Projet
Dependents: DISCO-F746NG_Scope_copy
Fork of BSP_DISCO_F746NG by
Diff: stm32746g_discovery_sdram.h
- Revision:
- 0:c9112f0c67e3
diff -r 000000000000 -r c9112f0c67e3 stm32746g_discovery_sdram.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/stm32746g_discovery_sdram.h Mon Sep 28 13:34:16 2015 +0000 @@ -0,0 +1,165 @@ +/** + ****************************************************************************** + * @file stm32746g_discovery_sdram.h + * @author MCD Application Team + * @version V1.0.0 + * @date 25-June-2015 + * @brief This file contains the common defines and functions prototypes for + * the stm32746g_discovery_sdram.c driver. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32746G_DISCOVERY_SDRAM_H +#define __STM32746G_DISCOVERY_SDRAM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup STM32746G_DISCOVERY + * @{ + */ + +/** @addtogroup STM32746G_DISCOVERY_SDRAM + * @{ + */ + +/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Types STM32746G_DISCOVERY_SDRAM Exported Types + * @{ + */ + +/** + * @brief SDRAM status structure definition + */ +#define SDRAM_OK ((uint8_t)0x00) +#define SDRAM_ERROR ((uint8_t)0x01) + +/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Constants STM32746G_DISCOVERY_SDRAM Exported Constants + * @{ + */ +#define SDRAM_DEVICE_ADDR ((uint32_t)0xC0000000) +#define SDRAM_DEVICE_SIZE ((uint32_t)0x800000) /* SDRAM device size in MBytes */ + +/* #define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_8 */ +#define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_16 + +#define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_2 +/* #define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_3 */ + +#define REFRESH_COUNT ((uint32_t)0x0603) /* SDRAM refresh counter (100Mhz SD clock) */ + +#define SDRAM_TIMEOUT ((uint32_t)0xFFFF) + +/* DMA definitions for SDRAM DMA transfer */ +#define __DMAx_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMAx_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define SDRAM_DMAx_CHANNEL DMA_CHANNEL_0 +#define SDRAM_DMAx_STREAM DMA2_Stream0 +#define SDRAM_DMAx_IRQn DMA2_Stream0_IRQn +#define SDRAM_DMAx_IRQHandler DMA2_Stream0_IRQHandler +/** + * @} + */ + +/** + * @brief FMC SDRAM Mode definition register defines + */ +#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000) +#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001) +#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002) +#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004) +#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) +#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) +#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020) +#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030) +#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000) +#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) +#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) +/** + * @} + */ + +/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Macro STM32746G_DISCOVERY_SDRAM Exported Macro + * @{ + */ +/** + * @} + */ + +/** @addtogroup STM32746G_DISCOVERY_SDRAM_Exported_Functions + * @{ + */ +uint8_t BSP_SDRAM_Init(void); +uint8_t BSP_SDRAM_DeInit(void); +void BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount); +uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize); +uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd); +void BSP_SDRAM_DMA_IRQHandler(void); + +/* These functions can be modified in case the current settings (e.g. DMA stream) + need to be changed for specific application needs */ +void BSP_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram, void *Params); +void BSP_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram, void *Params); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32746G_DISCOVERY_SDRAM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/