mbed
Fork of mbed-dev by
Diff: targets/TARGET_STM/TARGET_STM32F4/flash_api.c
- Revision:
- 172:89b338f31ef1
- Child:
- 175:b96e65c34a4d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_STM/TARGET_STM32F4/flash_api.c Wed Aug 16 18:27:13 2017 +0100 @@ -0,0 +1,197 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#if DEVICE_FLASH +#include "flash_api.h" +#include "flash_data.h" +#include "platform/mbed_critical.h" + +// This file is automatically generated + + +static uint32_t GetSector(uint32_t Address); +static uint32_t GetSectorSize(uint32_t Sector); + +int32_t flash_init(flash_t *obj) +{ + /* Allow Access to Flash control registers and user Falsh */ + if (HAL_FLASH_Unlock()) { + return -1; + } else { + return 0; + } +} +int32_t flash_free(flash_t *obj) +{ + /* Disable the Flash option control register access (recommended to protect + the option Bytes against possible unwanted operations) */ + if (HAL_FLASH_Lock()) { + return -1; + } else { + return 0; + } +} +int32_t flash_erase_sector(flash_t *obj, uint32_t address) +{ + /*Variable used for Erase procedure*/ + static FLASH_EraseInitTypeDef EraseInitStruct; + uint32_t FirstSector; + uint32_t SectorError = 0; + + if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) { + + return -1; + } + + /* Get the 1st sector to erase */ + FirstSector = GetSector(address); + + /* Fill EraseInit structure*/ + EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS; + EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3; + EraseInitStruct.Sector = FirstSector; + EraseInitStruct.NbSectors = 1; + if(HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK){ + return -1; + } else { + return 0; + } +} + +int32_t flash_program_page(flash_t *obj, uint32_t address, const uint8_t *data, uint32_t size) +{ + + if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) { + return -1; + } + + /* Note: If an erase operation in Flash memory also concerns data in the data or instruction cache, + you have to make sure that these data are rewritten before they are accessed during code + execution. If this cannot be done safely, it is recommended to flush the caches by setting the + DCRST and ICRST bits in the FLASH_CR register. */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + + __HAL_FLASH_DATA_CACHE_RESET(); + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + __HAL_FLASH_DATA_CACHE_ENABLE(); + + while (size > 0) { + if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, address, (uint64_t)*data) != HAL_OK) { + return -1; + } else { + size--; + address++; + data++; + } + } + return 0; +} + +uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address) +{ + + if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) { + return MBED_FLASH_INVALID_SIZE; + } + + return (GetSectorSize(GetSector(address))); +} + +uint32_t flash_get_page_size(const flash_t *obj) +{ + // not applicable for STM32F4 + return (0x4000); // minimum sector size +} +uint32_t flash_get_start_address(const flash_t *obj) +{ + return FLASH_BASE; +} +uint32_t flash_get_size(const flash_t *obj) +{ + return FLASH_SIZE; +} + +/** + * @brief Gets the sector of a given address + * @param None + * @retval The sector of a given address + */ +static uint32_t GetSector(uint32_t address) +{ + uint32_t sector = 0; + uint32_t tmp = address - ADDR_FLASH_SECTOR_0; + /* This function supports 1Mb and 2Mb flash sizes */ +#if defined(ADDR_FLASH_SECTOR_12) + if (address & 0x100000) { // handle 2nd bank + sector = FLASH_SECTOR_12; + tmp = address - ADDR_FLASH_SECTOR_12; + } +#endif + if (address < ADDR_FLASH_SECTOR_4) { // 16k sectorsize + sector += tmp >>14; + } else if (address < ADDR_FLASH_SECTOR_5) { //64k sector size + sector += FLASH_SECTOR_4; + } else { + sector += 4 + (tmp >>17); + } + return sector; +} + +/** + * @brief Gets sector Size + * @param None + * @retval The size of a given sector + */ +static uint32_t GetSectorSize(uint32_t Sector) +{ + uint32_t sectorsize = 0x00; +#if defined(FLASH_SECTOR_12) + if((Sector == FLASH_SECTOR_0) || (Sector == FLASH_SECTOR_1) || (Sector == FLASH_SECTOR_2) ||\ + (Sector == FLASH_SECTOR_3) || (Sector == FLASH_SECTOR_12) || (Sector == FLASH_SECTOR_13) ||\ + (Sector == FLASH_SECTOR_14) || (Sector == FLASH_SECTOR_15)) { + sectorsize = 16 * 1024; + } else if((Sector == FLASH_SECTOR_4) || (Sector == FLASH_SECTOR_16)) { +#else +if((Sector == FLASH_SECTOR_0) || (Sector == FLASH_SECTOR_1) || (Sector == FLASH_SECTOR_2) ||\ + (Sector == FLASH_SECTOR_3)) { + sectorsize = 16 * 1024; + } else if(Sector == FLASH_SECTOR_4) { +#endif + sectorsize = 64 * 1024; + } else { + sectorsize = 128 * 1024; + } + return sectorsize; +} + +#endif