by params.
vcoubard	1131:692ddf04fc42	540	*/
vcoubard	1131:692ddf04fc42	541	virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard	1131:692ddf04fc42	542	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	543	(void)params;
vcoubard	1131:692ddf04fc42	544
vcoubard	1131:692ddf04fc42	545	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	546	}
vcoubard	1131:692ddf04fc42	547
vcoubard	1131:692ddf04fc42	548	/**
vcoubard	1131:692ddf04fc42	549	* Set the GAP peripheral preferred connection parameters. These are the
vcoubard	1131:692ddf04fc42	550	* defaults that the peripheral would like to have in a connection. The
vcoubard	1131:692ddf04fc42	551	* choice of the connection parameters is eventually up to the central.
vcoubard	1131:692ddf04fc42	552	*
vcoubard	1131:692ddf04fc42	553	* @param[in] params
vcoubard	1131:692ddf04fc42	554	* The structure containing the desired parameters.
vcoubard	1183:1589830dbdb7	555	*
vcoubard	1183:1589830dbdb7	556	* @return BLE_ERROR_NONE if the preferred connection params were set
vcoubard	1183:1589830dbdb7	557	* correctly.
vcoubard	1131:692ddf04fc42	558	*/
vcoubard	1131:692ddf04fc42	559	virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard	1131:692ddf04fc42	560	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	561	(void)params;
vcoubard	1131:692ddf04fc42	562
vcoubard	1131:692ddf04fc42	563	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	564	}
vcoubard	1131:692ddf04fc42	565
vcoubard	1131:692ddf04fc42	566	/**
vcoubard	1183:1589830dbdb7	567	* Update connection parameters. In the central role this will initiate a
vcoubard	1183:1589830dbdb7	568	* Link Layer connection parameter update procedure. In the peripheral role,
vcoubard	1183:1589830dbdb7	569	* this will send the corresponding L2CAP request and wait for the central
vcoubard	1183:1589830dbdb7	570	* to perform the procedure.
vcoubard	1131:692ddf04fc42	571	*
vcoubard	1131:692ddf04fc42	572	* @param[in] handle
vcoubard	1131:692ddf04fc42	573	* Connection Handle.
vcoubard	1131:692ddf04fc42	574	* @param[in] params
vcoubard	1131:692ddf04fc42	575	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard	1131:692ddf04fc42	576	* the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard	1183:1589830dbdb7	577	*
vcoubard	1183:1589830dbdb7	578	* @return BLE_ERROR_NONE if the connection parameters were updated correctly.
vcoubard	1131:692ddf04fc42	579	*/
vcoubard	1131:692ddf04fc42	580	virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
vcoubard	1131:692ddf04fc42	581	/* avoid compiler warnings about unused variables */
vcoubard	1131:692ddf04fc42	582	(void)handle;
vcoubard	1131:692ddf04fc42	583	(void)params;
vcoubard	1131:692ddf04fc42	584
vcoubard	1131:692ddf04fc42	585	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	586	}
vcoubard	1131:692ddf04fc42	587
vcoubard	1131:692ddf04fc42	588	/**
vcoubard	1131:692ddf04fc42	589	* Set the device name characteristic in the GAP service.
vcoubard	1183:1589830dbdb7	590	*
vcoubard	1131:692ddf04fc42	591	* @param[in] deviceName
vcoubard	1131:692ddf04fc42	592	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard	1183:1589830dbdb7	593	*
vcoubard	1183:1589830dbdb7	594	* @return BLE_ERROR_NONE if the device name was set correctly.
vcoubard	1131:692ddf04fc42	595	*/
vcoubard	1131:692ddf04fc42	596	virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard	1131:692ddf04fc42	597	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	598	(void)deviceName;
vcoubard	1131:692ddf04fc42	599
vcoubard	1131:692ddf04fc42	600	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	601	}
vcoubard	1131:692ddf04fc42	602
vcoubard	1131:692ddf04fc42	603	/**
vcoubard	1131:692ddf04fc42	604	* Get the value of the device name characteristic in the GAP service.
vcoubard	1183:1589830dbdb7	605	*
vcoubard	1131:692ddf04fc42	606	* @param[out] deviceName
vcoubard	1131:692ddf04fc42	607	* Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard	1131:692ddf04fc42	608	* terminated* string will be placed. Set this
vcoubard	1131:692ddf04fc42	609	* value to NULL in order to obtain the deviceName-length
vcoubard	1131:692ddf04fc42	610	* from the 'length' parameter.
vcoubard	1131:692ddf04fc42	611	*
vcoubard	1183:1589830dbdb7	612	* @param[in,out] lengthP
vcoubard	1131:692ddf04fc42	613	* (on input) Length of the buffer pointed to by deviceName;
vcoubard	1131:692ddf04fc42	614	* (on output) the complete device name length (without the
vcoubard	1131:692ddf04fc42	615	* null terminator).
vcoubard	1131:692ddf04fc42	616	*
vcoubard	1183:1589830dbdb7	617	* @return BLE_ERROR_NONE if the device name was fetched correctly from the
vcoubard	1183:1589830dbdb7	618	* underlying BLE stack.
vcoubard	1183:1589830dbdb7	619	*
vcoubard	1131:692ddf04fc42	620	* @note If the device name is longer than the size of the supplied buffer,
vcoubard	1183:1589830dbdb7	621	* length will return the complete device name length, and not the
vcoubard	1183:1589830dbdb7	622	* number of bytes actually returned in deviceName. The application may
vcoubard	1183:1589830dbdb7	623	* use this information to retry with a suitable buffer size.
vcoubard	1131:692ddf04fc42	624	*/
vcoubard	1131:692ddf04fc42	625	virtual ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
vcoubard	1131:692ddf04fc42	626	/* avoid compiler warnings about unused variables */
vcoubard	1131:692ddf04fc42	627	(void)deviceName;
vcoubard	1131:692ddf04fc42	628	(void)lengthP;
vcoubard	1131:692ddf04fc42	629
vcoubard	1131:692ddf04fc42	630	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	631	}
vcoubard	1131:692ddf04fc42	632
vcoubard	1131:692ddf04fc42	633	/**
vcoubard	1131:692ddf04fc42	634	* Set the appearance characteristic in the GAP service.
vcoubard	1183:1589830dbdb7	635	*
vcoubard	1131:692ddf04fc42	636	* @param[in] appearance
vcoubard	1131:692ddf04fc42	637	* The new value for the device-appearance.
vcoubard	1183:1589830dbdb7	638	*
vcoubard	1183:1589830dbdb7	639	* @return BLE_ERROR_NONE if the new appearance was set correctly.
vcoubard	1131:692ddf04fc42	640	*/
vcoubard	1131:692ddf04fc42	641	virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard	1131:692ddf04fc42	642	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	643	(void)appearance;
vcoubard	1131:692ddf04fc42	644
vcoubard	1131:692ddf04fc42	645	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	646	}
vcoubard	1131:692ddf04fc42	647
vcoubard	1131:692ddf04fc42	648	/**
vcoubard	1131:692ddf04fc42	649	* Get the appearance characteristic in the GAP service.
vcoubard	1183:1589830dbdb7	650	*
vcoubard	1131:692ddf04fc42	651	* @param[out] appearance
vcoubard	1183:1589830dbdb7	652	* The current device-appearance value.
vcoubard	1183:1589830dbdb7	653	*
vcoubard	1183:1589830dbdb7	654	* @return BLE_ERROR_NONE if the device-appearance was fetched correctly
vcoubard	1183:1589830dbdb7	655	* from the underlying BLE stack.
vcoubard	1131:692ddf04fc42	656	*/
vcoubard	1131:692ddf04fc42	657	virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard	1131:692ddf04fc42	658	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	659	(void)appearanceP;
vcoubard	1131:692ddf04fc42	660
vcoubard	1131:692ddf04fc42	661	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	662	}
vcoubard	1131:692ddf04fc42	663
vcoubard	1131:692ddf04fc42	664	/**
vcoubard	1131:692ddf04fc42	665	* Set the radio's transmit power.
vcoubard	1183:1589830dbdb7	666	*
vcoubard	1183:1589830dbdb7	667	* @param[in] txPower
vcoubard	1183:1589830dbdb7	668	* Radio's transmit power in dBm.
vcoubard	1183:1589830dbdb7	669	*
vcoubard	1183:1589830dbdb7	670	* @return BLE_ERROR_NONE if the new radio's transmit power was set
vcoubard	1183:1589830dbdb7	671	* correctly.
vcoubard	1131:692ddf04fc42	672	*/
vcoubard	1131:692ddf04fc42	673	virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard	1131:692ddf04fc42	674	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	675	(void)txPower;
vcoubard	1131:692ddf04fc42	676
vcoubard	1131:692ddf04fc42	677	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	678	}
vcoubard	1131:692ddf04fc42	679
vcoubard	1131:692ddf04fc42	680	/**
vcoubard	1131:692ddf04fc42	681	* Query the underlying stack for permitted arguments for setTxPower().
vcoubard	1131:692ddf04fc42	682	*
vcoubard	1131:692ddf04fc42	683	* @param[out] valueArrayPP
vcoubard	1131:692ddf04fc42	684	* Out parameter to receive the immutable array of Tx values.
vcoubard	1131:692ddf04fc42	685	* @param[out] countP
vcoubard	1131:692ddf04fc42	686	* Out parameter to receive the array's size.
vcoubard	1131:692ddf04fc42	687	*/
vcoubard	1131:692ddf04fc42	688	virtual void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
vcoubard	1131:692ddf04fc42	689	/* Avoid compiler warnings about unused variables. */
vcoubard	1131:692ddf04fc42	690	(void)valueArrayPP;
vcoubard	1131:692ddf04fc42	691	(void)countP;
vcoubard	1131:692ddf04fc42	692
vcoubard	1131:692ddf04fc42	693	countP = 0; / Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	694	}
vcoubard	1131:692ddf04fc42	695
vcoubard	1135:22aada733dbd	696	/**
vcoubard	1183:1589830dbdb7	697	* Get the maximum size of the whitelist.
vcoubard	1183:1589830dbdb7	698	*
vcoubard	1135:22aada733dbd	699	* @return Maximum size of the whitelist.
vcoubard	1135:22aada733dbd	700	*
vcoubard	1183:1589830dbdb7	701	* @note If using mbed OS the size of the whitelist can be configured by
vcoubard	1183:1589830dbdb7	702	* setting the YOTTA_CFG_WHITELIST_MAX_SIZE macro in your yotta
vcoubard	1183:1589830dbdb7	703	* config file.
vcoubard	1183:1589830dbdb7	704	*
vcoubard	1135:22aada733dbd	705	* @experimental
vcoubard	1135:22aada733dbd	706	*/
vcoubard	1135:22aada733dbd	707	virtual uint8_t getMaxWhitelistSize(void) const
vcoubard	1135:22aada733dbd	708	{
vcoubard	1135:22aada733dbd	709	return 0;
vcoubard	1135:22aada733dbd	710	}
vcoubard	1135:22aada733dbd	711
vcoubard	1135:22aada733dbd	712	/**
vcoubard	1135:22aada733dbd	713	* Get the internal whitelist to be used by the Link Layer when scanning,
vcoubard	1135:22aada733dbd	714	* advertising or initiating a connection depending on the filter policies.
vcoubard	1135:22aada733dbd	715	*
vcoubard	1183:1589830dbdb7	716	* @param[in,out] whitelist
vcoubard	1135:22aada733dbd	717	* (on input) whitelist.capacity contains the maximum number
vcoubard	1135:22aada733dbd	718	* of addresses to be returned.
vcoubard	1135:22aada733dbd	719	* (on output) The populated whitelist with copies of the
vcoubard	1135:22aada733dbd	720	* addresses in the implementation's whitelist.
vcoubard	1135:22aada733dbd	721	*
vcoubard	1135:22aada733dbd	722	* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard	1135:22aada733dbd	723	* copied into the supplied reference.
vcoubard	1135:22aada733dbd	724	*
vcoubard	1135:22aada733dbd	725	* @experimental
vcoubard	1135:22aada733dbd	726	*/
vcoubard	1135:22aada733dbd	727	virtual ble_error_t getWhitelist(Whitelist_t &whitelist) const
vcoubard	1135:22aada733dbd	728	{
vcoubard	1135:22aada733dbd	729	(void) whitelist;
vcoubard	1135:22aada733dbd	730	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1135:22aada733dbd	731	}
vcoubard	1135:22aada733dbd	732
vcoubard	1135:22aada733dbd	733	/**
vcoubard	1135:22aada733dbd	734	* Set the internal whitelist to be used by the Link Layer when scanning,
vcoubard	1135:22aada733dbd	735	* advertising or initiating a connection depending on the filter policies.
vcoubard	1135:22aada733dbd	736	*
vcoubard	1135:22aada733dbd	737	* @param[in] whitelist
vcoubard	1135:22aada733dbd	738	* A reference to a whitelist containing the addresses to
vcoubard	1135:22aada733dbd	739	* be added to the internal whitelist.
vcoubard	1135:22aada733dbd	740	*
vcoubard	1135:22aada733dbd	741	* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard	1135:22aada733dbd	742	* populated with the addresses in the given whitelist.
vcoubard	1135:22aada733dbd	743	*
vcoubard	1135:22aada733dbd	744	* @note The whitelist must not contain addresses of type @ref
vcoubard	1135:22aada733dbd	745	* BLEProtocol::AddressType_t::RANDOM_PRIVATE_NON_RESOLVABLE, this
vcoubard	1135:22aada733dbd	746	* this will result in a @ref BLE_ERROR_INVALID_PARAM since the
vcoubard	1135:22aada733dbd	747	* remote peer might change its private address at any time and it
vcoubard	1135:22aada733dbd	748	* is not possible to resolve it.
vcoubard	1135:22aada733dbd	749	* @note If the input whitelist is larger than @ref getMaxWhitelistSize()
vcoubard	1135:22aada733dbd	750	* the @ref BLE_ERROR_PARAM_OUT_OF_RANGE is returned.
vcoubard	1135:22aada733dbd	751	*
vcoubard	1135:22aada733dbd	752	* @experimental
vcoubard	1135:22aada733dbd	753	*/
vcoubard	1135:22aada733dbd	754	virtual ble_error_t setWhitelist(const Whitelist_t &whitelist)
vcoubard	1135:22aada733dbd	755	{
vcoubard	1135:22aada733dbd	756	(void) whitelist;
vcoubard	1135:22aada733dbd	757	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1135:22aada733dbd	758	}
vcoubard	1135:22aada733dbd	759
vcoubard	1135:22aada733dbd	760	/**
vcoubard	1135:22aada733dbd	761	* Set the advertising policy filter mode to be used in the next call
vcoubard	1135:22aada733dbd	762	* to startAdvertising().
vcoubard	1135:22aada733dbd	763	*
vcoubard	1135:22aada733dbd	764	* @param[in] mode
vcoubard	1135:22aada733dbd	765	* The new advertising policy filter mode.
vcoubard	1135:22aada733dbd	766	*
vcoubard	1135:22aada733dbd	767	* @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard	1135:22aada733dbd	768	* successfully.
vcoubard	1135:22aada733dbd	769	*
vcoubard	1135:22aada733dbd	770	* @experimental
vcoubard	1135:22aada733dbd	771	*/
vcoubard	1135:22aada733dbd	772	virtual ble_error_t setAdvertisingPolicyMode(AdvertisingPolicyMode_t mode)
vcoubard	1135:22aada733dbd	773	{
vcoubard	1135:22aada733dbd	774	(void) mode;
vcoubard	1135:22aada733dbd	775	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1135:22aada733dbd	776	}
vcoubard	1135:22aada733dbd	777
vcoubard	1135:22aada733dbd	778	/**
vcoubard	1135:22aada733dbd	779	* Set the scan policy filter mode to be used in the next call
vcoubard	1135:22aada733dbd	780	* to startScan().
vcoubard	1135:22aada733dbd	781	*
vcoubard	1135:22aada733dbd	782	* @param[in] mode
vcoubard	1135:22aada733dbd	783	* The new scan policy filter mode.
vcoubard	1135:22aada733dbd	784	*
vcoubard	1135:22aada733dbd	785	* @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard	1135:22aada733dbd	786	* successfully.
vcoubard	1135:22aada733dbd	787	*
vcoubard	1135:22aada733dbd	788	* @experimental
vcoubard	1135:22aada733dbd	789	*/
vcoubard	1135:22aada733dbd	790	virtual ble_error_t setScanningPolicyMode(ScanningPolicyMode_t mode)
vcoubard	1135:22aada733dbd	791	{
vcoubard	1135:22aada733dbd	792	(void) mode;
vcoubard	1135:22aada733dbd	793	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1135:22aada733dbd	794	}
vcoubard	1135:22aada733dbd	795
vcoubard	1135:22aada733dbd	796	/**
vcoubard	1135:22aada733dbd	797	* Set the initiator policy filter mode to be used.
vcoubard	1135:22aada733dbd	798	*
vcoubard	1135:22aada733dbd	799	* @param[in] mode
vcoubard	1135:22aada733dbd	800	* The new initiator policy filter mode.
vcoubard	1135:22aada733dbd	801	*
vcoubard	1135:22aada733dbd	802	* @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard	1135:22aada733dbd	803	* successfully.
vcoubard	1135:22aada733dbd	804	*
vcoubard	1135:22aada733dbd	805	* @experimental
vcoubard	1135:22aada733dbd	806	*/
vcoubard	1135:22aada733dbd	807	virtual ble_error_t setInitiatorPolicyMode(InitiatorPolicyMode_t mode)
vcoubard	1135:22aada733dbd	808	{
vcoubard	1135:22aada733dbd	809	(void) mode;
vcoubard	1135:22aada733dbd	810	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1135:22aada733dbd	811	}
vcoubard	1135:22aada733dbd	812
vcoubard	1135:22aada733dbd	813	/**
vcoubard	1135:22aada733dbd	814	* Get the advertising policy filter mode that will be used in the next
vcoubard	1135:22aada733dbd	815	* call to startAdvertising().
vcoubard	1135:22aada733dbd	816	*
vcoubard	1135:22aada733dbd	817	* @return The set advertising policy filter mode.
vcoubard	1135:22aada733dbd	818	*
vcoubard	1135:22aada733dbd	819	* @experimental
vcoubard	1135:22aada733dbd	820	*/
vcoubard	1135:22aada733dbd	821	virtual AdvertisingPolicyMode_t getAdvertisingPolicyMode(void) const
vcoubard	1135:22aada733dbd	822	{
vcoubard	1135:22aada733dbd	823	return ADV_POLICY_IGNORE_WHITELIST;
vcoubard	1135:22aada733dbd	824	}
vcoubard	1135:22aada733dbd	825
vcoubard	1135:22aada733dbd	826	/**
vcoubard	1135:22aada733dbd	827	* Get the scan policy filter mode that will be used in the next
vcoubard	1135:22aada733dbd	828	* call to startScan().
vcoubard	1135:22aada733dbd	829	*
vcoubard	1135:22aada733dbd	830	* @return The set scan policy filter mode.
vcoubard	1135:22aada733dbd	831	*
vcoubard	1135:22aada733dbd	832	* @experimental
vcoubard	1135:22aada733dbd	833	*/
vcoubard	1135:22aada733dbd	834	virtual ScanningPolicyMode_t getScanningPolicyMode(void) const
vcoubard	1135:22aada733dbd	835	{
vcoubard	1135:22aada733dbd	836	return SCAN_POLICY_IGNORE_WHITELIST;
vcoubard	1135:22aada733dbd	837	}
vcoubard	1135:22aada733dbd	838
vcoubard	1135:22aada733dbd	839	/**
vcoubard	1135:22aada733dbd	840	* Get the initiator policy filter mode that will be used.
vcoubard	1135:22aada733dbd	841	*
vcoubard	1135:22aada733dbd	842	* @return The set scan policy filter mode.
vcoubard	1135:22aada733dbd	843	*
vcoubard	1135:22aada733dbd	844	* @experimental
vcoubard	1135:22aada733dbd	845	*/
vcoubard	1135:22aada733dbd	846	virtual InitiatorPolicyMode_t getInitiatorPolicyMode(void) const
vcoubard	1135:22aada733dbd	847	{
vcoubard	1135:22aada733dbd	848	return INIT_POLICY_IGNORE_WHITELIST;
vcoubard	1135:22aada733dbd	849	}
vcoubard	1135:22aada733dbd	850
vcoubard	1131:692ddf04fc42	851	protected:
vcoubard	1131:692ddf04fc42	852	/* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
vcoubard	1183:1589830dbdb7	853
vcoubard	1183:1589830dbdb7	854	/**
vcoubard	1183:1589830dbdb7	855	* Start scanning procedure in the underlying BLE stack.
vcoubard	1183:1589830dbdb7	856	*
vcoubard	1183:1589830dbdb7	857	* @param[in] scanningParams
vcoubard	1183:1589830dbdb7	858	* The GAP scanning parameters.
vcoubard	1183:1589830dbdb7	859	*
vcoubard	1183:1589830dbdb7	860	* @return BLE_ERROR_NONE if the scan procedure started successfully.
vcoubard	1183:1589830dbdb7	861	*/
vcoubard	1131:692ddf04fc42	862	virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
vcoubard	1131:692ddf04fc42	863	(void)scanningParams;
vcoubard	1131:692ddf04fc42	864	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	865	}
vcoubard	1131:692ddf04fc42	866
vcoubard	1131:692ddf04fc42	867	/*
vcoubard	1131:692ddf04fc42	868	* APIs with non-virtual implementations.
vcoubard	1131:692ddf04fc42	869	*/
vcoubard	1131:692ddf04fc42	870	public:
vcoubard	1131:692ddf04fc42	871	/**
vcoubard	1183:1589830dbdb7	872	* Get the current GAP state of the device using a bitmask that
vcoubard	1131:692ddf04fc42	873	* describes whether the device is advertising or connected.
vcoubard	1183:1589830dbdb7	874	*
vcoubard	1183:1589830dbdb7	875	* @return The current GAP state of the device.
vcoubard	1131:692ddf04fc42	876	*/
vcoubard	1131:692ddf04fc42	877	GapState_t getState(void) const {
vcoubard	1131:692ddf04fc42	878	return state;
vcoubard	1131:692ddf04fc42	879	}
vcoubard	1131:692ddf04fc42	880
vcoubard	1131:692ddf04fc42	881	/**
vcoubard	1131:692ddf04fc42	882	* Set the GAP advertising mode to use for this device.
vcoubard	1183:1589830dbdb7	883	*
vcoubard	1183:1589830dbdb7	884	* @param[in] advType
vcoubard	1183:1589830dbdb7	885	* The new type of the advertising packets.
vcoubard	1131:692ddf04fc42	886	*/
vcoubard	1131:692ddf04fc42	887	void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
vcoubard	1131:692ddf04fc42	888	_advParams.setAdvertisingType(advType);
vcoubard	1131:692ddf04fc42	889	}
vcoubard	1131:692ddf04fc42	890
vcoubard	1131:692ddf04fc42	891	/**
vcoubard	1183:1589830dbdb7	892	* Set the advertising interval.
vcoubard	1183:1589830dbdb7	893	*
vcoubard	1131:692ddf04fc42	894	* @param[in] interval
vcoubard	1131:692ddf04fc42	895	* Advertising interval in units of milliseconds. Advertising
vcoubard	1131:692ddf04fc42	896	* is disabled if interval is 0. If interval is smaller than
vcoubard	1131:692ddf04fc42	897	* the minimum supported value, then the minimum supported
vcoubard	1131:692ddf04fc42	898	* value is used instead. This minimum value can be discovered
vcoubard	1131:692ddf04fc42	899	* using getMinAdvertisingInterval().
vcoubard	1131:692ddf04fc42	900	*
vcoubard	1131:692ddf04fc42	901	* This field must be set to 0 if connectionMode is equal
vcoubard	1131:692ddf04fc42	902	* to ADV_CONNECTABLE_DIRECTED.
vcoubard	1131:692ddf04fc42	903	*
vcoubard	1183:1589830dbdb7	904	* @note Decreasing this value will allow central devices to detect a
vcoubard	1183:1589830dbdb7	905	* peripheral faster, at the expense of more power being used by the radio
vcoubard	1183:1589830dbdb7	906	* due to the higher data transmit rate.
vcoubard	1131:692ddf04fc42	907	*
vcoubard	1183:1589830dbdb7	908	* @note [WARNING] This API previously used 0.625ms as the unit for its
vcoubard	1183:1589830dbdb7	909	* @p interval argument. That required an explicit conversion from
vcoubard	1183:1589830dbdb7	910	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard	1183:1589830dbdb7	911	* no longer required as the new units are milliseconds. Any application
vcoubard	1183:1589830dbdb7	912	* code depending on the old semantics needs to be updated accordingly.
vcoubard	1131:692ddf04fc42	913	*/
vcoubard	1131:692ddf04fc42	914	void setAdvertisingInterval(uint16_t interval) {
vcoubard	1131:692ddf04fc42	915	if (interval == 0) {
vcoubard	1131:692ddf04fc42	916	stopAdvertising();
vcoubard	1131:692ddf04fc42	917	} else if (interval < getMinAdvertisingInterval()) {
vcoubard	1131:692ddf04fc42	918	interval = getMinAdvertisingInterval();
vcoubard	1131:692ddf04fc42	919	}
vcoubard	1131:692ddf04fc42	920	_advParams.setInterval(interval);
vcoubard	1131:692ddf04fc42	921	}
vcoubard	1131:692ddf04fc42	922
vcoubard	1131:692ddf04fc42	923	/**
vcoubard	1183:1589830dbdb7	924	* Set the advertising timeout. The length of time to advertise for before
vcoubard	1183:1589830dbdb7	925	* a timeout event is generated.
vcoubard	1183:1589830dbdb7	926	*
vcoubard	1131:692ddf04fc42	927	* @param[in] timeout
vcoubard	1131:692ddf04fc42	928	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard	1131:692ddf04fc42	929	* and 16383). Use 0 to disable the advertising timeout.
vcoubard	1131:692ddf04fc42	930	*/
vcoubard	1131:692ddf04fc42	931	void setAdvertisingTimeout(uint16_t timeout) {
vcoubard	1131:692ddf04fc42	932	_advParams.setTimeout(timeout);
vcoubard	1131:692ddf04fc42	933	}
vcoubard	1131:692ddf04fc42	934
vcoubard	1131:692ddf04fc42	935	/**
vcoubard	1131:692ddf04fc42	936	* Start advertising.
vcoubard	1183:1589830dbdb7	937	*
vcoubard	1183:1589830dbdb7	938	* @return BLE_ERROR_NONE if the device started advertising successfully.
vcoubard	1131:692ddf04fc42	939	*/
vcoubard	1131:692ddf04fc42	940	ble_error_t startAdvertising(void) {
vcoubard	1186:61ac7e01586f	941	return startAdvertising(_advParams);
vcoubard	1131:692ddf04fc42	942	}
vcoubard	1131:692ddf04fc42	943
vcoubard	1131:692ddf04fc42	944	/**
vcoubard	1131:692ddf04fc42	945	* Reset any advertising payload prepared from prior calls to
vcoubard	1131:692ddf04fc42	946	* accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard	1131:692ddf04fc42	947	* initialized advertising payload to the underlying stack.
vcoubard	1131:692ddf04fc42	948	*/
vcoubard	1131:692ddf04fc42	949	void clearAdvertisingPayload(void) {
vcoubard	1131:692ddf04fc42	950	_advPayload.clear();
vcoubard	1188:039621a96054	951	setAdvertisingData(_advPayload, _scanResponse);
vcoubard	1131:692ddf04fc42	952	}
vcoubard	1131:692ddf04fc42	953
vcoubard	1131:692ddf04fc42	954	/**
vcoubard	1131:692ddf04fc42	955	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1131:692ddf04fc42	956	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1131:692ddf04fc42	957	* as an additional 31 bytes if the advertising payload is too
vcoubard	1131:692ddf04fc42	958	* small.
vcoubard	1131:692ddf04fc42	959	*
vcoubard	1131:692ddf04fc42	960	* @param[in] flags
vcoubard	1131:692ddf04fc42	961	* The flags to be added. Please refer to
vcoubard	1131:692ddf04fc42	962	* GapAdvertisingData::Flags for valid flags. Multiple
vcoubard	1131:692ddf04fc42	963	* flags may be specified in combination.
vcoubard	1183:1589830dbdb7	964	*
vcoubard	1183:1589830dbdb7	965	* @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard	1183:1589830dbdb7	966	* advertising payload.
vcoubard	1131:692ddf04fc42	967	*/
vcoubard	1131:692ddf04fc42	968	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard	1188:039621a96054	969	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1131:692ddf04fc42	970	ble_error_t rc;
vcoubard	1188:039621a96054	971	if ((rc = advPayloadCopy.addFlags(flags)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	972	return rc;
vcoubard	1131:692ddf04fc42	973	}
vcoubard	1131:692ddf04fc42	974
vcoubard	1188:039621a96054	975	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1188:039621a96054	976	if (rc == BLE_ERROR_NONE) {
vcoubard	1188:039621a96054	977	_advPayload = advPayloadCopy;
vcoubard	1188:039621a96054	978	}
vcoubard	1188:039621a96054	979
vcoubard	1188:039621a96054	980	return rc;
vcoubard	1131:692ddf04fc42	981	}
vcoubard	1131:692ddf04fc42	982
vcoubard	1131:692ddf04fc42	983	/**
vcoubard	1131:692ddf04fc42	984	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1131:692ddf04fc42	985	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1131:692ddf04fc42	986	* as an additional 31 bytes if the advertising payload is too
vcoubard	1131:692ddf04fc42	987	* small.
vcoubard	1131:692ddf04fc42	988	*
vcoubard	1183:1589830dbdb7	989	* @param[in] app
vcoubard	1183:1589830dbdb7	990	* The appearance of the peripheral.
vcoubard	1183:1589830dbdb7	991	*
vcoubard	1183:1589830dbdb7	992	* @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard	1183:1589830dbdb7	993	* advertising payload.
vcoubard	1131:692ddf04fc42	994	*/
vcoubard	1131:692ddf04fc42	995	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard	1188:039621a96054	996	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1131:692ddf04fc42	997	ble_error_t rc;
vcoubard	1188:039621a96054	998	if ((rc = advPayloadCopy.addAppearance(app)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	999	return rc;
vcoubard	1131:692ddf04fc42	1000	}
vcoubard	1131:692ddf04fc42	1001
vcoubard	1188:039621a96054	1002	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1188:039621a96054	1003	if (rc == BLE_ERROR_NONE) {
vcoubard	1188:039621a96054	1004	_advPayload = advPayloadCopy;
vcoubard	1188:039621a96054	1005	}
vcoubard	1188:039621a96054	1006
vcoubard	1188:039621a96054	1007	return rc;
vcoubard	1131:692ddf04fc42	1008	}
vcoubard	1131:692ddf04fc42	1009
vcoubard	1131:692ddf04fc42	1010	/**
vcoubard	1131:692ddf04fc42	1011	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1131:692ddf04fc42	1012	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1131:692ddf04fc42	1013	* as an additional 31 bytes if the advertising payload is too
vcoubard	1131:692ddf04fc42	1014	* small.
vcoubard	1131:692ddf04fc42	1015	*
vcoubard	1183:1589830dbdb7	1016	* @param[in] power
vcoubard	1183:1589830dbdb7	1017	* The max transmit power to be used by the controller (in dBm).
vcoubard	1183:1589830dbdb7	1018	*
vcoubard	1183:1589830dbdb7	1019	* @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard	1183:1589830dbdb7	1020	* advertising payload.
vcoubard	1131:692ddf04fc42	1021	*/
vcoubard	1131:692ddf04fc42	1022	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard	1188:039621a96054	1023	if (power < -100 \|\| power > 20) {
vcoubard	1188:039621a96054	1024	return BLE_ERROR_PARAM_OUT_OF_RANGE;
vcoubard	1188:039621a96054	1025	}
vcoubard	1188:039621a96054	1026
vcoubard	1131:692ddf04fc42	1027	ble_error_t rc;
vcoubard	1131:692ddf04fc42	1028	if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1029	return rc;
vcoubard	1131:692ddf04fc42	1030	}
vcoubard	1131:692ddf04fc42	1031
vcoubard	1188:039621a96054	1032	return setAdvertisingData(_advPayload, _scanResponse);
vcoubard	1131:692ddf04fc42	1033	}
vcoubard	1131:692ddf04fc42	1034
vcoubard	1131:692ddf04fc42	1035	/**
vcoubard	1131:692ddf04fc42	1036	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1131:692ddf04fc42	1037	* advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard	1131:692ddf04fc42	1038	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard	1131:692ddf04fc42	1039	* advertising payload is too small.
vcoubard	1131:692ddf04fc42	1040	*
vcoubard	1183:1589830dbdb7	1041	* @param[in] type
vcoubard	1183:1589830dbdb7	1042	* The type describing the variable length data.
vcoubard	1183:1589830dbdb7	1043	* @param[in] data
vcoubard	1183:1589830dbdb7	1044	* Data bytes.
vcoubard	1183:1589830dbdb7	1045	* @param[in] len
vcoubard	1183:1589830dbdb7	1046	* Length of data.
vcoubard	1135:22aada733dbd	1047	*
vcoubard	1135:22aada733dbd	1048	* @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard	1135:22aada733dbd	1049	* matching AD type; otherwise, an appropriate error.
vcoubard	1135:22aada733dbd	1050	*
vcoubard	1135:22aada733dbd	1051	* @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
vcoubard	1135:22aada733dbd	1052	* COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
vcoubard	1135:22aada733dbd	1053	* COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
vcoubard	1135:22aada733dbd	1054	* COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
vcoubard	1135:22aada733dbd	1055	* supplied value is appended to the values previously added to the
vcoubard	1135:22aada733dbd	1056	* payload.
vcoubard	1131:692ddf04fc42	1057	*/
vcoubard	1131:692ddf04fc42	1058	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1188:039621a96054	1059	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1131:692ddf04fc42	1060	ble_error_t rc;
vcoubard	1188:039621a96054	1061	if ((rc = advPayloadCopy.addData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1062	return rc;
vcoubard	1131:692ddf04fc42	1063	}
vcoubard	1131:692ddf04fc42	1064
vcoubard	1188:039621a96054	1065	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1188:039621a96054	1066	if (rc == BLE_ERROR_NONE) {
vcoubard	1188:039621a96054	1067	_advPayload = advPayloadCopy;
vcoubard	1188:039621a96054	1068	}
vcoubard	1188:039621a96054	1069
vcoubard	1188:039621a96054	1070	return rc;
vcoubard	1131:692ddf04fc42	1071	}
vcoubard	1131:692ddf04fc42	1072
vcoubard	1131:692ddf04fc42	1073	/**
vcoubard	1131:692ddf04fc42	1074	* Update a particular ADV field in the advertising payload (based on
vcoubard	1135:22aada733dbd	1075	* matching type).
vcoubard	1131:692ddf04fc42	1076	*
vcoubard	1183:1589830dbdb7	1077	* @param[in] type
vcoubard	1183:1589830dbdb7	1078	* The ADV type field describing the variable length data.
vcoubard	1183:1589830dbdb7	1079	* @param[in] data
vcoubard	1183:1589830dbdb7	1080	* Data bytes.
vcoubard	1183:1589830dbdb7	1081	* @param[in] len
vcoubard	1183:1589830dbdb7	1082	* Length of data.
vcoubard	1131:692ddf04fc42	1083	*
vcoubard	1183:1589830dbdb7	1084	* @note If advertisements are enabled, then the update will take effect immediately.
vcoubard	1131:692ddf04fc42	1085	*
vcoubard	1131:692ddf04fc42	1086	* @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard	1135:22aada733dbd	1087	* matching AD type; otherwise, an appropriate error.
vcoubard	1131:692ddf04fc42	1088	*/
vcoubard	1131:692ddf04fc42	1089	ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1188:039621a96054	1090	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1131:692ddf04fc42	1091	ble_error_t rc;
vcoubard	1188:039621a96054	1092	if ((rc = advPayloadCopy.updateData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1093	return rc;
vcoubard	1131:692ddf04fc42	1094	}
vcoubard	1131:692ddf04fc42	1095
vcoubard	1188:039621a96054	1096	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1188:039621a96054	1097	if (rc == BLE_ERROR_NONE) {
vcoubard	1188:039621a96054	1098	_advPayload = advPayloadCopy;
vcoubard	1188:039621a96054	1099	}
vcoubard	1188:039621a96054	1100
vcoubard	1188:039621a96054	1101	return rc;
vcoubard	1131:692ddf04fc42	1102	}
vcoubard	1131:692ddf04fc42	1103
vcoubard	1131:692ddf04fc42	1104	/**
vcoubard	1131:692ddf04fc42	1105	* Set up a particular, user-constructed advertisement payload for the
vcoubard	1131:692ddf04fc42	1106	* underlying stack. It would be uncommon for this API to be used directly;
vcoubard	1183:1589830dbdb7	1107	* there are other APIs to build an advertisement payload (refer to
vcoubard	1183:1589830dbdb7	1108	* Gap::accumulateAdvertisingPayload()).
vcoubard	1183:1589830dbdb7	1109	*
vcoubard	1183:1589830dbdb7	1110	* @param[in] payload
vcoubard	1183:1589830dbdb7	1111	* A reference to a user constructed advertisement
vcoubard	1183:1589830dbdb7	1112	* payload.
vcoubard	1183:1589830dbdb7	1113	*
vcoubard	1183:1589830dbdb7	1114	* @return BLE_ERROR_NONE if the advertisement payload was successfully
vcoubard	1183:1589830dbdb7	1115	* set.
vcoubard	1131:692ddf04fc42	1116	*/
vcoubard	1131:692ddf04fc42	1117	ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
vcoubard	1188:039621a96054	1118	ble_error_t rc = setAdvertisingData(_advPayload, _scanResponse);
vcoubard	1188:039621a96054	1119	if (rc != BLE_ERROR_NONE) {
vcoubard	1188:039621a96054	1120	/* The payload has a problem, do not store it */
vcoubard	1188:039621a96054	1121	return rc;
vcoubard	1188:039621a96054	1122	}
vcoubard	1131:692ddf04fc42	1123	_advPayload = payload;
vcoubard	1188:039621a96054	1124	return BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1125	}
vcoubard	1131:692ddf04fc42	1126
vcoubard	1131:692ddf04fc42	1127	/**
vcoubard	1183:1589830dbdb7	1128	* Get a reference to the advertising payload.
vcoubard	1183:1589830dbdb7	1129	*
vcoubard	1183:1589830dbdb7	1130	* @return Read back advertising data.
vcoubard	1183:1589830dbdb7	1131	*
vcoubard	1183:1589830dbdb7	1132	* @note Useful for storing and restoring payload.
vcoubard	1131:692ddf04fc42	1133	*/
vcoubard	1131:692ddf04fc42	1134	const GapAdvertisingData &getAdvertisingPayload(void) const {
vcoubard	1131:692ddf04fc42	1135	return _advPayload;
vcoubard	1131:692ddf04fc42	1136	}
vcoubard	1131:692ddf04fc42	1137
vcoubard	1131:692ddf04fc42	1138	/**
vcoubard	1131:692ddf04fc42	1139	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1131:692ddf04fc42	1140	* scanResponse payload.
vcoubard	1131:692ddf04fc42	1141	*
vcoubard	1183:1589830dbdb7	1142	* @param[in] type
vcoubard	1183:1589830dbdb7	1143	* The type describing the variable length data.
vcoubard	1183:1589830dbdb7	1144	* @param[in] data
vcoubard	1183:1589830dbdb7	1145	* Data bytes.
vcoubard	1183:1589830dbdb7	1146	* @param[in] len
vcoubard	1183:1589830dbdb7	1147	* Length of data.
vcoubard	1183:1589830dbdb7	1148	*
vcoubard	1183:1589830dbdb7	1149	* @return BLE_ERROR_NONE if the data was successfully added to the scan
vcoubard	1183:1589830dbdb7	1150	* response payload.
vcoubard	1131:692ddf04fc42	1151	*/
vcoubard	1131:692ddf04fc42	1152	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1188:039621a96054	1153	GapAdvertisingData scanResponseCopy = _scanResponse;
vcoubard	1131:692ddf04fc42	1154	ble_error_t rc;
vcoubard	1188:039621a96054	1155	if ((rc = scanResponseCopy.addData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1156	return rc;
vcoubard	1131:692ddf04fc42	1157	}
vcoubard	1131:692ddf04fc42	1158
vcoubard	1188:039621a96054	1159	rc = setAdvertisingData(_advPayload, scanResponseCopy);
vcoubard	1188:039621a96054	1160	if (rc == BLE_ERROR_NONE) {
vcoubard	1188:039621a96054	1161	_scanResponse = scanResponseCopy;
vcoubard	1188:039621a96054	1162	}
vcoubard	1188:039621a96054	1163
vcoubard	1188:039621a96054	1164	return rc;
vcoubard	1131:692ddf04fc42	1165	}
vcoubard	1131:692ddf04fc42	1166
vcoubard	1131:692ddf04fc42	1167	/**
vcoubard	1131:692ddf04fc42	1168	* Reset any scan response prepared from prior calls to
vcoubard	1183:1589830dbdb7	1169	* Gap::accumulateScanResponse().
vcoubard	1131:692ddf04fc42	1170	*
vcoubard	1183:1589830dbdb7	1171	* @note This should be followed by a call to Gap::setAdvertisingPayload() or
vcoubard	1183:1589830dbdb7	1172	* Gap::startAdvertising() before the update takes effect.
vcoubard	1131:692ddf04fc42	1173	*/
vcoubard	1131:692ddf04fc42	1174	void clearScanResponse(void) {
vcoubard	1131:692ddf04fc42	1175	_scanResponse.clear();
vcoubard	1188:039621a96054	1176	setAdvertisingData(_advPayload, _scanResponse);
vcoubard	1131:692ddf04fc42	1177	}
vcoubard	1131:692ddf04fc42	1178
vcoubard	1131:692ddf04fc42	1179	/**
vcoubard	1131:692ddf04fc42	1180	* Set up parameters for GAP scanning (observer mode).
vcoubard	1183:1589830dbdb7	1181	*
vcoubard	1131:692ddf04fc42	1182	* @param[in] interval
vcoubard	1131:692ddf04fc42	1183	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	1184	* @param[in] window
vcoubard	1131:692ddf04fc42	1185	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	1186	* @param[in] timeout
vcoubard	1131:692ddf04fc42	1187	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
vcoubard	1131:692ddf04fc42	1188	* @param[in] activeScanning
vcoubard	1131:692ddf04fc42	1189	* Set to True if active-scanning is required. This is used to fetch the
vcoubard	1131:692ddf04fc42	1190	* scan response from a peer if possible.
vcoubard	1131:692ddf04fc42	1191	*
vcoubard	1183:1589830dbdb7	1192	* @return BLE_ERROR_NONE if the scan parameters were correctly set.
vcoubard	1131:692ddf04fc42	1193	*
vcoubard	1183:1589830dbdb7	1194	* @note The scanning window divided by the interval determines the duty cycle for
vcoubard	1183:1589830dbdb7	1195	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1183:1589830dbdb7	1196	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1183:1589830dbdb7	1197	* to have the interval and window set to the same value. In this case,
vcoubard	1183:1589830dbdb7	1198	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1183:1589830dbdb7	1199	* interval.
vcoubard	1131:692ddf04fc42	1200	*
vcoubard	1183:1589830dbdb7	1201	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1183:1589830dbdb7	1202	* enabled by using startScan().
vcoubard	1183:1589830dbdb7	1203	*
vcoubard	1183:1589830dbdb7	1204	* @note The scan interval and window are recommendations to the BLE stack.
vcoubard	1131:692ddf04fc42	1205	*/
vcoubard	1131:692ddf04fc42	1206	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard	1131:692ddf04fc42	1207	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard	1131:692ddf04fc42	1208	uint16_t timeout = 0,
vcoubard	1131:692ddf04fc42	1209	bool activeScanning = false) {
vcoubard	1131:692ddf04fc42	1210	ble_error_t rc;
vcoubard	1131:692ddf04fc42	1211	if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
vcoubard	1131:692ddf04fc42	1212	((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
vcoubard	1131:692ddf04fc42	1213	((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
vcoubard	1131:692ddf04fc42	1214	_scanningParams.setActiveScanning(activeScanning);
vcoubard	1131:692ddf04fc42	1215	return BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1216	}
vcoubard	1131:692ddf04fc42	1217
vcoubard	1131:692ddf04fc42	1218	return rc;
vcoubard	1131:692ddf04fc42	1219	}
vcoubard	1131:692ddf04fc42	1220
vcoubard	1131:692ddf04fc42	1221	/**
vcoubard	1131:692ddf04fc42	1222	* Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard	1183:1589830dbdb7	1223	*
vcoubard	1131:692ddf04fc42	1224	* @param[in] interval
vcoubard	1131:692ddf04fc42	1225	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	1226	*
vcoubard	1183:1589830dbdb7	1227	* @return BLE_ERROR_NONE if the scan interval was correctly set.
vcoubard	1131:692ddf04fc42	1228	*
vcoubard	1183:1589830dbdb7	1229	* @note The scanning window divided by the interval determines the duty cycle for
vcoubard	1183:1589830dbdb7	1230	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1183:1589830dbdb7	1231	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1183:1589830dbdb7	1232	* to have the interval and window set to the same value. In this case,
vcoubard	1183:1589830dbdb7	1233	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1183:1589830dbdb7	1234	* interval.
vcoubard	1183:1589830dbdb7	1235	*
vcoubard	1183:1589830dbdb7	1236	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1183:1589830dbdb7	1237	* enabled by using startScan().
vcoubard	1131:692ddf04fc42	1238	*/
vcoubard	1131:692ddf04fc42	1239	ble_error_t setScanInterval(uint16_t interval) {
vcoubard	1131:692ddf04fc42	1240	return _scanningParams.setInterval(interval);
vcoubard	1131:692ddf04fc42	1241	}
vcoubard	1131:692ddf04fc42	1242
vcoubard	1131:692ddf04fc42	1243	/**
vcoubard	1131:692ddf04fc42	1244	* Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard	1183:1589830dbdb7	1245	*
vcoubard	1131:692ddf04fc42	1246	* @param[in] window
vcoubard	1131:692ddf04fc42	1247	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1131:692ddf04fc42	1248	*
vcoubard	1183:1589830dbdb7	1249	* @return BLE_ERROR_NONE if the scan window was correctly set.
vcoubard	1131:692ddf04fc42	1250	*
vcoubard	1183:1589830dbdb7	1251	* @note The scanning window divided by the interval determines the duty cycle for
vcoubard	1183:1589830dbdb7	1252	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1183:1589830dbdb7	1253	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1183:1589830dbdb7	1254	* to have the interval and window set to the same value. In this case,
vcoubard	1183:1589830dbdb7	1255	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1183:1589830dbdb7	1256	* interval.
vcoubard	1131:692ddf04fc42	1257	*
vcoubard	1183:1589830dbdb7	1258	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1183:1589830dbdb7	1259	* enabled by using startScan().
vcoubard	1183:1589830dbdb7	1260	*
vcoubard	1183:1589830dbdb7	1261	* @note If scanning is already active, the updated value of scanWindow will be
vcoubard	1183:1589830dbdb7	1262	* propagated to the underlying BLE stack.
vcoubard	1131:692ddf04fc42	1263	*/
vcoubard	1131:692ddf04fc42	1264	ble_error_t setScanWindow(uint16_t window) {
vcoubard	1131:692ddf04fc42	1265	ble_error_t rc;
vcoubard	1131:692ddf04fc42	1266	if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1267	return rc;
vcoubard	1131:692ddf04fc42	1268	}
vcoubard	1131:692ddf04fc42	1269
vcoubard	1131:692ddf04fc42	1270	/* If scanning is already active, propagate the new setting to the stack. */
vcoubard	1131:692ddf04fc42	1271	if (scanningActive) {
vcoubard	1131:692ddf04fc42	1272	return startRadioScan(_scanningParams);
vcoubard	1131:692ddf04fc42	1273	}
vcoubard	1131:692ddf04fc42	1274
vcoubard	1131:692ddf04fc42	1275	return BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1276	}
vcoubard	1131:692ddf04fc42	1277
vcoubard	1131:692ddf04fc42	1278	/**
vcoubard	1131:692ddf04fc42	1279	* Set up parameters for GAP scanning (observer mode).
vcoubard	1183:1589830dbdb7	1280	*
vcoubard	1131:692ddf04fc42	1281	* @param[in] timeout
vcoubard	1131:692ddf04fc42	1282	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
vcoubard	1131:692ddf04fc42	1283	*
vcoubard	1183:1589830dbdb7	1284	* @return BLE_ERROR_NONE if the scan timeout was correctly set.
vcoubard	1131:692ddf04fc42	1285	*
vcoubard	1183:1589830dbdb7	1286	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1183:1589830dbdb7	1287	* enabled by using startScan().
vcoubard	1183:1589830dbdb7	1288	*
vcoubard	1183:1589830dbdb7	1289	* @note If scanning is already active, the updated value of scanTimeout will be
vcoubard	1183:1589830dbdb7	1290	* propagated to the underlying BLE stack.
vcoubard	1131:692ddf04fc42	1291	*/
vcoubard	1131:692ddf04fc42	1292	ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard	1131:692ddf04fc42	1293	ble_error_t rc;
vcoubard	1131:692ddf04fc42	1294	if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1295	return rc;
vcoubard	1131:692ddf04fc42	1296	}
vcoubard	1131:692ddf04fc42	1297
vcoubard	1131:692ddf04fc42	1298	/* If scanning is already active, propagate the new settings to the stack. */
vcoubard	1131:692ddf04fc42	1299	if (scanningActive) {
vcoubard	1131:692ddf04fc42	1300	return startRadioScan(_scanningParams);
vcoubard	1131:692ddf04fc42	1301	}
vcoubard	1131:692ddf04fc42	1302
vcoubard	1131:692ddf04fc42	1303	return BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1304	}
vcoubard	1131:692ddf04fc42	1305
vcoubard	1131:692ddf04fc42	1306	/**
vcoubard	1183:1589830dbdb7	1307	* Modify the active scanning parameter for GAP scanning (observer mode).
vcoubard	1183:1589830dbdb7	1308	* This is used to fetch the scan response from a peer if possible.
vcoubard	1183:1589830dbdb7	1309	*
vcoubard	1131:692ddf04fc42	1310	* @param[in] activeScanning
vcoubard	1183:1589830dbdb7	1311	* Set to True if active-scanning is required.
vcoubard	1131:692ddf04fc42	1312	*
vcoubard	1183:1589830dbdb7	1313	* @return BLE_ERROR_NONE if active scanning was successfully set.
vcoubard	1131:692ddf04fc42	1314	*
vcoubard	1183:1589830dbdb7	1315	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1183:1589830dbdb7	1316	* enabled by using startScan().
vcoubard	1183:1589830dbdb7	1317	*
vcoubard	1183:1589830dbdb7	1318	* @note If scanning is already in progress, then active-scanning will be enabled
vcoubard	1183:1589830dbdb7	1319	* for the underlying BLE stack.
vcoubard	1131:692ddf04fc42	1320	*/
vcoubard	1131:692ddf04fc42	1321	ble_error_t setActiveScanning(bool activeScanning) {
vcoubard	1131:692ddf04fc42	1322	_scanningParams.setActiveScanning(activeScanning);
vcoubard	1131:692ddf04fc42	1323
vcoubard	1131:692ddf04fc42	1324	/* If scanning is already active, propagate the new settings to the stack. */
vcoubard	1131:692ddf04fc42	1325	if (scanningActive) {
vcoubard	1131:692ddf04fc42	1326	return startRadioScan(_scanningParams);
vcoubard	1131:692ddf04fc42	1327	}
vcoubard	1131:692ddf04fc42	1328
vcoubard	1131:692ddf04fc42	1329	return BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1330	}
vcoubard	1131:692ddf04fc42	1331
vcoubard	1131:692ddf04fc42	1332	/**
vcoubard	1131:692ddf04fc42	1333	* Start scanning (Observer Procedure) based on the parameters currently in
vcoubard	1131:692ddf04fc42	1334	* effect.
vcoubard	1131:692ddf04fc42	1335	*
vcoubard	1131:692ddf04fc42	1336	* @param[in] callback
vcoubard	1131:692ddf04fc42	1337	* The application-specific callback to be invoked upon
vcoubard	1131:692ddf04fc42	1338	* receiving every advertisement report. This can be passed in
vcoubard	1131:692ddf04fc42	1339	* as NULL, in which case scanning may not be enabled at all.
vcoubard	1183:1589830dbdb7	1340	*
vcoubard	1183:1589830dbdb7	1341	* @return BLE_ERROR_NONE if the device successfully started the scan
vcoubard	1183:1589830dbdb7	1342	* procedure.
vcoubard	1131:692ddf04fc42	1343	*/
vcoubard	1131:692ddf04fc42	1344	ble_error_t startScan(void (callback)(const AdvertisementCallbackParams_t params)) {
vcoubard	1131:692ddf04fc42	1345	ble_error_t err = BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1346	if (callback) {
vcoubard	1131:692ddf04fc42	1347	if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1348	scanningActive = true;
vcoubard	1131:692ddf04fc42	1349	onAdvertisementReport.attach(callback);
vcoubard	1131:692ddf04fc42	1350	}
vcoubard	1131:692ddf04fc42	1351	}
vcoubard	1131:692ddf04fc42	1352
vcoubard	1131:692ddf04fc42	1353	return err;
vcoubard	1131:692ddf04fc42	1354	}
vcoubard	1131:692ddf04fc42	1355
vcoubard	1131:692ddf04fc42	1356	/**
vcoubard	1183:1589830dbdb7	1357	* Same as Gap::startScan(), but allows the possibility to add an object
vcoubard	1183:1589830dbdb7	1358	* reference and member function as handler for advertisement event
vcoubard	1183:1589830dbdb7	1359	* callbacks.
vcoubard	1183:1589830dbdb7	1360	*
vcoubard	1183:1589830dbdb7	1361	* @param[in] object
vcoubard	1183:1589830dbdb7	1362	* Pointer to the object of a class defining the member callback
vcoubard	1183:1589830dbdb7	1363	* function (@p callbackMember).
vcoubard	1183:1589830dbdb7	1364	* @param[in] callbackMember
vcoubard	1183:1589830dbdb7	1365	* The member callback (within the context of an object) to be
vcoubard	1183:1589830dbdb7	1366	* invoked.
vcoubard	1183:1589830dbdb7	1367	*
vcoubard	1183:1589830dbdb7	1368	* @return BLE_ERROR_NONE if the device successfully started the scan
vcoubard	1183:1589830dbdb7	1369	* procedure.
vcoubard	1131:692ddf04fc42	1370	*/
vcoubard	1131:692ddf04fc42	1371	template<typename T>
vcoubard	1131:692ddf04fc42	1372	ble_error_t startScan(T object, void (T::callbackMember)(const AdvertisementCallbackParams_t *params)) {
vcoubard	1131:692ddf04fc42	1373	ble_error_t err = BLE_ERROR_NONE;
vcoubard	1131:692ddf04fc42	1374	if (object && callbackMember) {
vcoubard	1131:692ddf04fc42	1375	if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
vcoubard	1131:692ddf04fc42	1376	scanningActive = true;
vcoubard	1131:692ddf04fc42	1377	onAdvertisementReport.attach(object, callbackMember);
vcoubard	1131:692ddf04fc42	1378	}
vcoubard	1131:692ddf04fc42	1379	}
vcoubard	1131:692ddf04fc42	1380
vcoubard	1131:692ddf04fc42	1381	return err;
vcoubard	1131:692ddf04fc42	1382	}
vcoubard	1131:692ddf04fc42	1383
vcoubard	1131:692ddf04fc42	1384	/**
vcoubard	1131:692ddf04fc42	1385	* Initialize radio-notification events to be generated from the stack.
vcoubard	1131:692ddf04fc42	1386	* This API doesn't need to be called directly.
vcoubard	1131:692ddf04fc42	1387	*
vcoubard	1131:692ddf04fc42	1388	* Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard	1131:692ddf04fc42	1389	* (nACTIVE) signals from the stack that notify the application when the
vcoubard	1131:692ddf04fc42	1390	* radio is in use.
vcoubard	1131:692ddf04fc42	1391	*
vcoubard	1131:692ddf04fc42	1392	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1131:692ddf04fc42	1393	* signal is sent at the end of the radio event. These signals can be used
vcoubard	1131:692ddf04fc42	1394	* by the application programmer to synchronize application logic with radio
vcoubard	1131:692ddf04fc42	1395	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1131:692ddf04fc42	1396	* devices, to manage peak current drawn during periods when the radio is on,
vcoubard	1131:692ddf04fc42	1397	* or to trigger sensor data collection for transmission in the Radio Event.
vcoubard	1131:692ddf04fc42	1398	*
vcoubard	1131:692ddf04fc42	1399	* @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
vcoubard	1131:692ddf04fc42	1400	*/
vcoubard	1131:692ddf04fc42	1401	virtual ble_error_t initRadioNotification(void) {
vcoubard	1131:692ddf04fc42	1402	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1131:692ddf04fc42	1403	}
vcoubard	1131:692ddf04fc42	1404
vcoubard	1131:692ddf04fc42	1405	private:
vcoubard	1183:1589830dbdb7	1406	/**
vcoubard	1183:1589830dbdb7	1407	* Functionality that is BLE stack-dependent and must be implemented by the
vcoubard	1183:1589830dbdb7	1408	* ported. This is a helper function to set the advertising data in the
vcoubard	1183:1589830dbdb7	1409	* BLE stack.
vcoubard	1183:1589830dbdb7	1410	*
vcoubard	1183:1589830dbdb7	1411	* @param[in] advData
vcoubard	1183:1589830dbdb7	1412	* The new advertising data.
vcoubard	1183:1589830dbdb7	1413	* @param[in] scanResponse
vcoubard	1183:1589830dbdb7	1414	* The new scan response data.
vcoubard	1183:1589830dbdb7	1415	*
vcoubard	1183:1589830dbdb7	1416	* @return BLE_ERROR_NONE if the advertising data was set successfully.
vcoubard	1183:1589830dbdb7	1417	*/
vcoubard	1131:692ddf04fc42	1418	virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
vcoubard	1183:1589830dbdb7	1419
vcoubard	1183:1589830dbdb7	1420	/**
vcoubard	1183:1589830dbdb7	1421	* Functionality that is BLE stack-dependent and must be implemented by the
vcoubard	1183:1589830dbdb7	1422	* ported. This is a helper function to start the advertising procedure in
vcoubard	1183:1589830dbdb7	1423	* the underlying BLE stack.
vcoubard	1183:1589830dbdb7	1424	*
vcoubard	1183:1589830dbdb7	1425	* @param[in]
vcoubard	1183:1589830dbdb7	1426	* The advertising parameters.
vcoubard	1183:1589830dbdb7	1427	*
vcoubard	1183:1589830dbdb7	1428	* @return BLE_ERROR_NONE if the advertising procedure was successfully
vcoubard	1183:1589830dbdb7	1429	* started.
vcoubard	1183:1589830dbdb7	1430	*/
vcoubard	1131:692ddf04fc42	1431	virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
vcoubard	1131:692ddf04fc42	1432
vcoubard	1131:692ddf04fc42	1433	public:
vcoubard	1131:692ddf04fc42	1434	/**
vcoubard	1183:1589830dbdb7	1435	* Accessor to read back currently active advertising parameters.
vcoubard	1183:1589830dbdb7	1436	*
vcoubard	1183:1589830dbdb7	1437	* @return A reference to the current advertising parameters.
vcoubard	1131:692ddf04fc42	1438	*/
vcoubard	1131:692ddf04fc42	1439	GapAdvertisingParams &getAdvertisingParams(void) {
vcoubard	1131:692ddf04fc42	1440	return _advParams;
vcoubard	1131:692ddf04fc42	1441	}
vcoubard	1183:1589830dbdb7	1442
vcoubard	1183:1589830dbdb7	1443	/**
vcoubard	1183:1589830dbdb7	1444	* A const alternative to Gap::getAdvertisingParams().
vcoubard	1183:1589830dbdb7	1445	*
vcoubard	1183:1589830dbdb7	1446	* @return A const reference to the current advertising parameters.
vcoubard	1183:1589830dbdb7	1447	*/
vcoubard	1131:692ddf04fc42	1448	const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard	1131:692ddf04fc42	1449	return _advParams;
vcoubard	1131:692ddf04fc42	1450	}
vcoubard	1131:692ddf04fc42	1451
vcoubard	1131:692ddf04fc42	1452	/**
vcoubard	1131:692ddf04fc42	1453	* Set up a particular, user-constructed set of advertisement parameters for
vcoubard	1131:692ddf04fc42	1454	* the underlying stack. It would be uncommon for this API to be used
vcoubard	1131:692ddf04fc42	1455	* directly; there are other APIs to tweak advertisement parameters
vcoubard	1131:692ddf04fc42	1456	* individually.
vcoubard	1183:1589830dbdb7	1457	*
vcoubard	1183:1589830dbdb7	1458	* @param[in] newParams
vcoubard	1183:1589830dbdb7	1459	* The new advertising parameters.
vcoubard	1131:692ddf04fc42	1460	*/
vcoubard	1131:692ddf04fc42	1461	void setAdvertisingParams(const GapAdvertisingParams &newParams) {
vcoubard	1131:692ddf04fc42	1462	_advParams = newParams;
vcoubard	1131:692ddf04fc42	1463	}
vcoubard	1131:692ddf04fc42	1464
vcoubard	1131:692ddf04fc42	1465	/* Event callback handlers. */
vcoubard	1131:692ddf04fc42	1466	public:
vcoubard	1131:692ddf04fc42	1467	/**
vcoubard	1131:692ddf04fc42	1468	* Set up a callback for timeout events. Refer to TimeoutSource_t for
vcoubard	1131:692ddf04fc42	1469	* possible event types.
vcoubard	1183:1589830dbdb7	1470	*
vcoubard	1183:1589830dbdb7	1471	* @param[in] callback
vcoubard	1183:1589830dbdb7	1472	* Event handler being registered.
vcoubard	1183:1589830dbdb7	1473	*
vcoubard	1183:1589830dbdb7	1474	* @note It is possible to unregister callbacks using onTimeout().detach(callback).
vcoubard	1131:692ddf04fc42	1475	*/
vcoubard	1131:692ddf04fc42	1476	void onTimeout(TimeoutEventCallback_t callback) {
vcoubard	1131:692ddf04fc42	1477	timeoutCallbackChain.add(callback);
vcoubard	1131:692ddf04fc42	1478	}
vcoubard	1131:692ddf04fc42	1479
vcoubard	1131:692ddf04fc42	1480	/**
vcoubard	1183:1589830dbdb7	1481	* @brief Provide access to the callchain of timeout event callbacks.
vcoubard	1183:1589830dbdb7	1482	*
vcoubard	1183:1589830dbdb7	1483	* @note It is possible to register callbacks using onTimeout().add(callback).
vcoubard	1183:1589830dbdb7	1484	*
vcoubard	1183:1589830dbdb7	1485	* @note It is possible to unregister callbacks using onTimeout().detach(callback).
vcoubard	1183:1589830dbdb7	1486	*
vcoubard	1183:1589830dbdb7	1487	* @return A reference to the timeout event callbacks chain.
vcoubard	1131:692ddf04fc42	1488	*/
vcoubard	1131:692ddf04fc42	1489	TimeoutEventCallbackChain_t& onTimeout() {
vcoubard	1131:692ddf04fc42	1490	return timeoutCallbackChain;
vcoubard	1131:692ddf04fc42	1491	}
vcoubard	1131:692ddf04fc42	1492
vcoubard	1131:692ddf04fc42	1493	/**
vcoubard	1131:692ddf04fc42	1494	* Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard	1183:1589830dbdb7	1495	*
vcoubard	1183:1589830dbdb7	1496	* @param[in] callback
vcoubard	1183:1589830dbdb7	1497	* Event handler being registered.
vcoubard	1183:1589830dbdb7	1498	*
vcoubard	1131:692ddf04fc42	1499	* @note It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard	1131:692ddf04fc42	1500	*/
vcoubard	1183:1589830dbdb7	1501	void onConnection(ConnectionEventCallback_t callback) {
vcoubard	1183:1589830dbdb7	1502	connectionCallChain.add(callback);
vcoubard	1183:1589830dbdb7	1503	}
vcoubard	1131:692ddf04fc42	1504
vcoubard	1131:692ddf04fc42	1505	/**
vcoubard	1183:1589830dbdb7	1506	* Same as Gap::onConnection(), but allows the possibility to add an object
vcoubard	1183:1589830dbdb7	1507	* reference and member function as handler for connection event
vcoubard	1183:1589830dbdb7	1508	* callbacks.
vcoubard	1183:1589830dbdb7	1509	*
vcoubard	1183:1589830dbdb7	1510	* @param[in] tptr
vcoubard	1183:1589830dbdb7	1511	* Pointer to the object of a class defining the member callback
vcoubard	1183:1589830dbdb7	1512	* function (@p mptr).
vcoubard	1183:1589830dbdb7	1513	* @param[in] mptr
vcoubard	1183:1589830dbdb7	1514	* The member callback (within the context of an object) to be
vcoubard	1183:1589830dbdb7	1515	* invoked.
vcoubard	1183:1589830dbdb7	1516	*/
vcoubard	1183:1589830dbdb7	1517	template<typename T>
vcoubard	1183:1589830dbdb7	1518	void onConnection(T tptr, void (T::mptr)(const ConnectionCallbackParams_t*)) {
vcoubard	1183:1589830dbdb7	1519	connectionCallChain.add(tptr, mptr);
vcoubard	1183:1589830dbdb7	1520	}
vcoubard	1183:1589830dbdb7	1521
vcoubard	1183:1589830dbdb7	1522	/**
vcoubard	1183:1589830dbdb7	1523	* @brief Provide access to the callchain of connection event callbacks.
vcoubard	1183:1589830dbdb7	1524	*
vcoubard	1183:1589830dbdb7	1525	* @return A reference to the connection event callbacks chain.
vcoubard	1183:1589830dbdb7	1526	*
vcoubard	1183:1589830dbdb7	1527	* @note It is possible to register callbacks using onConnection().add(callback).
vcoubard	1183:1589830dbdb7	1528	*
vcoubard	1183:1589830dbdb7	1529	* @note It is possible to unregister callbacks using onConnection().detach(callback).
vcoubard	1131:692ddf04fc42	1530	*/
vcoubard	1132:6362b7c2fdff	1531	ConnectionEventCallbackChain_t& onConnection() {
vcoubard	1131:692ddf04fc42	1532	return connectionCallChain;
vcoubard	1131:692ddf04fc42	1533	}
vcoubard	1131:692ddf04fc42	1534
vcoubard	1131:692ddf04fc42	1535	/**
vcoubard	1131:692ddf04fc42	1536	* Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard	1183:1589830dbdb7	1537	*
vcoubard	1183:1589830dbdb7	1538	* @param[in] callback
vcoubard	1183:1589830dbdb7	1539	Event handler being registered.
vcoubard	1183:1589830dbdb7	1540	*
vcoubard	1183:1589830dbdb7	1541	* @note It is possible to unregister callbacks using onDisconnection().detach(callback).
vcoubard	1131:692ddf04fc42	1542	*/
vcoubard	1183:1589830dbdb7	1543	void onDisconnection(DisconnectionEventCallback_t callback) {
vcoubard	1183:1589830dbdb7	1544	disconnectionCallChain.add(callback);
vcoubard	1183:1589830dbdb7	1545	}
vcoubard	1131:692ddf04fc42	1546
vcoubard	1131:692ddf04fc42	1547	/**
vcoubard	1183:1589830dbdb7	1548	* Same as Gap::onDisconnection(), but allows the possibility to add an object
vcoubard	1183:1589830dbdb7	1549	* reference and member function as handler for disconnection event
vcoubard	1183:1589830dbdb7	1550	* callbacks.
vcoubard	1183:1589830dbdb7	1551	*
vcoubard	1183:1589830dbdb7	1552	* @param[in] tptr
vcoubard	1183:1589830dbdb7	1553	* Pointer to the object of a class defining the member callback
vcoubard	1183:1589830dbdb7	1554	* function (@p mptr).
vcoubard	1183:1589830dbdb7	1555	* @param[in] mptr
vcoubard	1183:1589830dbdb7	1556	* The member callback (within the context of an object) to be
vcoubard	1183:1589830dbdb7	1557	* invoked.
vcoubard	1183:1589830dbdb7	1558	*/
vcoubard	1183:1589830dbdb7	1559	template<typename T>
vcoubard	1183:1589830dbdb7	1560	void onDisconnection(T tptr, void (T::mptr)(const DisconnectionCallbackParams_t*)) {
vcoubard	1183:1589830dbdb7	1561	disconnectionCallChain.add(tptr, mptr);
vcoubard	1183:1589830dbdb7	1562	}
vcoubard	1183:1589830dbdb7	1563
vcoubard	1183:1589830dbdb7	1564	/**
vcoubard	1183:1589830dbdb7	1565	* @brief Provide access to the callchain of disconnection event callbacks.
vcoubard	1183:1589830dbdb7	1566	*
vcoubard	1183:1589830dbdb7	1567	* @return A reference to the disconnection event callback chain.
vcoubard	1183:1589830dbdb7	1568	*
vcoubard	1183:1589830dbdb7	1569	* @note It is possible to register callbacks using onDisconnection().add(callback).
vcoubard	1183:1589830dbdb7	1570	*
vcoubard	1183:1589830dbdb7	1571	* @note It is possible to unregister callbacks using onDisconnection().detach(callback).
vcoubard	1131:692ddf04fc42	1572	*/
vcoubard	1131:692ddf04fc42	1573	DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard	1131:692ddf04fc42	1574	return disconnectionCallChain;
vcoubard	1131:692ddf04fc42	1575	}
vcoubard	1131:692ddf04fc42	1576
vcoubard	1131:692ddf04fc42	1577	/**
vcoubard	1131:692ddf04fc42	1578	* Set the application callback for radio-notification events.
vcoubard	1131:692ddf04fc42	1579	*
vcoubard	1131:692ddf04fc42	1580	* Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard	1131:692ddf04fc42	1581	* (nACTIVE) signals from the stack that notify the application when the
vcoubard	1131:692ddf04fc42	1582	* radio is in use.
vcoubard	1131:692ddf04fc42	1583	*
vcoubard	1131:692ddf04fc42	1584	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1131:692ddf04fc42	1585	* signal is sent at the end of the radio event. These signals can be used
vcoubard	1131:692ddf04fc42	1586	* by the application programmer to synchronize application logic with radio
vcoubard	1131:692ddf04fc42	1587	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1131:692ddf04fc42	1588	* devices, to manage peak current drawn during periods when the radio is on,
vcoubard	1131:692ddf04fc42	1589	* or to trigger sensor data collection for transmission in the Radio Event.
vcoubard	1131:692ddf04fc42	1590	*
vcoubard	1183:1589830dbdb7	1591	* @param[in] callback
vcoubard	1183:1589830dbdb7	1592	* The application handler to be invoked in response to a radio
vcoubard	1183:1589830dbdb7	1593	* ACTIVE/INACTIVE event.
vcoubard	1131:692ddf04fc42	1594	*/
vcoubard	1131:692ddf04fc42	1595	void onRadioNotification(void (*callback)(bool param)) {
vcoubard	1131:692ddf04fc42	1596	radioNotificationCallback.attach(callback);
vcoubard	1131:692ddf04fc42	1597	}
vcoubard	1183:1589830dbdb7	1598
vcoubard	1183:1589830dbdb7	1599	/**
vcoubard	1183:1589830dbdb7	1600	* Same as Gap::onRadioNotification(), but allows the posibility to
vcoubard	1183:1589830dbdb7	1601	* register an object reference and member function as handler for radio
vcoubard	1183:1589830dbdb7	1602	* notification events.
vcoubard	1183:1589830dbdb7	1603	*
vcoubard	1183:1589830dbdb7	1604	* @param[in] tptr
vcoubard	1183:1589830dbdb7	1605	* Pointer to the object of a class defining the member callback
vcoubard	1183:1589830dbdb7	1606	* function (@p mptr).
vcoubard	1183:1589830dbdb7	1607	* @param[in] mptr
vcoubard	1183:1589830dbdb7	1608	* The member callback (within the context of an object) to be
vcoubard	1183:1589830dbdb7	1609	* invoked in response to a radio ACTIVE/INACTIVE event.
vcoubard	1183:1589830dbdb7	1610	*/
vcoubard	1131:692ddf04fc42	1611	template <typename T>
vcoubard	1131:692ddf04fc42	1612	void onRadioNotification(T tptr, void (T::mptr)(bool)) {
vcoubard	1131:692ddf04fc42	1613	radioNotificationCallback.attach(tptr, mptr);
vcoubard	1131:692ddf04fc42	1614	}
vcoubard	1131:692ddf04fc42	1615
vcoubard	1135:22aada733dbd	1616	/**
vcoubard	1135:22aada733dbd	1617	* Setup a callback to be invoked to notify the user application that the
vcoubard	1135:22aada733dbd	1618	* Gap instance is about to shutdown (possibly as a result of a call
vcoubard	1135:22aada733dbd	1619	* to BLE::shutdown()).
vcoubard	1135:22aada733dbd	1620	*
vcoubard	1183:1589830dbdb7	1621	* @param[in] callback
vcoubard	1183:1589830dbdb7	1622	* The handler that is being registered to be notified of
vcoubard	1183:1589830dbdb7	1623	* shutdown events.
vcoubard	1183:1589830dbdb7	1624	*
vcoubard	1183:1589830dbdb7	1625	* @note It is possible to chain together multiple onShutdown callbacks
vcoubard	1135:22aada733dbd	1626	* (potentially from different modules of an application) to be notified
vcoubard	1135:22aada733dbd	1627	* before the Gap instance is shutdown.
vcoubard	1135:22aada733dbd	1628	*
vcoubard	1183:1589830dbdb7	1629	* @note It is also possible to set up a callback into a member function of
vcoubard	1135:22aada733dbd	1630	* some object.
vcoubard	1135:22aada733dbd	1631	*
vcoubard	1183:1589830dbdb7	1632	* @note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard	1135:22aada733dbd	1633	*/
vcoubard	1135:22aada733dbd	1634	void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard	1135:22aada733dbd	1635	shutdownCallChain.add(callback);
vcoubard	1135:22aada733dbd	1636	}
vcoubard	1183:1589830dbdb7	1637
vcoubard	1183:1589830dbdb7	1638	/**
vcoubard	1183:1589830dbdb7	1639	* Same as Gap::onShutdown(), but allows the posibility to
vcoubard	1183:1589830dbdb7	1640	* register an object reference and member function as handler for shutdown
vcoubard	1183:1589830dbdb7	1641	* events.
vcoubard	1183:1589830dbdb7	1642	*
vcoubard	1183:1589830dbdb7	1643	* @param[in] objPtr
vcoubard	1183:1589830dbdb7	1644	* Pointer to the object of a class defining the member callback
vcoubard	1183:1589830dbdb7	1645	* function (@p memberPtr).
vcoubard	1183:1589830dbdb7	1646	* @param[in] memberPtr
vcoubard	1183:1589830dbdb7	1647	* The member callback (within the context of an object) to be
vcoubard	1183:1589830dbdb7	1648	* invoked in response to a shutdown event.
vcoubard	1183:1589830dbdb7	1649	*/
vcoubard	1135:22aada733dbd	1650	template <typename T>
vcoubard	1135:22aada733dbd	1651	void onShutdown(T objPtr, void (T::memberPtr)(void)) {
vcoubard	1135:22aada733dbd	1652	shutdownCallChain.add(objPtr, memberPtr);
vcoubard	1135:22aada733dbd	1653	}
vcoubard	1135:22aada733dbd	1654
vcoubard	1135:22aada733dbd	1655	/**
vcoubard	1183:1589830dbdb7	1656	* @brief Provide access to the callchain of shutdown event callbacks.
vcoubard	1183:1589830dbdb7	1657	*
vcoubard	1183:1589830dbdb7	1658	* @return A reference to the shutdown event callback chain.
vcoubard	1183:1589830dbdb7	1659	*
vcoubard	1183:1589830dbdb7	1660	* @note It is possible to register callbacks using onShutdown().add(callback).
vcoubard	1183:1589830dbdb7	1661	*
vcoubard	1183:1589830dbdb7	1662	* @note It is possible to unregister callbacks using onShutdown().detach(callback).
vcoubard	1135:22aada733dbd	1663	*/
vcoubard	1135:22aada733dbd	1664	GapShutdownCallbackChain_t& onShutdown() {
vcoubard	1135:22aada733dbd	1665	return shutdownCallChain;
vcoubard	1135:22aada733dbd	1666	}
vcoubard	1135:22aada733dbd	1667
vcoubard	1135:22aada733dbd	1668	public:
vcoubard	1135:22aada733dbd	1669	/**
vcoubard	1135:22aada733dbd	1670	* Notify all registered onShutdown callbacks that the Gap instance is
vcoubard	1135:22aada733dbd	1671	* about to be shutdown and clear all Gap state of the
vcoubard	1135:22aada733dbd	1672	* associated object.
vcoubard	1135:22aada733dbd	1673	*
vcoubard	1135:22aada733dbd	1674	* This function is meant to be overridden in the platform-specific
vcoubard	1135:22aada733dbd	1675	* sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard	1135:22aada733dbd	1676	* state and not the data held in Gap members. This shall be achieved by a
vcoubard	1135:22aada733dbd	1677	* call to Gap::reset() from the sub-class' reset() implementation.
vcoubard	1135:22aada733dbd	1678	*
vcoubard	1135:22aada733dbd	1679	* @return BLE_ERROR_NONE on success.
vcoubard	1135:22aada733dbd	1680	*
vcoubard	1183:1589830dbdb7	1681	* @note Currently a call to reset() does not reset the advertising and
vcoubard	1135:22aada733dbd	1682	* scan parameters to default values.
vcoubard	1135:22aada733dbd	1683	*/
vcoubard	1135:22aada733dbd	1684	virtual ble_error_t reset(void) {
vcoubard	1135:22aada733dbd	1685	/* Notify that the instance is about to shutdown */
vcoubard	1135:22aada733dbd	1686	shutdownCallChain.call(this);
vcoubard	1135:22aada733dbd	1687	shutdownCallChain.clear();
vcoubard	1135:22aada733dbd	1688
vcoubard	1135:22aada733dbd	1689	/* Clear Gap state */
vcoubard	1135:22aada733dbd	1690	state.advertising = 0;
vcoubard	1135:22aada733dbd	1691	state.connected = 0;
vcoubard	1180:e11b058d005e	1692	connectionCount = 0;
vcoubard	1135:22aada733dbd	1693
vcoubard	1135:22aada733dbd	1694	/* Clear scanning state */
vcoubard	1135:22aada733dbd	1695	scanningActive = false;
vcoubard	1135:22aada733dbd	1696
vcoubard	1135:22aada733dbd	1697	/* Clear advertising and scanning data */
vcoubard	1135:22aada733dbd	1698	_advPayload.clear();
vcoubard	1135:22aada733dbd	1699	_scanResponse.clear();
vcoubard	1135:22aada733dbd	1700
vcoubard	1135:22aada733dbd	1701	/* Clear callbacks */
vcoubard	1135:22aada733dbd	1702	timeoutCallbackChain.clear();
vcoubard	1135:22aada733dbd	1703	connectionCallChain.clear();
vcoubard	1135:22aada733dbd	1704	disconnectionCallChain.clear();
vcoubard	1135:22aada733dbd	1705	radioNotificationCallback = NULL;
vcoubard	1135:22aada733dbd	1706	onAdvertisementReport = NULL;
vcoubard	1135:22aada733dbd	1707
vcoubard	1135:22aada733dbd	1708	return BLE_ERROR_NONE;
vcoubard	1135:22aada733dbd	1709	}
vcoubard	1135:22aada733dbd	1710
vcoubard	1131:692ddf04fc42	1711	protected:
vcoubard	1183:1589830dbdb7	1712	/**
vcoubard	1183:1589830dbdb7	1713	* Construct a Gap instance.
vcoubard	1183:1589830dbdb7	1714	*/
vcoubard	1131:692ddf04fc42	1715	Gap() :
vcoubard	1131:692ddf04fc42	1716	_advParams(),
vcoubard	1131:692ddf04fc42	1717	_advPayload(),
vcoubard	1131:692ddf04fc42	1718	_scanningParams(),
vcoubard	1131:692ddf04fc42	1719	_scanResponse(),
vcoubard	1180:e11b058d005e	1720	connectionCount(0),
vcoubard	1131:692ddf04fc42	1721	state(),
vcoubard	1131:692ddf04fc42	1722	scanningActive(false),
vcoubard	1131:692ddf04fc42	1723	timeoutCallbackChain(),
vcoubard	1131:692ddf04fc42	1724	radioNotificationCallback(),
vcoubard	1131:692ddf04fc42	1725	onAdvertisementReport(),
vcoubard	1131:692ddf04fc42	1726	connectionCallChain(),
vcoubard	1131:692ddf04fc42	1727	disconnectionCallChain() {
vcoubard	1131:692ddf04fc42	1728	_advPayload.clear();
vcoubard	1131:692ddf04fc42	1729	_scanResponse.clear();
vcoubard	1131:692ddf04fc42	1730	}
vcoubard	1131:692ddf04fc42	1731
vcoubard	1131:692ddf04fc42	1732	/* Entry points for the underlying stack to report events back to the user. */
vcoubard	1131:692ddf04fc42	1733	public:
vcoubard	1183:1589830dbdb7	1734	/**
vcoubard	1183:1589830dbdb7	1735	* Helper function that notifies all registered handlers of an occurrence
vcoubard	1183:1589830dbdb7	1736	* of a connection event. This function is meant to be called from the
vcoubard	1183:1589830dbdb7	1737	* BLE stack specific implementation when a connection event occurs.
vcoubard	1183:1589830dbdb7	1738	*
vcoubard	1183:1589830dbdb7	1739	* @param[in] handle
vcoubard	1183:1589830dbdb7	1740	* The ID of the connection that generated the event.
vcoubard	1183:1589830dbdb7	1741	* @param[in] role
vcoubard	1183:1589830dbdb7	1742	* The role of this BLE device in the connection.
vcoubard	1183:1589830dbdb7	1743	* @param[in] peerAddrType
vcoubard	1183:1589830dbdb7	1744	* The peer's BLE address type.
vcoubard	1183:1589830dbdb7	1745	* @param[in] peerAddr
vcoubard	1183:1589830dbdb7	1746	* The peer's BLE address.
vcoubard	1183:1589830dbdb7	1747	* @param[in] ownAddrType
vcoubard	1183:1589830dbdb7	1748	* This device's BLE address type.
vcoubard	1183:1589830dbdb7	1749	* @param[in] ownAddr
vcoubard	1183:1589830dbdb7	1750	* This device's BLE address.
vcoubard	1183:1589830dbdb7	1751	* @param[in] connectionParams
vcoubard	1183:1589830dbdb7	1752	* The parameters configured for this connection.
vcoubard	1183:1589830dbdb7	1753	*/
vcoubard	1135:22aada733dbd	1754	void processConnectionEvent(Handle_t handle,
vcoubard	1135:22aada733dbd	1755	Role_t role,
vcoubard	1135:22aada733dbd	1756	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1135:22aada733dbd	1757	const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1135:22aada733dbd	1758	BLEProtocol::AddressType_t ownAddrType,
vcoubard	1135:22aada733dbd	1759	const BLEProtocol::AddressBytes_t ownAddr,
vcoubard	1135:22aada733dbd	1760	const ConnectionParams_t *connectionParams) {
vcoubard	1180:e11b058d005e	1761	/* Update Gap state */
vcoubard	1180:e11b058d005e	1762	state.advertising = 0;
vcoubard	1180:e11b058d005e	1763	state.connected = 1;
vcoubard	1180:e11b058d005e	1764	++connectionCount;
vcoubard	1180:e11b058d005e	1765
vcoubard	1131:692ddf04fc42	1766	ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
vcoubard	1131:692ddf04fc42	1767	connectionCallChain.call(&callbackParams);
vcoubard	1131:692ddf04fc42	1768	}
vcoubard	1131:692ddf04fc42	1769
vcoubard	1183:1589830dbdb7	1770	/**
vcoubard	1183:1589830dbdb7	1771	* Helper function that notifies all registered handlers of an occurrence
vcoubard	1183:1589830dbdb7	1772	* of a disconnection event. This function is meant to be called from the
vcoubard	1183:1589830dbdb7	1773	* BLE stack specific implementation when a disconnection event occurs.
vcoubard	1183:1589830dbdb7	1774	*
vcoubard	1183:1589830dbdb7	1775	* @param[in] handle
vcoubard	1183:1589830dbdb7	1776	* The ID of the connection that generated the event.
vcoubard	1183:1589830dbdb7	1777	* @param[in] reason
vcoubard	1183:1589830dbdb7	1778	* The reason for disconnection.
vcoubard	1183:1589830dbdb7	1779	*/
vcoubard	1131:692ddf04fc42	1780	void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
vcoubard	1180:e11b058d005e	1781	/* Update Gap state */
vcoubard	1180:e11b058d005e	1782	--connectionCount;
vcoubard	1180:e11b058d005e	1783	if (!connectionCount) {
vcoubard	1180:e11b058d005e	1784	state.connected = 0;
vcoubard	1180:e11b058d005e	1785	}
vcoubard	1180:e11b058d005e	1786
vcoubard	1131:692ddf04fc42	1787	DisconnectionCallbackParams_t callbackParams(handle, reason);
vcoubard	1131:692ddf04fc42	1788	disconnectionCallChain.call(&callbackParams);
vcoubard	1131:692ddf04fc42	1789	}
vcoubard	1131:692ddf04fc42	1790
vcoubard	1183:1589830dbdb7	1791	/**
vcoubard	1183:1589830dbdb7	1792	* Helper function that notifies the registered handler of a scanned
vcoubard	1183:1589830dbdb7	1793	* advertisement packet. This function is meant to be called from the
vcoubard	1183:1589830dbdb7	1794	* BLE stack specific implementation when a such event occurs.
vcoubard	1183:1589830dbdb7	1795	*
vcoubard	1183:1589830dbdb7	1796	* @param[in] peerAddr
vcoubard	1183:1589830dbdb7	1797	* The peer's BLE address.
vcoubard	1183:1589830dbdb7	1798	* @param[in] rssi
vcoubard	1183:1589830dbdb7	1799	* The advertisement packet RSSI value.
vcoubard	1183:1589830dbdb7	1800	* @param[in] isScanReponse
vcoubard	1183:1589830dbdb7	1801	* Whether this packet is the response to a scan request.
vcoubard	1183:1589830dbdb7	1802	* @param[in] type
vcoubard	1183:1589830dbdb7	1803	* The type of advertisement.
vcoubard	1183:1589830dbdb7	1804	* @param[in] advertisingDataLen
vcoubard	1183:1589830dbdb7	1805	* Length of the advertisement data.
vcoubard	1183:1589830dbdb7	1806	* @param[in] advertisingData
vcoubard	1183:1589830dbdb7	1807	* Pointer to the advertisement packet's data.
vcoubard	1183:1589830dbdb7	1808	*/
vcoubard	1135:22aada733dbd	1809	void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1135:22aada733dbd	1810	int8_t rssi,
vcoubard	1135:22aada733dbd	1811	bool isScanResponse,
vcoubard	1131:692ddf04fc42	1812	GapAdvertisingParams::AdvertisingType_t type,
vcoubard	1135:22aada733dbd	1813	uint8_t advertisingDataLen,
vcoubard	1135:22aada733dbd	1814	const uint8_t *advertisingData) {
vcoubard	1131:692ddf04fc42	1815	AdvertisementCallbackParams_t params;
vcoubard	1131:692ddf04fc42	1816	memcpy(params.peerAddr, peerAddr, ADDR_LEN);
vcoubard	1131:692ddf04fc42	1817	params.rssi = rssi;
vcoubard	1131:692ddf04fc42	1818	params.isScanResponse = isScanResponse;
vcoubard	1131:692ddf04fc42	1819	params.type = type;
vcoubard	1131:692ddf04fc42	1820	params.advertisingDataLen = advertisingDataLen;
vcoubard	1131:692ddf04fc42	1821	params.advertisingData = advertisingData;
vcoubard	1131:692ddf04fc42	1822	onAdvertisementReport.call(&params);
vcoubard	1131:692ddf04fc42	1823	}
vcoubard	1131:692ddf04fc42	1824
vcoubard	1183:1589830dbdb7	1825	/**
vcoubard	1183:1589830dbdb7	1826	* Helper function that notifies all registered handlers of an occurrence
vcoubard	1183:1589830dbdb7	1827	* of a timeout event. This function is meant to be called from the
vcoubard	1183:1589830dbdb7	1828	* BLE stack specific implementation when a timeout event occurs.
vcoubard	1183:1589830dbdb7	1829	*
vcoubard	1183:1589830dbdb7	1830	* @param[in] source
vcoubard	1183:1589830dbdb7	1831	* The source of the timout event.
vcoubard	1183:1589830dbdb7	1832	*/
vcoubard	1131:692ddf04fc42	1833	void processTimeoutEvent(TimeoutSource_t source) {
vcoubard	1179:4ab722f8dca0	1834	if (source == TIMEOUT_SRC_ADVERTISING) {
vcoubard	1179:4ab722f8dca0	1835	/* Update gap state if the source is an advertising timeout */
vcoubard	1179:4ab722f8dca0	1836	state.advertising = 0;
vcoubard	1179:4ab722f8dca0	1837	}
vcoubard	1131:692ddf04fc42	1838	if (timeoutCallbackChain) {
vcoubard	1131:692ddf04fc42	1839	timeoutCallbackChain(source);
vcoubard	1131:692ddf04fc42	1840	}
vcoubard	1131:692ddf04fc42	1841	}
vcoubard	1131:692ddf04fc42	1842
vcoubard	1131:692ddf04fc42	1843	protected:
vcoubard	1183:1589830dbdb7	1844	/**
vcoubard	1183:1589830dbdb7	1845	* Currently set advertising parameters.
vcoubard	1183:1589830dbdb7	1846	*/
vcoubard	1131:692ddf04fc42	1847	GapAdvertisingParams _advParams;
vcoubard	1183:1589830dbdb7	1848	/**
vcoubard	1183:1589830dbdb7	1849	* Currently set advertising data.
vcoubard	1183:1589830dbdb7	1850	*/
vcoubard	1131:692ddf04fc42	1851	GapAdvertisingData _advPayload;
vcoubard	1183:1589830dbdb7	1852	/**
vcoubard	1183:1589830dbdb7	1853	* Currently set scanning parameters.
vcoubard	1183:1589830dbdb7	1854	*/
vcoubard	1131:692ddf04fc42	1855	GapScanningParams _scanningParams;
vcoubard	1183:1589830dbdb7	1856	/**
vcoubard	1183:1589830dbdb7	1857	* Currently set scan response data.
vcoubard	1183:1589830dbdb7	1858	*/
vcoubard	1131:692ddf04fc42	1859	GapAdvertisingData _scanResponse;
vcoubard	1131:692ddf04fc42	1860
vcoubard	1180:e11b058d005e	1861	/**
vcoubard	1180:e11b058d005e	1862	* Total number of open connections.
vcoubard	1180:e11b058d005e	1863	*/
vcoubard	1180:e11b058d005e	1864	uint8_t connectionCount;
vcoubard	1183:1589830dbdb7	1865	/**
vcoubard	1183:1589830dbdb7	1866	* The current GAP state.
vcoubard	1183:1589830dbdb7	1867	*/
vcoubard	1131:692ddf04fc42	1868	GapState_t state;
vcoubard	1183:1589830dbdb7	1869	/**
vcoubard	1183:1589830dbdb7	1870	* Whether active scanning is set. This is used to fetch the scan response
vcoubard	1183:1589830dbdb7	1871	* from a peer if possible.
vcoubard	1183:1589830dbdb7	1872	*/
vcoubard	1131:692ddf04fc42	1873	bool scanningActive;
vcoubard	1131:692ddf04fc42	1874
vcoubard	1131:692ddf04fc42	1875	protected:
vcoubard	1183:1589830dbdb7	1876	/**
vcoubard	1183:1589830dbdb7	1877	* Callchain containing all registered callback handlers for timeout
vcoubard	1183:1589830dbdb7	1878	* events.
vcoubard	1183:1589830dbdb7	1879	*/
vcoubard	1131:692ddf04fc42	1880	TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard	1183:1589830dbdb7	1881	/**
vcoubard	1183:1589830dbdb7	1882	* The registered callback handler for radio notification events.
vcoubard	1183:1589830dbdb7	1883	*/
vcoubard	1131:692ddf04fc42	1884	RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard	1183:1589830dbdb7	1885	/**
vcoubard	1183:1589830dbdb7	1886	* The registered callback handler for scanned advertisement packet
vcoubard	1183:1589830dbdb7	1887	* notifications.
vcoubard	1183:1589830dbdb7	1888	*/
vcoubard	1131:692ddf04fc42	1889	AdvertisementReportCallback_t onAdvertisementReport;
vcoubard	1183:1589830dbdb7	1890	/**
vcoubard	1183:1589830dbdb7	1891	* Callchain containing all registered callback handlers for connection
vcoubard	1183:1589830dbdb7	1892	* events.
vcoubard	1183:1589830dbdb7	1893	*/
vcoubard	1131:692ddf04fc42	1894	ConnectionEventCallbackChain_t connectionCallChain;
vcoubard	1183:1589830dbdb7	1895	/**
vcoubard	1183:1589830dbdb7	1896	* Callchain containing all registered callback handlers for disconnection
vcoubard	1183:1589830dbdb7	1897	* events.
vcoubard	1183:1589830dbdb7	1898	*/
vcoubard	1131:692ddf04fc42	1899	DisconnectionEventCallbackChain_t disconnectionCallChain;
vcoubard	1131:692ddf04fc42	1900
vcoubard	1131:692ddf04fc42	1901	private:
vcoubard	1183:1589830dbdb7	1902	/**
vcoubard	1183:1589830dbdb7	1903	* Callchain containing all registered callback handlers for shutdown
vcoubard	1183:1589830dbdb7	1904	* events.
vcoubard	1183:1589830dbdb7	1905	*/
vcoubard	1135:22aada733dbd	1906	GapShutdownCallbackChain_t shutdownCallChain;
vcoubard	1135:22aada733dbd	1907
vcoubard	1135:22aada733dbd	1908	private:
vcoubard	1131:692ddf04fc42	1909	/* Disallow copy and assignment. */
vcoubard	1131:692ddf04fc42	1910	Gap(const Gap &);
vcoubard	1131:692ddf04fc42	1911	Gap& operator=(const Gap &);
vcoubard	1131:692ddf04fc42	1912	};
vcoubard	1131:692ddf04fc42	1913
rgrover1	710:b2e1a2660ec2	1914	#endif // ifndef __GAP_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	19 Dec 2017
Imports:	6
Forks:	0
Commits:	1210
Dependents:	0
Dependencies:	0
Followers:	1

ble/Gap.h@1188:039621a96054, 2016-04-06 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning