This is an example based on mbed-os cellular APIs that demonstrates a TCP or UDP echo transaction with a public echo server. Included TPB23 NB-IoT module which is can use LGU+ in Korea.
This example is showing how to use the NB-IoT(SECOM TPB23 module) of LGU plus network in Korea. The NB-IoT module' seller provided a document on how to start based on Mbed OS 5.11. (Created by CodeZoo) This guide has been supported to the latest os version which included 5.12 ~ 5.15.
- if you need specific version of Mbed OS, please revision of TPB23_Driver and check it out.
- Pelion ready example code is here!
Requirement
- Need to check CodeZoo's s hardware a guide.
- Need a CodeZoo's NBIoT board and development board.
- Board picture & Jumper configure
- And also can use with mbed application shield, as shown below.
Tested with
- DISCO_L475VG_IOT01A - If you are in Korea, can buy here !
- NUCLEO_F429ZI - If you are in Korea, can buy here !
1. Import the application into your desktop
mbed import http://os.mbed.com/users/Daniel_Lee/code/mbed-os-example-cellular-TPB23/ cd mbed-os-example-cellular-TPB23
2. Compile and program
mbed compile -t <toolchain> -m <TARGET_BOARD>
(supported toolchains : GCC_ARM / ARM / IAR)
3. Download binary to a target board
4. Result
mbed-os-example-cellular Built: Aug 7 2019, 06:10:47 [MAIN], plmn: NULL Establishing connection [00000001ms][INFO][CELL]: New CellularContext (20000a08) [00000002ms][INFO][CELL]: CellularContext plmn NULL [00000003ms][INFO][CELL]: CellularContext connect [00000036ms][INFO][CELL]: RSSI -69 dBm [00000036ms][INFO][CELL]: Start connecting (timeout 1 s) [00000087ms][INFO][CELL]: RSSI -69 dBm [00000116ms][INFO][CELL]: Modem ready [00000146ms][INFO][CELL]: RSSI -69 dBm [00000146ms][INFO][CELL]: Setup SIM (timeout 1 s) [00001233ms][INFO][CELL]: Looked up APN internet [00001362ms][ERR ][CELL]: AT error code 50 [00001362ms][WARN][CELL]: Packet domain event reporting set failed! [00001393ms][INFO][CELL]: RSSI -65 dBm [00001393ms][INFO][CELL]: Network registration (timeout 180 s) [00001443ms][INFO][CELL]: Registering network => Attaching network [00001473ms][INFO][CELL]: RSSI -65 dBm [00001473ms][INFO][CELL]: Attaching network (timeout 60 s) [00001601ms][INFO][CELL]: Found PDP context 1 [00001649ms][INFO][CELL]: Activate PDP context 1 Connection Established. [00001671ms][INFO][CELL]: Socket 0 open [00001707ms][INFO][CELL]: Socket 1 open [00001748ms][INFO][CELL]: Socket create id: 1 [00001883ms][INFO][CELL]: Socket 1 sent 43 bytes to 8.8.8.8 port 53 [00004311ms][INFO][CELL]: Socket 1 recv 59 bytes from 8.8.8.8 port 53 [00004331ms][INFO][CELL]: Close socket: 1 error: 0 [00004331ms][INFO][CELL]: Socket 1 closed [00004373ms][INFO][CELL]: Socket create id: 1 TCP: connected with echo.mbedcloudtesting.com server [00004448ms][INFO][CELL]: Socket 0 sent 4 bytes to 52.215.34.155 port 7 TCP: Sent 4 Bytes to echo.mbedcloudtesting.com [00007560ms][INFO][CELL]: Socket 0 recv 4 bytes [00007580ms][INFO][CELL]: Close socket: 1 error: 0 [00007580ms][INFO][CELL]: Socket 0 closed Received from echo server 4 Bytes [00007581ms][INFO][CELL]: CellularContext disconnect() [00007630ms][INFO][CELL]: cb: CellularContext disconnected Success. Exiting
SERCOMM/TPB23/SERCOMM_TPB23_CellularInformation.cpp
- Committer:
- Daniel_Lee
- Date:
- 2019-08-08
- Revision:
- 46:387c2d922a4a
- Parent:
- 45:63eba30af193
File content as of revision 46:387c2d922a4a:
/* * Copyright (c) 2017, Arm Limited and affiliates. * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "SERCOMM_TPB23_CellularInformation.h" namespace mbed { SERCOMM_TPB23_CellularInformation::SERCOMM_TPB23_CellularInformation(ATHandler &at) : AT_CellularInformation(at) { } SERCOMM_TPB23_CellularInformation::~SERCOMM_TPB23_CellularInformation() { } nsapi_error_t SERCOMM_TPB23_CellularInformation::get_iccid(char *buf, size_t buf_size) { _at.lock(); _at.cmd_start("AT+NCCID?"); _at.cmd_stop(); _at.resp_start("+NCCID:"); _at.read_string(buf, buf_size); _at.resp_stop(); return _at.unlock_return_error(); } } /* namespace mbed */