Simple USBHost library for STM32F746NG Discovery board. Only either the Fastspeed or the Highspeed port can be used( not both together)
Dependents: DISCO-F746NG_USB_Host
Fork of KL46Z-USBHost by
USBHost/USBHost.h@24:5396b6a93262, 2016-06-13 (annotated)
- Committer:
- DieterGraef
- Date:
- Mon Jun 13 17:21:07 2016 +0000
- Revision:
- 24:5396b6a93262
- Parent:
- 18:61554f238584
- Child:
- 25:7d6d9fc471bf
USB Host for STM32F746 DISCO Board. At the moment you can only use either the High Speed Port or the Fast Speed Port.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
va009039 | 12:b91fdea8c0a7 | 1 | /* mbed USBHost Library |
va009039 | 12:b91fdea8c0a7 | 2 | * Copyright (c) 2006-2013 ARM Limited |
va009039 | 12:b91fdea8c0a7 | 3 | * |
va009039 | 12:b91fdea8c0a7 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
va009039 | 12:b91fdea8c0a7 | 5 | * you may not use this file except in compliance with the License. |
va009039 | 12:b91fdea8c0a7 | 6 | * You may obtain a copy of the License at |
va009039 | 12:b91fdea8c0a7 | 7 | * |
va009039 | 12:b91fdea8c0a7 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
va009039 | 12:b91fdea8c0a7 | 9 | * |
va009039 | 12:b91fdea8c0a7 | 10 | * Unless required by applicable law or agreed to in writing, software |
va009039 | 12:b91fdea8c0a7 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
va009039 | 12:b91fdea8c0a7 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
va009039 | 12:b91fdea8c0a7 | 13 | * See the License for the specific language governing permissions and |
va009039 | 12:b91fdea8c0a7 | 14 | * limitations under the License. |
va009039 | 12:b91fdea8c0a7 | 15 | */ |
va009039 | 12:b91fdea8c0a7 | 16 | |
va009039 | 12:b91fdea8c0a7 | 17 | #pragma once |
va009039 | 12:b91fdea8c0a7 | 18 | #include "mbed.h" |
va009039 | 12:b91fdea8c0a7 | 19 | #include "USBHALHost.h" |
va009039 | 12:b91fdea8c0a7 | 20 | #include "USBDeviceConnected.h" |
va009039 | 12:b91fdea8c0a7 | 21 | #include "IUSBEnumerator.h" |
va009039 | 12:b91fdea8c0a7 | 22 | #include "USBHostConf.h" |
va009039 | 12:b91fdea8c0a7 | 23 | #include "dbg.h" |
va009039 | 12:b91fdea8c0a7 | 24 | #include "myvector.h" |
va009039 | 12:b91fdea8c0a7 | 25 | |
va009039 | 12:b91fdea8c0a7 | 26 | /** |
va009039 | 12:b91fdea8c0a7 | 27 | * USBHost class |
va009039 | 12:b91fdea8c0a7 | 28 | * This class is a singleton. All drivers have a reference on the static USBHost instance |
va009039 | 12:b91fdea8c0a7 | 29 | */ |
va009039 | 12:b91fdea8c0a7 | 30 | class USBHost : public USBHALHost { |
va009039 | 12:b91fdea8c0a7 | 31 | public: |
va009039 | 12:b91fdea8c0a7 | 32 | /** |
va009039 | 12:b91fdea8c0a7 | 33 | * Static method to create or retrieve the single USBHost instance |
va009039 | 12:b91fdea8c0a7 | 34 | */ |
DieterGraef | 24:5396b6a93262 | 35 | static USBHost* getHostInst(int IF_Number); |
va009039 | 12:b91fdea8c0a7 | 36 | |
va009039 | 12:b91fdea8c0a7 | 37 | /** |
va009039 | 12:b91fdea8c0a7 | 38 | * Control read: setup stage, data stage and status stage |
va009039 | 12:b91fdea8c0a7 | 39 | * |
va009039 | 12:b91fdea8c0a7 | 40 | * @param dev the control read will be done for this device |
va009039 | 12:b91fdea8c0a7 | 41 | * @param requestType request type |
va009039 | 12:b91fdea8c0a7 | 42 | * @param request request |
va009039 | 12:b91fdea8c0a7 | 43 | * @param value value |
va009039 | 12:b91fdea8c0a7 | 44 | * @param index index |
va009039 | 12:b91fdea8c0a7 | 45 | * @param buf pointer on a buffer where will be store the data received |
va009039 | 12:b91fdea8c0a7 | 46 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 47 | * |
va009039 | 12:b91fdea8c0a7 | 48 | * @returns status of the control read |
va009039 | 12:b91fdea8c0a7 | 49 | */ |
va009039 | 12:b91fdea8c0a7 | 50 | USB_TYPE controlRead(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len); |
va009039 | 12:b91fdea8c0a7 | 51 | |
va009039 | 12:b91fdea8c0a7 | 52 | /** |
va009039 | 12:b91fdea8c0a7 | 53 | * Control write: setup stage, data stage and status stage |
va009039 | 12:b91fdea8c0a7 | 54 | * |
va009039 | 12:b91fdea8c0a7 | 55 | * @param dev the control write will be done for this device |
va009039 | 12:b91fdea8c0a7 | 56 | * @param requestType request type |
va009039 | 12:b91fdea8c0a7 | 57 | * @param request request |
va009039 | 12:b91fdea8c0a7 | 58 | * @param value value |
va009039 | 12:b91fdea8c0a7 | 59 | * @param index index |
va009039 | 12:b91fdea8c0a7 | 60 | * @param buf pointer on a buffer which will be written |
va009039 | 12:b91fdea8c0a7 | 61 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 62 | * |
va009039 | 12:b91fdea8c0a7 | 63 | * @returns status of the control write |
va009039 | 12:b91fdea8c0a7 | 64 | */ |
va009039 | 12:b91fdea8c0a7 | 65 | USB_TYPE controlWrite(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len); |
va009039 | 12:b91fdea8c0a7 | 66 | |
va009039 | 12:b91fdea8c0a7 | 67 | /** |
va009039 | 12:b91fdea8c0a7 | 68 | * Bulk read |
va009039 | 12:b91fdea8c0a7 | 69 | * |
va009039 | 12:b91fdea8c0a7 | 70 | * @param dev the bulk transfer will be done for this device |
va009039 | 12:b91fdea8c0a7 | 71 | * @param ep USBEndpoint which will be used to read a packet |
va009039 | 12:b91fdea8c0a7 | 72 | * @param buf pointer on a buffer where will be store the data received |
va009039 | 12:b91fdea8c0a7 | 73 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 74 | * @param blocking if true, the read is blocking (wait for completion) |
va009039 | 12:b91fdea8c0a7 | 75 | * |
va009039 | 12:b91fdea8c0a7 | 76 | * @returns status of the bulk read |
va009039 | 12:b91fdea8c0a7 | 77 | */ |
va009039 | 12:b91fdea8c0a7 | 78 | USB_TYPE bulkRead(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true); |
va009039 | 12:b91fdea8c0a7 | 79 | |
va009039 | 12:b91fdea8c0a7 | 80 | /** |
va009039 | 12:b91fdea8c0a7 | 81 | * Bulk write |
va009039 | 12:b91fdea8c0a7 | 82 | * |
va009039 | 12:b91fdea8c0a7 | 83 | * @param dev the bulk transfer will be done for this device |
va009039 | 12:b91fdea8c0a7 | 84 | * @param ep USBEndpoint which will be used to write a packet |
va009039 | 12:b91fdea8c0a7 | 85 | * @param buf pointer on a buffer which will be written |
va009039 | 12:b91fdea8c0a7 | 86 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 87 | * @param blocking if true, the write is blocking (wait for completion) |
va009039 | 12:b91fdea8c0a7 | 88 | * |
va009039 | 12:b91fdea8c0a7 | 89 | * @returns status of the bulk write |
va009039 | 12:b91fdea8c0a7 | 90 | */ |
va009039 | 12:b91fdea8c0a7 | 91 | USB_TYPE bulkWrite(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true); |
va009039 | 12:b91fdea8c0a7 | 92 | |
va009039 | 12:b91fdea8c0a7 | 93 | /** |
va009039 | 12:b91fdea8c0a7 | 94 | * Interrupt read |
va009039 | 12:b91fdea8c0a7 | 95 | * |
va009039 | 12:b91fdea8c0a7 | 96 | * @param dev the interrupt transfer will be done for this device |
va009039 | 12:b91fdea8c0a7 | 97 | * @param ep USBEndpoint which will be used to write a packet |
va009039 | 12:b91fdea8c0a7 | 98 | * @param buf pointer on a buffer which will be written |
va009039 | 12:b91fdea8c0a7 | 99 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 100 | * @param blocking if true, the read is blocking (wait for completion) |
va009039 | 12:b91fdea8c0a7 | 101 | * |
va009039 | 12:b91fdea8c0a7 | 102 | * @returns status of the interrupt read |
va009039 | 12:b91fdea8c0a7 | 103 | */ |
va009039 | 12:b91fdea8c0a7 | 104 | USB_TYPE interruptRead(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true); |
va009039 | 12:b91fdea8c0a7 | 105 | |
va009039 | 12:b91fdea8c0a7 | 106 | /** |
va009039 | 12:b91fdea8c0a7 | 107 | * Interrupt write |
va009039 | 12:b91fdea8c0a7 | 108 | * |
va009039 | 12:b91fdea8c0a7 | 109 | * @param dev the interrupt transfer will be done for this device |
va009039 | 12:b91fdea8c0a7 | 110 | * @param ep USBEndpoint which will be used to write a packet |
va009039 | 12:b91fdea8c0a7 | 111 | * @param buf pointer on a buffer which will be written |
va009039 | 12:b91fdea8c0a7 | 112 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 113 | * @param blocking if true, the write is blocking (wait for completion) |
va009039 | 12:b91fdea8c0a7 | 114 | * |
va009039 | 12:b91fdea8c0a7 | 115 | * @returns status of the interrupt write |
va009039 | 12:b91fdea8c0a7 | 116 | */ |
va009039 | 12:b91fdea8c0a7 | 117 | USB_TYPE interruptWrite(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking = true); |
va009039 | 12:b91fdea8c0a7 | 118 | |
va009039 | 12:b91fdea8c0a7 | 119 | /** |
va009039 | 12:b91fdea8c0a7 | 120 | * Isochronous read |
va009039 | 12:b91fdea8c0a7 | 121 | * |
va009039 | 12:b91fdea8c0a7 | 122 | * @param dev the isochronous transfer will be done for this device |
va009039 | 12:b91fdea8c0a7 | 123 | * @param ep USBEndpoint which will be used to write a packet |
va009039 | 12:b91fdea8c0a7 | 124 | * @param buf pointer on a buffer which will be written |
va009039 | 12:b91fdea8c0a7 | 125 | * @param len length of the transfer |
va009039 | 12:b91fdea8c0a7 | 126 | * @param blocking if true, the read is blocking (wait for completion) |
va009039 | 12:b91fdea8c0a7 | 127 | * |
va009039 | 12:b91fdea8c0a7 | 128 | * @returns status of the interrupt read |
va009039 | 12:b91fdea8c0a7 | 129 | */ |
va009039 | 12:b91fdea8c0a7 | 130 | USB_TYPE isochronousRead(USBDeviceConnected* dev, USBEndpoint* ep, uint8_t* buf, uint32_t len, bool blocking = true); |
va009039 | 12:b91fdea8c0a7 | 131 | |
va009039 | 12:b91fdea8c0a7 | 132 | /** |
va009039 | 12:b91fdea8c0a7 | 133 | * Enumerate a device. |
va009039 | 12:b91fdea8c0a7 | 134 | * |
va009039 | 12:b91fdea8c0a7 | 135 | * @param dev device which will be enumerated |
va009039 | 12:b91fdea8c0a7 | 136 | * |
va009039 | 12:b91fdea8c0a7 | 137 | * @returns status of the enumeration |
va009039 | 12:b91fdea8c0a7 | 138 | */ |
va009039 | 12:b91fdea8c0a7 | 139 | USB_TYPE enumerate(USBDeviceConnected * dev, IUSBEnumerator* pEnumerator); |
va009039 | 12:b91fdea8c0a7 | 140 | |
va009039 | 12:b91fdea8c0a7 | 141 | /** |
va009039 | 12:b91fdea8c0a7 | 142 | * Get a device |
va009039 | 12:b91fdea8c0a7 | 143 | * |
va009039 | 12:b91fdea8c0a7 | 144 | * @param index index of the device which will be returned |
va009039 | 12:b91fdea8c0a7 | 145 | * |
va009039 | 12:b91fdea8c0a7 | 146 | * @returns pointer on the "index" device |
va009039 | 12:b91fdea8c0a7 | 147 | */ |
va009039 | 12:b91fdea8c0a7 | 148 | USBDeviceConnected * getDevice(uint8_t index) { |
va009039 | 12:b91fdea8c0a7 | 149 | return index < DeviceLists.size() ? DeviceLists[index] : NULL; |
va009039 | 12:b91fdea8c0a7 | 150 | } |
va009039 | 12:b91fdea8c0a7 | 151 | |
va009039 | 12:b91fdea8c0a7 | 152 | /** |
va009039 | 12:b91fdea8c0a7 | 153 | * register a driver into the host associated with a callback function called when the device is disconnected |
va009039 | 12:b91fdea8c0a7 | 154 | * |
va009039 | 12:b91fdea8c0a7 | 155 | * @param dev device |
va009039 | 12:b91fdea8c0a7 | 156 | * @param intf interface number |
va009039 | 12:b91fdea8c0a7 | 157 | * @param tptr pointer to the object to call the member function on |
va009039 | 12:b91fdea8c0a7 | 158 | * @param mptr pointer to the member function to be called |
va009039 | 12:b91fdea8c0a7 | 159 | */ |
va009039 | 12:b91fdea8c0a7 | 160 | template<typename T> |
va009039 | 12:b91fdea8c0a7 | 161 | void registerDriver(USBDeviceConnected * dev, uint8_t intf, T* tptr, void (T::*mptr)(void)) { |
va009039 | 12:b91fdea8c0a7 | 162 | } |
va009039 | 12:b91fdea8c0a7 | 163 | |
va009039 | 12:b91fdea8c0a7 | 164 | // KL46Z-USBHost extensions |
va009039 | 12:b91fdea8c0a7 | 165 | int interruptReadNB(USBEndpoint* ep, uint8_t* data, int size); |
va009039 | 12:b91fdea8c0a7 | 166 | int bulkReadNB(USBEndpoint*ep, uint8_t* data, int size); |
va009039 | 12:b91fdea8c0a7 | 167 | int isochronousReadNB(USBEndpoint*ep, uint8_t* data, int size); |
va009039 |
18:61554f238584 | 168 | |
va009039 |
18:61554f238584 | 169 | /** |
va009039 |
18:61554f238584 | 170 | * non-blocking processing |
va009039 |
18:61554f238584 | 171 | */ |
va009039 | 12:b91fdea8c0a7 | 172 | static void poll(); |
va009039 | 12:b91fdea8c0a7 | 173 | |
va009039 | 12:b91fdea8c0a7 | 174 | private: |
DieterGraef | 24:5396b6a93262 | 175 | USBHost(int InterfaceNumber); |
va009039 | 12:b91fdea8c0a7 | 176 | static USBHost* inst; |
va009039 | 12:b91fdea8c0a7 | 177 | virtual bool addDevice(USBDeviceConnected* parent, int port, bool lowSpeed); |
va009039 | 12:b91fdea8c0a7 | 178 | void root_enumeration(USBDeviceConnected* dev); |
va009039 | 12:b91fdea8c0a7 | 179 | void parseConfDescr(USBDeviceConnected* dev, uint8_t* conf_descr, uint32_t len, IUSBEnumerator* pEnumerator); |
va009039 | 12:b91fdea8c0a7 | 180 | myvector<USBDeviceConnected*>DeviceLists; |
va009039 | 12:b91fdea8c0a7 | 181 | void task(); |
va009039 | 12:b91fdea8c0a7 | 182 | EndpointQueue ep_queue; |
va009039 | 12:b91fdea8c0a7 | 183 | |
va009039 | 12:b91fdea8c0a7 | 184 | // USB HUB |
va009039 | 12:b91fdea8c0a7 | 185 | bool Hub(USBDeviceConnected* dev); |
va009039 | 12:b91fdea8c0a7 | 186 | int SetPortPower(USBDeviceConnected* dev, int port); |
va009039 | 12:b91fdea8c0a7 | 187 | int ClearPortPower(USBDeviceConnected* dev, int port); |
va009039 | 12:b91fdea8c0a7 | 188 | int PortReset(USBDeviceConnected* dev, int port); |
va009039 | 12:b91fdea8c0a7 | 189 | int SetPortFeature(USBDeviceConnected* dev, int feature, int index); |
va009039 | 12:b91fdea8c0a7 | 190 | int ClearPortFeature(USBDeviceConnected* dev, int feature, int index); |
va009039 | 12:b91fdea8c0a7 | 191 | int SetPortReset(USBDeviceConnected* dev, int port); |
va009039 | 12:b91fdea8c0a7 | 192 | int GetPortStatus(USBDeviceConnected* dev, int port, uint32_t* status); |
va009039 | 12:b91fdea8c0a7 | 193 | }; |
va009039 | 12:b91fdea8c0a7 | 194 |