USB device stack - Added support for the logo/windows key to USB keyboard.

Dependents:   randomSearch

Fork of USBDevice by mbed official

Revision:
46:378357d7e90d
Parent:
35:a8484e16c2f3
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_RENESAS/TARGET_RZ_A1H/usb0/inc/usb0_function_api.h	Tue Mar 31 16:15:39 2015 +0100
@@ -0,0 +1,104 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name    : usb0_function_api.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description  : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB0_FUNCTION_API_H
+#define USB0_FUNCTION_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+Includes   <System Includes> , "Project Includes"
+*******************************************************************************/
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Variable Externs
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+void     usb0_api_function_init(uint8_t int_level, uint16_t mode, uint16_t clockmode);
+uint16_t usb0_api_function_IsConfigured(void);
+uint16_t usb0_function_GetDeviceState(void);
+uint16_t usb0_api_function_CtrlReadStart(uint32_t size, uint8_t *data);
+void     usb0_api_function_CtrlWriteStart(uint32_t size, uint8_t *data);
+uint16_t usb0_api_function_start_send_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+uint16_t usb0_api_function_check_pipe_status(uint16_t pipe, uint32_t *size);
+void     usb0_api_function_clear_pipe_status(uint16_t pipe);
+void     usb0_api_function_start_receive_transfer(uint16_t pipe, uint32_t size, uint8_t *data);
+void     usb0_api_function_set_pid_buf(uint16_t pipe);
+void     usb0_api_function_set_pid_nak(uint16_t pipe);
+void     usb0_api_function_set_pid_stall(uint16_t pipe);
+void     usb0_api_function_clear_pid_stall(uint16_t pipe);
+uint16_t usb0_api_function_get_pid(uint16_t pipe);
+int32_t  usb0_api_function_check_stall(uint16_t pipe);
+void     usb0_api_function_set_sqclr(uint16_t pipe);
+void     usb0_api_function_set_sqset(uint16_t pipe);
+void     usb0_api_function_set_csclr(uint16_t pipe);
+void     usb0_api_function_set_curpipe(uint16_t pipe, uint16_t fifosel, uint16_t isel, uint16_t mbw);
+void     usb0_api_function_clear_brdy_sts(uint16_t pipe);
+void     usb0_api_function_clear_bemp_sts(uint16_t pipe);
+void     usb0_api_function_clear_nrdy_sts(uint16_t pipe);
+
+void     usb0_function_ClearFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_SetFeature(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_SetAddress(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_SetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_SetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_SetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_SynchFrame(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_GetStatus(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_GetDescriptor(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_GetConfiguration(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_GetInterface(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_Resrv_0(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_Resrv_123(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_Resrv_4(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+void     usb0_function_Resrv_5(uint16_t type, uint16_t value, uint16_t index, uint16_t length);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* USB0_FUNCTION_API_H */
+
+/* End of File */