MAX3100, an external serial device to add additional serial ports via SPI
Dependents: FLIGHT_CONTROL_AND_COMMUNICATIONS_SYSTEM
Diff: example1.h
- Revision:
- 0:055897ab699b
- Child:
- 1:46c8c60e744a
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/example1.h Sun Jan 16 18:27:44 2011 +0000 @@ -0,0 +1,72 @@ +/* + Copyright (c) 2011 Andy Kirkham + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in + all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + +#ifdef MAX3100_EXAMPLE_COMPILE + +/* + * Connecting up the MAX3100 for this test program. Note, to form a "loopback" + * the MAX3100 TX pin (13) is connected to the RX pin (12). Don't forget thwe Xtal + * and power pins that are not shown here. Although I do PullUp mode on the IRQ pin + * I still needed a real external pull up resistor on the IRQ line. You may need one + * also. + * ____________ + * / \ + * Mbed MOSI p5 |-----------------> 1| Din TX | 13 ------\ + * MISO p6 |-----------------> 2| Dout | | + * SCLK p7 |-----------------> 3| Sclk RX | 12 ------/ + * p8 |-----------------> 4| CS | + * p9 |-----------------> 5| IRQ | MAX3100 + * +5v ------> 6| SHTD | Xtal and PWR not shown. + * \____________/ + */ + +#include "mbed.h" +#include "MAX3100.h" + +Serial pc(USBTX, USBRX); +MAX3100 max(p5, p6, p7, p8, p9); + +int main() { + + // Set the PC USB serial baud rate. + pc.baud(115200); + + max.enableRxIrq(); + max.enableTxIrq(); + + max.printf("\nHello World.\n"); + + // Any byte received on the "USB serial port" is sent to the MAX3100 device. + // Any byte received by the MAX3100 device is sent to the "USB serial port". + while (1) { + if (pc.readable()) { + int c = pc.getc(); + while (!max.writable()); + max.putc(c); + } + if (max.readable()) { + pc.putc( max.getc() ); + } + } +} + +#endif