x_nucleo_idb0xa1_targets.h

00001 /**
00002   ******************************************************************************
00003   * @file    x_nucleo_idb0xa1_targets.h
00004   * @author  AST / EST
00005   * @version V0.0.1
00006   * @date    24-July-2015
00007   * @brief   This header file is intended to manage the differences between 
00008   *          the different supported base-boards which might mount the
00009   *          X_NUCLEO_IDB0XA1 BlueNRG BLE Expansion Board.
00010   ******************************************************************************
00011   * @attention
00012   *
00013   * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
00014   *
00015   * Redistribution and use in source and binary forms, with or without modification,
00016   * are permitted provided that the following conditions are met:
00017   *   1. Redistributions of source code must retain the above copyright notice,
00018   *      this list of conditions and the following disclaimer.
00019   *   2. Redistributions in binary form must reproduce the above copyright notice,
00020   *      this list of conditions and the following disclaimer in the documentation
00021   *      and/or other materials provided with the distribution.
00022   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00023   *      may be used to endorse or promote products derived from this software
00024   *      without specific prior written permission.
00025   *
00026   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00027   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00028   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00029   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00030   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00031   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00032   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00033   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00034   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00035   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00036   *
00037   ******************************************************************************
00038   */ 
00039  
00040 /* Define to prevent from recursive inclusion --------------------------------*/
00041 #ifndef _X_NUCLEO_IDB0XA1_TARGETS_H_
00042 #define _X_NUCLEO_IDB0XA1_TARGETS_H_
00043  
00044 /*** SPI ***/
00045 /* Use Arduino I2C Connectors */
00046 #define IDB0XA1_PIN_SPI_MOSI   (D11)
00047 #define IDB0XA1_PIN_SPI_MISO   (D12)
00048 #define IDB0XA1_PIN_SPI_nCS    (A1)
00049 #define IDB0XA1_PIN_SPI_RESET  (D7)
00050 #define IDB0XA1_PIN_SPI_IRQ    (A0)
00051 
00052 /* NOTE: Define macro 'IDB0XA1_D13_PATCH' if you want to compile for a specifically
00053          modified version of the X_NUCLEO_IDB0XA1 expansion board in
00054          which pin 'D13' (rather than the standard pin 'D3') is used 
00055          in order to provide the SPI serial clock.
00056      Expansion boards modified in this way allow to be used on almost
00057      any Arduino-compliant base board.
00058 */
00059 //#if defined(IDB0XA1_D13_PATCH)
00060 #define IDB0XA1_PIN_SPI_SCK    (D13)
00061 //#else // !defined(IDB0XA1_D13_PATCH)
00062 //#define IDB0XA1_PIN_SPI_SCK    (D3)
00063 //#endif // !defined(IDB0XA1_D13_PATCH)
00064 
00065 /* NOTE: Stack Mode 0x04 allows Simultaneous Scanning and Advertisement (SSAdv)
00066          Define macro 'SSADV' to enable it
00067 */
00068 #define SSADV
00069 #if defined(SSADV)
00070 #define IDB0XA1_STACK_MODE (0x04)
00071 #else
00072 #define IDB0XA1_STACK_MODE (0x02)
00073 #endif
00074 
00075 #endif // _X_NUCLEO_IDB0XA1_TARGETS_H_