Diff: lwip/netif/ppp/ppp.h

Revision:

0:d26c1b55cfca

diff -r 000000000000 -r d26c1b55cfca lwip/netif/ppp/ppp.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lwip/netif/ppp/ppp.h	Sun Jun 19 16:23:40 2016 +0000
@@ -0,0 +1,201 @@
+/*****************************************************************************
+* ppp.h - Network Point to Point Protocol header file.
+*
+* Copyright (c) 2003 by Marc Boucher, Services Informatiques (MBSI) inc.
+* portions Copyright (c) 1997 Global Election Systems Inc.
+*
+* The authors hereby grant permission to use, copy, modify, distribute,
+* and license this software and its documentation for any purpose, provided
+* that existing copyright notices are retained in all copies and that this
+* notice and the following disclaimer are included verbatim in any 
+* distributions. No written agreement, license, or royalty fee is required
+* for any of the authorized uses.
+*
+* THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS *AS IS* AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
+* IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+* REVISION HISTORY
+*
+* 03-01-01 Marc Boucher <marc@mbsi.ca>
+*   Ported to lwIP.
+* 97-11-05 Guy Lancaster <glanca@gesn.com>, Global Election Systems Inc.
+*   Original derived from BSD codes.
+*****************************************************************************/
+
+#ifndef PPP_H
+#define PPP_H
+
+#include "lwip/opt.h"
+
+#if PPP_SUPPORT /* don't build if not configured for use in lwipopts.h */
+
+#include "lwip/def.h"
+#include "lwip/sio.h"
+#include "lwip/stats.h"
+#include "lwip/mem.h"
+#include "lwip/netif.h"
+#include "lwip/sys.h"
+#include "lwip/timers.h"
+
+
+#ifndef __u_char_defined
+
+/* Type definitions for BSD code. */
+typedef unsigned long  u_long;
+typedef unsigned int   u_int;
+typedef unsigned short u_short;
+typedef unsigned char  u_char;
+
+#endif
+
+
+/*************************
+*** PUBLIC DEFINITIONS ***
+*************************/
+
+/* Error codes. */
+#define PPPERR_NONE      0 /* No error. */
+#define PPPERR_PARAM    -1 /* Invalid parameter. */
+#define PPPERR_OPEN     -2 /* Unable to open PPP session. */
+#define PPPERR_DEVICE   -3 /* Invalid I/O device for PPP. */
+#define PPPERR_ALLOC    -4 /* Unable to allocate resources. */
+#define PPPERR_USER     -5 /* User interrupt. */
+#define PPPERR_CONNECT  -6 /* Connection lost. */
+#define PPPERR_AUTHFAIL -7 /* Failed authentication challenge. */
+#define PPPERR_PROTOCOL -8 /* Failed to meet protocol. */
+
+/*
+ * PPP IOCTL commands.
+ */
+/*
+ * Get the up status - 0 for down, non-zero for up.  The argument must
+ * point to an int.
+ */
+#define PPPCTLG_UPSTATUS 100 /* Get the up status - 0 down else up */
+#define PPPCTLS_ERRCODE  101 /* Set the error code */
+#define PPPCTLG_ERRCODE  102 /* Get the error code */
+#define PPPCTLG_FD       103 /* Get the fd associated with the ppp */
+
+/************************
+*** PUBLIC DATA TYPES ***
+************************/
+
+struct ppp_addrs {
+  ip_addr_t our_ipaddr, his_ipaddr, netmask, dns1, dns2;
+};
+
+
+/***********************
+*** PUBLIC FUNCTIONS ***
+***********************/
+
+/* Initialize the PPP subsystem. */
+void pppInit(void);
+
+/* Warning: Using PPPAUTHTYPE_ANY might have security consequences.
+ * RFC 1994 says:
+ *
+ * In practice, within or associated with each PPP server, there is a
+ * database which associates "user" names with authentication
+ * information ("secrets").  It is not anticipated that a particular
+ * named user would be authenticated by multiple methods.  This would
+ * make the user vulnerable to attacks which negotiate the least secure
+ * method from among a set (such as PAP rather than CHAP).  If the same
+ * secret was used, PAP would reveal the secret to be used later with
+ * CHAP.
+ *
+ * Instead, for each user name there should be an indication of exactly
+ * one method used to authenticate that user name.  If a user needs to
+ * make use of different authentication methods under different
+ * circumstances, then distinct user names SHOULD be employed, each of
+ * which identifies exactly one authentication method.
+ *
+ */
+enum pppAuthType {
+    PPPAUTHTYPE_NONE,
+    PPPAUTHTYPE_ANY,
+    PPPAUTHTYPE_PAP,
+    PPPAUTHTYPE_CHAP
+};
+
+void pppSetAuth(enum pppAuthType authType, const char *user, const char *passwd);
+
+/* Link status callback function prototype */
+typedef void (*pppLinkStatusCB_fn)(void *ctx, int errCode, void *arg);
+
+#if PPPOS_SUPPORT
+/*
+ * Open a new PPP connection using the given serial I/O device.
+ * This initializes the PPP control block but does not
+ * attempt to negotiate the LCP session.
+ * Return a new PPP connection descriptor on success or
+ * an error code (negative) on failure. 
+ */
+int pppOverSerialOpen(sio_fd_t fd, pppLinkStatusCB_fn linkStatusCB, void *linkStatusCtx);
+#endif /* PPPOS_SUPPORT */
+
+#if PPPOE_SUPPORT
+/*
+ * Open a new PPP Over Ethernet (PPPOE) connection.
+ */
+int pppOverEthernetOpen(struct netif *ethif, const char *service_name, const char *concentrator_name,
+                        pppLinkStatusCB_fn linkStatusCB, void *linkStatusCtx);
+#endif /* PPPOE_SUPPORT */
+
+/* for source code compatibility */
+#define pppOpen(fd,cb,ls) pppOverSerialOpen(fd,cb,ls)
+
+/*
+ * Close a PPP connection and release the descriptor. 
+ * Any outstanding packets in the queues are dropped.
+ * Return 0 on success, an error code on failure. 
+ */
+int pppClose(int pd);
+
+/*
+ * Indicate to the PPP process that the line has disconnected.
+ */
+void pppSigHUP(int pd);
+
+/*
+ * Get and set parameters for the given connection.
+ * Return 0 on success, an error code on failure. 
+ */
+int  pppIOCtl(int pd, int cmd, void *arg);
+
+/*
+ * Return the Maximum Transmission Unit for the given PPP connection.
+ */
+u_short pppMTU(int pd);
+
+#if PPPOS_SUPPORT && !PPP_INPROC_OWNTHREAD
+/*
+ * PPP over Serial: this is the input function to be called for received data.
+ * If PPP_INPROC_OWNTHREAD==1, a seperate input thread using the blocking
+ * sio_read() is used, so this is deactivated.
+ */
+void pppos_input(int pd, u_char* data, int len);
+#endif /* PPPOS_SUPPORT && !PPP_INPROC_OWNTHREAD */
+
+
+#if LWIP_NETIF_STATUS_CALLBACK
+/* Set an lwIP-style status-callback for the selected PPP device */
+void ppp_set_netif_statuscallback(int pd, netif_status_callback_fn status_callback);
+#endif /* LWIP_NETIF_STATUS_CALLBACK */
+#if LWIP_NETIF_LINK_CALLBACK
+/* Set an lwIP-style link-callback for the selected PPP device */
+void ppp_set_netif_linkcallback(int pd, netif_status_callback_fn link_callback);
+#endif /* LWIP_NETIF_LINK_CALLBACK */
+
+#endif /* PPP_SUPPORT */
+
+#endif /* PPP_H */