John Karatka
mbed
Fork of
mbed-dev
by 
mbed official
Diff: targets/TARGET_NUVOTON/TARGET_M451/spi_api.c
- Revision:
- 149:156823d33999
- Child:
- 153:fa9ff456f731
diff -r 21d94c44109e -r 156823d33999 targets/TARGET_NUVOTON/TARGET_M451/spi_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NUVOTON/TARGET_M451/spi_api.c Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,775 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015-2016 Nuvoton
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "spi_api.h"
+
+#if DEVICE_SPI
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "nu_modutil.h"
+#include "nu_miscutil.h"
+#include "nu_bitutil.h"
+
+#if DEVICE_SPI_ASYNCH
+#include "dma_api.h"
+#include "dma.h"
+#endif
+
+#define NU_SPI_FRAME_MIN 8
+#define NU_SPI_FRAME_MAX 32
+#define NU_SPI_FIFO_DEPTH 8
+
+struct nu_spi_var {
+#if DEVICE_SPI_ASYNCH
+ uint8_t pdma_perp_tx;
+ uint8_t pdma_perp_rx;
+#endif
+};
+
+static struct nu_spi_var spi0_var = {
+#if DEVICE_SPI_ASYNCH
+ .pdma_perp_tx = PDMA_SPI0_TX,
+ .pdma_perp_rx = PDMA_SPI0_RX
+#endif
+};
+static struct nu_spi_var spi1_var = {
+#if DEVICE_SPI_ASYNCH
+ .pdma_perp_tx = PDMA_SPI1_TX,
+ .pdma_perp_rx = PDMA_SPI1_RX
+#endif
+};
+static struct nu_spi_var spi2_var = {
+#if DEVICE_SPI_ASYNCH
+ .pdma_perp_tx = PDMA_SPI2_TX,
+ .pdma_perp_rx = PDMA_SPI2_RX
+#endif
+};
+
+#if DEVICE_SPI_ASYNCH
+static void spi_enable_vector_interrupt(spi_t *obj, uint32_t handler, uint8_t enable);
+static void spi_master_enable_interrupt(spi_t *obj, uint8_t enable);
+static uint32_t spi_master_write_asynch(spi_t *obj, uint32_t tx_limit);
+static uint32_t spi_master_read_asynch(spi_t *obj);
+static uint32_t spi_event_check(spi_t *obj);
+static void spi_enable_event(spi_t *obj, uint32_t event, uint8_t enable);
+static void spi_buffer_set(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length);
+static void spi_check_dma_usage(DMAUsage *dma_usage, int *dma_ch_tx, int *dma_ch_rx);
+static uint8_t spi_get_data_width(spi_t *obj);
+static int spi_is_tx_complete(spi_t *obj);
+static int spi_is_rx_complete(spi_t *obj);
+static int spi_writeable(spi_t * obj);
+static int spi_readable(spi_t * obj);
+static void spi_dma_handler_tx(uint32_t id, uint32_t event_dma);
+static void spi_dma_handler_rx(uint32_t id, uint32_t event_dma);
+#endif
+
+static uint32_t spi_modinit_mask = 0;
+
+static const struct nu_modinit_s spi_modinit_tab[] = {
+ {SPI_0, SPI0_MODULE, CLK_CLKSEL2_SPI0SEL_PCLK0, MODULE_NoMsk, SPI0_RST, SPI0_IRQn, &spi0_var},
+ {SPI_1, SPI1_MODULE, CLK_CLKSEL2_SPI1SEL_PCLK1, MODULE_NoMsk, SPI1_RST, SPI1_IRQn, &spi1_var},
+ {SPI_2, SPI2_MODULE, CLK_CLKSEL2_SPI2SEL_PCLK0, MODULE_NoMsk, SPI2_RST, SPI2_IRQn, &spi2_var},
+
+ {NC, 0, 0, 0, 0, (IRQn_Type) 0, NULL}
+};
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
+ // Determine which SPI_x the pins are used for
+ uint32_t spi_mosi = pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+ uint32_t spi_miso = pinmap_peripheral(miso, PinMap_SPI_MISO);
+ uint32_t spi_sclk = pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+ uint32_t spi_ssel = pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+ uint32_t spi_data = pinmap_merge(spi_mosi, spi_miso);
+ uint32_t spi_cntl = pinmap_merge(spi_sclk, spi_ssel);
+ obj->spi.spi = (SPIName) pinmap_merge(spi_data, spi_cntl);
+ MBED_ASSERT((int)obj->spi.spi != NC);
+
+ const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab);
+ MBED_ASSERT(modinit != NULL);
+ MBED_ASSERT(modinit->modname == obj->spi.spi);
+
+ // Reset this module
+ SYS_ResetModule(modinit->rsetidx);
+
+ // Select IP clock source
+ CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv);
+ // Enable IP clock
+ CLK_EnableModuleClock(modinit->clkidx);
+
+ //SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ pinmap_pinout(mosi, PinMap_SPI_MOSI);
+ pinmap_pinout(miso, PinMap_SPI_MISO);
+ pinmap_pinout(sclk, PinMap_SPI_SCLK);
+ pinmap_pinout(ssel, PinMap_SPI_SSEL);
+
+ obj->spi.pin_mosi = mosi;
+ obj->spi.pin_miso = miso;
+ obj->spi.pin_sclk = sclk;
+ obj->spi.pin_ssel = ssel;
+
+
+ // Configure the SPI data format and frequency
+ //spi_format(obj, 8, 0, SPI_MSB); // 8 bits, mode 0
+ //spi_frequency(obj, 1000000);
+
+#if DEVICE_SPI_ASYNCH
+ obj->spi.dma_usage = DMA_USAGE_NEVER;
+ obj->spi.event = 0;
+ obj->spi.dma_chn_id_tx = DMA_ERROR_OUT_OF_CHANNELS;
+ obj->spi.dma_chn_id_rx = DMA_ERROR_OUT_OF_CHANNELS;
+#endif
+
+ // Mark this module to be inited.
+ int i = modinit - spi_modinit_tab;
+ spi_modinit_mask |= 1 << i;
+}
+
+void spi_free(spi_t *obj)
+{
+#if DEVICE_SPI_ASYNCH
+ if (obj->spi.dma_chn_id_tx != DMA_ERROR_OUT_OF_CHANNELS) {
+ dma_channel_free(obj->spi.dma_chn_id_tx);
+ obj->spi.dma_chn_id_tx = DMA_ERROR_OUT_OF_CHANNELS;
+ }
+ if (obj->spi.dma_chn_id_rx != DMA_ERROR_OUT_OF_CHANNELS) {
+ dma_channel_free(obj->spi.dma_chn_id_rx);
+ obj->spi.dma_chn_id_rx = DMA_ERROR_OUT_OF_CHANNELS;
+ }
+#endif
+
+ SPI_Close((SPI_T *) NU_MODBASE(obj->spi.spi));
+
+ const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab);
+ MBED_ASSERT(modinit != NULL);
+ MBED_ASSERT(modinit->modname == obj->spi.spi);
+
+ SPI_DisableInt(((SPI_T *) NU_MODBASE(obj->spi.spi)), (SPI_FIFO_RXOV_INT_MASK | SPI_FIFO_RXTH_INT_MASK | SPI_FIFO_TXTH_INT_MASK));
+ NVIC_DisableIRQ(modinit->irq_n);
+
+ // Disable IP clock
+ CLK_DisableModuleClock(modinit->clkidx);
+
+ //((struct nu_spi_var *) modinit->var)->obj = NULL;
+
+ // Mark this module to be deinited.
+ int i = modinit - spi_modinit_tab;
+ spi_modinit_mask &= ~(1 << i);
+}
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+ MBED_ASSERT(bits >= NU_SPI_FRAME_MIN && bits <= NU_SPI_FRAME_MAX);
+
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ // NOTE 1: All configurations should be ready before enabling SPI peripheral.
+ // NOTE 2: Re-configuration is allowed only as SPI peripheral is idle.
+ while (SPI_IS_BUSY(spi_base));
+ SPI_DISABLE(spi_base);
+
+ SPI_Open(spi_base,
+ slave ? SPI_SLAVE : SPI_MASTER,
+ (mode == 0) ? SPI_MODE_0 : (mode == 1) ? SPI_MODE_1 : (mode == 2) ? SPI_MODE_2 : SPI_MODE_3,
+ bits,
+ SPI_GetBusClock(spi_base));
+ // NOTE: Hardcode to be MSB first.
+ SPI_SET_MSB_FIRST(spi_base);
+
+ if (! slave) {
+ // Master
+ if (obj->spi.pin_ssel != NC) {
+ // Configure SS as low active.
+ SPI_EnableAutoSS(spi_base, SPI_SS, SPI_SS_ACTIVE_LOW);
+ }
+ else {
+ SPI_DisableAutoSS(spi_base);
+ }
+ }
+ else {
+ // Slave
+ // Configure SS as low active.
+ spi_base->SSCTL &= ~SPI_SSCTL_SSACTPOL_Msk;
+ }
+
+ // NOTE: M451's SPI_Open() will enable SPI transfer (SPI_CTL_SPIEN_Msk). This will violate judgement of spi_active(). Disable it.
+ SPI_DISABLE(spi_base);
+}
+
+void spi_frequency(spi_t *obj, int hz)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ while (SPI_IS_BUSY(spi_base));
+ SPI_DISABLE(spi_base);
+
+ SPI_SetBusClock((SPI_T *) NU_MODBASE(obj->spi.spi), hz);
+}
+
+
+int spi_master_write(spi_t *obj, int value)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ // NOTE: Data in receive FIFO can be read out via ICE.
+ SPI_ENABLE(spi_base);
+
+ // Wait for tx buffer empty
+ while(! spi_writeable(obj));
+ SPI_WRITE_TX(spi_base, value);
+
+ // Wait for rx buffer full
+ while (! spi_readable(obj));
+ int value2 = SPI_READ_RX(spi_base);
+
+ SPI_DISABLE(spi_base);
+
+ return value2;
+}
+
+#if DEVICE_SPISLAVE
+int spi_slave_receive(spi_t *obj)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ SPI_ENABLE(spi_base);
+
+ return spi_readable(obj);
+};
+
+int spi_slave_read(spi_t *obj)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ SPI_ENABLE(spi_base);
+
+ // Wait for rx buffer full
+ while (! spi_readable(obj));
+ int value = SPI_READ_RX(spi_base);
+ return value;
+}
+
+void spi_slave_write(spi_t *obj, int value)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ SPI_ENABLE(spi_base);
+
+ // Wait for tx buffer empty
+ while(! spi_writeable(obj));
+ SPI_WRITE_TX(spi_base, value);
+}
+#endif
+
+#if DEVICE_SPI_ASYNCH
+void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint)
+{
+ //MBED_ASSERT(bits >= NU_SPI_FRAME_MIN && bits <= NU_SPI_FRAME_MAX);
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+ SPI_SET_DATA_WIDTH(spi_base, bit_width);
+
+ obj->spi.dma_usage = hint;
+ spi_check_dma_usage(&obj->spi.dma_usage, &obj->spi.dma_chn_id_tx, &obj->spi.dma_chn_id_rx);
+ uint32_t data_width = spi_get_data_width(obj);
+ // Conditions to go DMA way:
+ // (1) No DMA support for non-8 multiple data width.
+ // (2) tx length >= rx length. Otherwise, as tx DMA is done, no bus activity for remaining rx.
+ if ((data_width % 8) ||
+ (tx_length < rx_length)) {
+ obj->spi.dma_usage = DMA_USAGE_NEVER;
+ dma_channel_free(obj->spi.dma_chn_id_tx);
+ obj->spi.dma_chn_id_tx = DMA_ERROR_OUT_OF_CHANNELS;
+ dma_channel_free(obj->spi.dma_chn_id_rx);
+ obj->spi.dma_chn_id_rx = DMA_ERROR_OUT_OF_CHANNELS;
+ }
+
+ // SPI IRQ is necessary for both interrupt way and DMA way
+ spi_enable_event(obj, event, 1);
+ spi_buffer_set(obj, tx, tx_length, rx, rx_length);
+
+ SPI_ENABLE(spi_base);
+
+ if (obj->spi.dma_usage == DMA_USAGE_NEVER) {
+ // Interrupt way
+ spi_master_write_asynch(obj, NU_SPI_FIFO_DEPTH / 2);
+ spi_enable_vector_interrupt(obj, handler, 1);
+ spi_master_enable_interrupt(obj, 1);
+ } else {
+ // DMA way
+ const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab);
+ MBED_ASSERT(modinit != NULL);
+ MBED_ASSERT(modinit->modname == obj->spi.spi);
+
+ // Configure tx DMA
+ PDMA->CHCTL |= 1 << obj->spi.dma_chn_id_tx; // Enable this DMA channel
+ PDMA_SetTransferMode(obj->spi.dma_chn_id_tx,
+ ((struct nu_spi_var *) modinit->var)->pdma_perp_tx, // Peripheral connected to this PDMA
+ 0, // Scatter-gather disabled
+ 0); // Scatter-gather descriptor address
+ PDMA_SetTransferCnt(obj->spi.dma_chn_id_tx,
+ (data_width == 8) ? PDMA_WIDTH_8 : (data_width == 16) ? PDMA_WIDTH_16 : PDMA_WIDTH_32,
+ tx_length);
+ PDMA_SetTransferAddr(obj->spi.dma_chn_id_tx,
+ (uint32_t) tx, // NOTE:
+ // NUC472: End of source address
+ // M451: Start of source address
+ PDMA_SAR_INC, // Source address incremental
+ (uint32_t) &spi_base->TX, // Destination address
+ PDMA_DAR_FIX); // Destination address fixed
+ PDMA_SetBurstType(obj->spi.dma_chn_id_tx,
+ PDMA_REQ_SINGLE, // Single mode
+ 0); // Burst size
+ PDMA_EnableInt(obj->spi.dma_chn_id_tx,
+ PDMA_INT_TRANS_DONE); // Interrupt type
+ // Register DMA event handler
+ dma_set_handler(obj->spi.dma_chn_id_tx, (uint32_t) spi_dma_handler_tx, (uint32_t) obj, DMA_EVENT_ALL);
+
+ // Configure rx DMA
+ PDMA->CHCTL |= 1 << obj->spi.dma_chn_id_rx; // Enable this DMA channel
+ PDMA_SetTransferMode(obj->spi.dma_chn_id_rx,
+ ((struct nu_spi_var *) modinit->var)->pdma_perp_rx, // Peripheral connected to this PDMA
+ 0, // Scatter-gather disabled
+ 0); // Scatter-gather descriptor address
+ PDMA_SetTransferCnt(obj->spi.dma_chn_id_rx,
+ (data_width == 8) ? PDMA_WIDTH_8 : (data_width == 16) ? PDMA_WIDTH_16 : PDMA_WIDTH_32,
+ rx_length);
+ PDMA_SetTransferAddr(obj->spi.dma_chn_id_rx,
+ (uint32_t) &spi_base->RX, // Source address
+ PDMA_SAR_FIX, // Source address fixed
+ (uint32_t) rx, // NOTE:
+ // NUC472: End of destination address
+ // M451: Start of destination address
+ PDMA_DAR_INC); // Destination address incremental
+ PDMA_SetBurstType(obj->spi.dma_chn_id_rx,
+ PDMA_REQ_SINGLE, // Single mode
+ 0); // Burst size
+ PDMA_EnableInt(obj->spi.dma_chn_id_rx,
+ PDMA_INT_TRANS_DONE); // Interrupt type
+ // Register DMA event handler
+ dma_set_handler(obj->spi.dma_chn_id_rx, (uint32_t) spi_dma_handler_rx, (uint32_t) obj, DMA_EVENT_ALL);
+
+ // Start tx/rx DMA transfer
+ spi_enable_vector_interrupt(obj, handler, 1);
+ // NOTE: It is safer to start rx DMA first and then tx DMA. Otherwise, receive FIFO is subject to overflow by tx DMA.
+ SPI_TRIGGER_RX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi)));
+ SPI_TRIGGER_TX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi)));
+ spi_master_enable_interrupt(obj, 1);
+ }
+}
+
+/**
+ * Abort an SPI transfer
+ * This is a helper function for event handling. When any of the events listed occurs, the HAL will abort any ongoing
+ * transfers
+ * @param[in] obj The SPI peripheral to stop
+ */
+void spi_abort_asynch(spi_t *obj)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ if (obj->spi.dma_usage != DMA_USAGE_NEVER) {
+ // Receive FIFO Overrun in case of tx length > rx length on DMA way
+ if (spi_base->STATUS & SPI_STATUS_RXOVIF_Msk) {
+ spi_base->STATUS = SPI_STATUS_RXOVIF_Msk;
+ }
+
+ if (obj->spi.dma_chn_id_tx != DMA_ERROR_OUT_OF_CHANNELS) {
+ PDMA_DisableInt(obj->spi.dma_chn_id_tx, 0);
+ // FIXME: On NUC472, next PDMA transfer will fail with PDMA_STOP() called. Cause is unknown.
+ //PDMA_STOP(obj->spi.dma_chn_id_tx);
+ PDMA->CHCTL &= ~(1 << obj->spi.dma_chn_id_tx);
+ }
+ SPI_DISABLE_TX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi)));
+
+ if (obj->spi.dma_chn_id_rx != DMA_ERROR_OUT_OF_CHANNELS) {
+ PDMA_DisableInt(obj->spi.dma_chn_id_rx, 0);
+ // FIXME: On NUC472, next PDMA transfer will fail with PDMA_STOP() called. Cause is unknown.
+ //PDMA_STOP(obj->spi.dma_chn_id_rx);
+ PDMA->CHCTL &= ~(1 << obj->spi.dma_chn_id_rx);
+ }
+ SPI_DISABLE_RX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi)));
+ }
+
+ // Necessary for both interrupt way and DMA way
+ spi_enable_vector_interrupt(obj, 0, 0);
+ spi_master_enable_interrupt(obj, 0);
+
+ // FIXME: SPI H/W may get out of state without the busy check.
+ while (SPI_IS_BUSY(spi_base));
+ SPI_DISABLE(spi_base);
+
+ SPI_ClearRxFIFO(spi_base);
+ SPI_ClearTxFIFO(spi_base);
+}
+
+/**
+ * Handle the SPI interrupt
+ * Read frames until the RX FIFO is empty. Write at most as many frames as were read. This way,
+ * it is unlikely that the RX FIFO will overflow.
+ * @param[in] obj The SPI peripheral that generated the interrupt
+ * @return
+ */
+uint32_t spi_irq_handler_asynch(spi_t *obj)
+{
+ // Check for SPI events
+ uint32_t event = spi_event_check(obj);
+ if (event) {
+ spi_abort_asynch(obj);
+ }
+
+ return (obj->spi.event & event) | ((event & SPI_EVENT_COMPLETE) ? SPI_EVENT_INTERNAL_TRANSFER_COMPLETE : 0);
+}
+
+uint8_t spi_active(spi_t *obj)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+ // FIXME
+ /*
+ if ((obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length)
+ || (obj->tx_buff.buffer && obj->tx_buff.pos < obj->tx_buff.length) ){
+ return 1;
+ } else {
+ // interrupts are disabled, all transaction have been completed
+ // TODO: checking rx fifo, it reports data eventhough RFDF is not set
+ return DSPI_HAL_GetIntMode(obj->spi.address, kDspiRxFifoDrainRequest);
+ }*/
+
+ //return SPI_IS_BUSY(spi_base);
+ return (spi_base->CTL & SPI_CTL_SPIEN_Msk);
+}
+
+int spi_allow_powerdown(void)
+{
+ uint32_t modinit_mask = spi_modinit_mask;
+ while (modinit_mask) {
+ int spi_idx = nu_ctz(modinit_mask);
+ const struct nu_modinit_s *modinit = spi_modinit_tab + spi_idx;
+ if (modinit->modname != NC) {
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(modinit->modname);
+ // Disallow entering power-down mode if SPI transfer is enabled.
+ if (spi_base->CTL & SPI_CTL_SPIEN_Msk) {
+ return 0;
+ }
+ }
+ modinit_mask &= ~(1 << spi_idx);
+ }
+
+ return 1;
+}
+
+static int spi_writeable(spi_t * obj)
+{
+ // Receive FIFO must not be full to avoid receive FIFO overflow on next transmit/receive
+ //return (! SPI_GET_TX_FIFO_FULL_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi)))) && (SPI_GET_RX_FIFO_COUNT(((SPI_T *) NU_MODBASE(obj->spi.spi))) < NU_SPI_FIFO_DEPTH);
+ return (! SPI_GET_TX_FIFO_FULL_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi))));
+}
+
+static int spi_readable(spi_t * obj)
+{
+ return ! SPI_GET_RX_FIFO_EMPTY_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi)));
+}
+
+static void spi_enable_event(spi_t *obj, uint32_t event, uint8_t enable)
+{
+ obj->spi.event &= ~SPI_EVENT_ALL;
+ obj->spi.event |= (event & SPI_EVENT_ALL);
+ if (event & SPI_EVENT_RX_OVERFLOW) {
+ SPI_EnableInt((SPI_T *) NU_MODBASE(obj->spi.spi), SPI_FIFO_RXOV_INT_MASK);
+ }
+}
+
+static void spi_enable_vector_interrupt(spi_t *obj, uint32_t handler, uint8_t enable)
+{
+ const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab);
+ MBED_ASSERT(modinit != NULL);
+ MBED_ASSERT(modinit->modname == obj->spi.spi);
+
+ if (enable) {
+ NVIC_SetVector(modinit->irq_n, handler);
+ NVIC_EnableIRQ(modinit->irq_n);
+ }
+ else {
+ //NVIC_SetVector(modinit->irq_n, handler);
+ NVIC_DisableIRQ(modinit->irq_n);
+ }
+}
+
+static void spi_master_enable_interrupt(spi_t *obj, uint8_t enable)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ if (enable) {
+ // For SPI0, it could be 0 ~ 7. For SPI1 and SPI2, it could be 0 ~ 3.
+ if (spi_base == (SPI_T *) SPI0_BASE) {
+ SPI_SetFIFO(spi_base, 4, 4);
+ }
+ else {
+ SPI_SetFIFO(spi_base, 2, 2);
+ }
+ //SPI_SET_SUSPEND_CYCLE(spi_base, 4);
+ // Enable tx/rx FIFO threshold interrupt
+ SPI_EnableInt(spi_base, SPI_FIFO_RXTH_INT_MASK | SPI_FIFO_TXTH_INT_MASK);
+ }
+ else {
+ SPI_DisableInt(spi_base, SPI_FIFO_RXTH_INT_MASK | SPI_FIFO_TXTH_INT_MASK);
+ }
+}
+
+static uint32_t spi_event_check(spi_t *obj)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+ uint32_t event = 0;
+
+ if (obj->spi.dma_usage == DMA_USAGE_NEVER) {
+ uint32_t n_rec = spi_master_read_asynch(obj);
+ spi_master_write_asynch(obj, n_rec);
+ }
+
+ if (spi_is_tx_complete(obj) && spi_is_rx_complete(obj)) {
+ event |= SPI_EVENT_COMPLETE;
+ }
+
+ // Receive FIFO Overrun
+ if (spi_base->STATUS & SPI_STATUS_RXOVIF_Msk) {
+ spi_base->STATUS = SPI_STATUS_RXOVIF_Msk;
+ // In case of tx length > rx length on DMA way
+ if (obj->spi.dma_usage == DMA_USAGE_NEVER) {
+ event |= SPI_EVENT_RX_OVERFLOW;
+ }
+ }
+
+ // Receive Time-Out
+ if (spi_base->STATUS & SPI_STATUS_RXTOIF_Msk) {
+ spi_base->STATUS = SPI_STATUS_RXTOIF_Msk;
+ //event |= SPI_EVENT_ERROR;
+ }
+ // Transmit FIFO Under-Run
+ if (spi_base->STATUS & SPI_STATUS_TXUFIF_Msk) {
+ spi_base->STATUS = SPI_STATUS_TXUFIF_Msk;
+ event |= SPI_EVENT_ERROR;
+ }
+
+ return event;
+}
+
+/**
+ * Send words from the SPI TX buffer until the send limit is reached or the TX FIFO is full
+ * tx_limit is provided to ensure that the number of SPI frames (words) in flight can be managed.
+ * @param[in] obj The SPI object on which to operate
+ * @param[in] tx_limit The maximum number of words to send
+ * @return The number of SPI words that have been transfered
+ */
+static uint32_t spi_master_write_asynch(spi_t *obj, uint32_t tx_limit)
+{
+ uint32_t n_words = 0;
+ uint32_t tx_rmn = obj->tx_buff.length - obj->tx_buff.pos;
+ uint32_t rx_rmn = obj->rx_buff.length - obj->rx_buff.pos;
+ uint32_t max_tx = NU_MAX(tx_rmn, rx_rmn);
+ max_tx = NU_MIN(max_tx, tx_limit);
+ uint8_t data_width = spi_get_data_width(obj);
+ uint8_t bytes_per_word = (data_width + 7) / 8;
+ uint8_t *tx = (uint8_t *)(obj->tx_buff.buffer) + bytes_per_word * obj->tx_buff.pos;
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ while ((n_words < max_tx) && spi_writeable(obj)) {
+ if (spi_is_tx_complete(obj)) {
+ // Transmit dummy as transmit buffer is empty
+ SPI_WRITE_TX(spi_base, 0);
+ }
+ else {
+ switch (bytes_per_word) {
+ case 4:
+ SPI_WRITE_TX(spi_base, nu_get32_le(tx));
+ tx += 4;
+ break;
+ case 2:
+ SPI_WRITE_TX(spi_base, nu_get16_le(tx));
+ tx += 2;
+ break;
+ case 1:
+ SPI_WRITE_TX(spi_base, *((uint8_t *) tx));
+ tx += 1;
+ break;
+ }
+
+ obj->tx_buff.pos ++;
+ }
+ n_words ++;
+ }
+
+ //Return the number of words that have been sent
+ return n_words;
+}
+
+/**
+ * Read SPI words out of the RX FIFO
+ * Continues reading words out of the RX FIFO until the following condition is met:
+ * o There are no more words in the FIFO
+ * OR BOTH OF:
+ * o At least as many words as the TX buffer have been received
+ * o At least as many words as the RX buffer have been received
+ * This way, RX overflows are not generated when the TX buffer size exceeds the RX buffer size
+ * @param[in] obj The SPI object on which to operate
+ * @return Returns the number of words extracted from the RX FIFO
+ */
+static uint32_t spi_master_read_asynch(spi_t *obj)
+{
+ uint32_t n_words = 0;
+ uint32_t tx_rmn = obj->tx_buff.length - obj->tx_buff.pos;
+ uint32_t rx_rmn = obj->rx_buff.length - obj->rx_buff.pos;
+ uint32_t max_rx = NU_MAX(tx_rmn, rx_rmn);
+ uint8_t data_width = spi_get_data_width(obj);
+ uint8_t bytes_per_word = (data_width + 7) / 8;
+ uint8_t *rx = (uint8_t *)(obj->rx_buff.buffer) + bytes_per_word * obj->rx_buff.pos;
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ while ((n_words < max_rx) && spi_readable(obj)) {
+ if (spi_is_rx_complete(obj)) {
+ // Disregard as receive buffer is full
+ SPI_READ_RX(spi_base);
+ }
+ else {
+ switch (bytes_per_word) {
+ case 4: {
+ uint32_t val = SPI_READ_RX(spi_base);
+ nu_set32_le(rx, val);
+ rx += 4;
+ break;
+ }
+ case 2: {
+ uint16_t val = SPI_READ_RX(spi_base);
+ nu_set16_le(rx, val);
+ rx += 2;
+ break;
+ }
+ case 1:
+ *rx ++ = SPI_READ_RX(spi_base);
+ break;
+ }
+
+ obj->rx_buff.pos ++;
+ }
+ n_words ++;
+ }
+
+ // Return the number of words received
+ return n_words;
+}
+
+static void spi_buffer_set(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length)
+{
+ obj->tx_buff.buffer = (void *) tx;
+ obj->tx_buff.length = tx_length;
+ obj->tx_buff.pos = 0;
+ obj->tx_buff.width = spi_get_data_width(obj);
+ obj->rx_buff.buffer = rx;
+ obj->rx_buff.length = rx_length;
+ obj->rx_buff.pos = 0;
+ obj->rx_buff.width = spi_get_data_width(obj);
+}
+
+static void spi_check_dma_usage(DMAUsage *dma_usage, int *dma_ch_tx, int *dma_ch_rx)
+{
+ if (*dma_usage != DMA_USAGE_NEVER) {
+ if (*dma_ch_tx == DMA_ERROR_OUT_OF_CHANNELS) {
+ *dma_ch_tx = dma_channel_allocate(DMA_CAP_NONE);
+ }
+ if (*dma_ch_rx == DMA_ERROR_OUT_OF_CHANNELS) {
+ *dma_ch_rx = dma_channel_allocate(DMA_CAP_NONE);
+ }
+
+ if (*dma_ch_tx == DMA_ERROR_OUT_OF_CHANNELS || *dma_ch_rx == DMA_ERROR_OUT_OF_CHANNELS) {
+ *dma_usage = DMA_USAGE_NEVER;
+ }
+ }
+
+ if (*dma_usage == DMA_USAGE_NEVER) {
+ dma_channel_free(*dma_ch_tx);
+ *dma_ch_tx = DMA_ERROR_OUT_OF_CHANNELS;
+ dma_channel_free(*dma_ch_rx);
+ *dma_ch_rx = DMA_ERROR_OUT_OF_CHANNELS;
+ }
+}
+
+static uint8_t spi_get_data_width(spi_t *obj)
+{
+ SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi);
+
+ return ((spi_base->CTL & SPI_CTL_DWIDTH_Msk) >> SPI_CTL_DWIDTH_Pos);
+}
+
+static int spi_is_tx_complete(spi_t *obj)
+{
+ // ???: Exclude tx fifo empty check due to no such interrupt on DMA way
+ return (obj->tx_buff.pos == obj->tx_buff.length);
+ //return (obj->tx_buff.pos == obj->tx_buff.length && SPI_GET_TX_FIFO_EMPTY_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi))));
+}
+
+static int spi_is_rx_complete(spi_t *obj)
+{
+ return (obj->rx_buff.pos == obj->rx_buff.length);
+}
+
+static void spi_dma_handler_tx(uint32_t id, uint32_t event_dma)
+{
+ spi_t *obj = (spi_t *) id;
+
+ // FIXME: Pass this error to caller
+ if (event_dma & DMA_EVENT_ABORT) {
+ }
+ // Expect SPI IRQ will catch this transfer done event
+ if (event_dma & DMA_EVENT_TRANSFER_DONE) {
+ obj->tx_buff.pos = obj->tx_buff.length;
+ }
+ // FIXME: Pass this error to caller
+ if (event_dma & DMA_EVENT_TIMEOUT) {
+ }
+
+ const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab);
+ MBED_ASSERT(modinit != NULL);
+ MBED_ASSERT(modinit->modname == obj->spi.spi);
+
+ void (*vec)(void) = (void (*)(void)) NVIC_GetVector(modinit->irq_n);
+ vec();
+}
+
+static void spi_dma_handler_rx(uint32_t id, uint32_t event_dma)
+{
+ spi_t *obj = (spi_t *) id;
+
+ // FIXME: Pass this error to caller
+ if (event_dma & DMA_EVENT_ABORT) {
+ }
+ // Expect SPI IRQ will catch this transfer done event
+ if (event_dma & DMA_EVENT_TRANSFER_DONE) {
+ obj->rx_buff.pos = obj->rx_buff.length;
+ }
+ // FIXME: Pass this error to caller
+ if (event_dma & DMA_EVENT_TIMEOUT) {
+ }
+
+ const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab);
+ MBED_ASSERT(modinit != NULL);
+ MBED_ASSERT(modinit->modname == obj->spi.spi);
+
+ void (*vec)(void) = (void (*)(void)) NVIC_GetVector(modinit->irq_n);
+ vec();
+}
+
+#endif
+
+#endif