This is an example based on mbed-os cellular APIs that demonstrates a TCP or UDP echo transaction with a public echo server. Included TPB23 NB-IoT module which is can use LGU+ in Korea.
This example is showing how to use the NB-IoT(SECOM TPB23 module) of LGU plus network in Korea. The NB-IoT module' seller provided a document on how to start based on Mbed OS 5.11. (Created by CodeZoo) This guide has been supported to the latest os version which included 5.12 ~ 5.15.
- if you need specific version of Mbed OS, please revision of TPB23_Driver and check it out.
- Pelion ready example code is here!
Requirement
- Need to check CodeZoo's s hardware a guide.
- Need a CodeZoo's NBIoT board and development board.
- Board picture & Jumper configure
- And also can use with mbed application shield, as shown below.

Tested with
- DISCO_L475VG_IOT01A - If you are in Korea, can buy here !
- NUCLEO_F429ZI - If you are in Korea, can buy here !
1. Import the application into your desktop
mbed import http://os.mbed.com/users/Daniel_Lee/code/mbed-os-example-cellular-TPB23/ cd mbed-os-example-cellular-TPB23
2. Compile and program
mbed compile -t <toolchain> -m <TARGET_BOARD>
(supported toolchains : GCC_ARM / ARM / IAR)
3. Download binary to a target board
4. Result
mbed-os-example-cellular Built: Aug 7 2019, 06:10:47 [MAIN], plmn: NULL Establishing connection [00000001ms][INFO][CELL]: New CellularContext (20000a08) [00000002ms][INFO][CELL]: CellularContext plmn NULL [00000003ms][INFO][CELL]: CellularContext connect [00000036ms][INFO][CELL]: RSSI -69 dBm [00000036ms][INFO][CELL]: Start connecting (timeout 1 s) [00000087ms][INFO][CELL]: RSSI -69 dBm [00000116ms][INFO][CELL]: Modem ready [00000146ms][INFO][CELL]: RSSI -69 dBm [00000146ms][INFO][CELL]: Setup SIM (timeout 1 s) [00001233ms][INFO][CELL]: Looked up APN internet [00001362ms][ERR ][CELL]: AT error code 50 [00001362ms][WARN][CELL]: Packet domain event reporting set failed! [00001393ms][INFO][CELL]: RSSI -65 dBm [00001393ms][INFO][CELL]: Network registration (timeout 180 s) [00001443ms][INFO][CELL]: Registering network => Attaching network [00001473ms][INFO][CELL]: RSSI -65 dBm [00001473ms][INFO][CELL]: Attaching network (timeout 60 s) [00001601ms][INFO][CELL]: Found PDP context 1 [00001649ms][INFO][CELL]: Activate PDP context 1 Connection Established. [00001671ms][INFO][CELL]: Socket 0 open [00001707ms][INFO][CELL]: Socket 1 open [00001748ms][INFO][CELL]: Socket create id: 1 [00001883ms][INFO][CELL]: Socket 1 sent 43 bytes to 8.8.8.8 port 53 [00004311ms][INFO][CELL]: Socket 1 recv 59 bytes from 8.8.8.8 port 53 [00004331ms][INFO][CELL]: Close socket: 1 error: 0 [00004331ms][INFO][CELL]: Socket 1 closed [00004373ms][INFO][CELL]: Socket create id: 1 TCP: connected with echo.mbedcloudtesting.com server [00004448ms][INFO][CELL]: Socket 0 sent 4 bytes to 52.215.34.155 port 7 TCP: Sent 4 Bytes to echo.mbedcloudtesting.com [00007560ms][INFO][CELL]: Socket 0 recv 4 bytes [00007580ms][INFO][CELL]: Close socket: 1 error: 0 [00007580ms][INFO][CELL]: Socket 0 closed Received from echo server 4 Bytes [00007581ms][INFO][CELL]: CellularContext disconnect() [00007630ms][INFO][CELL]: cb: CellularContext disconnected Success. Exiting
Diff: SERCOMM/TPB23/SERCOMM_TPB23_CellularStack.h
- Revision:
- 47:006469f922f6
- Parent:
- 46:387c2d922a4a
diff -r 387c2d922a4a -r 006469f922f6 SERCOMM/TPB23/SERCOMM_TPB23_CellularStack.h
--- a/SERCOMM/TPB23/SERCOMM_TPB23_CellularStack.h Thu Aug 08 08:36:54 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2017, Arm Limited and affiliates.
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef SERCOMM_TPB23_CELLULARSTACK_H_
-#define SERCOMM_TPB23_CELLULARSTACK_H_
-
-#include "AT_CellularStack.h"
-
-#define TPB23_SOCKET_MAX 7
-
-namespace mbed {
-
-class SERCOMM_TPB23_CellularStack : public AT_CellularStack {
-public:
- SERCOMM_TPB23_CellularStack(ATHandler &atHandler, int cid, nsapi_ip_stack_t stack_type);
- virtual ~SERCOMM_TPB23_CellularStack();
-
-protected: // NetworkStack
-
- virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog);
-
- virtual nsapi_error_t socket_accept(nsapi_socket_t server,
- nsapi_socket_t *handle, SocketAddress *address = 0);
-
- virtual nsapi_error_t socket_connect(nsapi_socket_t handle, const SocketAddress &address);
-
-protected: // AT_CellularStack
-
- virtual int get_max_socket_count();
-
- virtual bool is_protocol_supported(nsapi_protocol_t protocol);
-
- virtual nsapi_error_t socket_close_impl(int sock_id);
-
- virtual nsapi_error_t create_socket_impl(CellularSocket *socket);
-
- virtual nsapi_size_or_error_t socket_sendto_impl(CellularSocket *socket, const SocketAddress &address,
- const void *data, nsapi_size_t size);
-
- virtual nsapi_size_or_error_t socket_recvfrom_impl(CellularSocket *socket, SocketAddress *address,
- void *buffer, nsapi_size_t size);
-
-private:
- // URC handlers
- void urc_nsonmi();
-};
-} // namespace mbed
-#endif /* SERCOMM_TPB23_CELLULARSTACK_H_ */
Daniel Lee