This is an example based on mbed-os cellular APIs that demonstrates a TCP or UDP echo transaction with a public echo server. Included TPB23 NB-IoT module which is can use LGU+ in Korea.
This example is showing how to use the NB-IoT(SECOM TPB23 module) of LGU plus network in Korea. The NB-IoT module' seller provided a document on how to start based on Mbed OS 5.11. (Created by CodeZoo) This guide has been supported to the latest os version which included 5.12 ~ 5.15.
- if you need specific version of Mbed OS, please revision of TPB23_Driver and check it out.
- Pelion ready example code is here!
Requirement
- Need to check CodeZoo's s hardware a guide.
- Need a CodeZoo's NBIoT board and development board.
- Board picture & Jumper configure
- And also can use with mbed application shield, as shown below.

Tested with
- DISCO_L475VG_IOT01A - If you are in Korea, can buy here !
- NUCLEO_F429ZI - If you are in Korea, can buy here !
1. Import the application into your desktop
mbed import http://os.mbed.com/users/Daniel_Lee/code/mbed-os-example-cellular-TPB23/ cd mbed-os-example-cellular-TPB23
2. Compile and program
mbed compile -t <toolchain> -m <TARGET_BOARD>
(supported toolchains : GCC_ARM / ARM / IAR)
3. Download binary to a target board
4. Result
mbed-os-example-cellular Built: Aug 7 2019, 06:10:47 [MAIN], plmn: NULL Establishing connection [00000001ms][INFO][CELL]: New CellularContext (20000a08) [00000002ms][INFO][CELL]: CellularContext plmn NULL [00000003ms][INFO][CELL]: CellularContext connect [00000036ms][INFO][CELL]: RSSI -69 dBm [00000036ms][INFO][CELL]: Start connecting (timeout 1 s) [00000087ms][INFO][CELL]: RSSI -69 dBm [00000116ms][INFO][CELL]: Modem ready [00000146ms][INFO][CELL]: RSSI -69 dBm [00000146ms][INFO][CELL]: Setup SIM (timeout 1 s) [00001233ms][INFO][CELL]: Looked up APN internet [00001362ms][ERR ][CELL]: AT error code 50 [00001362ms][WARN][CELL]: Packet domain event reporting set failed! [00001393ms][INFO][CELL]: RSSI -65 dBm [00001393ms][INFO][CELL]: Network registration (timeout 180 s) [00001443ms][INFO][CELL]: Registering network => Attaching network [00001473ms][INFO][CELL]: RSSI -65 dBm [00001473ms][INFO][CELL]: Attaching network (timeout 60 s) [00001601ms][INFO][CELL]: Found PDP context 1 [00001649ms][INFO][CELL]: Activate PDP context 1 Connection Established. [00001671ms][INFO][CELL]: Socket 0 open [00001707ms][INFO][CELL]: Socket 1 open [00001748ms][INFO][CELL]: Socket create id: 1 [00001883ms][INFO][CELL]: Socket 1 sent 43 bytes to 8.8.8.8 port 53 [00004311ms][INFO][CELL]: Socket 1 recv 59 bytes from 8.8.8.8 port 53 [00004331ms][INFO][CELL]: Close socket: 1 error: 0 [00004331ms][INFO][CELL]: Socket 1 closed [00004373ms][INFO][CELL]: Socket create id: 1 TCP: connected with echo.mbedcloudtesting.com server [00004448ms][INFO][CELL]: Socket 0 sent 4 bytes to 52.215.34.155 port 7 TCP: Sent 4 Bytes to echo.mbedcloudtesting.com [00007560ms][INFO][CELL]: Socket 0 recv 4 bytes [00007580ms][INFO][CELL]: Close socket: 1 error: 0 [00007580ms][INFO][CELL]: Socket 0 closed Received from echo server 4 Bytes [00007581ms][INFO][CELL]: CellularContext disconnect() [00007630ms][INFO][CELL]: cb: CellularContext disconnected Success. Exiting
Revision 45:63eba30af193, committed 2019-08-07
- Comitter:
- Daniel_Lee
- Date:
- Wed Aug 07 06:31:31 2019 +0000
- Parent:
- 38:84d8baae4f0b
- Child:
- 46:387c2d922a4a
- Commit message:
- Update for Mbed OS 5.12.x; This code was tested on Mbed OS 5.12.2, please check code revision!
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23.cpp Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SERCOMM_TPB23_CellularNetwork.h"
+#include "SERCOMM_TPB23_CellularContext.h"
+#include "SERCOMM_TPB23_CellularInformation.h"
+#include "SERCOMM_TPB23.h"
+#include "CellularLog.h"
+
+#define CONNECT_DELIM "\r\n"
+#define CONNECT_BUFFER_SIZE (1280 + 80 + 80) // AT response + sscanf format
+#define CONNECT_TIMEOUT 8000
+
+using namespace events;
+using namespace mbed;
+
+static const intptr_t cellular_properties[AT_CellularBase::PROPERTY_MAX] = {
+ AT_CellularNetwork::RegistrationModeLAC, // C_EREG
+ AT_CellularNetwork::RegistrationModeDisable, // C_GREG
+ AT_CellularNetwork::RegistrationModeDisable, // C_REG
+ 1, // AT_CGSN_WITH_TYPE
+ 1, // AT_CGDATA
+ 0, // AT_CGAUTH
+ 1, // AT_CNMI
+ 1, // AT_CSMP
+ 1, // AT_CMGF
+ 1, // AT_CSDH
+ 1, // PROPERTY_IPV4_STACK
+ 0, // PROPERTY_IPV6_STACK
+ 0, // PROPERTY_IPV4V6_STACK
+ 0, // PROPERTY_NON_IP_PDP_TYPE
+ 1, // PROPERTY_AT_CGEREP
+};
+
+SERCOMM_TPB23::SERCOMM_TPB23(FileHandle *fh) : AT_CellularDevice(fh)
+{
+ AT_CellularBase::set_cellular_properties(cellular_properties);
+}
+
+nsapi_error_t SERCOMM_TPB23::get_sim_state(SimState &state)
+{
+ _at->lock();
+ _at->flush();
+ _at->cmd_start("AT+NCCID?");
+ _at->cmd_stop();
+ _at->resp_start("+NCCID:");
+ if (_at->info_resp()) {
+ state = SimStateReady;
+ } else {
+ tr_warn("SIM not readable.");
+ state = SimStateUnknown; // SIM may not be ready yet
+ }
+ _at->resp_stop();
+ return _at->unlock_return_error();
+}
+
+AT_CellularNetwork *SERCOMM_TPB23::open_network_impl(ATHandler &at)
+{
+ return new SERCOMM_TPB23_CellularNetwork(at);
+}
+
+AT_CellularContext *SERCOMM_TPB23::create_context_impl(ATHandler &at, const char *apn, bool cp_req, bool nonip_req)
+{
+ return new SERCOMM_TPB23_CellularContext(at, this, apn, cp_req, nonip_req);
+}
+
+AT_CellularInformation *SERCOMM_TPB23::open_information_impl(ATHandler &at)
+{
+ return new SERCOMM_TPB23_CellularInformation(at);
+}
+
+nsapi_error_t SERCOMM_TPB23::init()
+{
+ _at->lock();
+ _at->flush();
+ _at->cmd_start("AT");
+ _at->cmd_stop_read_resp();
+
+ _at->cmd_start("AT+CMEE="); // verbose responses
+ _at->write_int(1);
+ _at->cmd_stop_read_resp();
+
+ return _at->unlock_return_error();
+}
+
+#if MBED_CONF_SERCOMM_TPB23_PROVIDE_DEFAULT
+#include "UARTSerial.h"
+CellularDevice *CellularDevice::get_default_instance()
+{
+ static UARTSerial serial(MBED_CONF_SERCOMM_TPB23_TX, MBED_CONF_SERCOMM_TPB23_RX, MBED_CONF_SERCOMM_TPB23_BAUDRATE);
+ static SERCOMM_TPB23 device(&serial);
+ return &device;
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23.h Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SERCOMM_TPB23_H_
+#define SERCOMM_TPB23_H_
+
+#include "AT_CellularDevice.h"
+
+namespace mbed {
+
+class SERCOMM_TPB23 : public AT_CellularDevice {
+public:
+ SERCOMM_TPB23(FileHandle *fh);
+
+public: // AT_CellularDevice
+ virtual nsapi_error_t get_sim_state(SimState &state);
+
+protected: // AT_CellularDevice
+ virtual AT_CellularNetwork *open_network_impl(ATHandler &at);
+ virtual AT_CellularContext *create_context_impl(ATHandler &at, const char *apn, bool cp_req = false, bool nonip_req = false);
+ virtual AT_CellularInformation *open_information_impl(ATHandler &at);
+ virtual nsapi_error_t init();
+
+public: // NetworkInterface
+ void handle_urc(FileHandle *fh);
+};
+} // namespace mbed
+#endif // SERCOMM_TPB23_H_
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularContext.cpp Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2018, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SERCOMM_TPB23_CellularContext.h"
+#include "SERCOMM_TPB23_CellularStack.h"
+#include "CellularLog.h"
+
+namespace mbed {
+
+SERCOMM_TPB23_CellularContext::SERCOMM_TPB23_CellularContext(ATHandler &at, CellularDevice *device, const char *apn, bool cp_req, bool nonip_req) :
+ AT_CellularContext(at, device, apn, cp_req, nonip_req)
+{
+}
+
+SERCOMM_TPB23_CellularContext::~SERCOMM_TPB23_CellularContext()
+{
+}
+
+#if !NSAPI_PPP_AVAILABLE
+NetworkStack *SERCOMM_TPB23_CellularContext::get_stack()
+{
+ if (_pdp_type == NON_IP_PDP_TYPE || _cp_in_use) {
+ tr_error("Requesting stack for NON-IP context! Should request control plane netif: get_cp_netif()");
+ return NULL;
+ }
+
+ if (!_stack) {
+ _stack = new SERCOMM_TPB23_CellularStack(_at, _cid, (nsapi_ip_stack_t)_pdp_type);
+ }
+ return _stack;
+}
+#endif // #if !NSAPI_PPP_AVAILABLE
+
+} /* namespace mbed */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularContext.h Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2018, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef SERCOMM_TPB23_CELLULARCONTEXT_H_
+#define SERCOMM_TPB23_CELLULARCONTEXT_H_
+
+#include "AT_CellularContext.h"
+
+namespace mbed {
+
+class SERCOMM_TPB23_CellularContext: public AT_CellularContext {
+public:
+ SERCOMM_TPB23_CellularContext(ATHandler &at, CellularDevice *device, const char *apn, bool cp_req = false, bool nonip_req = false);
+ virtual ~SERCOMM_TPB23_CellularContext();
+
+protected:
+#if !NSAPI_PPP_AVAILABLE
+ virtual NetworkStack *get_stack();
+#endif // #if !NSAPI_PPP_AVAILABLE
+};
+
+} /* namespace mbed */
+
+#endif // SERCOMM_TPB23_CELLULARCONTEXT_H_
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularInformation.cpp Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SERCOMM_TPB23_CellularInformation.h"
+
+namespace mbed {
+
+SERCOMM_TPB23_CellularInformation::SERCOMM_TPB23_CellularInformation(ATHandler &at) : AT_CellularInformation(at)
+{
+}
+
+SERCOMM_TPB23_CellularInformation::~SERCOMM_TPB23_CellularInformation()
+{
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularInformation::get_iccid(char *buf, size_t buf_size)
+{
+ _at.lock();
+ _at.cmd_start("AT+NCCID?");
+ _at.cmd_stop();
+ _at.resp_start("+NCCID:");
+ _at.read_string(buf, buf_size);
+ _at.resp_stop();
+ return _at.unlock_return_error();
+}
+
+} /* namespace mbed */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularInformation.h Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SERCOMM_TPB23_CELLULARINFORMATION_H_
+#define SERCOMM_TPB23_CELLULARINFORMATION_H_
+
+#include "AT_CellularInformation.h"
+
+namespace mbed {
+
+class SERCOMM_TPB23_CellularInformation : public AT_CellularInformation {
+public:
+ SERCOMM_TPB23_CellularInformation(ATHandler &at);
+ virtual ~SERCOMM_TPB23_CellularInformation();
+
+public:
+ virtual nsapi_error_t get_iccid(char *buf, size_t buf_size);
+};
+
+} /* namespace mbed */
+#endif // SERCOMM_TPB23_CELLULARINFORMATION_H_
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularNetwork.cpp Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SERCOMM_TPB23_CellularNetwork.h"
+
+using namespace mbed;
+
+SERCOMM_TPB23_CellularNetwork::SERCOMM_TPB23_CellularNetwork(ATHandler &atHandler) : AT_CellularNetwork(atHandler)
+{
+ _op_act = RAT_NB1;
+}
+
+SERCOMM_TPB23_CellularNetwork::~SERCOMM_TPB23_CellularNetwork()
+{
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularNetwork::set_access_technology_impl(RadioAccessTechnology opRat)
+{
+ if (opRat != RAT_NB1) {
+ // only rat that is supported by this modem
+ _op_act = RAT_NB1;
+ return NSAPI_ERROR_UNSUPPORTED;
+ }
+
+ return NSAPI_ERROR_OK;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularNetwork.h Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SERCOMM_TPB23_CELLULAR_NETWORK_H_
+#define SERCOMM_TPB23_CELLULAR_NETWORK_H_
+
+#include "AT_CellularNetwork.h"
+
+namespace mbed {
+
+class SERCOMM_TPB23_CellularNetwork : public AT_CellularNetwork {
+public:
+ SERCOMM_TPB23_CellularNetwork(ATHandler &atHandler);
+ virtual ~SERCOMM_TPB23_CellularNetwork();
+
+protected:
+ virtual nsapi_error_t set_access_technology_impl(RadioAccessTechnology opRat);
+
+};
+} // namespace mbed
+#endif // SERCOMM_TPB23_CELLULAR_NETWORK_H_
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularStack.cpp Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,255 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SERCOMM_TPB23_CellularStack.h"
+#include "CellularUtil.h"
+#include "CellularLog.h"
+
+#define PACKET_SIZE_MAX 1500 //TPB23 Range is 12-1500
+
+using namespace mbed;
+using namespace mbed_cellular_util;
+
+SERCOMM_TPB23_CellularStack::SERCOMM_TPB23_CellularStack(ATHandler &atHandler, int cid, nsapi_ip_stack_t stack_type) : AT_CellularStack(atHandler, cid, stack_type)
+{
+ _at.set_urc_handler("+NSONMI:", mbed::Callback<void()>(this, &SERCOMM_TPB23_CellularStack::urc_nsonmi));
+}
+
+SERCOMM_TPB23_CellularStack::~SERCOMM_TPB23_CellularStack()
+{
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularStack::socket_listen(nsapi_socket_t handle, int backlog)
+{
+ return NSAPI_ERROR_UNSUPPORTED;
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularStack::socket_accept(void *server, void **socket, SocketAddress *addr)
+{
+ return NSAPI_ERROR_UNSUPPORTED;
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularStack::socket_connect(nsapi_socket_t handle, const SocketAddress &address)
+{
+ CellularSocket *socket = (CellularSocket *)handle;
+
+ _at.lock();
+ if (!socket->created) {
+ const nsapi_error_t error_create = create_socket_impl(socket);
+ if (error_create != NSAPI_ERROR_OK) {
+ return error_create;
+ }
+ }
+
+ _at.cmd_start("AT+NSOCO=");
+ _at.write_int(socket->id);
+ _at.write_string(address.get_ip_address(), false);
+ _at.write_int(address.get_port());
+ _at.cmd_stop();
+ _at.resp_start();
+ _at.resp_stop();
+ _at.unlock();
+
+ if (_at.get_last_error() == NSAPI_ERROR_OK) {
+ socket->remoteAddress = address;
+ socket->connected = true;
+ return NSAPI_ERROR_OK;
+ }
+
+ return NSAPI_ERROR_NO_CONNECTION;
+}
+
+void SERCOMM_TPB23_CellularStack::urc_nsonmi()
+{
+ int sock_id = _at.read_int();
+
+ for (int i = 0; i < get_max_socket_count(); i++) {
+ CellularSocket *sock = _socket[i];
+ if (sock && sock->id == sock_id) {
+ if (sock->_cb) {
+ sock->_cb(sock->_data);
+ }
+ break;
+ }
+ }
+}
+
+int SERCOMM_TPB23_CellularStack::get_max_socket_count()
+{
+ return TPB23_SOCKET_MAX;
+}
+
+bool SERCOMM_TPB23_CellularStack::is_protocol_supported(nsapi_protocol_t protocol)
+{
+ return (protocol == NSAPI_UDP || protocol == NSAPI_TCP);
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularStack::socket_close_impl(int sock_id)
+{
+ _at.cmd_start("AT+NSOCL=");
+ _at.write_int(sock_id);
+ _at.cmd_stop_read_resp();
+
+ tr_info("Close socket: %d error: %d", sock_id, _at.get_last_error());
+
+ return _at.get_last_error();
+}
+
+nsapi_error_t SERCOMM_TPB23_CellularStack::create_socket_impl(CellularSocket *socket)
+{
+ int sock_id = -1;
+ bool socketOpenWorking = false;
+
+ if (socket->proto == NSAPI_UDP) {
+ _at.cmd_start("AT+NSOCR=DGRAM,17,");
+ } else if (socket->proto == NSAPI_TCP) {
+ _at.cmd_start("AT+NSOCR=STREAM,6,");
+ } else {
+ return NSAPI_ERROR_PARAMETER;
+ }
+ _at.write_int(socket->localAddress.get_port());
+ _at.write_int(1);
+ _at.cmd_stop();
+ _at.resp_start();
+ sock_id = _at.read_int();
+ _at.resp_stop();
+
+ socketOpenWorking = (_at.get_last_error() == NSAPI_ERROR_OK);
+
+ if (!socketOpenWorking) {
+ _at.cmd_start("AT+NSOCL=0");
+ _at.cmd_stop_read_resp();
+
+ if (socket->proto == NSAPI_UDP) {
+ _at.cmd_start("AT+NSOCR=DGRAM,17,");
+ } else if (socket->proto == NSAPI_TCP) {
+ _at.cmd_start("AT+NSOCR=STREAM,6,");
+ }
+ _at.write_int(socket->localAddress.get_port());
+ _at.write_int(1);
+ _at.cmd_stop();
+ _at.resp_start();
+ sock_id = _at.read_int();
+ _at.resp_stop();
+
+ socketOpenWorking = (_at.get_last_error() == NSAPI_ERROR_OK);
+ }
+
+ if (!socketOpenWorking || (sock_id == -1)) {
+ tr_error("Socket create failed!");
+ return NSAPI_ERROR_NO_SOCKET;
+ }
+
+ // Check for duplicate socket id delivered by modem
+ for (int i = 0; i < TPB23_SOCKET_MAX; i++) {
+ CellularSocket *sock = _socket[i];
+ if (sock && sock->created && sock->id == sock_id) {
+ tr_error("Duplicate socket index: %d created:%d, sock_id: %d", i, sock->created, sock_id);
+ return NSAPI_ERROR_NO_SOCKET;
+ }
+ }
+
+ tr_info("Socket create id: %d", sock_id);
+
+ socket->id = sock_id;
+ socket->created = true;
+
+ return NSAPI_ERROR_OK;
+}
+
+nsapi_size_or_error_t SERCOMM_TPB23_CellularStack::socket_sendto_impl(CellularSocket *socket, const SocketAddress &address,
+ const void *data, nsapi_size_t size)
+{
+ int sent_len = 0;
+
+ if (size > PACKET_SIZE_MAX) {
+ return NSAPI_ERROR_PARAMETER;
+ }
+
+ char *hexstr = new char[size * 2 + 1];
+ int hexlen = char_str_to_hex_str((const char *)data, size, hexstr);
+ // NULL terminated for write_string
+ hexstr[hexlen] = 0;
+
+ if (socket->proto == NSAPI_UDP) {
+ _at.cmd_start("AT+NSOST=");
+ _at.write_int(socket->id);
+ _at.write_string(address.get_ip_address(), false);
+ _at.write_int(address.get_port());
+ _at.write_int(size);
+ } else if (socket->proto == NSAPI_TCP) {
+ _at.cmd_start("AT+NSOSD=");
+ _at.write_int(socket->id);
+ _at.write_int(size);
+ } else {
+ delete [] hexstr;
+ return NSAPI_ERROR_PARAMETER;
+ }
+
+ _at.write_string(hexstr, false);
+ _at.cmd_stop();
+ _at.resp_start();
+ // skip socket id
+ _at.skip_param();
+ sent_len = _at.read_int();
+ _at.resp_stop();
+
+ delete [] hexstr;
+
+ if (_at.get_last_error() == NSAPI_ERROR_OK) {
+ return sent_len;
+ }
+
+ return _at.get_last_error();
+}
+
+nsapi_size_or_error_t SERCOMM_TPB23_CellularStack::socket_recvfrom_impl(CellularSocket *socket, SocketAddress *address,
+ void *buffer, nsapi_size_t size)
+{
+ nsapi_size_or_error_t recv_len = 0;
+ int port;
+ char ip_address[NSAPI_IP_SIZE];
+
+ _at.cmd_start("AT+NSORF=");
+ _at.write_int(socket->id);
+ _at.write_int(size <= PACKET_SIZE_MAX ? size : PACKET_SIZE_MAX);
+ _at.cmd_stop();
+ _at.resp_start();
+ // receiving socket id
+ _at.skip_param();
+ _at.read_string(ip_address, sizeof(ip_address));
+ port = _at.read_int();
+ recv_len = _at.read_int();
+ int hexlen = _at.read_hex_string((char *)buffer, size);
+ // remaining length
+ _at.skip_param();
+ _at.resp_stop();
+
+ if (!recv_len || (recv_len == -1) || (_at.get_last_error() != NSAPI_ERROR_OK)) {
+ return NSAPI_ERROR_WOULD_BLOCK;
+ }
+
+ if (address) {
+ address->set_ip_address(ip_address);
+ address->set_port(port);
+ }
+
+ if (recv_len != hexlen) {
+ tr_error("Not received as much data as expected. Should receive: %d bytes, received: %d bytes", recv_len, hexlen);
+ }
+ return recv_len;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/SERCOMM_TPB23_CellularStack.h Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2017, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SERCOMM_TPB23_CELLULARSTACK_H_
+#define SERCOMM_TPB23_CELLULARSTACK_H_
+
+#include "AT_CellularStack.h"
+
+#define TPB23_SOCKET_MAX 7
+
+namespace mbed {
+
+class SERCOMM_TPB23_CellularStack : public AT_CellularStack {
+public:
+ SERCOMM_TPB23_CellularStack(ATHandler &atHandler, int cid, nsapi_ip_stack_t stack_type);
+ virtual ~SERCOMM_TPB23_CellularStack();
+
+protected: // NetworkStack
+
+ virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog);
+
+ virtual nsapi_error_t socket_accept(nsapi_socket_t server,
+ nsapi_socket_t *handle, SocketAddress *address = 0);
+
+ virtual nsapi_error_t socket_connect(nsapi_socket_t handle, const SocketAddress &address);
+
+protected: // AT_CellularStack
+
+ virtual int get_max_socket_count();
+
+ virtual bool is_protocol_supported(nsapi_protocol_t protocol);
+
+ virtual nsapi_error_t socket_close_impl(int sock_id);
+
+ virtual nsapi_error_t create_socket_impl(CellularSocket *socket);
+
+ virtual nsapi_size_or_error_t socket_sendto_impl(CellularSocket *socket, const SocketAddress &address,
+ const void *data, nsapi_size_t size);
+
+ virtual nsapi_size_or_error_t socket_recvfrom_impl(CellularSocket *socket, SocketAddress *address,
+ void *buffer, nsapi_size_t size);
+
+private:
+ // URC handlers
+ void urc_nsonmi();
+};
+} // namespace mbed
+#endif /* SERCOMM_TPB23_CELLULARSTACK_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SERCOMM/TPB23/mbed_lib.json Wed Aug 07 06:31:31 2019 +0000
@@ -0,0 +1,29 @@
+{
+ "name": "SERCOMM_TPB23",
+ "config": {
+ "tx": {
+ "help": "TX pin for serial connection. D1 assumed if Arduino Form Factor, needs to be set/overwritten otherwise.",
+ "value": null
+ },
+ "rx": {
+ "help": "RX pin for serial connection. D0 assumed if Arduino Form Factor, needs to be set/overwritten otherwise.",
+ "value": null
+ },
+ "rts": {
+ "help": "RTS pin for serial connection",
+ "value": null
+ },
+ "cts": {
+ "help": "CTS pin for serial connection",
+ "value": null
+ },
+ "baudrate" : {
+ "help": "Serial connection baud rate",
+ "value": 9600
+ },
+ "provide-default": {
+ "help": "Provide as default CellularDevice [true/false]",
+ "value": false
+ }
+ }
+}
--- a/main.cpp Tue Apr 30 08:01:58 2019 +0100
+++ b/main.cpp Wed Aug 07 06:31:31 2019 +0000
@@ -206,6 +206,9 @@
int main()
{
+ DigitalOut TPB23_RESET(A1);
+ TPB23_RESET = 0; /* 0: Standby 1: Reset */
+
print_function("\n\nmbed-os-example-cellular\n");
print_function("\n\nBuilt: %s, %s\n", __DATE__, __TIME__);
#ifdef MBED_CONF_NSAPI_DEFAULT_CELLULAR_PLMN
--- a/mbed_app.json Tue Apr 30 08:01:58 2019 +0100
+++ b/mbed_app.json Wed Aug 07 06:31:31 2019 +0000
@@ -18,21 +18,24 @@
"target_overrides": {
"*": {
"target.network-default-interface-type": "CELLULAR",
- "mbed-trace.enable": false,
+ "mbed-trace.enable": true,
"lwip.ipv4-enabled": true,
"lwip.ethernet-enabled": false,
- "lwip.ppp-enabled": true,
+ "lwip.ppp-enabled": false,
"lwip.tcp-enabled": true,
"platform.stdio-convert-newlines": true,
"platform.stdio-baud-rate": 115200,
- "platform.default-serial-baud-rate": 115200,
+ "platform.default-serial-baud-rate": 9600,
"platform.stdio-buffered-serial": true,
"cellular.debug-at": false,
"nsapi.default-cellular-plmn": 0,
"nsapi.default-cellular-sim-pin": "\"1234\"",
"nsapi.default-cellular-apn": 0,
"nsapi.default-cellular-username": 0,
- "nsapi.default-cellular-password": 0
+ "nsapi.default-cellular-password": 0,
+ "SERCOMM_TPB23.tx" : "D1",
+ "SERCOMM_TPB23.rx" : "D0",
+ "SERCOMM_TPB23.provide-default" : true
}
}
}
Daniel Lee