Daniel Lee / Mbed OS mbed-os-example-cellular-BG96

Test code that Cat.M1 of BG96 for SK Telecom in Korea

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. 1. Import the application into your desktop:
  2. 2. Compile and program:
  3. 3. Download binary to a target board
  4. 4. Result
  5. 5. Patched code

This example provided how to use Cat.M1(BG96 module) of SK telecom network in Korea. You need a WIZnet BG96 board or can connect directly to M2Mnet BG96 module and development board.

  • If you are using Mbed OS 5.11.5 version, please see here!
  • Pelion ready example code is here!

board board

Or

/media/uploads/Daniel_Lee/small_pic.jpg

/media/uploads/Daniel_Lee/screen_shot_2019-11-14_at_1.38.16_pm.png

  • BG96 RESET = D7
  • BG96 PWRKEY = D9
  • BG96 RX = D0(or D2)
  • BG96 TX = D1(or D8)
  • BG96 VCC = VCC(5V)
  • BG96 GND = GND

Tested with

  • NUCLEO_F429ZI
  • DISCO_L475VG_IOT01A
  • K66F
  • K64F

Below boards are Need to connect board's D2 and D8 to BG96's TX and RX on mbed_app.json

  • NUCLEO_L152RE
  • NUCLEO_F401RE 

 "QUECTEL_BG96.tx": "D8",
 "QUECTEL_BG96.rx": "D2",

1. Import the application into your desktop:

 mbed import https://os.mbed.com/users/Daniel_Lee/code/mbed-os-example-cellular-BG96/

 cd mbed-os-example-cellular-BG96

2. Compile and program:

mbed compile -t <toolchain> -m <TARGET_BOARD>

(supported toolchains : GCC_ARM / ARM / IAR)

3. Download binary to a target board

4. Result

mbed-os-example-cellular


Built: Jul 24 2019, 14:55:22


[MAIN], plmn: NULL
Establishing connection
M2Mnet(BG96) Power ON
[00005501ms][INFO][CELL]: New CellularContext  (20004120)
[00005501ms][INFO][CELL]: CellularContext plmn NULL
[00005502ms][INFO][CELL]: CellularContext connect
[00006503ms][INFO][CELL]: Start connecting (timeout 1000 ms)
[00006512ms][INFO][CELL]: RSSI unknown
[00006520ms][INFO][CELL]: Modem ready
[00006524ms][INFO][CELL]: RSSI unknown
[00006524ms][INFO][CELL]: Setup SIM (timeout 1000 ms)
[00006529ms][INFO][CELL]: SIM is ready
[00006558ms][INFO][CELL]: RSSI unknown
[00006566ms][INFO][CELL]: Network registration (timeout 1000 ms)
[00006570ms][INFO][CELL]: Continue after 1 seconds
[00006964ms][ERR ][CELL]: AT overflow
[00007576ms][INFO][CELL]: RSSI unknown
[00007582ms][INFO][CELL]: Registering network => Attaching network
[00007586ms][INFO][CELL]: RSSI unknown
[00007586ms][INFO][CELL]: Attaching network (timeout 1000 ms)
[00007660ms][INFO][CELL]: Found PDP context 7
[00007663ms][INFO][CELL]: Activate PDP context 7
[00009733ms][INFO][CELL]: Found PDP context 7

Connection Established.
[00009742ms][INFO][CELL]: Socket 0 open
[00009752ms][INFO][CELL]: Socket 1 open
[00009786ms][INFO][CELL]: Socket 1 sent 43 bytes to 8.8.8.8 port 53
[00009967ms][INFO][CELL]: Socket 1 recv 71 bytes from 64:ff9b::808:808 port 53
[00009972ms][INFO][CELL]: Socket 1 closed
TCP: connected with echo.mbedcloudtesting.com server
[00010384ms][INFO][CELL]: Socket 0 sent 4 bytes to 2a05:d018:21f:3800:3164:2a5c7
TCP: Sent 4 Bytes to echo.mbedcloudtesting.com
[00011257ms][INFO][CELL]: Socket 0 recv 4 bytes
[00021263ms][INFO][CELL]: Socket 0 closed
Received from echo server 4 Bytes
[00021263ms][INFO][CELL]: CellularContext disconnect()
[00021264ms][INFO][CELL]: cb: CellularContext disconnected


Success. Exiting

5. Patched code

If need more information such as how to test, please look at https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-cellular/.

All wikipages