Diff: arch/int/W7500x_toe.cpp

Revision:

26:d07c80e18b27

Parent:

24:06e3836a627b

Child:

27:1169973d836c

--- a/arch/int/W7500x_toe.cpp	Mon Jun 29 07:27:34 2015 +0000
+++ b/arch/int/W7500x_toe.cpp	Mon Oct 05 05:41:00 2015 +0000
@@ -15,7 +15,8 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 #include "eth_arch.h"
-#if defined(TARGET_WIZwiki_W7500)
+#if defined(TARGET_WIZwiki_W7500) || defined(TARGET_WIZwiki_W7500P)
+
 
 #include "mbed.h"
 #include "mbed_debug.h"
@@ -29,6 +30,9 @@
  *  - input_MDIO(),output_MDIO(),turnaroud_MDIO(),idle_MDIO()
  * called by ethernet_link() and ethernet_set_link()
  */
+ 
+#if defined TARGET_WIZwiki_W7500
+
 #define MDIO    		GPIO_Pin_14
 #define MDC     		GPIO_Pin_15
 #define GPIO_MDC        GPIOB
@@ -41,6 +45,24 @@
 #define CNTL_AUTONEGO   (0x01ul<<11)
 #define CNTL_SPEED      (0x01ul<<12)
 #define MDC_WAIT        (1)
+
+#elif TARGET_WIZwiki_W7500P
+
+#define MDIO    		GPIO_Pin_15
+#define MDC     		GPIO_Pin_14
+#define GPIO_MDC        GPIOB
+#define PHY_ADDR_IP101G 0x01 
+#define PHY_ADDR 		PHY_ADDR_IP101G
+#define SVAL 			0x2 //right shift val = 2 
+#define PHYREG_CONTROL  0x0 //Control Register address (Contorl basic register)
+#define PHYREG_STATUS   0x1 //Status Register address (Status basic register)
+#define CNTL_DUPLEX     (0x01ul<< 7)
+#define CNTL_AUTONEGO   (0x01ul<<11)
+#define CNTL_SPEED      (0x01ul<<12)
+#define MDC_WAIT        (1)
+
+#endif
+
 void mdio_init(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin_MDC, uint16_t GPIO_Pin_MDIO);
 void mdio_write(GPIO_TypeDef* GPIOx, uint32_t PhyRegAddr, uint32_t val);
 uint32_t mdio_read(GPIO_TypeDef* GPIOx, uint32_t PhyRegAddr);
@@ -151,12 +173,18 @@
 	reg_wr<uint8_t>(MR, MR_RST);
 	// set PAD strengh and pull-up for TXD[3:0] and TXE 
 #ifdef __DEF_USED_IC101AG__ //For using IC+101AG
+
+#if defined(TARGET_WIZwiki_W7500)
+
 	*(volatile uint32_t *)(0x41003068) = 0x64; //TXD0 
 	*(volatile uint32_t *)(0x4100306C) = 0x64; //TXD1
 	*(volatile uint32_t *)(0x41003070) = 0x64; //TXD2
 	*(volatile uint32_t *)(0x41003074) = 0x64; //TXD3
 	*(volatile uint32_t *)(0x41003050) = 0x64; //TXE
+#endif
+
 #endif	
+
 	// set ticker counter
 	reg_wr<uint32_t>(TIC100US, (SystemCoreClock/10000));
 	// write MAC address inside the WZTOE MAC address register
@@ -312,7 +340,7 @@
 	t.start();
 	while(1) {
 		int is_link = ethernet_link();
-		//printf("is_link:%d\r\n", is_link);
+		
 		if (is_link) {
 			return true;
 		}