Diff: targets/TARGET_STM/TARGET_STM32F2/analogout_device.c

Revision:

168:9672193075cf

Child:

178:d650f5d4c87a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F2/analogout_device.c	Thu Jul 06 15:42:05 2017 +0100
@@ -0,0 +1,94 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "analogout_api.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "stm32f2xx_hal.h"
+#include "PeripheralPins.h"
+
+void analogout_init(dac_t *obj, PinName pin)
+{
+    DAC_ChannelConfTypeDef sConfig;
+
+    // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
+    obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
+    // Get the functions (dac channel) from the pin and assign it to the object
+    uint32_t function = pinmap_function(pin, PinMap_DAC);
+    MBED_ASSERT(function != (uint32_t)NC);
+    // Save the channel for the write and read functions
+    switch (STM_PIN_CHANNEL(function)) {
+        case 1:
+            obj->channel = DAC_CHANNEL_1;
+            break;
+#if defined(DAC_CHANNEL_2)
+        case 2:
+            obj->channel = DAC_CHANNEL_2;
+            break;
+#endif
+        default:
+            error("Unknown DAC channel");
+            break;
+    }
+
+    if (obj->dac == (DACName)NC) {
+        error("DAC pin mapping failed");
+    }
+
+    // Configure GPIO
+    pinmap_pinout(pin, PinMap_DAC);
+
+    __GPIOA_CLK_ENABLE();
+
+    __DAC_CLK_ENABLE();
+
+    obj->handle.Instance = DAC;
+    if (HAL_DAC_Init(&obj->handle) != HAL_OK ) {
+        error("HAL_DAC_Init failed");
+    }
+
+    sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+    sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+
+    if (HAL_DAC_ConfigChannel(&obj->handle, &sConfig, obj->channel) != HAL_OK) {
+        error("HAL_DAC_ConfigChannel failed");
+    }
+
+    analogout_write_u16(obj, 0);
+}
+
+void analogout_free(dac_t *obj)
+{
+}
+
+
+
+#endif // DEVICE_ANALOGOUT