Revision 9:10082fc85d18, committed 2016-02-28

Comitter:

BlueShadow

Date:

Sun Feb 28 23:17:46 2016 +0000

Parent:

8:720595aa7bfd

Commit message:

Cleaned up ROHM board for Training classes. Removed some extra remarks and unused variables.

Changed in this revision

--- a/main.cpp	Fri Feb 26 02:42:23 2016 +0000
+++ b/main.cpp	Sun Feb 28 23:17:46 2016 +0000
@@ -1,5 +1,5 @@
 /*************************************************************************
- * Originally this was a 
+ * Originally this was a
  * Dragonfly Example program for 2015 AT&T Government Solutions Hackathon
  *
  * This is in process of being convertered to a mDot processor.  mDot has a
@@ -17,11 +17,11 @@
  *     pressure sensor)
  *
  * What this program does:
- *   - reads data from all sensors on MEMs board and moisture sensor on a
- *     periodic basis
+ *   - reads data from all sensors on MEMs board on a periodic basis
  *   - prints all sensor data to debug port on a periodic basis
  *   - optionally sends LoRa sensor data when the timer expires
- *        THis needs to be written yet.
+ *
+ *        This needs to be written yet.
  *   - optionally sends sensor data to AT&T M2X cloud platform (user must
  *     create own M2X account and configure a device)
  *       - you need to set the "m2x_api_key" field and the "m2x_device_id"
@@ -56,10 +56,8 @@
 */
 
 
-
 #include "mbed.h"
 #include "MbedJSONValue.h"
-// #include "HTTPJson.h"
 #include <string>
 
 //  added the following help files for a mDot not required for Dragonfly.
@@ -73,21 +71,6 @@
 // Debug serial port
 static Serial debug(USBTX, USBRX);
 
-// see https://m2x.att.com/developer/documentation/v2/overview for M2X API documentation
-// M2X device ID
-static const std::string m2x_device_id = "";
-
-// M2X primary API key
-static const std::string m2x_api_key = "";
-
-// set to true if you want to post to the cloud
-// you need to have you M2X account set up properly for this to work?
-bool do_cloud_post = false;
-//bool do_cloud_post = true;
-
-std::string url = "http://api-m2x.att.com/v2/devices/" + m2x_device_id + "/update";
-
-
 // variables for sensor data
 float temp_celsius;
 float humidity_percent;
@@ -99,12 +82,10 @@
 
 // misc variables
 static char wall_of_dash[] = "--------------------------------------------------";
-bool radio_ok = false;
 static int thpm_interval_ms = 5000;
 static int motion_interval_ms = 5000;
 static int print_interval_ms = 5000;
 static int sms_interval_ms = 60000;
-static int post_interval_ms = 30000;
 int debug_baud = 115200;
 
 
@@ -121,7 +102,8 @@
 #define COLOR       //BH1745
 #define KX022       //KX022, Accel Only
 #define Pressure    //BM1383
-//#define SMS         //allow SMS messaging
+
+#define SMS         //allow SMS messaging  now sending LORA!!!!
 //#define Web         //allow M2X communication
 
 
@@ -326,10 +308,10 @@
     mDot* dot;
     std::vector<uint8_t> data;
     std::string data_str = "hello! Jeff";
-    
+
     // get a mDot handle
     dot = mDot::getInstance();
-    
+
     // print library version information
     logInfo("version: %s", dot->getId().c_str());
 
@@ -338,12 +320,12 @@
     //*******************************************
     // reset to default config so we know what state we're in
     dot->resetConfig();
-    
+
     dot->setLogLevel(mts::MTSLog::TRACE_LEVEL);  //INFO_LEVEL
 
     // set up the mDot with our network information: frequency sub band, network name, and network password
     // these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
-    
+
     // frequency sub band is only applicable in the 915 (US) frequency band
     // if using a MultiTech Conduit gateway, use the same sub band as your Conduit (1-8) - the mDot will use the 8 channels in that sub band
     // if using a gateway that supports all 64 channels, use sub band 0 - the mDot will use all 64 channels
@@ -351,31 +333,31 @@
     if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
         logError("failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     logInfo("setting network name");
     if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) {
         logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     logInfo("setting network password");
     if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) {
         logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     // a higher spreading factor allows for longer range but lower throughput
     // in the 915 (US) frequency band, spreading factors 7 - 10 are available
     // in the 868 (EU) frequency band, spreading factors 7 - 12 are available
     logInfo("setting TX spreading factor");
-    if ((ret = dot->setTxDataRate(mDot::SF_10)) != mDot::MDOT_OK) {
+    if ((ret = dot->setTxDataRate(mDot::SF_7)) != mDot::MDOT_OK) {
         logError("failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     // request receive confirmation of packets from the gateway
     logInfo("enabling ACKs");
     if ((ret = dot->setAck(1)) != mDot::MDOT_OK) {
         logError("failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     // save this configuration to the mDot's NVM
     logInfo("saving config");
     if (! dot->saveConfig()) {
@@ -411,11 +393,6 @@
     sms_timer.start();
 #endif
 
-#ifdef Web
-    Timer post_timer;
-    post_timer.start();
-#endif
-    
     while (true) {
         if (thpm_timer.read_ms() > thpm_interval_ms) {
 #ifdef AnalogTemp
@@ -478,84 +455,18 @@
         if (sms_timer.read_ms() > sms_interval_ms) {
             sms_timer.reset();
             logInfo("SMS Send Routine");
-printf("  In sms routine \r\n");
-//            if (radio_ok) {
-//                MbedJSONValue sms_json;
-//                string sms_str;
-//
-//                sms_json["temp_C"] = BDE0600_output;
-//                sms_json["UV"] = ML8511_output;
-//                sms_json["Ambient Light"] = RPR0521_ALS[0];
-//                sms_json["Prox"]      = RPR0521_ALS[1];
-//                sms_json["pressure_hPa"] = BM1383[1];
-//                sms_json["mag_mgauss"]["x"] = MEMS_Mag[0];
-//                sms_json["mag_mgauss"]["y"] = MEMS_Mag[1];
-//                sms_json["mag_mgauss"]["z"] = MEMS_Mag[2];
-//                sms_json["acc_mg"]["x"] = MEMS_Accel[0];
-//                sms_json["acc_mg"]["y"] = MEMS_Accel[1];
-//                sms_json["acc_mg"]["z"] = MEMS_Accel[2];
-//                sms_json["Red"]   = BH1745[0];
-//                sms_json["Green"] = BH1745[1];
-//                sms_json["Blue"]  = BH1745[2];
-//
-//                sms_str = "SENSOR DATA:\n";
-//                sms_str += sms_json.serialize();
-//
-//                logDebug("sending SMS to %s:\r\n%s", phone_number.c_str(), sms_str.c_str());
-//                Code ret = radio->sendSMS(phone_number, sms_str);
-//                if (ret != MTS_SUCCESS)
-//                    logError("sending SMS failed");
-//            }
+            printf("  In sms routine \r\n");
+
         }
 #endif
 
-#ifdef Web
-        if (post_timer.read_ms() > post_interval_ms && do_cloud_post) {
-    printf("in web\n\r");
-//            if (radio->connect()) {
-//                logDebug("posting sensor data");
-//
-//                HTTPClient http;
-//                MbedJSONValue http_json_data;
-//                std::string http_json_str;
-//                std::string m2x_header = "X-M2X-KEY: " + m2x_api_key + "\r\n";
-//                int ret;
-//                char http_response_buf[256];
-//                HTTPText http_response(http_response_buf, sizeof(http_response_buf));
-//
-//                // temp_c, temp_f, humidity, pressure, and moisture are all stream IDs for my device in M2X
-//                // modify these to match your streams or give your streams the same name
-//                http_json_data["values"]["temp_c"] = BDE0600_output;
-//                http_json_data["values"]["UV"] = ML8511_output;
-//                http_json_data["values"]["Ambient Light"] = RPR0521_ALS[0];
-//                http_json_data["values"]["Prox"] = RPR0521_ALS[1];
-//                http_json_str = http_json_data.serialize();
-//
-//                // add extra header with M2X API key
-//                http.setHeader(m2x_header.c_str());
-//
-//                HTTPJson http_json((char*)  http_json_str.c_str());
-//                ret = http.post(url.c_str(), http_json, &http_response);
-//                if (ret != HTTP_OK)
-//                    logError("posting data to cloud failed: [%d][%s]", ret, http_response_buf);
-//                else
-//                    logDebug("post result [%d][%s]", http.getHTTPResponseCode(), http_response_buf);
-//
-//                radio->disconnect();
-//            } else {
-//                logError("establishing PPP link failed");
-//            }
-
-            post_timer.reset();
-        }
-#endif
 
         wait_ms(10);
     }
 }
 
 
-
+/************************************************************************************************/
 // Sensor data acquisition functions
 /************************************************************************************************/
 #ifdef AnalogTemp
@@ -596,7 +507,7 @@
 //    printf(" South Detect = %d\r\n", Hall_Return[0]);
 //    printf(" North Detect = %d\r\n", Hall_Return[1]);
 
-    
+
 }
 #endif
 
@@ -712,7 +623,7 @@
 #ifdef KX022
 void ReadKX022 ()
 {
-    
+
     //Read KX022 Portion from the IC
     i2c.write(KX022_addr_w, &KX022_Addr_Accel_ReadData, 1, RepStart);
     i2c.read(KX022_addr_r, &KX022_Content_ReadData[0], 6, NoRepStart);
@@ -758,38 +669,3 @@
 
 }
 #endif
-
-
-/************************************************************************************
-//  reference only to remember what the names and fuctions are without finding them above.
- ************************************************************************************
-    (" Temp = %.2f C\r\n", BDE0600_output);
-    printf(" UV = %.1f mW/cm2\r\n", ML8511_output);
-
-    printf("BH1745 COLOR Sensor Data:\r\n");
-    printf(" Red   = %d ADC Counts\r\n",BH1745[0]);
-    printf(" Green = %d ADC Counts\r\n",BH1745[1]);
-    printf(" Blue  = %d ADC Counts\r\n",BH1745[2]);
-
-    printf(" ALS = %0.2f lx\r\n", RPR0521_ALS[0]);
-    printf(" PROX= %u ADC Counts\r\n", RPR0521_ALS[1]);     //defined as a float but is an unsigned, bad coding on my part.
-
-    printf("KMX62 Accel+Mag Sensor Data:\r\n");
-    printf(" AccX= %0.2f g\r\n", MEMS_Accel[0]);
-    printf(" AccY= %0.2f g\r\n", MEMS_Accel[1]);
-    printf(" AccZ= %0.2f g\r\n", MEMS_Accel[2]);
-
-    printf(" MagX= %0.2f uT\r\n", MEMS_Mag[0]);
-    printf(" MagY= %0.2f uT\r\n", MEMS_Mag[1]);
-    printf(" MagZ= %0.2f uT\r\n", MEMS_Mag[2]);
-
-    printf("KX022 Accelerometer Sensor Data: \r\n");
-    printf(" AccX= %0.2f g\r\n", KX022_Accel[0]);
-    printf(" AccY= %0.2f g\r\n", KX022_Accel[1]);
-    printf(" AccZ= %0.2f g\r\n", KX022_Accel[2]);
-
-    printf("BM1383 Pressure Sensor Data:\r\n");
-    printf(" Temperature= %0.2f C\r\n", BM1383[0]);
-    printf(" Pressure   = %0.2f hPa\r\n", BM1383[1]);
-
- **********************************************************************************/

--- a/mbed-rtos.lib	Fri Feb 26 02:42:23 2016 +0000
+++ b/mbed-rtos.lib	Sun Feb 28 23:17:46 2016 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed-rtos/#07314541bd12
+http://mbed.org/users/mbed_official/code/mbed-rtos/#b4c5542476ba