Diff: USBDevice/TARGET_RENESAS/TARGET_RZ_A1H/usb1/src/userdef/usb1_function_userdef.c

Revision:

46:378357d7e90d

diff -r 0f216c4e75e5 -r 378357d7e90d USBDevice/TARGET_RENESAS/TARGET_RZ_A1H/usb1/src/userdef/usb1_function_userdef.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_RZ_A1H/usb1/src/userdef/usb1_function_userdef.c	Tue Mar 31 16:15:39 2015 +0100
@@ -0,0 +1,762 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name    : usb1_function_userdef.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s)    : RZ/A1H
+* Tool-Chain   :
+* OS           : None
+* H/W Platform :
+* Description  : RZ/A1H R7S72100 USB Sample Program
+* Operation    :
+* Limitations  :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes   <System Includes> , "Project Includes"
+*******************************************************************************/
+#include <stdio.h>
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "devdrv_usb_function_api.h"
+#include "usb1_function_dmacdrv.h"  /* common DMAC driver for USB */
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define DUMMY_ACCESS OSTM0CNT
+
+/* #define CACHE_WRITEBACK */
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+extern int32_t io_cwb(unsigned long start, unsigned long end);
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+static void usb1_function_enable_dmac0(uint32_t src, uint32_t dst, uint32_t count,
+                                       uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc);
+static void usb1_function_enable_dmac1(uint32_t src, uint32_t dst, uint32_t count,
+                                       uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc);
+static void Userdef_USB_usb1_function_delay_10us_2(void);
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_d0fifo_dmaintid
+* Description  : get D0FIFO DMA Interrupt ID
+* Arguments    : none
+* Return Value : D0FIFO DMA Interrupt ID
+*******************************************************************************/
+IRQn_Type Userdef_USB_usb1_function_d0fifo_dmaintid (void)
+{
+#if 0
+    return DMAINT1_IRQn;
+#else
+    return 0xFFFF;
+#endif
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_d1fifo_dmaintid
+* Description  : get D1FIFO DMA Interrupt ID
+* Arguments    : none
+* Return Value : D1FIFO DMA Interrupt ID
+*******************************************************************************/
+IRQn_Type Userdef_USB_usb1_function_d1fifo_dmaintid (void)
+{
+#if 0
+    return DMAINT1_IRQn;
+#else
+    return 0xFFFF;
+#endif
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_attach
+* Description  : Wait for the software of 1ms.
+*              : Alter this function according to the user's system.
+* Arguments    : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_attach (void)
+{
+    printf("\n");
+    printf("channel 1 attach device\n");
+    printf("\n");
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_detach
+* Description  : Wait for the software of 1ms.
+*              : Alter this function according to the user's system.
+* Arguments    : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_detach (void)
+{
+    printf("\n");
+    printf("channel 1 detach device\n");
+    printf("\n");
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_1ms
+* Description  : Wait for the software of 1ms.
+*              : Alter this function according to the user's system.
+* Arguments    : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_1ms (void)
+{
+    volatile int i;
+    volatile unsigned long tmp;
+
+    /*
+     * Wait 1ms (Please change for your MCU).
+     */
+    for (i = 0; i < 1440; ++i)
+    {
+        tmp = DUMMY_ACCESS;
+    }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_xms
+* Description  : Wait for the software in the period of time specified by the
+*              : argument.
+*              : Alter this function according to the user's system.
+* Arguments    : uint32_t msec ; Wait Time (msec)
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_xms (uint32_t msec)
+{
+    volatile unsigned short i;
+
+    for (i = 0; i < msec; ++i)
+    {
+        Userdef_USB_usb1_function_delay_1ms();
+    }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_10us
+* Description  : Waits for software for the period specified by the argument.
+*              : Alter this function according to the user's system.
+* Arguments    : uint32_t usec ; Wait Time(x 10usec)
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_10us (uint32_t usec)
+{
+    volatile int i;
+
+    /* Wait 10us (Please change for your MCU) */
+    for (i = 0; i < usec; ++i)
+    {
+        Userdef_USB_usb1_function_delay_10us_2();
+    }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_10us_2
+* Description  : Waits for software for the period specified by the argument.
+*              : Alter this function according to the user's system.
+* Arguments    : none
+* Return Value : none
+*******************************************************************************/
+static void Userdef_USB_usb1_function_delay_10us_2 (void)
+{
+    volatile int i;
+    volatile unsigned long tmp;
+
+    /* Wait 1us (Please change for your MCU) */
+    for (i = 0; i < 14; ++i)
+    {
+        tmp = DUMMY_ACCESS;
+    }
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_delay_500ns
+* Description  : Wait for software for 500ns.
+*              : Alter this function according to the user's system.
+* Arguments    : none
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_delay_500ns (void)
+{
+    volatile int i;
+    volatile unsigned long tmp;
+
+    /* Wait 500ns (Please change for your MCU) */
+    /* Wait 500ns I clock 266MHz */
+    tmp = DUMMY_ACCESS;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_start_dma
+* Description  : Enables DMA transfer on the information specified by the argument.
+*              : Set DMAC register by this function to enable DMA transfer.
+*              : After executing this function, USB module is set to start DMA
+*              : transfer. DMA transfer should not wait for DMA transfer complete.
+* Arguments    : USB_FUNCTION_DMA_t *dma   : DMA parameter
+*              :  typedef struct{
+*              :      uint32_t fifo;    FIFO for using
+*              :      uint32_t buffer;  Start address of transfer source/destination
+*              :      uint32_t bytes;   Transfer size(Byte)
+*              :      uint32_t dir;     Transfer direction(0:Buffer->FIFO, 1:FIFO->Buffer)
+*              :      uint32_t size;    DMA transfer size
+*              :   } USB_FUNCTION_DMA_t;
+*              : uint16_t dfacc ; 0 : cycle steal mode
+*              :                  1 : 16byte continuous mode
+*              :                  2 : 32byte continuous mode
+* Return Value : none
+*******************************************************************************/
+void Userdef_USB_usb1_function_start_dma (USB_FUNCTION_DMA_t * dma, uint16_t dfacc)
+{
+    uint32_t trncount;
+    uint32_t src;
+    uint32_t dst;
+    uint32_t size;
+    uint32_t dir;
+#ifdef CACHE_WRITEBACK
+    uint32_t ptr;
+#endif
+
+    trncount = dma->bytes;
+    dir      = dma->dir;
+
+    if (dir == USB_FUNCTION_FIFO2BUF)
+    {
+        /* DxFIFO determination */
+        dst = dma->buffer;
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+        if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+        {
+            src = (uint32_t)(&USB201.D0FIFO.UINT32);
+        }
+        else
+        {
+            src = (uint32_t)(&USB201.D1FIFO.UINT32);
+        }
+        size = dma->size;
+
+        if (size == 0)
+        {
+            src += 3;       /* byte access  */
+        }
+        else if (size == 1)
+        {
+            src += 2;       /* short access */
+        }
+        else
+        {
+            /* Do Nothing */
+        }
+#else
+        size = dma->size;
+
+        if (size == 2)
+        {
+            /* 32bit access */
+            if (dfacc == 2)
+            {
+                /* 32byte access */
+                if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+                {
+                    src = (uint32_t)(&USB201.D0FIFOB0);
+                }
+                else
+                {
+                    src = (uint32_t)(&USB201.D1FIFOB0);
+                }
+            }
+            else if (dfacc == 1)
+            {
+                /* 16byte access */
+                if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+                {
+                    src = (uint32_t)(&USB201.D0FIFOB0);
+                }
+                else
+                {
+                    src = (uint32_t)(&USB201.D1FIFOB0);
+                }
+            }
+            else
+            {
+                /* normal access */
+                if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+                {
+                    src = (uint32_t)(&USB201.D0FIFO.UINT32);
+                }
+                else
+                {
+                    src = (uint32_t)(&USB201.D1FIFO.UINT32);
+                }
+            }
+        }
+        else if (size == 1)
+        {
+            /* 16bit access */
+            dfacc = 0;      /* force normal access */
+
+            if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+            {
+                src = (uint32_t)(&USB201.D0FIFO.UINT32);
+            }
+            else
+            {
+                src = (uint32_t)(&USB201.D1FIFO.UINT32);
+            }
+            src += 2;       /* short access */
+        }
+        else
+        {
+            /* 8bit access */
+            dfacc = 0;      /* force normal access */
+
+            if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+            {
+                src = (uint32_t)(&USB201.D0FIFO.UINT32);
+            }
+            else
+            {
+                src = (uint32_t)(&USB201.D1FIFO.UINT32);
+            }
+            src += 3;       /* byte access */
+        }
+#endif
+    }
+    else
+    {
+        /* DxFIFO determination */
+        src = dma->buffer;
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+        if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+        {
+            dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+        }
+        else
+        {
+            dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+        }
+        size = dma->size;
+
+        if (size == 0)
+        {
+            dst += 3;       /* byte access  */
+        }
+        else if (size == 1)
+        {
+            dst += 2;       /* short access */
+        }
+        else
+        {
+            /* Do Nothing */
+        }
+#else
+        size = dma->size;
+
+        if (size == 2)
+        {
+            /* 32bit access */
+            if (dfacc == 2)
+            {
+                /* 32byte access */
+                if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+                {
+                    dst = (uint32_t)(&USB201.D0FIFOB0);
+                }
+                else
+                {
+                    dst = (uint32_t)(&USB201.D1FIFOB0);
+                }
+            }
+            else if (dfacc == 1)
+            {
+                /* 16byte access */
+                if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+                {
+                    dst = (uint32_t)(&USB201.D0FIFOB0);
+                }
+                else
+                {
+                    dst = (uint32_t)(&USB201.D1FIFOB0);
+                }
+            }
+            else
+            {
+                /* normal access */
+                if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+                {
+                    dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+                }
+                else
+                {
+                    dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+                }
+            }
+        }
+        else if (size == 1)
+        {
+            /* 16bit access */
+            dfacc = 0;      /* force normal access */
+            if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+            {
+                dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+            }
+            else
+            {
+                dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+            }
+            dst += 2;       /* short access */
+        }
+        else
+        {
+            /* 8bit access */
+            dfacc = 0;      /* force normal access */
+
+            if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+            {
+                dst = (uint32_t)(&USB201.D0FIFO.UINT32);
+            }
+            else
+            {
+                dst = (uint32_t)(&USB201.D1FIFO.UINT32);
+            }
+            dst += 3;       /* byte access  */
+        }
+#endif
+    }
+
+#ifdef CACHE_WRITEBACK
+    ptr = (uint32_t)dma->buffer;
+
+    if ((ptr & 0x20000000ul) == 0)
+    {
+        io_cwb((uint32_t)ptr, (uint32_t)(ptr) + trncount);
+    }
+#endif
+
+    if (dma->fifo == USB_FUNCTION_D0FIFO_DMA)
+    {
+        usb1_function_enable_dmac0(src, dst, trncount, size, dir, dma->fifo, dfacc);
+    }
+    else
+    {
+        usb1_function_enable_dmac1(src, dst, trncount, size, dir, dma->fifo, dfacc);
+    }
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_dmac0
+* Description  : Enables DMA transfer on the information specified by the argument.
+* Arguments    : uint32_t src   : src address
+*              : uint32_t dst   : dst address
+*              : uint32_t count : transfer byte
+*              : uint32_t size  : transfer size
+*              : uint32_t dir   : direction
+*              : uint32_t fifo  : FIFO(D0FIFO or D1FIFO)
+*              : uint16_t dfacc : 0 : normal access
+*              :                : 1 : 16byte access
+*              :                : 2 : 32byte access
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_enable_dmac0 (uint32_t src, uint32_t dst, uint32_t count,
+                                        uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc)
+{
+    dmac_transinfo_t trans_info;
+    uint32_t         request_factor = 0;
+    int32_t          ret;
+
+    /* ==== Variable setting for DMAC initialization ==== */
+    trans_info.src_addr = (uint32_t)src;                /* Start address of transfer source      */
+    trans_info.dst_addr = (uint32_t)dst;                /* Start address of transfer destination */
+    trans_info.count    = (uint32_t)count;              /* Total byte count to be transferred    */
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+    if (size == 0)
+    {
+        trans_info.src_size = DMAC_TRANS_SIZE_8;        /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_8;        /* Transfer destination transfer size */
+    }
+    else if (size == 1)
+    {
+        trans_info.src_size = DMAC_TRANS_SIZE_16;       /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_16;       /* Transfer destination transfer size */
+    }
+    else if (size == 2)
+    {
+        trans_info.src_size = DMAC_TRANS_SIZE_32;       /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_32;       /* Transfer destination transfer size */
+    }
+    else
+    {
+        printf("size error!!\n");
+    }
+#else
+    if (dfacc == 2)
+    {
+        /* 32byte access */
+        trans_info.src_size = DMAC_TRANS_SIZE_256;      /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_256;      /* Transfer destination transfer size */
+    }
+    else if (dfacc == 1)
+    {
+        /* 16byte access */
+        trans_info.src_size = DMAC_TRANS_SIZE_128;      /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_128;      /* Transfer destination transfer size */
+    }
+    else
+    {
+        /* normal access */
+        if (size == 0)
+        {
+            trans_info.src_size = DMAC_TRANS_SIZE_8;    /* Transfer source transfer size      */
+            trans_info.dst_size = DMAC_TRANS_SIZE_8;    /* Transfer destination transfer size */
+        }
+        else if (size == 1)
+        {
+            trans_info.src_size = DMAC_TRANS_SIZE_16;   /* Transfer source transfer size      */
+            trans_info.dst_size = DMAC_TRANS_SIZE_16;   /* Transfer destination transfer size */
+        }
+        else if (size == 2)
+        {
+            trans_info.src_size = DMAC_TRANS_SIZE_32;   /* Transfer source transfer size      */
+            trans_info.dst_size = DMAC_TRANS_SIZE_32;   /* Transfer destination transfer size */
+        }
+        else
+        {
+            printf("size error!!\n");
+        }
+    }
+#endif
+
+    if (dir == USB_FUNCTION_FIFO2BUF)
+    {
+        request_factor =DMAC_REQ_USB1_DMA0_RX;          /* USB_0 channel 0 receive FIFO full               */
+        trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC;   /* Count direction of transfer source address      */
+        trans_info.daddr_dir = DMAC_TRANS_ADR_INC;      /* Count direction of transfer destination address */
+    }
+    else if (dir == USB_FUNCTION_BUF2FIFO)
+    {
+        request_factor =DMAC_REQ_USB1_DMA0_TX;          /* USB_0 channel 0 receive FIFO empty              */
+        trans_info.saddr_dir = DMAC_TRANS_ADR_INC;      /* Count direction of transfer source address      */
+        trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC;   /* Count direction of transfer destination address */
+    }
+    else
+    {
+        /* Do Nothing */
+    }
+
+    /* ==== DMAC initialization ==== */
+    usb1_function_DMAC3_PeriReqInit((const dmac_transinfo_t *)&trans_info,
+                                    DMAC_MODE_REGISTER,
+                                    DMAC_SAMPLE_SINGLE,
+                                    request_factor,
+                                    0);     /* Don't care DMAC_REQ_REQD is setting in
+                                            usb1_function_DMAC3_PeriReqInit() */
+
+    /* ==== DMAC startup ==== */
+    ret = usb1_function_DMAC3_Open(DMAC_REQ_MODE_PERI);
+    if (ret != 0)
+    {
+        printf("DMAC3 Open error!!\n");
+    }
+
+    return;
+}
+
+/*******************************************************************************
+* Function Name: usb1_function_enable_dmac1
+* Description  : Enables DMA transfer on the information specified by the argument.
+* Arguments    : uint32_t src   : src address
+*              : uint32_t dst   : dst address
+*              : uint32_t count : transfer byte
+*              : uint32_t size  : transfer size
+*              : uint32_t dir   : direction
+*              : uint32_t fifo  : FIFO(D0FIFO or D1FIFO)
+*              : uint16_t dfacc : 0 : normal access
+*              :                : 1 : 16byte access
+*              :                : 2 : 32byte access
+* Return Value : none
+*******************************************************************************/
+static void usb1_function_enable_dmac1 (uint32_t src, uint32_t dst, uint32_t count,
+                                        uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc)
+{
+    dmac_transinfo_t trans_info;
+    uint32_t         request_factor = 0;
+    int32_t          ret;
+
+    /* ==== Variable setting for DMAC initialization ==== */
+    trans_info.src_addr = (uint32_t)src;                /* Start address of transfer source      */
+    trans_info.dst_addr = (uint32_t)dst;                /* Start address of transfer destination */
+    trans_info.count    = (uint32_t)count;              /* Total byte count to be transferred    */
+#ifndef __USB_FUNCTION_DF_ACC_ENABLE__
+    if (size == 0)
+    {
+        trans_info.src_size = DMAC_TRANS_SIZE_8;        /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_8;        /* Transfer destination transfer size */
+    }
+    else if (size == 1)
+    {
+        trans_info.src_size = DMAC_TRANS_SIZE_16;       /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_16;       /* Transfer destination transfer size */
+    }
+    else if (size == 2)
+    {
+        trans_info.src_size = DMAC_TRANS_SIZE_32;       /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_32;       /* Transfer destination transfer size */
+    }
+    else
+    {
+        printf("size error!!\n");
+    }
+#else
+    if (dfacc == 2)
+    {
+        /* 32byte access */
+        trans_info.src_size = DMAC_TRANS_SIZE_256;      /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_256;      /* Transfer destination transfer size */
+    }
+    else if (dfacc == 1)
+    {
+        /* 16byte access */
+        trans_info.src_size = DMAC_TRANS_SIZE_128;      /* Transfer source transfer size      */
+        trans_info.dst_size = DMAC_TRANS_SIZE_128;      /* Transfer destination transfer size */
+    }
+    else
+    {
+        /* normal access */
+        if (size == 0)
+        {
+            trans_info.src_size = DMAC_TRANS_SIZE_8;    /* Transfer source transfer size      */
+            trans_info.dst_size = DMAC_TRANS_SIZE_8;    /* Transfer destination transfer size */
+        }
+        else if (size == 1)
+        {
+            trans_info.src_size = DMAC_TRANS_SIZE_16;   /* Transfer source transfer size      */
+            trans_info.dst_size = DMAC_TRANS_SIZE_16;   /* Transfer destination transfer size */
+        }
+        else if (size == 2)
+        {
+            trans_info.src_size = DMAC_TRANS_SIZE_32;   /* Transfer source transfer size      */
+            trans_info.dst_size = DMAC_TRANS_SIZE_32;   /* Transfer destination transfer size */
+        }
+        else
+        {
+            printf("size error!!\n");
+        }
+    }
+#endif
+
+    if (dir == USB_FUNCTION_FIFO2BUF)
+    {
+        request_factor =DMAC_REQ_USB1_DMA1_RX;          /* USB_0 channel 0 receive FIFO full               */
+        trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC;   /* Count direction of transfer source address      */
+        trans_info.daddr_dir = DMAC_TRANS_ADR_INC;      /* Count direction of transfer destination address */
+    }
+    else if (dir == USB_FUNCTION_BUF2FIFO)
+    {
+        request_factor =DMAC_REQ_USB1_DMA1_TX;          /* USB_0 channel 0 receive FIFO empty              */
+        trans_info.saddr_dir = DMAC_TRANS_ADR_INC;      /* Count direction of transfer source address      */
+        trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC;   /* Count direction of transfer destination address */
+    }
+    else
+    {
+        /* Do Nothing */
+    }
+
+    /* ==== DMAC initialization ==== */
+    usb1_function_DMAC4_PeriReqInit((const dmac_transinfo_t *)&trans_info,
+                                    DMAC_MODE_REGISTER,
+                                    DMAC_SAMPLE_SINGLE,
+                                    request_factor,
+                                    0);     /* Don't care DMAC_REQ_REQD is setting in
+                                            usb1_function_DMAC4_PeriReqInit() */
+
+    /* ==== DMAC startup ==== */
+    ret = usb1_function_DMAC4_Open(DMAC_REQ_MODE_PERI);
+    if (ret != 0)
+    {
+        printf("DMAC4 Open error!!\n");
+    }
+
+    return;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_stop_dma0
+* Description  : Disables DMA transfer.
+*              : This function should be executed to DMAC executed at the time
+*              : of specification of D0_FIF0_DMA in dma->fifo.
+* Arguments    : none
+* Return Value : uint32_t return Transfer Counter register(DMATCRn) value
+*              : regarding to the bus width.
+*******************************************************************************/
+uint32_t Userdef_USB_usb1_function_stop_dma0 (void)
+{
+    uint32_t remain;
+
+    /* ==== DMAC release ==== */
+    usb1_function_DMAC3_Close(&remain);
+
+    return remain;
+}
+
+/*******************************************************************************
+* Function Name: Userdef_USB_usb1_function_stop_dma1
+* Description  : Disables DMA transfer.
+*              : This function should be executed to DMAC executed at the time
+*              : of specification of D1_FIF0_DMA in dma->fifo.
+* Arguments    : none
+* Return Value : uint32_t return Transfer Counter register(DMATCRn) value
+*              : regarding to the bus width.
+*******************************************************************************/
+uint32_t Userdef_USB_usb1_function_stop_dma1 (void)
+{
+    uint32_t remain;
+
+    /* ==== DMAC release ==== */
+    usb1_function_DMAC4_Close(&remain);
+
+    return remain;
+}
+
+/* End of File */