Tomo Yamanaka
mbed library sources. Supersedes mbed-src. GR-PEACH runs on RAM.
Fork of
mbed-dev
by 
mbed official
Revision 67:4bcbbb9fcddf, committed 2016-02-18
- Comitter:
- mbed_official
- Date:
- Thu Feb 18 10:00:10 2016 +0000
- Parent:
- 66:fdb3f9f9a72f
- Child:
- 68:59749b18b9de
- Commit message:
- Synchronized with git revision b78542d10ea58dcbfe0551c8d89daa9bf613a3c6
Full URL: https://github.com/mbedmicro/mbed/commit/b78542d10ea58dcbfe0551c8d89daa9bf613a3c6/
Changed in this revision
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_ARM_MICRO/startup_stm32l151xc.S Thu Feb 18 09:45:10 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,323 +0,0 @@ -; STM32L151RC Ultra Low Power High-density Devices vector table for MDK ARM_MICRO toolchain -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright (c) 2015, STMicroelectronics -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; -; 1. Redistributions of source code must retain the above copyright notice, -; this list of conditions and the following disclaimer. -; 2. Redistributions in binary form must reproduce the above copyright notice, -; this list of conditions and the following disclaimer in the documentation -; and/or other materials provided with the distribution. -; 3. Neither the name of STMicroelectronics nor the names of its contributors -; may be used to endorse or promote products derived from this software -; without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 - EXPORT __initial_sp - -Stack_Mem SPACE Stack_Size -__initial_sp EQU 0x20008000 ; Top of RAM (32 KB) - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 - EXPORT __heap_base - EXPORT __heap_limit - -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit EQU (__initial_sp - Stack_Size) - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp - DCD RTC_WKUP_IRQHandler ; RTC Wakeup - DCD FLASH_IRQHandler ; FLASH - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_IRQHandler ; ADC1 - DCD USB_HP_IRQHandler ; USB High Priority - DCD USB_LP_IRQHandler ; USB Low Priority - DCD DAC_IRQHandler ; DAC - DCD COMP_IRQHandler ; COMP through EXTI Line - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD LCD_IRQHandler ; LCD - DCD TIM9_IRQHandler ; TIM9 - DCD TIM10_IRQHandler ; TIM10 - DCD TIM11_IRQHandler ; TIM11 - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 - DCD AES_IRQHandler ; AES - DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition - -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_STAMP_IRQHandler [WEAK] - EXPORT RTC_WKUP_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_IRQHandler [WEAK] - EXPORT USB_HP_IRQHandler [WEAK] - EXPORT USB_LP_IRQHandler [WEAK] - EXPORT DAC_IRQHandler [WEAK] - EXPORT COMP_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT LCD_IRQHandler [WEAK] - EXPORT TIM9_IRQHandler [WEAK] - EXPORT TIM10_IRQHandler [WEAK] - EXPORT TIM11_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTC_Alarm_IRQHandler [WEAK] - EXPORT USB_FS_WKUP_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_IRQHandler [WEAK] - EXPORT DMA2_Channel5_IRQHandler [WEAK] - EXPORT AES_IRQHandler [WEAK] - EXPORT COMP_ACQ_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_STAMP_IRQHandler -RTC_WKUP_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_IRQHandler -USB_HP_IRQHandler -USB_LP_IRQHandler -DAC_IRQHandler -COMP_IRQHandler -EXTI9_5_IRQHandler -LCD_IRQHandler -TIM9_IRQHandler -TIM10_IRQHandler -TIM11_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTC_Alarm_IRQHandler -USB_FS_WKUP_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_IRQHandler -DMA2_Channel5_IRQHandler -AES_IRQHandler -COMP_ACQ_IRQHandler - - B . - - ENDP - - ALIGN - END
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_ARM_MICRO/stm32l151rc.sct Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,45 +0,0 @@
-; Scatter-Loading Description File
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2015, STMicroelectronics
-; All rights reserved.
-;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
-;
-; 1. Redistributions of source code must retain the above copyright notice,
-; this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-; this list of conditions and the following disclaimer in the documentation
-; and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-; may be used to endorse or promote products derived from this software
-; without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; STM32L151RC: 256KB FLASH + 32KB SRAM
-LR_IROM1 0x08000000 0x40000 { ; load region size_region
-
- ER_IROM1 0x08000000 0x40000 { ; load address = execution address
- *.o (RESET, +First)
- *(InRoot$$Sections)
- .ANY (+RO)
- }
-
- ; 73 vectors = 292 bytes (0x124) to be reserved in RAM
- RW_IRAM1 (0x20000000+0x124) (0x8000-0x124) { ; RW data
- .ANY (+RW +ZI)
- }
-
-}
-
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_ARM_MICRO/sys.cpp Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,56 +0,0 @@
-/* mbed Microcontroller Library - stackheap
- * Setup a fixed single stack/heap memory model,
- * between the top of the RW/ZI region and the stackpointer
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rt_misc.h>
-#include <stdint.h>
-
-extern char Image$$RW_IRAM1$$ZI$$Limit[];
-
-extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
- uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
- uint32_t sp_limit = __current_sp();
-
- zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
-
- struct __initial_stackheap r;
- r.heap_base = zi_limit;
- r.heap_limit = sp_limit;
- return r;
-}
-
-#ifdef __cplusplus
-}
-#endif
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_ARM_STD/startup_stm32l151xc.S Thu Feb 18 09:45:10 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,296 +0,0 @@ -; STM32L151RC Ultra Low Power High-density Devices vector table for MDK ARM_STD toolchain -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright (c) 2015, STMicroelectronics -; All rights reserved. -; -; Redistribution and use in source and binary forms, with or without -; modification, are permitted provided that the following conditions are met: -; -; 1. Redistributions of source code must retain the above copyright notice, -; this list of conditions and the following disclaimer. -; 2. Redistributions in binary form must reproduce the above copyright notice, -; this list of conditions and the following disclaimer in the documentation -; and/or other materials provided with the distribution. -; 3. Neither the name of STMicroelectronics nor the names of its contributors -; may be used to endorse or promote products derived from this software -; without specific prior written permission. -; -; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -__initial_sp EQU 0x2008000 ; Top of RAM (32 KB) - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp - DCD RTC_WKUP_IRQHandler ; RTC Wakeup - DCD FLASH_IRQHandler ; FLASH - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_IRQHandler ; ADC1 - DCD USB_HP_IRQHandler ; USB High Priority - DCD USB_LP_IRQHandler ; USB Low Priority - DCD DAC_IRQHandler ; DAC - DCD COMP_IRQHandler ; COMP through EXTI Line - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD LCD_IRQHandler ; LCD - DCD TIM9_IRQHandler ; TIM9 - DCD TIM10_IRQHandler ; TIM10 - DCD TIM11_IRQHandler ; TIM11 - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 - DCD AES_IRQHandler ; AES - DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition - -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_STAMP_IRQHandler [WEAK] - EXPORT RTC_WKUP_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_IRQHandler [WEAK] - EXPORT USB_HP_IRQHandler [WEAK] - EXPORT USB_LP_IRQHandler [WEAK] - EXPORT DAC_IRQHandler [WEAK] - EXPORT COMP_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT LCD_IRQHandler [WEAK] - EXPORT TIM9_IRQHandler [WEAK] - EXPORT TIM10_IRQHandler [WEAK] - EXPORT TIM11_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTC_Alarm_IRQHandler [WEAK] - EXPORT USB_FS_WKUP_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_IRQHandler [WEAK] - EXPORT DMA2_Channel5_IRQHandler [WEAK] - EXPORT AES_IRQHandler [WEAK] - EXPORT COMP_ACQ_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_STAMP_IRQHandler -RTC_WKUP_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_IRQHandler -USB_HP_IRQHandler -USB_LP_IRQHandler -DAC_IRQHandler -COMP_IRQHandler -EXTI9_5_IRQHandler -LCD_IRQHandler -TIM9_IRQHandler -TIM10_IRQHandler -TIM11_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTC_Alarm_IRQHandler -USB_FS_WKUP_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_IRQHandler -DMA2_Channel5_IRQHandler -AES_IRQHandler -COMP_ACQ_IRQHandler - - B . - - ENDP - - ALIGN - END
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_ARM_STD/stm32l151rc.sct Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,45 +0,0 @@
-; Scatter-Loading Description File
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2015, STMicroelectronics
-; All rights reserved.
-;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
-;
-; 1. Redistributions of source code must retain the above copyright notice,
-; this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-; this list of conditions and the following disclaimer in the documentation
-; and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-; may be used to endorse or promote products derived from this software
-; without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; STM32L151RC: 256KB FLASH + 32KB SRAM
-LR_IROM1 0x08000000 0x40000 { ; load region size_region
-
- ER_IROM1 0x08000000 0x40000 { ; load address = execution address
- *.o (RESET, +First)
- *(InRoot$$Sections)
- .ANY (+RO)
- }
-
- ; 73 vectors = 292 bytes (0x124) to be reserved in RAM
- RW_IRAM1 (0x20000000+0x124) (0x8000-0x124) { ; RW data
- .ANY (+RW +ZI)
- }
-
-}
-
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_ARM_STD/sys.cpp Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,56 +0,0 @@
-/* mbed Microcontroller Library - stackheap
- * Setup a fixed single stack/heap memory model,
- * between the top of the RW/ZI region and the stackpointer
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rt_misc.h>
-#include <stdint.h>
-
-extern char Image$$RW_IRAM1$$ZI$$Limit[];
-
-extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
- uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
- uint32_t sp_limit = __current_sp();
-
- zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
-
- struct __initial_stackheap r;
- r.heap_base = zi_limit;
- r.heap_limit = sp_limit;
- return r;
-}
-
-#ifdef __cplusplus
-}
-#endif
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_GCC_ARM/STM32L151XC.ld Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,157 +0,0 @@
-/* Linker script to configure memory regions. */
-
-MEMORY
-{
- /* 256KB FLASH, 32KB RAM, Reserve up till 0x13C. There are 0x73 vectors = 292
- * bytes (0x124) in RAM. But all GCC scripts seem to require BootRAM @0x138
- */
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256k
- RAM (rwx) : ORIGIN = 0x2000013C, LENGTH = 0x8000-0x13C
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- * _estack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
- _sidata = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- _sdata = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
- _edata = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- _sbss = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- _ebss = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- _estack = __StackTop;
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/TOOLCHAIN_GCC_ARM/startup_stm32l151xc.S Thu Feb 18 09:45:10 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,418 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32l151xc.s - * @author MCD Application Team - * @version V2.0.0 - * @date 5-September-2014 - * @brief STM32L151XC Devices vector table for - * Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_STAMP_IRQHandler - .word RTC_WKUP_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_IRQHandler - .word USB_HP_IRQHandler - .word USB_LP_IRQHandler - .word DAC_IRQHandler - .word COMP_IRQHandler - .word EXTI9_5_IRQHandler - .word 0 - .word TIM9_IRQHandler - .word TIM10_IRQHandler - .word TIM11_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTC_Alarm_IRQHandler - .word USB_FS_WKUP_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word 0 - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word 0 - .word 0 - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_IRQHandler - .word DMA2_Channel5_IRQHandler - .word 0 - .word COMP_ACQ_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32L151XC devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_STAMP_IRQHandler - .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler - - .weak RTC_WKUP_IRQHandler - .thumb_set RTC_WKUP_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_IRQHandler - .thumb_set ADC1_IRQHandler,Default_Handler - - .weak USB_HP_IRQHandler - .thumb_set USB_HP_IRQHandler,Default_Handler - - .weak USB_LP_IRQHandler - .thumb_set USB_LP_IRQHandler,Default_Handler - - .weak DAC_IRQHandler - .thumb_set DAC_IRQHandler,Default_Handler - - .weak COMP_IRQHandler - .thumb_set COMP_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM9_IRQHandler - .thumb_set TIM9_IRQHandler,Default_Handler - - .weak TIM10_IRQHandler - .thumb_set TIM10_IRQHandler,Default_Handler - - .weak TIM11_IRQHandler - .thumb_set TIM11_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTC_Alarm_IRQHandler - .thumb_set RTC_Alarm_IRQHandler,Default_Handler - - .weak USB_FS_WKUP_IRQHandler - .thumb_set USB_FS_WKUP_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_IRQHandler - .thumb_set DMA2_Channel4_IRQHandler,Default_Handler - - .weak DMA2_Channel5_IRQHandler - .thumb_set DMA2_Channel5_IRQHandler,Default_Handler - - .weak COMP_ACQ_IRQHandler - .thumb_set COMP_ACQ_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/cmsis.h Thu Feb 18 09:45:10 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,38 +0,0 @@ -/* mbed Microcontroller Library - * A generic CMSIS include header - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_CMSIS_H -#define MBED_CMSIS_H - -#include "stm32l1xx.h" -#include "cmsis_nvic.h" - -#endif
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/cmsis_nvic.c Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,55 +0,0 @@
-/* mbed Microcontroller Library
- * CMSIS-style functionality to support dynamic vectors
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "cmsis_nvic.h"
-
-#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
-#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
-
-void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
- uint32_t *vectors = (uint32_t *)SCB->VTOR;
- uint32_t i;
-
- // Copy and switch to dynamic vectors if the first time called
- if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
- uint32_t *old_vectors = vectors;
- vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
- for (i=0; i<NVIC_NUM_VECTORS; i++) {
- vectors[i] = old_vectors[i];
- }
- SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
- }
- vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
-}
-
-uint32_t NVIC_GetVector(IRQn_Type IRQn) {
- uint32_t *vectors = (uint32_t*)SCB->VTOR;
- return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
-}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/cmsis_nvic.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,55 +0,0 @@
-/* mbed Microcontroller Library
- * CMSIS-style functionality to support dynamic vectors
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#ifndef MBED_CMSIS_NVIC_H
-#define MBED_CMSIS_NVIC_H
-
-// STM32L151RC
-// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
-// MCU Peripherals: 57 vectors = 228 bytes from 0x40 to 0x123
-// Total: 73 vectors = 292 bytes (0x124) to be reserved in RAM
-#define NVIC_NUM_VECTORS 73
-#define NVIC_USER_IRQ_OFFSET 16
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
-uint32_t NVIC_GetVector(IRQn_Type IRQn);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/hal_tick.c Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,121 +0,0 @@
-/**
- ******************************************************************************
- * @file hal_tick.c
- * @author MCD Application Team
- * @brief Initialization of HAL tick
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-#include "hal_tick.h"
-
-TIM_HandleTypeDef TimMasterHandle;
-uint32_t PreviousVal = 0;
-
-void us_ticker_irq_handler(void);
-
-void timer_irq_handler(void) {
- // Channel 1 for mbed timeout
- if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) {
- us_ticker_irq_handler();
- }
-
- // Channel 2 for HAL tick
- if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) {
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
- uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
- if ((val - PreviousVal) >= HAL_TICK_DELAY) {
- // Increment HAL variable
- HAL_IncTick();
- // Prepare next interrupt
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
- PreviousVal = val;
-#if 0 // For DEBUG only
- HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
-#endif
- }
- }
-}
-
-// Reconfigure the HAL tick using a standard timer instead of systick.
-HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
- // Enable timer clock
- TIM_MST_RCC;
-
- // Reset timer
- TIM_MST_RESET_ON;
- TIM_MST_RESET_OFF;
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- // Configure time base
- TimMasterHandle.Instance = TIM_MST;
- TimMasterHandle.Init.Period = 0xFFFFFFFF;
- TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
- TimMasterHandle.Init.ClockDivision = 0;
- TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_OC_Init(&TimMasterHandle);
-
- NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
- NVIC_EnableIRQ(TIM_MST_IRQ);
-
- // Channel 1 for mbed timeout
- HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
-
- // Channel 2 for HAL tick
- HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
- PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
-#if 0 // For DEBUG only
- __GPIOB_CLK_ENABLE();
- GPIO_InitTypeDef GPIO_InitStruct;
- GPIO_InitStruct.Pin = GPIO_PIN_6;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-#endif
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/hal_tick.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,60 +0,0 @@
-/**
- ******************************************************************************
- * @file hal_tick.h
- * @author MCD Application Team
- * @brief Initialization of HAL tick
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-#ifndef __HAL_TICK_H
-#define __HAL_TICK_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "stm32l1xx.h"
-#include "cmsis_nvic.h"
-
-#define TIM_MST TIM5
-#define TIM_MST_IRQ TIM5_IRQn
-#define TIM_MST_RCC __TIM5_CLK_ENABLE()
-
-#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
-#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
-
-#define HAL_TICK_DELAY (1000) // 1 ms
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif // __HAL_TICK_H
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/stm32l151xc.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,5701 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l151xc.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 5-September-2014
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
- * This file contains all the peripheral register's definitions, bits
- * definitions and memory mapping for STM32L1xx devices.
- *
- * This file contains:
- * - Data structures and the address mapping for all peripherals
- * - Peripheral's registers declarations and bits definition
- * - Macros to access peripherals registers hardware
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32l151xc
- * @{
- */
-
-#ifndef __STM32L151xC_H
-#define __STM32L151xC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
- /** @addtogroup Configuration_section_for_CMSIS
- * @{
- */
-/**
- * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
- */
-#define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */
-#define __MPU_PRESENT 1 /*!< STM32L1xx provides MPU */
-#define __NVIC_PRIO_BITS 4 /*!< STM32L1xx uses 4 Bits for the Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-
-/**
- * @}
- */
-
-/** @addtogroup Peripheral_interrupt_number_definition
- * @{
- */
-
-/**
- * @brief STM32L1xx Interrupt Number Definition, according to the selected device
- * in @ref Library_configuration_section
- */
-
- /*!< Interrupt Number Definition */
-typedef enum
-{
-/****** Cortex-M3 Processor Exceptions Numbers ******************************************************/
- NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
- MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
- BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
- UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
- SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
- DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
- PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
- SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
-
-/****** STM32L specific Interrupt Numbers ***********************************************************/
- WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
- PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
- TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
- RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */
- FLASH_IRQn = 4, /*!< FLASH global Interrupt */
- RCC_IRQn = 5, /*!< RCC global Interrupt */
- EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
- EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
- EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
- EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
- EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
- DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */
- DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */
- DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */
- DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */
- DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */
- DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */
- DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */
- ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
- USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */
- USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */
- DAC_IRQn = 21, /*!< DAC Interrupt */
- COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */
- EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
- TIM9_IRQn = 25, /*!< TIM9 global Interrupt */
- TIM10_IRQn = 26, /*!< TIM10 global Interrupt */
- TIM11_IRQn = 27, /*!< TIM11 global Interrupt */
- TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
- TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
- TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
- I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
- I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
- I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
- I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
- SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
- SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
- USART1_IRQn = 37, /*!< USART1 global Interrupt */
- USART2_IRQn = 38, /*!< USART2 global Interrupt */
- USART3_IRQn = 39, /*!< USART3 global Interrupt */
- EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
- RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
- USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */
- TIM6_IRQn = 43, /*!< TIM6 global Interrupt */
- TIM7_IRQn = 44, /*!< TIM7 global Interrupt */
- TIM5_IRQn = 46, /*!< TIM5 global Interrupt */
- SPI3_IRQn = 47, /*!< SPI3 global Interrupt */
- DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */
- DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */
- DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */
- DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */
- DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */
- COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */
-} IRQn_Type;
-
-/**
- * @}
- */
-
-#include "core_cm3.h"
-#include "system_stm32l1xx.h"
-#include <stdint.h>
-
-/** @addtogroup Peripheral_registers_structures
- * @{
- */
-
-/**
- * @brief Analog to Digital Converter
- */
-
-typedef struct
-{
- __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
- __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
- __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
- __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
- __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
- __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */
- __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */
- __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */
- __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */
- __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */
- __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */
- __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */
- __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
- __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
- __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
- __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
- __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */
- __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */
- __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */
- __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */
- __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */
- __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */
- __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */
- uint32_t RESERVED; /*!< Reserved, Address offset: 0x5C */
-} ADC_TypeDef;
-
-typedef struct
-{
- __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */
- __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
-} ADC_Common_TypeDef;
-
-/**
- * @brief Comparator
- */
-
-typedef struct
-{
- __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */
-} COMP_TypeDef;
-
-/**
- * @brief CRC calculation unit
- */
-
-typedef struct
-{
- __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
- __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
- __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
-} CRC_TypeDef;
-
-/**
- * @brief Digital to Analog Converter
- */
-
-typedef struct
-{
- __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
- __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
- __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
- __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
- __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
- __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
- __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
- __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
- __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
- __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
- __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
- __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
- __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
- __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
-} DAC_TypeDef;
-
-/**
- * @brief Debug MCU
- */
-
-typedef struct
-{
- __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
- __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
- __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
- __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
-}DBGMCU_TypeDef;
-
-/**
- * @brief DMA Controller
- */
-
-typedef struct
-{
- __IO uint32_t CCR; /*!< DMA channel x configuration register */
- __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
- __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
- __IO uint32_t CMAR; /*!< DMA channel x memory address register */
-} DMA_Channel_TypeDef;
-
-typedef struct
-{
- __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
- __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
-} DMA_TypeDef;
-
-/**
- * @brief External Interrupt/Event Controller
- */
-
-typedef struct
-{
- __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
- __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
- __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
- __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
- __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
- __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
-} EXTI_TypeDef;
-
-/**
- * @brief FLASH Registers
- */
-typedef struct
-{
- __IO uint32_t ACR; /*!< Access control register, Address offset: 0x00 */
- __IO uint32_t PECR; /*!< Program/erase control register, Address offset: 0x04 */
- __IO uint32_t PDKEYR; /*!< Power down key register, Address offset: 0x08 */
- __IO uint32_t PEKEYR; /*!< Program/erase key register, Address offset: 0x0c */
- __IO uint32_t PRGKEYR; /*!< Program memory key register, Address offset: 0x10 */
- __IO uint32_t OPTKEYR; /*!< Option byte key register, Address offset: 0x14 */
- __IO uint32_t SR; /*!< Status register, Address offset: 0x18 */
- __IO uint32_t OBR; /*!< Option byte register, Address offset: 0x1c */
- __IO uint32_t WRPR1; /*!< Write protection register 1, Address offset: 0x20 */
- uint32_t RESERVED[23]; /*!< Reserved, Address offset: 0x24 */
- __IO uint32_t WRPR2; /*!< Write protection register 2, Address offset: 0x80 */
-} FLASH_TypeDef;
-
-/**
- * @brief Option Bytes Registers
- */
-typedef struct
-{
- __IO uint32_t RDP; /*!< Read protection register, Address offset: 0x00 */
- __IO uint32_t USER; /*!< user register, Address offset: 0x04 */
- __IO uint32_t WRP01; /*!< write protection register 0 1, Address offset: 0x08 */
- __IO uint32_t WRP23; /*!< write protection register 2 3, Address offset: 0x0C */
- __IO uint32_t WRP45; /*!< write protection register 4 5, Address offset: 0x10 */
- __IO uint32_t WRP67; /*!< write protection register 6 7, Address offset: 0x14 */
-} OB_TypeDef;
-
-/**
- * @brief Operational Amplifier (OPAMP)
- */
-typedef struct
-{
- __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */
- __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */
- __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */
-} OPAMP_TypeDef;
-
-/**
- * @brief General Purpose IO
- */
-
-typedef struct
-{
- __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
- __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
- __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
- __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
- __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
- __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
- __IO uint32_t BSRR; /*!< GPIO port bit set/reset registerBSRR, Address offset: 0x18 */
- __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
- __IO uint32_t AFR[2]; /*!< GPIO alternate function register, Address offset: 0x20-0x24 */
- __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
-} GPIO_TypeDef;
-
-/**
- * @brief SysTem Configuration
- */
-
-typedef struct
-{
- __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
- __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
- __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
-} SYSCFG_TypeDef;
-
-/**
- * @brief Inter-integrated Circuit Interface
- */
-
-typedef struct
-{
- __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
- __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
- __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
- __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
- __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
- __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
- __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
- __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
- __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
-} I2C_TypeDef;
-
-/**
- * @brief Independent WATCHDOG
- */
-
-typedef struct
-{
- __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */
- __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */
- __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */
- __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */
-} IWDG_TypeDef;
-
-/**
- * @brief Power Control
- */
-
-typedef struct
-{
- __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
- __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
-} PWR_TypeDef;
-
-/**
- * @brief Reset and Clock Control
- */
-
-typedef struct
-{
- __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
- __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */
- __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x08 */
- __IO uint32_t CIR; /*!< RCC Clock interrupt register, Address offset: 0x0C */
- __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x10 */
- __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x14 */
- __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x18 */
- __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x1C */
- __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x20 */
- __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x24 */
- __IO uint32_t AHBLPENR; /*!< RCC AHB peripheral clock enable in low power mode register, Address offset: 0x28 */
- __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x2C */
- __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x30 */
- __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x34 */
-} RCC_TypeDef;
-
-/**
- * @brief Routing Interface
- */
-
-typedef struct
-{
- __IO uint32_t ICR; /*!< RI input capture register, Address offset: 0x00 */
- __IO uint32_t ASCR1; /*!< RI analog switches control register, Address offset: 0x04 */
- __IO uint32_t ASCR2; /*!< RI analog switch control register 2, Address offset: 0x08 */
- __IO uint32_t HYSCR1; /*!< RI hysteresis control register, Address offset: 0x0C */
- __IO uint32_t HYSCR2; /*!< RI Hysteresis control register, Address offset: 0x10 */
- __IO uint32_t HYSCR3; /*!< RI Hysteresis control register, Address offset: 0x14 */
- uint32_t RESERVED1; /*!< Reserved, 0x18 */
- __IO uint32_t ASMR1; /*!< RI Analog switch mode register 1, Address offset: 0x1C */
- __IO uint32_t CMR1; /*!< RI Channel mask register 1, Address offset: 0x20 */
- __IO uint32_t CICR1; /*!< RI Channel Iden for capture register 1, Address offset: 0x24 */
- __IO uint32_t ASMR2; /*!< RI Analog switch mode register 2, Address offset: 0x28 */
- __IO uint32_t CMR2; /*!< RI Channel mask register 2, Address offset: 0x2C */
- __IO uint32_t CICR2; /*!< RI Channel Iden for capture register 2, Address offset: 0x30 */
- __IO uint32_t ASMR3; /*!< RI Analog switch mode register 3, Address offset: 0x34 */
- __IO uint32_t CMR3; /*!< RI Channel mask register 3, Address offset: 0x38 */
- __IO uint32_t CICR3; /*!< RI Channel Iden for capture register 3, Address offset: 0x3C */
-} RI_TypeDef;
-
-/**
- * @brief Real-Time Clock
- */
-typedef struct
-{
- __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
- __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
- __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
- __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
- __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
- __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
- __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
- __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
- __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
- __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
- __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
- __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
- __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
- __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
- __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
- __IO uint32_t CALR; /*!< RRTC calibration register, Address offset: 0x3C */
- __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
- __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
- __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
- uint32_t RESERVED7; /*!< Reserved, 0x4C */
- __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
- __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
- __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
- __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
- __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
- __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
- __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
- __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
- __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
- __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
- __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
- __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
- __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
- __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
- __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
- __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
- __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
- __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
- __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
- __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
- __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */
- __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */
- __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */
- __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */
- __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */
- __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */
- __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */
- __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */
- __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */
- __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */
- __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */
- __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */
-} RTC_TypeDef;
-
-/**
- * @brief Serial Peripheral Interface
- */
-
-typedef struct
-{
- __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
- __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
- __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
- __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
- __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
- __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
- __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
- __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
- __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
-} SPI_TypeDef;
-
-/**
- * @brief TIM
- */
-typedef struct
-{
- __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
- __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
- __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
- __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
- __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
- __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
- __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
- __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
- __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
- __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
- __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
- __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
- uint32_t RESERVED12; /*!< Reserved, 0x30 */
- __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
- __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
- __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
- __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
- uint32_t RESERVED17; /*!< Reserved, 0x44 */
- __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
- __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
- __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
-} TIM_TypeDef;
-/**
- * @brief Universal Synchronous Asynchronous Receiver Transmitter
- */
-
-typedef struct
-{
- __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
- __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
- __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
- __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
- __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
- __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
- __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
-} USART_TypeDef;
-
-/**
- * @brief Universal Serial Bus Full Speed Device
- */
-
-typedef struct
-{
- __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
- __IO uint16_t RESERVED0; /*!< Reserved */
- __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
- __IO uint16_t RESERVED1; /*!< Reserved */
- __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
- __IO uint16_t RESERVED2; /*!< Reserved */
- __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
- __IO uint16_t RESERVED3; /*!< Reserved */
- __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
- __IO uint16_t RESERVED4; /*!< Reserved */
- __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
- __IO uint16_t RESERVED5; /*!< Reserved */
- __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
- __IO uint16_t RESERVED6; /*!< Reserved */
- __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
- __IO uint16_t RESERVED7[17]; /*!< Reserved */
- __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
- __IO uint16_t RESERVED8; /*!< Reserved */
- __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
- __IO uint16_t RESERVED9; /*!< Reserved */
- __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
- __IO uint16_t RESERVEDA; /*!< Reserved */
- __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
- __IO uint16_t RESERVEDB; /*!< Reserved */
- __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
- __IO uint16_t RESERVEDC; /*!< Reserved */
-} USB_TypeDef;
-
-/**
- * @brief Window WATCHDOG
- */
-typedef struct
-{
- __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
- __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
- __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
-} WWDG_TypeDef;
-
-/**
- * @brief Universal Serial Bus Full Speed Device
- */
-/**
- * @}
- */
-
-/** @addtogroup Peripheral_memory_map
- * @{
- */
-
-#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
-#define FLASH_EEPROM_BASE ((uint32_t)(FLASH_BASE + 0x80000)) /*!< FLASH EEPROM base address in the alias region */
-#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
-#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
-#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
-#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
-#define FLASH_END ((uint32_t)0x0803FFFF) /*!< Program end FLASH address for Cat3 */
-#define FLASH_EEPROM_END ((uint32_t)0x08081FFF) /*!< FLASH EEPROM end address (8KB) */
-
-/*!< Peripheral memory map */
-#define APB1PERIPH_BASE PERIPH_BASE
-#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
-#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
-
-/*!< APB1 peripherals */
-#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000)
-#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400)
-#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800)
-#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00)
-#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000)
-#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400)
-#define RTC_BASE (APB1PERIPH_BASE + 0x00002800)
-#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00)
-#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000)
-#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800)
-#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00)
-#define USART2_BASE (APB1PERIPH_BASE + 0x00004400)
-#define USART3_BASE (APB1PERIPH_BASE + 0x00004800)
-#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400)
-#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800)
-
-/* USB device FS */
-#define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
-#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
-
-/* USB device FS SRAM */
-#define PWR_BASE (APB1PERIPH_BASE + 0x00007000)
-#define DAC_BASE (APB1PERIPH_BASE + 0x00007400)
-#define COMP_BASE (APB1PERIPH_BASE + 0x00007C00)
-#define RI_BASE (APB1PERIPH_BASE + 0x00007C04)
-#define OPAMP_BASE (APB1PERIPH_BASE + 0x00007C5C)
-
-/*!< APB2 peripherals */
-#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000)
-#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400)
-#define TIM9_BASE (APB2PERIPH_BASE + 0x00000800)
-#define TIM10_BASE (APB2PERIPH_BASE + 0x00000C00)
-#define TIM11_BASE (APB2PERIPH_BASE + 0x00001000)
-#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400)
-#define ADC_BASE (APB2PERIPH_BASE + 0x00002700)
-#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000)
-#define USART1_BASE (APB2PERIPH_BASE + 0x00003800)
-
-/*!< AHB peripherals */
-#define GPIOA_BASE (AHBPERIPH_BASE + 0x00000000)
-#define GPIOB_BASE (AHBPERIPH_BASE + 0x00000400)
-#define GPIOC_BASE (AHBPERIPH_BASE + 0x00000800)
-#define GPIOD_BASE (AHBPERIPH_BASE + 0x00000C00)
-#define GPIOE_BASE (AHBPERIPH_BASE + 0x00001000)
-#define GPIOH_BASE (AHBPERIPH_BASE + 0x00001400)
-#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
-#define RCC_BASE (AHBPERIPH_BASE + 0x00003800)
-#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00003C00) /*!< FLASH registers base address */
-#define OB_BASE ((uint32_t)0x1FF80000) /*!< FLASH Option Bytes base address */
-#define DMA1_BASE (AHBPERIPH_BASE + 0x00006000)
-#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
-#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
-#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
-#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
-#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
-#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
-#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
-#define DMA2_BASE (AHBPERIPH_BASE + 0x00006400)
-#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008)
-#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001C)
-#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030)
-#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044)
-#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058)
-#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
-
-/**
- * @}
- */
-
-/** @addtogroup Peripheral_declaration
- * @{
- */
-
-#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
-#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
-#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
-#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
-#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
-#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
-#define RTC ((RTC_TypeDef *) RTC_BASE)
-#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
-#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
-#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
-#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
-#define USART2 ((USART_TypeDef *) USART2_BASE)
-#define USART3 ((USART_TypeDef *) USART3_BASE)
-#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
-#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
-/* USB device FS */
-#define USB ((USB_TypeDef *) USB_BASE)
-/* USB device FS SRAM */
-#define PWR ((PWR_TypeDef *) PWR_BASE)
-#define DAC ((DAC_TypeDef *) DAC_BASE)
-#define COMP ((COMP_TypeDef *) COMP_BASE)
-#define COMP1 ((COMP_TypeDef *) COMP_BASE)
-#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000001))
-#define RI ((RI_TypeDef *) RI_BASE)
-#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
-#define OPAMP1 ((OPAMP_TypeDef *) OPAMP_BASE)
-#define OPAMP2 ((OPAMP_TypeDef *) (OPAMP_BASE + 0x00000001))
-#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
-#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
-#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
-#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
-#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
-#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
-#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
-#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
-#define USART1 ((USART_TypeDef *) USART1_BASE)
-#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
-#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
-#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
-#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
-#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
-#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
-#define CRC ((CRC_TypeDef *) CRC_BASE)
-#define RCC ((RCC_TypeDef *) RCC_BASE)
-#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
-#define OB ((OB_TypeDef *) OB_BASE)
-#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
-#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
-#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
-#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
-#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
-#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
-#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
-#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
-#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
-#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
-#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
-#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
-#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
-#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
-#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
-
- /**
- * @}
- */
-
-/** @addtogroup Exported_constants
- * @{
- */
-
-/** @addtogroup Peripheral_Registers_Bits_Definition
- * @{
- */
-
-/******************************************************************************/
-/* Peripheral Registers Bits Definition */
-/******************************************************************************/
-/******************************************************************************/
-/* */
-/* Analog to Digital Converter (ADC) */
-/* */
-/******************************************************************************/
-
-/******************** Bit definition for ADC_SR register ********************/
-#define ADC_SR_AWD ((uint32_t)0x00000001) /*!< Analog watchdog flag */
-#define ADC_SR_EOC ((uint32_t)0x00000002) /*!< End of conversion */
-#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!< Injected channel end of conversion */
-#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!< Injected channel Start flag */
-#define ADC_SR_STRT ((uint32_t)0x00000010) /*!< Regular channel Start flag */
-#define ADC_SR_OVR ((uint32_t)0x00000020) /*!< Overrun flag */
-#define ADC_SR_ADONS ((uint32_t)0x00000040) /*!< ADC ON status */
-#define ADC_SR_RCNR ((uint32_t)0x00000100) /*!< Regular channel not ready flag */
-#define ADC_SR_JCNR ((uint32_t)0x00000200) /*!< Injected channel not ready flag */
-
-/******************* Bit definition for ADC_CR1 register ********************/
-#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
-#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */
-#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */
-#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */
-#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */
-#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */
-#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */
-#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */
-#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */
-
-#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */
-#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */
-#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */
-#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */
-
-#define ADC_CR1_PDD ((uint32_t)0x00010000) /*!< Power Down during Delay phase */
-#define ADC_CR1_PDI ((uint32_t)0x00020000) /*!< Power Down during Idle phase */
-
-#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */
-#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
-
-#define ADC_CR1_RES ((uint32_t)0x03000000) /*!< RES[1:0] bits (Resolution) */
-#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!< Bit 0 */
-#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!< Bit 1 */
-
-#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!< Overrun interrupt enable */
-
-/******************* Bit definition for ADC_CR2 register ********************/
-#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */
-#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */
-#define ADC_CR2_CFG ((uint32_t)0x00000004) /*!< ADC Configuration */
-
-#define ADC_CR2_DELS ((uint32_t)0x00000070) /*!< DELS[2:0] bits (Delay selection) */
-#define ADC_CR2_DELS_0 ((uint32_t)0x00000010) /*!< Bit 0 */
-#define ADC_CR2_DELS_1 ((uint32_t)0x00000020) /*!< Bit 1 */
-#define ADC_CR2_DELS_2 ((uint32_t)0x00000040) /*!< Bit 2 */
-
-#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */
-#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!< DMA disable selection (Single ADC) */
-#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!< End of conversion selection */
-#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */
-
-#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!< JEXTSEL[3:0] bits (External event select for injected group) */
-#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!< Bit 2 */
-#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!< Bit 3 */
-
-#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!< JEXTEN[1:0] bits (External Trigger Conversion mode for injected channels) */
-#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-
-#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!< Start Conversion of injected channels */
-
-#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!< EXTSEL[3:0] bits (External Event Select for regular group) */
-#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */
-#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */
-#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */
-#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!< Bit 3 */
-
-#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
-#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!< Bit 0 */
-#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!< Bit 1 */
-
-#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!< Start Conversion of regular channels */
-
-/****************** Bit definition for ADC_SMPR1 register *******************/
-#define ADC_SMPR1_SMP20 ((uint32_t)0x00000007) /*!< SMP20[2:0] bits (Channel 20 Sample time selection) */
-#define ADC_SMPR1_SMP20_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SMPR1_SMP20_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SMPR1_SMP20_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP21 ((uint32_t)0x00000038) /*!< SMP21[2:0] bits (Channel 21 Sample time selection) */
-#define ADC_SMPR1_SMP21_0 ((uint32_t)0x00000008) /*!< Bit 0 */
-#define ADC_SMPR1_SMP21_1 ((uint32_t)0x00000010) /*!< Bit 1 */
-#define ADC_SMPR1_SMP21_2 ((uint32_t)0x00000020) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP22 ((uint32_t)0x000001C0) /*!< SMP22[2:0] bits (Channel 22 Sample time selection) */
-#define ADC_SMPR1_SMP22_0 ((uint32_t)0x00000040) /*!< Bit 0 */
-#define ADC_SMPR1_SMP22_1 ((uint32_t)0x00000080) /*!< Bit 1 */
-#define ADC_SMPR1_SMP22_2 ((uint32_t)0x00000100) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP23 ((uint32_t)0x00000E00) /*!< SMP23[2:0] bits (Channel 23 Sample time selection) */
-#define ADC_SMPR1_SMP23_0 ((uint32_t)0x00000200) /*!< Bit 0 */
-#define ADC_SMPR1_SMP23_1 ((uint32_t)0x00000400) /*!< Bit 1 */
-#define ADC_SMPR1_SMP23_2 ((uint32_t)0x00000800) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP24 ((uint32_t)0x00007000) /*!< SMP24[2:0] bits (Channel 24 Sample time selection) */
-#define ADC_SMPR1_SMP24_0 ((uint32_t)0x00001000) /*!< Bit 0 */
-#define ADC_SMPR1_SMP24_1 ((uint32_t)0x00002000) /*!< Bit 1 */
-#define ADC_SMPR1_SMP24_2 ((uint32_t)0x00004000) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP25 ((uint32_t)0x00038000) /*!< SMP25[2:0] bits (Channel 25 Sample time selection) */
-#define ADC_SMPR1_SMP25_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SMPR1_SMP25_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SMPR1_SMP25_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP26 ((uint32_t)0x001C0000) /*!< SMP26[2:0] bits (Channel 26 Sample time selection) */
-#define ADC_SMPR1_SMP26_0 ((uint32_t)0x00040000) /*!< Bit 0 */
-#define ADC_SMPR1_SMP26_1 ((uint32_t)0x00080000) /*!< Bit 1 */
-#define ADC_SMPR1_SMP26_2 ((uint32_t)0x00100000) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP27 ((uint32_t)0x00E00000) /*!< SMP27[2:0] bits (Channel 27 Sample time selection) */
-#define ADC_SMPR1_SMP27_0 ((uint32_t)0x00200000) /*!< Bit 0 */
-#define ADC_SMPR1_SMP27_1 ((uint32_t)0x00400000) /*!< Bit 1 */
-#define ADC_SMPR1_SMP27_2 ((uint32_t)0x00800000) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP28 ((uint32_t)0x07000000) /*!< SMP28[2:0] bits (Channel 28 Sample time selection) */
-#define ADC_SMPR1_SMP28_0 ((uint32_t)0x01000000) /*!< Bit 0 */
-#define ADC_SMPR1_SMP28_1 ((uint32_t)0x02000000) /*!< Bit 1 */
-#define ADC_SMPR1_SMP28_2 ((uint32_t)0x04000000) /*!< Bit 2 */
-
-#define ADC_SMPR1_SMP29 ((uint32_t)0x38000000) /*!< SMP29[2:0] bits (Channel 29 Sample time selection) */
-#define ADC_SMPR1_SMP29_0 ((uint32_t)0x08000000) /*!< Bit 0 */
-#define ADC_SMPR1_SMP29_1 ((uint32_t)0x10000000) /*!< Bit 1 */
-#define ADC_SMPR1_SMP29_2 ((uint32_t)0x20000000) /*!< Bit 2 */
-
-/****************** Bit definition for ADC_SMPR2 register *******************/
-#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */
-#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */
-#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */
-#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */
-#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */
-#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */
-#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */
-#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */
-#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */
-#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */
-#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */
-#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */
-#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */
-#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 5 Sample time selection) */
-#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */
-#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */
-#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */
-#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */
-#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */
-#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */
-#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< SMP18[2:0] bits (Channel 18 Sample time selection) */
-#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< Bit 0 */
-#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< Bit 1 */
-#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< Bit 2 */
-
-#define ADC_SMPR2_SMP19 ((uint32_t)0x38000000) /*!< SMP19[2:0] bits (Channel 19 Sample time selection) */
-#define ADC_SMPR2_SMP19_0 ((uint32_t)0x08000000) /*!< Bit 0 */
-#define ADC_SMPR2_SMP19_1 ((uint32_t)0x10000000) /*!< Bit 1 */
-#define ADC_SMPR2_SMP19_2 ((uint32_t)0x20000000) /*!< Bit 2 */
-
-/****************** Bit definition for ADC_SMPR3 register *******************/
-#define ADC_SMPR3_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */
-#define ADC_SMPR3_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SMPR3_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SMPR3_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */
-#define ADC_SMPR3_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
-#define ADC_SMPR3_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
-#define ADC_SMPR3_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */
-#define ADC_SMPR3_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */
-#define ADC_SMPR3_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */
-#define ADC_SMPR3_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */
-#define ADC_SMPR3_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */
-#define ADC_SMPR3_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */
-#define ADC_SMPR3_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */
-#define ADC_SMPR3_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */
-#define ADC_SMPR3_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */
-#define ADC_SMPR3_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */
-#define ADC_SMPR3_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SMPR3_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SMPR3_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */
-#define ADC_SMPR3_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */
-#define ADC_SMPR3_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */
-#define ADC_SMPR3_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */
-#define ADC_SMPR3_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */
-#define ADC_SMPR3_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */
-#define ADC_SMPR3_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */
-#define ADC_SMPR3_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */
-#define ADC_SMPR3_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */
-#define ADC_SMPR3_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */
-
-#define ADC_SMPR3_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */
-#define ADC_SMPR3_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */
-#define ADC_SMPR3_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */
-#define ADC_SMPR3_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */
-
-/****************** Bit definition for ADC_JOFR1 register *******************/
-#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 1 */
-
-/****************** Bit definition for ADC_JOFR2 register *******************/
-#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 2 */
-
-/****************** Bit definition for ADC_JOFR3 register *******************/
-#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 3 */
-
-/****************** Bit definition for ADC_JOFR4 register *******************/
-#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 4 */
-
-/******************* Bit definition for ADC_HTR register ********************/
-#define ADC_HTR_HT ((uint32_t)0x00000FFF) /*!< Analog watchdog high threshold */
-
-/******************* Bit definition for ADC_LTR register ********************/
-#define ADC_LTR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
-
-/******************* Bit definition for ADC_SQR1 register *******************/
-#define ADC_SQR1_L ((uint32_t)0x01F00000) /*!< L[4:0] bits (Regular channel sequence length) */
-#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */
-#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */
-#define ADC_SQR1_L_4 ((uint32_t)0x01000000) /*!< Bit 4 */
-
-#define ADC_SQR1_SQ28 ((uint32_t)0x000F8000) /*!< SQ28[4:0] bits (25th conversion in regular sequence) */
-#define ADC_SQR1_SQ28_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SQR1_SQ28_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SQR1_SQ28_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-#define ADC_SQR1_SQ28_3 ((uint32_t)0x00040000) /*!< Bit 3 */
-#define ADC_SQR1_SQ28_4 ((uint32_t)0x00080000) /*!< Bit 4 */
-
-#define ADC_SQR1_SQ27 ((uint32_t)0x00007C00) /*!< SQ27[4:0] bits (27th conversion in regular sequence) */
-#define ADC_SQR1_SQ27_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define ADC_SQR1_SQ27_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define ADC_SQR1_SQ27_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define ADC_SQR1_SQ27_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define ADC_SQR1_SQ27_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */
-#define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */
-
-#define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */
-#define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-/******************* Bit definition for ADC_SQR2 register *******************/
-#define ADC_SQR2_SQ19 ((uint32_t)0x0000001F) /*!< SQ19[4:0] bits (19th conversion in regular sequence) */
-#define ADC_SQR2_SQ19_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SQR2_SQ19_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SQR2_SQ19_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_SQR2_SQ19_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_SQR2_SQ19_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-#define ADC_SQR2_SQ20 ((uint32_t)0x000003E0) /*!< SQ20[4:0] bits (20th conversion in regular sequence) */
-#define ADC_SQR2_SQ20_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_SQR2_SQ20_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_SQR2_SQ20_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_SQR2_SQ20_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_SQR2_SQ20_4 ((uint32_t)0x00000200) /*!< Bit 4 */
-
-#define ADC_SQR2_SQ21 ((uint32_t)0x00007C00) /*!< SQ21[4:0] bits (21th conversion in regular sequence) */
-#define ADC_SQR2_SQ21_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define ADC_SQR2_SQ21_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define ADC_SQR2_SQ21_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define ADC_SQR2_SQ21_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define ADC_SQR2_SQ21_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define ADC_SQR2_SQ22 ((uint32_t)0x000F8000) /*!< SQ22[4:0] bits (22th conversion in regular sequence) */
-#define ADC_SQR2_SQ22_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SQR2_SQ22_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SQR2_SQ22_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-#define ADC_SQR2_SQ22_3 ((uint32_t)0x00040000) /*!< Bit 3 */
-#define ADC_SQR2_SQ22_4 ((uint32_t)0x00080000) /*!< Bit 4 */
-
-#define ADC_SQR2_SQ23 ((uint32_t)0x01F00000) /*!< SQ23[4:0] bits (23th conversion in regular sequence) */
-#define ADC_SQR2_SQ23_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_SQR2_SQ23_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-#define ADC_SQR2_SQ23_2 ((uint32_t)0x00400000) /*!< Bit 2 */
-#define ADC_SQR2_SQ23_3 ((uint32_t)0x00800000) /*!< Bit 3 */
-#define ADC_SQR2_SQ23_4 ((uint32_t)0x01000000) /*!< Bit 4 */
-
-#define ADC_SQR2_SQ24 ((uint32_t)0x3E000000) /*!< SQ24[4:0] bits (24th conversion in regular sequence) */
-#define ADC_SQR2_SQ24_0 ((uint32_t)0x02000000) /*!< Bit 0 */
-#define ADC_SQR2_SQ24_1 ((uint32_t)0x04000000) /*!< Bit 1 */
-#define ADC_SQR2_SQ24_2 ((uint32_t)0x08000000) /*!< Bit 2 */
-#define ADC_SQR2_SQ24_3 ((uint32_t)0x10000000) /*!< Bit 3 */
-#define ADC_SQR2_SQ24_4 ((uint32_t)0x20000000) /*!< Bit 4 */
-
-/******************* Bit definition for ADC_SQR3 register *******************/
-#define ADC_SQR3_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */
-#define ADC_SQR3_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SQR3_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SQR3_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_SQR3_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_SQR3_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-#define ADC_SQR3_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */
-#define ADC_SQR3_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_SQR3_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_SQR3_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_SQR3_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_SQR3_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */
-
-#define ADC_SQR3_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */
-#define ADC_SQR3_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define ADC_SQR3_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define ADC_SQR3_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define ADC_SQR3_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define ADC_SQR3_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define ADC_SQR3_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */
-#define ADC_SQR3_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SQR3_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SQR3_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-#define ADC_SQR3_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */
-#define ADC_SQR3_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */
-
-#define ADC_SQR3_SQ17 ((uint32_t)0x01F00000) /*!< SQ17[4:0] bits (17th conversion in regular sequence) */
-#define ADC_SQR3_SQ17_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_SQR3_SQ17_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-#define ADC_SQR3_SQ17_2 ((uint32_t)0x00400000) /*!< Bit 2 */
-#define ADC_SQR3_SQ17_3 ((uint32_t)0x00800000) /*!< Bit 3 */
-#define ADC_SQR3_SQ17_4 ((uint32_t)0x01000000) /*!< Bit 4 */
-
-#define ADC_SQR3_SQ18 ((uint32_t)0x3E000000) /*!< SQ18[4:0] bits (18th conversion in regular sequence) */
-#define ADC_SQR3_SQ18_0 ((uint32_t)0x02000000) /*!< Bit 0 */
-#define ADC_SQR3_SQ18_1 ((uint32_t)0x04000000) /*!< Bit 1 */
-#define ADC_SQR3_SQ18_2 ((uint32_t)0x08000000) /*!< Bit 2 */
-#define ADC_SQR3_SQ18_3 ((uint32_t)0x10000000) /*!< Bit 3 */
-#define ADC_SQR3_SQ18_4 ((uint32_t)0x20000000) /*!< Bit 4 */
-
-/******************* Bit definition for ADC_SQR4 register *******************/
-#define ADC_SQR4_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */
-#define ADC_SQR4_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SQR4_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SQR4_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_SQR4_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_SQR4_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-#define ADC_SQR4_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */
-#define ADC_SQR4_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_SQR4_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_SQR4_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_SQR4_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_SQR4_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */
-
-#define ADC_SQR4_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */
-#define ADC_SQR4_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define ADC_SQR4_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define ADC_SQR4_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define ADC_SQR4_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define ADC_SQR4_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define ADC_SQR4_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */
-#define ADC_SQR4_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SQR4_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SQR4_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-#define ADC_SQR4_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */
-#define ADC_SQR4_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */
-
-#define ADC_SQR4_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */
-#define ADC_SQR4_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_SQR4_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-#define ADC_SQR4_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */
-#define ADC_SQR4_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */
-#define ADC_SQR4_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */
-
-#define ADC_SQR4_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */
-#define ADC_SQR4_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */
-#define ADC_SQR4_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */
-#define ADC_SQR4_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */
-#define ADC_SQR4_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */
-#define ADC_SQR4_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */
-
-/******************* Bit definition for ADC_SQR5 register *******************/
-#define ADC_SQR5_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */
-#define ADC_SQR5_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SQR5_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SQR5_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_SQR5_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_SQR5_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-#define ADC_SQR5_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */
-#define ADC_SQR5_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_SQR5_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_SQR5_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_SQR5_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_SQR5_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */
-
-#define ADC_SQR5_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */
-#define ADC_SQR5_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define ADC_SQR5_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define ADC_SQR5_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define ADC_SQR5_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define ADC_SQR5_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define ADC_SQR5_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */
-#define ADC_SQR5_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_SQR5_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_SQR5_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-#define ADC_SQR5_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */
-#define ADC_SQR5_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */
-
-#define ADC_SQR5_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */
-#define ADC_SQR5_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_SQR5_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-#define ADC_SQR5_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */
-#define ADC_SQR5_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */
-#define ADC_SQR5_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */
-
-#define ADC_SQR5_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */
-#define ADC_SQR5_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */
-#define ADC_SQR5_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */
-#define ADC_SQR5_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */
-#define ADC_SQR5_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */
-#define ADC_SQR5_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */
-
-
-/******************* Bit definition for ADC_JSQR register *******************/
-#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */
-#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-
-#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */
-#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */
-
-#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */
-#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */
-#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */
-#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */
-#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */
-#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */
-#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */
-
-#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */
-#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-
-/******************* Bit definition for ADC_JDR1 register *******************/
-#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
-
-/******************* Bit definition for ADC_JDR2 register *******************/
-#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
-
-/******************* Bit definition for ADC_JDR3 register *******************/
-#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
-
-/******************* Bit definition for ADC_JDR4 register *******************/
-#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
-
-/******************** Bit definition for ADC_DR register ********************/
-#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
-
-/******************* Bit definition for ADC_CSR register ********************/
-#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!< ADC1 Analog watchdog flag */
-#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!< ADC1 End of conversion */
-#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!< ADC1 Injected channel end of conversion */
-#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!< ADC1 Injected channel Start flag */
-#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!< ADC1 Regular channel Start flag */
-#define ADC_CSR_OVR1 ((uint32_t)0x00000020) /*!< ADC1 overrun flag */
-#define ADC_CSR_ADONS1 ((uint32_t)0x00000040) /*!< ADON status of ADC1 */
-
-/******************* Bit definition for ADC_CCR register ********************/
-#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!< ADC prescaler*/
-#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */
-
-/******************************************************************************/
-/* */
-/* Analog Comparators (COMP) */
-/* */
-/******************************************************************************/
-
-/****************** Bit definition for COMP_CSR register ********************/
-#define COMP_CSR_10KPU ((uint32_t)0x00000001) /*!< 10K pull-up resistor */
-#define COMP_CSR_400KPU ((uint32_t)0x00000002) /*!< 400K pull-up resistor */
-#define COMP_CSR_10KPD ((uint32_t)0x00000004) /*!< 10K pull-down resistor */
-#define COMP_CSR_400KPD ((uint32_t)0x00000008) /*!< 400K pull-down resistor */
-#define COMP_CSR_CMP1EN ((uint32_t)0x00000010) /*!< Comparator 1 enable */
-#define COMP_CSR_CMP1OUT ((uint32_t)0x00000080) /*!< Comparator 1 output */
-
-#define COMP_CSR_SPEED ((uint32_t)0x00001000) /*!< Comparator 2 speed */
-#define COMP_CSR_CMP2OUT ((uint32_t)0x00002000) /*!< Comparator 2 ouput */
-#define COMP_CSR_VREFOUTEN ((uint32_t)0x00010000) /*!< Comparator Vref Enable */
-#define COMP_CSR_WNDWE ((uint32_t)0x00020000) /*!< Window mode enable */
-#define COMP_CSR_INSEL ((uint32_t)0x001C0000) /*!< INSEL[2:0] Inversion input Selection */
-#define COMP_CSR_INSEL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
-#define COMP_CSR_INSEL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
-#define COMP_CSR_INSEL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
-#define COMP_CSR_OUTSEL ((uint32_t)0x00E00000) /*!< OUTSEL[2:0] comparator 2 output redirection */
-#define COMP_CSR_OUTSEL_0 ((uint32_t)0x00200000) /*!< Bit 0 */
-#define COMP_CSR_OUTSEL_1 ((uint32_t)0x00400000) /*!< Bit 1 */
-#define COMP_CSR_OUTSEL_2 ((uint32_t)0x00800000) /*!< Bit 2 */
-
-#define COMP_CSR_FCH3 ((uint32_t)0x04000000) /*!< Bit 26 */
-#define COMP_CSR_FCH8 ((uint32_t)0x08000000) /*!< Bit 27 */
-#define COMP_CSR_RCH13 ((uint32_t)0x10000000) /*!< Bit 28 */
-
-#define COMP_CSR_CAIE ((uint32_t)0x20000000) /*!< Bit 29 */
-#define COMP_CSR_CAIF ((uint32_t)0x40000000) /*!< Bit 30 */
-#define COMP_CSR_TSUSP ((uint32_t)0x80000000) /*!< Bit 31 */
-
-/******************************************************************************/
-/* */
-/* Operational Amplifier (OPAMP) */
-/* */
-/******************************************************************************/
-/******************* Bit definition for OPAMP_CSR register ******************/
-#define OPAMP_CSR_OPA1PD ((uint32_t)0x00000001) /*!< OPAMP1 disable */
-#define OPAMP_CSR_S3SEL1 ((uint32_t)0x00000002) /*!< Switch 3 for OPAMP1 Enable */
-#define OPAMP_CSR_S4SEL1 ((uint32_t)0x00000004) /*!< Switch 4 for OPAMP1 Enable */
-#define OPAMP_CSR_S5SEL1 ((uint32_t)0x00000008) /*!< Switch 5 for OPAMP1 Enable */
-#define OPAMP_CSR_S6SEL1 ((uint32_t)0x00000010) /*!< Switch 6 for OPAMP1 Enable */
-#define OPAMP_CSR_OPA1CAL_L ((uint32_t)0x00000020) /*!< OPAMP1 Offset calibration for P differential pair */
-#define OPAMP_CSR_OPA1CAL_H ((uint32_t)0x00000040) /*!< OPAMP1 Offset calibration for N differential pair */
-#define OPAMP_CSR_OPA1LPM ((uint32_t)0x00000080) /*!< OPAMP1 Low power enable */
-#define OPAMP_CSR_OPA2PD ((uint32_t)0x00000100) /*!< OPAMP2 disable */
-#define OPAMP_CSR_S3SEL2 ((uint32_t)0x00000200) /*!< Switch 3 for OPAMP2 Enable */
-#define OPAMP_CSR_S4SEL2 ((uint32_t)0x00000400) /*!< Switch 4 for OPAMP2 Enable */
-#define OPAMP_CSR_S5SEL2 ((uint32_t)0x00000800) /*!< Switch 5 for OPAMP2 Enable */
-#define OPAMP_CSR_S6SEL2 ((uint32_t)0x00001000) /*!< Switch 6 for OPAMP2 Enable */
-#define OPAMP_CSR_OPA2CAL_L ((uint32_t)0x00002000) /*!< OPAMP2 Offset calibration for P differential pair */
-#define OPAMP_CSR_OPA2CAL_H ((uint32_t)0x00004000) /*!< OPAMP2 Offset calibration for N differential pair */
-#define OPAMP_CSR_OPA2LPM ((uint32_t)0x00008000) /*!< OPAMP2 Low power enable */
-#define OPAMP_CSR_ANAWSEL1 ((uint32_t)0x01000000) /*!< Switch ANA Enable for OPAMP1 */
-#define OPAMP_CSR_ANAWSEL2 ((uint32_t)0x02000000) /*!< Switch ANA Enable for OPAMP2 */
-#define OPAMP_CSR_S7SEL2 ((uint32_t)0x08000000) /*!< Switch 7 for OPAMP2 Enable */
-#define OPAMP_CSR_AOP_RANGE ((uint32_t)0x10000000) /*!< Power range selection */
-#define OPAMP_CSR_OPA1CALOUT ((uint32_t)0x20000000) /*!< OPAMP1 calibration output */
-#define OPAMP_CSR_OPA2CALOUT ((uint32_t)0x40000000) /*!< OPAMP2 calibration output */
-
-/******************* Bit definition for OPAMP_OTR register ******************/
-#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */
-#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */
-#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */
-#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */
-#define OPAMP_OTR_OT_USER ((uint32_t)0x80000000) /*!< Switch to OPAMP offset user trimmed values */
-
-/******************* Bit definition for OPAMP_LPOTR register ****************/
-#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */
-#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */
-#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */
-#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */
-
-/******************************************************************************/
-/* */
-/* CRC calculation unit (CRC) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for CRC_DR register *********************/
-#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
-
-/******************* Bit definition for CRC_IDR register ********************/
-#define CRC_IDR_IDR ((uint32_t)0x000000FF) /*!< General-purpose 8-bit data register bits */
-
-/******************** Bit definition for CRC_CR register ********************/
-#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */
-
-/******************************************************************************/
-/* */
-/* Digital to Analog Converter (DAC) */
-/* */
-/******************************************************************************/
-
-/******************** Bit definition for DAC_CR register ********************/
-#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!<DAC channel1 enable */
-#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!<DAC channel1 output buffer disable */
-#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!<DAC channel1 Trigger enable */
-
-#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
-#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
-#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
-#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
-
-#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
-#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!<Bit 0 */
-#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!<Bit 1 */
-
-#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
-#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!<Bit 2 */
-#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */
-
-#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */
-#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA Interrupt enable */
-#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */
-#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */
-#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */
-
-#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
-#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!<Bit 0 */
-#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!<Bit 1 */
-#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!<Bit 2 */
-
-#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
-#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!<Bit 0 */
-#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!<Bit 1 */
-
-#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
-#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
-#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
-#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
-#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
-
-#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */
-#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun interrupt enable */
-/***************** Bit definition for DAC_SWTRIGR register ******************/
-#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!<DAC channel1 software trigger */
-#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!<DAC channel2 software trigger */
-
-/***************** Bit definition for DAC_DHR12R1 register ******************/
-#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
-
-/***************** Bit definition for DAC_DHR12L1 register ******************/
-#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
-
-/****************** Bit definition for DAC_DHR8R1 register ******************/
-#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!<DAC channel1 8-bit Right aligned data */
-
-/***************** Bit definition for DAC_DHR12R2 register ******************/
-#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!<DAC channel2 12-bit Right aligned data */
-
-/***************** Bit definition for DAC_DHR12L2 register ******************/
-#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!<DAC channel2 12-bit Left aligned data */
-
-/****************** Bit definition for DAC_DHR8R2 register ******************/
-#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!<DAC channel2 8-bit Right aligned data */
-
-/***************** Bit definition for DAC_DHR12RD register ******************/
-#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
-#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!<DAC channel2 12-bit Right aligned data */
-
-/***************** Bit definition for DAC_DHR12LD register ******************/
-#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
-#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!<DAC channel2 12-bit Left aligned data */
-
-/****************** Bit definition for DAC_DHR8RD register ******************/
-#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!<DAC channel1 8-bit Right aligned data */
-#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!<DAC channel2 8-bit Right aligned data */
-
-/******************* Bit definition for DAC_DOR1 register *******************/
-#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!<DAC channel1 data output */
-
-/******************* Bit definition for DAC_DOR2 register *******************/
-#define DAC_DOR2_DACC2DOR ((uint_t)0x00000FFF) /*!<DAC channel2 data output */
-
-/******************** Bit definition for DAC_SR register ********************/
-#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun flag */
-#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun flag */
-
-/******************************************************************************/
-/* */
-/* Debug MCU (DBGMCU) */
-/* */
-/******************************************************************************/
-
-/**************** Bit definition for DBGMCU_IDCODE register *****************/
-#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
-
-#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
-#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
-#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
-#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
-#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
-#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
-#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
-#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
-#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
-#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
-#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
-#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
-#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
-#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
-#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
-
-/****************** Bit definition for DBGMCU_CR register *******************/
-#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */
-#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
-#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
-#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */
-
-#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */
-#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */
-#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */
-
-/****************** Bit definition for DBGMCU_APB1_FZ register **************/
-
-#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004) /*!< TIM4 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008) /*!< TIM5 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Counter stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< SMBUS timeout mode stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) /*!< SMBUS timeout mode stopped when Core is halted */
-
-/****************** Bit definition for DBGMCU_APB2_FZ register **************/
-
-#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00000004) /*!< TIM9 counter stopped when core is halted */
-#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00000008) /*!< TIM10 counter stopped when core is halted */
-#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00000010) /*!< TIM11 counter stopped when core is halted */
-
-/******************************************************************************/
-/* */
-/* DMA Controller (DMA) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for DMA_ISR register ********************/
-#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
-#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
-#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
-#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
-#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
-#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
-#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
-#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
-#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
-#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
-#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
-#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
-#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
-#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
-#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
-#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
-#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
-#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
-#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
-#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
-#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
-#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
-#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
-#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
-#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
-#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
-#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
-#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
-
-/******************* Bit definition for DMA_IFCR register *******************/
-#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
-#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
-#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
-#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
-#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
-#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
-#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
-#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
-#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
-#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
-#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
-#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
-#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
-#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
-#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
-#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
-#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
-#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
-#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
-#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
-#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
-#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
-#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
-#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
-#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
-#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
-#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
-#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
-
-/******************* Bit definition for DMA_CCR register *******************/
-#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable*/
-#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
-#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
-#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
-#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
-#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
-#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
-#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
-
-#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
-#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
-#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
-
-#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
-#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-
-#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level) */
-#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
-#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
-
-#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
-
-/****************** Bit definition for DMA_CNDTR1 register ******************/
-#define DMA_CNDTR1_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CNDTR2 register ******************/
-#define DMA_CNDTR2_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CNDTR3 register ******************/
-#define DMA_CNDTR3_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CNDTR4 register ******************/
-#define DMA_CNDTR4_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CNDTR5 register ******************/
-#define DMA_CNDTR5_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CNDTR6 register ******************/
-#define DMA_CNDTR6_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CNDTR7 register ******************/
-#define DMA_CNDTR7_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CPAR1 register *******************/
-#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-/****************** Bit definition for DMA_CPAR2 register *******************/
-#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-/****************** Bit definition for DMA_CPAR3 register *******************/
-#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-
-/****************** Bit definition for DMA_CPAR4 register *******************/
-#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-/****************** Bit definition for DMA_CPAR5 register *******************/
-#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-/****************** Bit definition for DMA_CPAR6 register *******************/
-#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-
-/****************** Bit definition for DMA_CPAR7 register *******************/
-#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
-
-/****************** Bit definition for DMA_CMAR1 register *******************/
-#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-/****************** Bit definition for DMA_CMAR2 register *******************/
-#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-/****************** Bit definition for DMA_CMAR3 register *******************/
-#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-
-/****************** Bit definition for DMA_CMAR4 register *******************/
-#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-/****************** Bit definition for DMA_CMAR5 register *******************/
-#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-/****************** Bit definition for DMA_CMAR6 register *******************/
-#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-/****************** Bit definition for DMA_CMAR7 register *******************/
-#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-
-/******************************************************************************/
-/* */
-/* External Interrupt/Event Controller (EXTI) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for EXTI_IMR register *******************/
-#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
-#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
-#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
-#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
-#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
-#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
-#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
-#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
-#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
-#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
-#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
-#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
-#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
-#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
-#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
-#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
-#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
-#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
-#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
-#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
-#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
-#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
-#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
-#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
-
-/******************* Bit definition for EXTI_EMR register *******************/
-#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
-#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
-#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
-#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
-#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
-#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
-#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
-#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
-#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
-#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
-#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
-#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
-#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
-#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
-#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
-#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
-#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
-#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
-#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
-#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
-#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
-#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
-#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
-#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
-
-/****************** Bit definition for EXTI_RTSR register *******************/
-#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
-#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
-#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
-#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
-#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
-#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
-#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
-#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
-#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
-#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
-#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
-#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
-#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
-#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
-#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
-#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
-#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
-#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
-#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
-#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
-#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
-#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
-#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
-#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
-
-/****************** Bit definition for EXTI_FTSR register *******************/
-#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
-#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
-#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
-#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
-#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
-#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
-#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
-#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
-#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
-#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
-#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
-#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
-#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
-#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
-#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
-#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
-#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
-#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
-#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
-#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
-#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
-#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
-#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
-#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
-
-/****************** Bit definition for EXTI_SWIER register ******************/
-#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
-#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
-#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
-#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
-#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
-#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
-#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
-#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
-#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
-#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
-#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
-#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
-#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
-#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
-#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
-#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
-#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
-#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
-#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
-#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
-#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
-#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
-#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
-#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
-
-/******************* Bit definition for EXTI_PR register ********************/
-#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
-#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
-#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
-#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
-#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
-#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
-#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
-#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
-#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
-#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
-#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
-#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
-#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
-#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
-#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
-#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
-#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
-#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
-#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit 18 */
-#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
-#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
-#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
-#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
-#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit 23 */
-
-/******************************************************************************/
-/* */
-/* FLASH, DATA EEPROM and Option Bytes Registers */
-/* (FLASH, DATA_EEPROM, OB) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for FLASH_ACR register ******************/
-#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< Latency */
-#define FLASH_ACR_PRFTEN ((uint32_t)0x00000002) /*!< Prefetch Buffer Enable */
-#define FLASH_ACR_ACC64 ((uint32_t)0x00000004) /*!< Access 64 bits */
-#define FLASH_ACR_SLEEP_PD ((uint32_t)0x00000008) /*!< Flash mode during sleep mode */
-#define FLASH_ACR_RUN_PD ((uint32_t)0x00000010) /*!< Flash mode during RUN mode */
-
-/******************* Bit definition for FLASH_PECR register ******************/
-#define FLASH_PECR_PELOCK ((uint32_t)0x00000001) /*!< FLASH_PECR and Flash data Lock */
-#define FLASH_PECR_PRGLOCK ((uint32_t)0x00000002) /*!< Program matrix Lock */
-#define FLASH_PECR_OPTLOCK ((uint32_t)0x00000004) /*!< Option byte matrix Lock */
-#define FLASH_PECR_PROG ((uint32_t)0x00000008) /*!< Program matrix selection */
-#define FLASH_PECR_DATA ((uint32_t)0x00000010) /*!< Data matrix selection */
-#define FLASH_PECR_FTDW ((uint32_t)0x00000100) /*!< Fixed Time Data write for Word/Half Word/Byte programming */
-#define FLASH_PECR_ERASE ((uint32_t)0x00000200) /*!< Page erasing mode */
-#define FLASH_PECR_FPRG ((uint32_t)0x00000400) /*!< Fast Page/Half Page programming mode */
-#define FLASH_PECR_EOPIE ((uint32_t)0x00010000) /*!< End of programming interrupt */
-#define FLASH_PECR_ERRIE ((uint32_t)0x00020000) /*!< Error interrupt */
-#define FLASH_PECR_OBL_LAUNCH ((uint32_t)0x00040000) /*!< Launch the option byte loading */
-
-/****************** Bit definition for FLASH_PDKEYR register ******************/
-#define FLASH_PDKEYR_PDKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */
-
-/****************** Bit definition for FLASH_PEKEYR register ******************/
-#define FLASH_PEKEYR_PEKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */
-
-/****************** Bit definition for FLASH_PRGKEYR register ******************/
-#define FLASH_PRGKEYR_PRGKEYR ((uint32_t)0xFFFFFFFF) /*!< Program matrix Key */
-
-/****************** Bit definition for FLASH_OPTKEYR register ******************/
-#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option bytes matrix Key */
-
-/****************** Bit definition for FLASH_SR register *******************/
-#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
-#define FLASH_SR_EOP ((uint32_t)0x00000002) /*!< End Of Programming*/
-#define FLASH_SR_ENDHV ((uint32_t)0x00000004) /*!< End of high voltage */
-#define FLASH_SR_READY ((uint32_t)0x00000008) /*!< Flash ready after low power mode */
-
-#define FLASH_SR_WRPERR ((uint32_t)0x00000100) /*!< Write protected error */
-#define FLASH_SR_PGAERR ((uint32_t)0x00000200) /*!< Programming Alignment Error */
-#define FLASH_SR_SIZERR ((uint32_t)0x00000400) /*!< Size error */
-#define FLASH_SR_OPTVERR ((uint32_t)0x00000800) /*!< Option validity error */
-#define FLASH_SR_OPTVERRUSR ((uint32_t)0x00001000) /*!< Option User validity error */
-#define FLASH_SR_RDERR ((uint32_t)0x00002000) /*!< Read protected error */
-
-/****************** Bit definition for FLASH_OBR register *******************/
-#define FLASH_OBR_RDPRT ((uint32_t)0x000000FF) /*!< Read Protection */
-#define FLASH_OBR_SPRMOD ((uint32_t)0x00000100) /*!< Selection of protection mode of WPRi bits */
-#define FLASH_OBR_BOR_LEV ((uint32_t)0x000F0000) /*!< BOR_LEV[3:0] Brown Out Reset Threshold Level*/
-#define FLASH_OBR_USER ((uint32_t)0x00700000) /*!< User Option Bytes */
-#define FLASH_OBR_IWDG_SW ((uint32_t)0x00100000) /*!< IWDG_SW */
-#define FLASH_OBR_nRST_STOP ((uint32_t)0x00200000) /*!< nRST_STOP */
-#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00400000) /*!< nRST_STDBY */
-
-/****************** Bit definition for FLASH_WRPR register ******************/
-#define FLASH_WRPR1_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
-#define FLASH_WRPR2_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
-
-/******************************************************************************/
-/* */
-/* General Purpose I/O */
-/* */
-/******************************************************************************/
-/****************** Bits definition for GPIO_MODER register *****************/
-#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
-#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
-#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
-
-#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
-#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
-#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
-
-#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
-#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
-#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
-
-#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
-#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
-#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
-
-#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
-#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
-#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
-
-#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
-#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
-#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
-
-#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
-#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
-#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
-
-#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
-#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
-#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
-
-#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
-#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
-#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
-
-#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
-#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
-#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
-
-#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
-#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
-#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
-
-#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
-#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
-#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
-
-#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
-#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
-#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
-
-#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
-#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
-#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
-
-#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
-#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
-#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
-
-#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
-#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
-#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
-
-/****************** Bits definition for GPIO_OTYPER register ****************/
-#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
-#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
-#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
-#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
-#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
-#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
-#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
-#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
-#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
-#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
-#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
-#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
-#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
-#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
-#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
-#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
-
-/****************** Bits definition for GPIO_OSPEEDR register ***************/
-#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
-#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
-#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
-
-#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
-#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
-#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
-
-#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
-#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
-#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
-
-#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
-#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
-#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
-
-#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
-#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
-#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
-
-#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
-#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
-#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
-
-#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
-#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
-#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
-
-#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
-#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
-#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
-
-#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
-#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
-#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
-
-#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
-#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
-#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
-
-#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
-#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
-#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
-
-#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
-#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
-#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
-
-#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
-#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
-#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
-
-#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
-#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
-#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
-
-#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
-#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
-#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
-
-#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
-#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
-#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
-
-/****************** Bits definition for GPIO_PUPDR register *****************/
-#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
-#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
-#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
-
-#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
-#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
-#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
-
-#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
-#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
-#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
-
-#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
-#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
-#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
-
-#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
-#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
-#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
-
-#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
-#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
-#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
-
-#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
-#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
-#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
-
-#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
-#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
-#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
-
-#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
-#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
-#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
-
-#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
-#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
-#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
-
-#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
-#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
-#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
-
-#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
-#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
-#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
-
-#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
-#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
-#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
-
-#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
-#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
-#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
-
-#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
-#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
-#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
-#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
-#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
-#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
-
-/****************** Bits definition for GPIO_IDR register *******************/
-#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
-#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
-#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
-#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
-#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
-#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
-#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
-#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
-#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
-#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
-#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
-#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
-#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
-#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
-#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
-#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
-
-/****************** Bits definition for GPIO_ODR register *******************/
-#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
-#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
-#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
-#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
-#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
-#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
-#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
-#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
-#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
-#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
-#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
-#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
-#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
-#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
-#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
-#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
-
-/****************** Bits definition for GPIO_BSRR register ******************/
-#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
-#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
-#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
-#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
-#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
-#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
-#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
-#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
-#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
-#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
-#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
-#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
-#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
-#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
-#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
-#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
-#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
-#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
-#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
-#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
-#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
-#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
-#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
-#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
-#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
-#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
-#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
-#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
-#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
-#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
-#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
-#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
-
-/****************** Bit definition for GPIO_LCKR register ********************/
-#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
-#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
-#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
-#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
-#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
-#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
-#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
-#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
-#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
-#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
-#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
-#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
-#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
-#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
-#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
-#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
-#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
-
-/****************** Bit definition for GPIO_AFRL register ********************/
-#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
-#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
-#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
-#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
-#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
-#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
-#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
-#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
-
-/****************** Bit definition for GPIO_AFRH register ********************/
-#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
-#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
-#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
-#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
-#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
-#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
-#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
-#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
-
-/****************** Bit definition for GPIO_BRR register *********************/
-#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
-#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
-#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
-#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
-#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
-#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
-#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
-#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
-#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
-#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
-#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
-#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
-#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
-#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
-#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
-#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
-
-
-/******************************************************************************/
-/* */
-/* Inter-integrated Circuit Interface (I2C) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for I2C_CR1 register ********************/
-#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral Enable */
-#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!< SMBus Mode */
-#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!< SMBus Type */
-#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!< ARP Enable */
-#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!< PEC Enable */
-#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!< General Call Enable */
-#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!< Clock Stretching Disable (Slave mode) */
-#define I2C_CR1_START ((uint32_t)0x00000100) /*!< Start Generation */
-#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!< Stop Generation */
-#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!< Acknowledge Enable */
-#define I2C_CR1_POS ((uint32_t)0x00000800) /*!< Acknowledge/PEC Position (for data reception) */
-#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!< Packet Error Checking */
-#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!< SMBus Alert */
-#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!< Software Reset */
-
-/******************* Bit definition for I2C_CR2 register ********************/
-#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */
-#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-
-#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!< Error Interrupt Enable */
-#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!< Event Interrupt Enable */
-#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!< Buffer Interrupt Enable */
-#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!< DMA Requests Enable */
-#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!< DMA Last Transfer */
-
-/******************* Bit definition for I2C_OAR1 register *******************/
-#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!< Interface Address */
-#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!< Interface Address */
-
-#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!< Bit 9 */
-
-#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!< Addressing Mode (Slave mode) */
-
-/******************* Bit definition for I2C_OAR2 register *******************/
-#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!< Dual addressing mode enable */
-#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!< Interface address */
-
-/******************** Bit definition for I2C_DR register ********************/
-#define I2C_DR_DR ((uint32_t)0x000000FF) /*!< 8-bit Data Register */
-
-/******************* Bit definition for I2C_SR1 register ********************/
-#define I2C_SR1_SB ((uint32_t)0x00000001) /*!< Start Bit (Master mode) */
-#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!< Address sent (master mode)/matched (slave mode) */
-#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!< Byte Transfer Finished */
-#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!< 10-bit header sent (Master mode) */
-#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!< Stop detection (Slave mode) */
-#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!< Data Register not Empty (receivers) */
-#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!< Data Register Empty (transmitters) */
-#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!< Bus Error */
-#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!< Arbitration Lost (master mode) */
-#define I2C_SR1_AF ((uint32_t)0x00000400) /*!< Acknowledge Failure */
-#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!< Overrun/Underrun */
-#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!< PEC Error in reception */
-#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!< Timeout or Tlow Error */
-#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!< SMBus Alert */
-
-/******************* Bit definition for I2C_SR2 register ********************/
-#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!< Master/Slave */
-#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!< Bus Busy */
-#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!< Transmitter/Receiver */
-#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!< General Call Address (Slave mode) */
-#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!< SMBus Device Default Address (Slave mode) */
-#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!< SMBus Host Header (Slave mode) */
-#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!< Dual Flag (Slave mode) */
-#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!< Packet Error Checking Register */
-
-/******************* Bit definition for I2C_CCR register ********************/
-#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */
-#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!< Fast Mode Duty Cycle */
-#define I2C_CCR_FS ((uint32_t)0x00008000) /*!< I2C Master Mode Selection */
-
-/****************** Bit definition for I2C_TRISE register *******************/
-#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
-
-/******************************************************************************/
-/* */
-/* Independent WATCHDOG (IWDG) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for IWDG_KR register ********************/
-#define IWDG_KR_KEY ((uint32_t)0x0000FFFF) /*!< Key value (write only, read 0000h) */
-
-/******************* Bit definition for IWDG_PR register ********************/
-#define IWDG_PR_PR ((uint32_t)0x00000007) /*!< PR[2:0] (Prescaler divider) */
-#define IWDG_PR_PR_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define IWDG_PR_PR_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define IWDG_PR_PR_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-
-/******************* Bit definition for IWDG_RLR register *******************/
-#define IWDG_RLR_RL ((uint32_t)0x00000FFF) /*!< Watchdog counter reload value */
-
-/******************* Bit definition for IWDG_SR register ********************/
-#define IWDG_SR_PVU ((uint32_t)0x00000001) /*!< Watchdog prescaler value update */
-#define IWDG_SR_RVU ((uint32_t)0x00000002) /*!< Watchdog counter reload value update */
-
-/******************************************************************************/
-/* */
-/* Power Control (PWR) */
-/* */
-/******************************************************************************/
-
-/******************** Bit definition for PWR_CR register ********************/
-#define PWR_CR_LPSDSR ((uint32_t)0x00000001) /*!< Low-power deepsleep/sleep/low power run */
-#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
-#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
-#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
-#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
-
-#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
-#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-
-/*!< PVD level configuration */
-#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
-#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
-#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
-#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
-#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
-#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
-#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
-#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
-
-#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
-#define PWR_CR_ULP ((uint32_t)0x00000200) /*!< Ultra Low Power mode */
-#define PWR_CR_FWU ((uint32_t)0x00000400) /*!< Fast wakeup */
-
-#define PWR_CR_VOS ((uint32_t)0x00001800) /*!< VOS[1:0] bits (Voltage scaling range selection) */
-#define PWR_CR_VOS_0 ((uint32_t)0x00000800) /*!< Bit 0 */
-#define PWR_CR_VOS_1 ((uint32_t)0x00001000) /*!< Bit 1 */
-#define PWR_CR_LPRUN ((uint32_t)0x00004000) /*!< Low power run mode */
-
-/******************* Bit definition for PWR_CSR register ********************/
-#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
-#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
-#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
-#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
-#define PWR_CSR_VOSF ((uint32_t)0x00000010) /*!< Voltage Scaling select flag */
-#define PWR_CSR_REGLPF ((uint32_t)0x00000020) /*!< Regulator LP flag */
-
-#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
-#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
-#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
-
-/******************************************************************************/
-/* */
-/* Reset and Clock Control (RCC) */
-/* */
-/******************************************************************************/
-/******************** Bit definition for RCC_CR register ********************/
-#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
-#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
-
-#define RCC_CR_MSION ((uint32_t)0x00000100) /*!< Internal Multi Speed clock enable */
-#define RCC_CR_MSIRDY ((uint32_t)0x00000200) /*!< Internal Multi Speed clock ready flag */
-
-#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
-#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
-#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
-
-#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
-#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
-#define RCC_CR_CSSON ((uint32_t)0x10000000) /*!< Clock Security System enable */
-
-#define RCC_CR_RTCPRE ((uint32_t)0x60000000) /*!< RTC Prescaler */
-#define RCC_CR_RTCPRE_0 ((uint32_t)0x20000000) /*!< Bit0 */
-#define RCC_CR_RTCPRE_1 ((uint32_t)0x40000000) /*!< Bit1 */
-
-/******************** Bit definition for RCC_ICSCR register *****************/
-#define RCC_ICSCR_HSICAL ((uint32_t)0x000000FF) /*!< Internal High Speed clock Calibration */
-#define RCC_ICSCR_HSITRIM ((uint32_t)0x00001F00) /*!< Internal High Speed clock trimming */
-
-#define RCC_ICSCR_MSIRANGE ((uint32_t)0x0000E000) /*!< Internal Multi Speed clock Range */
-#define RCC_ICSCR_MSIRANGE_0 ((uint32_t)0x00000000) /*!< Internal Multi Speed clock Range 65.536 KHz */
-#define RCC_ICSCR_MSIRANGE_1 ((uint32_t)0x00002000) /*!< Internal Multi Speed clock Range 131.072 KHz */
-#define RCC_ICSCR_MSIRANGE_2 ((uint32_t)0x00004000) /*!< Internal Multi Speed clock Range 262.144 KHz */
-#define RCC_ICSCR_MSIRANGE_3 ((uint32_t)0x00006000) /*!< Internal Multi Speed clock Range 524.288 KHz */
-#define RCC_ICSCR_MSIRANGE_4 ((uint32_t)0x00008000) /*!< Internal Multi Speed clock Range 1.048 MHz */
-#define RCC_ICSCR_MSIRANGE_5 ((uint32_t)0x0000A000) /*!< Internal Multi Speed clock Range 2.097 MHz */
-#define RCC_ICSCR_MSIRANGE_6 ((uint32_t)0x0000C000) /*!< Internal Multi Speed clock Range 4.194 MHz */
-#define RCC_ICSCR_MSICAL ((uint32_t)0x00FF0000) /*!< Internal Multi Speed clock Calibration */
-#define RCC_ICSCR_MSITRIM ((uint32_t)0xFF000000) /*!< Internal Multi Speed clock trimming */
-
-/******************** Bit definition for RCC_CFGR register ******************/
-#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
-#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-
-/*!< SW configuration */
-#define RCC_CFGR_SW_MSI ((uint32_t)0x00000000) /*!< MSI selected as system clock */
-#define RCC_CFGR_SW_HSI ((uint32_t)0x00000001) /*!< HSI selected as system clock */
-#define RCC_CFGR_SW_HSE ((uint32_t)0x00000002) /*!< HSE selected as system clock */
-#define RCC_CFGR_SW_PLL ((uint32_t)0x00000003) /*!< PLL selected as system clock */
-
-#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
-#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
-#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
-
-/*!< SWS configuration */
-#define RCC_CFGR_SWS_MSI ((uint32_t)0x00000000) /*!< MSI oscillator used as system clock */
-#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000004) /*!< HSI oscillator used as system clock */
-#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000008) /*!< HSE oscillator used as system clock */
-#define RCC_CFGR_SWS_PLL ((uint32_t)0x0000000C) /*!< PLL used as system clock */
-
-#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
-#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
-#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
-#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
-#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
-
-/*!< HPRE configuration */
-#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
-#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
-#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
-#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
-#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
-#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
-#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
-#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
-#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
-
-#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */
-#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
-#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
-#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
-
-/*!< PPRE1 configuration */
-#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
-#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
-#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
-#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
-#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
-
-#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */
-#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */
-#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */
-#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */
-
-/*!< PPRE2 configuration */
-#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
-#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
-#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
-#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
-#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
-
-/*!< PLL entry clock source*/
-#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
-
-#define RCC_CFGR_PLLSRC_HSI ((uint32_t)0x00000000) /*!< HSI as PLL entry clock source */
-#define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE as PLL entry clock source */
-
-
-/*!< PLLMUL configuration */
-#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
-#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
-#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
-#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
-#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
-
-/*!< PLLMUL configuration */
-#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00000000) /*!< PLL input clock * 3 */
-#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00040000) /*!< PLL input clock * 4 */
-#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00080000) /*!< PLL input clock * 6 */
-#define RCC_CFGR_PLLMUL8 ((uint32_t)0x000C0000) /*!< PLL input clock * 8 */
-#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00100000) /*!< PLL input clock * 12 */
-#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00140000) /*!< PLL input clock * 16 */
-#define RCC_CFGR_PLLMUL24 ((uint32_t)0x00180000) /*!< PLL input clock * 24 */
-#define RCC_CFGR_PLLMUL32 ((uint32_t)0x001C0000) /*!< PLL input clock * 32 */
-#define RCC_CFGR_PLLMUL48 ((uint32_t)0x00200000) /*!< PLL input clock * 48 */
-
-/*!< PLLDIV configuration */
-#define RCC_CFGR_PLLDIV ((uint32_t)0x00C00000) /*!< PLLDIV[1:0] bits (PLL Output Division) */
-#define RCC_CFGR_PLLDIV_0 ((uint32_t)0x00400000) /*!< Bit0 */
-#define RCC_CFGR_PLLDIV_1 ((uint32_t)0x00800000) /*!< Bit1 */
-
-
-/*!< PLLDIV configuration */
-#define RCC_CFGR_PLLDIV1 ((uint32_t)0x00000000) /*!< PLL clock output = CKVCO / 1 */
-#define RCC_CFGR_PLLDIV2 ((uint32_t)0x00400000) /*!< PLL clock output = CKVCO / 2 */
-#define RCC_CFGR_PLLDIV3 ((uint32_t)0x00800000) /*!< PLL clock output = CKVCO / 3 */
-#define RCC_CFGR_PLLDIV4 ((uint32_t)0x00C00000) /*!< PLL clock output = CKVCO / 4 */
-
-
-#define RCC_CFGR_MCOSEL ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
-#define RCC_CFGR_MCOSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */
-#define RCC_CFGR_MCOSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */
-#define RCC_CFGR_MCOSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */
-
-/*!< MCO configuration */
-#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
-#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x01000000) /*!< System clock selected */
-#define RCC_CFGR_MCO_HSI ((uint32_t)0x02000000) /*!< Internal 16 MHz RC oscillator clock selected */
-#define RCC_CFGR_MCO_MSI ((uint32_t)0x03000000) /*!< Internal Medium Speed RC oscillator clock selected */
-#define RCC_CFGR_MCO_HSE ((uint32_t)0x04000000) /*!< External 1-25 MHz oscillator clock selected */
-#define RCC_CFGR_MCO_PLL ((uint32_t)0x05000000) /*!< PLL clock divided */
-#define RCC_CFGR_MCO_LSI ((uint32_t)0x06000000) /*!< LSI selected */
-#define RCC_CFGR_MCO_LSE ((uint32_t)0x07000000) /*!< LSE selected */
-
-#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCOPRE[2:0] bits (Microcontroller Clock Output Prescaler) */
-#define RCC_CFGR_MCOPRE_0 ((uint32_t)0x10000000) /*!< Bit 0 */
-#define RCC_CFGR_MCOPRE_1 ((uint32_t)0x20000000) /*!< Bit 1 */
-#define RCC_CFGR_MCOPRE_2 ((uint32_t)0x40000000) /*!< Bit 2 */
-
-/*!< MCO Prescaler configuration */
-#define RCC_CFGR_MCO_DIV1 ((uint32_t)0x00000000) /*!< MCO Clock divided by 1 */
-#define RCC_CFGR_MCO_DIV2 ((uint32_t)0x10000000) /*!< MCO Clock divided by 2 */
-#define RCC_CFGR_MCO_DIV4 ((uint32_t)0x20000000) /*!< MCO Clock divided by 4 */
-#define RCC_CFGR_MCO_DIV8 ((uint32_t)0x30000000) /*!< MCO Clock divided by 8 */
-#define RCC_CFGR_MCO_DIV16 ((uint32_t)0x40000000) /*!< MCO Clock divided by 16 */
-
-/*!<****************** Bit definition for RCC_CIR register ********************/
-#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
-#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
-#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
-#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
-#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
-#define RCC_CIR_MSIRDYF ((uint32_t)0x00000020) /*!< MSI Ready Interrupt flag */
-#define RCC_CIR_LSECSS ((uint32_t)0x00000040) /*!< LSE CSS Interrupt flag */
-#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
-
-#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
-#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
-#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
-#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
-#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
-#define RCC_CIR_MSIRDYIE ((uint32_t)0x00002000) /*!< MSI Ready Interrupt Enable */
-#define RCC_CIR_LSECSSIE ((uint32_t)0x00004000) /*!< LSE CSS Interrupt Enable */
-
-#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
-#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
-#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
-#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
-#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
-#define RCC_CIR_MSIRDYC ((uint32_t)0x00200000) /*!< MSI Ready Interrupt Clear */
-#define RCC_CIR_LSECSSC ((uint32_t)0x00400000) /*!< LSE CSS Interrupt Clear */
-#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
-
-/***************** Bit definition for RCC_AHBRSTR register ******************/
-#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00000001) /*!< GPIO port A reset */
-#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00000002) /*!< GPIO port B reset */
-#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00000004) /*!< GPIO port C reset */
-#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00000008) /*!< GPIO port D reset */
-#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00000010) /*!< GPIO port E reset */
-#define RCC_AHBRSTR_GPIOHRST ((uint32_t)0x00000020) /*!< GPIO port H reset */
-#define RCC_AHBRSTR_CRCRST ((uint32_t)0x00001000) /*!< CRC reset */
-#define RCC_AHBRSTR_FLITFRST ((uint32_t)0x00008000) /*!< FLITF reset */
-#define RCC_AHBRSTR_DMA1RST ((uint32_t)0x01000000) /*!< DMA1 reset */
-#define RCC_AHBRSTR_DMA2RST ((uint32_t)0x02000000) /*!< DMA2 reset */
-
-/***************** Bit definition for RCC_APB2RSTR register *****************/
-#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< System Configuration SYSCFG reset */
-#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00000004) /*!< TIM9 reset */
-#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00000008) /*!< TIM10 reset */
-#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00000010) /*!< TIM11 reset */
-#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC1 reset */
-#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */
-#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
-
-/***************** Bit definition for RCC_APB1RSTR register *****************/
-#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
-#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
-#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */
-#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */
-#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
-#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
-#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
-#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */
-#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */
-#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
-#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
-#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
-#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */
-#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB reset */
-#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */
-#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */
-#define RCC_APB1RSTR_COMPRST ((uint32_t)0x80000000) /*!< Comparator interface reset */
-
-/****************** Bit definition for RCC_AHBENR register ******************/
-#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00000001) /*!< GPIO port A clock enable */
-#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00000002) /*!< GPIO port B clock enable */
-#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00000004) /*!< GPIO port C clock enable */
-#define RCC_AHBENR_GPIODEN ((uint32_t)0x00000008) /*!< GPIO port D clock enable */
-#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00000010) /*!< GPIO port E clock enable */
-#define RCC_AHBENR_GPIOHEN ((uint32_t)0x00000020) /*!< GPIO port H clock enable */
-#define RCC_AHBENR_CRCEN ((uint32_t)0x00001000) /*!< CRC clock enable */
-#define RCC_AHBENR_FLITFEN ((uint32_t)0x00008000) /*!< FLITF clock enable (has effect only when
- the Flash memory is in power down mode) */
-#define RCC_AHBENR_DMA1EN ((uint32_t)0x01000000) /*!< DMA1 clock enable */
-#define RCC_AHBENR_DMA2EN ((uint32_t)0x02000000) /*!< DMA2 clock enable */
-
-/****************** Bit definition for RCC_APB2ENR register *****************/
-#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enable */
-#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00000004) /*!< TIM9 interface clock enable */
-#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00000008) /*!< TIM10 interface clock enable */
-#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enable */
-#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
-#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
-#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
-
-/***************** Bit definition for RCC_APB1ENR register ******************/
-#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/
-#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
-#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */
-#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */
-#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
-#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
-#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
-#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */
-#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */
-#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
-#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
-#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
-#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */
-#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
-#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */
-#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */
-#define RCC_APB1ENR_COMPEN ((uint32_t)0x80000000) /*!< Comparator interface clock enable */
-
-/****************** Bit definition for RCC_AHBLPENR register ****************/
-#define RCC_AHBLPENR_GPIOALPEN ((uint32_t)0x00000001) /*!< GPIO port A clock enabled in sleep mode */
-#define RCC_AHBLPENR_GPIOBLPEN ((uint32_t)0x00000002) /*!< GPIO port B clock enabled in sleep mode */
-#define RCC_AHBLPENR_GPIOCLPEN ((uint32_t)0x00000004) /*!< GPIO port C clock enabled in sleep mode */
-#define RCC_AHBLPENR_GPIODLPEN ((uint32_t)0x00000008) /*!< GPIO port D clock enabled in sleep mode */
-#define RCC_AHBLPENR_GPIOELPEN ((uint32_t)0x00000010) /*!< GPIO port E clock enabled in sleep mode */
-#define RCC_AHBLPENR_GPIOHLPEN ((uint32_t)0x00000020) /*!< GPIO port H clock enabled in sleep mode */
-#define RCC_AHBLPENR_CRCLPEN ((uint32_t)0x00001000) /*!< CRC clock enabled in sleep mode */
-#define RCC_AHBLPENR_FLITFLPEN ((uint32_t)0x00008000) /*!< Flash Interface clock enabled in sleep mode
- (has effect only when the Flash memory is
- in power down mode) */
-#define RCC_AHBLPENR_SRAMLPEN ((uint32_t)0x00010000) /*!< SRAM clock enabled in sleep mode */
-#define RCC_AHBLPENR_DMA1LPEN ((uint32_t)0x01000000) /*!< DMA1 clock enabled in sleep mode */
-#define RCC_AHBLPENR_DMA2LPEN ((uint32_t)0x02000000) /*!< DMA2 clock enabled in sleep mode */
-
-/****************** Bit definition for RCC_APB2LPENR register ***************/
-#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enabled in sleep mode */
-#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00000004) /*!< TIM9 interface clock enabled in sleep mode */
-#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00000008) /*!< TIM10 interface clock enabled in sleep mode */
-#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enabled in sleep mode */
-#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000200) /*!< ADC1 clock enabled in sleep mode */
-#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000) /*!< SPI1 clock enabled in sleep mode */
-#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00004000) /*!< USART1 clock enabled in sleep mode */
-
-/***************** Bit definition for RCC_APB1LPENR register ****************/
-#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled in sleep mode */
-#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002) /*!< Timer 3 clock enabled in sleep mode */
-#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004) /*!< Timer 4 clock enabled in sleep mode */
-#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008) /*!< Timer 5 clock enabled in sleep mode */
-#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010) /*!< Timer 6 clock enabled in sleep mode */
-#define RCC_APB1LPENR_TIM7LPEN ((uint32_t)0x00000020) /*!< Timer 7 clock enabled in sleep mode */
-#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enabled in sleep mode */
-#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000) /*!< SPI 2 clock enabled in sleep mode */
-#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000) /*!< SPI 3 clock enabled in sleep mode */
-#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000) /*!< USART 2 clock enabled in sleep mode */
-#define RCC_APB1LPENR_USART3LPEN ((uint32_t)0x00040000) /*!< USART 3 clock enabled in sleep mode */
-#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000) /*!< I2C 1 clock enabled in sleep mode */
-#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000) /*!< I2C 2 clock enabled in sleep mode */
-#define RCC_APB1LPENR_USBLPEN ((uint32_t)0x00800000) /*!< USB clock enabled in sleep mode */
-#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000) /*!< Power interface clock enabled in sleep mode */
-#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000) /*!< DAC interface clock enabled in sleep mode */
-#define RCC_APB1LPENR_COMPLPEN ((uint32_t)0x80000000) /*!< Comparator interface clock enabled in sleep mode*/
-
-/******************* Bit definition for RCC_CSR register ********************/
-#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
-#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
-
-#define RCC_CSR_LSEON ((uint32_t)0x00000100) /*!< External Low Speed oscillator enable */
-#define RCC_CSR_LSERDY ((uint32_t)0x00000200) /*!< External Low Speed oscillator Ready */
-#define RCC_CSR_LSEBYP ((uint32_t)0x00000400) /*!< External Low Speed oscillator Bypass */
-
-#define RCC_CSR_LSECSSON ((uint32_t)0x00000800) /*!< External Low Speed oscillator CSS Enable */
-#define RCC_CSR_LSECSSD ((uint32_t)0x00001000) /*!< External Low Speed oscillator CSS Detected */
-
-#define RCC_CSR_RTCSEL ((uint32_t)0x00030000) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
-#define RCC_CSR_RTCSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define RCC_CSR_RTCSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-
-/*!< RTC congiguration */
-#define RCC_CSR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
-#define RCC_CSR_RTCSEL_LSE ((uint32_t)0x00010000) /*!< LSE oscillator clock used as RTC clock */
-#define RCC_CSR_RTCSEL_LSI ((uint32_t)0x00020000) /*!< LSI oscillator clock used as RTC clock */
-#define RCC_CSR_RTCSEL_HSE ((uint32_t)0x00030000) /*!< HSE oscillator clock divided by 2, 4, 8 or 16 by RTCPRE used as RTC clock */
-
-#define RCC_CSR_RTCEN ((uint32_t)0x00400000) /*!< RTC clock enable */
-#define RCC_CSR_RTCRST ((uint32_t)0x00800000) /*!< RTC reset */
-
-#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
-#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< Option Bytes Loader reset flag */
-#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
-#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
-#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
-#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
-#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
-#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
-
-/******************************************************************************/
-/* */
-/* Real-Time Clock (RTC) */
-/* */
-/******************************************************************************/
-/******************** Bits definition for RTC_TR register *******************/
-#define RTC_TR_PM ((uint32_t)0x00400000)
-#define RTC_TR_HT ((uint32_t)0x00300000)
-#define RTC_TR_HT_0 ((uint32_t)0x00100000)
-#define RTC_TR_HT_1 ((uint32_t)0x00200000)
-#define RTC_TR_HU ((uint32_t)0x000F0000)
-#define RTC_TR_HU_0 ((uint32_t)0x00010000)
-#define RTC_TR_HU_1 ((uint32_t)0x00020000)
-#define RTC_TR_HU_2 ((uint32_t)0x00040000)
-#define RTC_TR_HU_3 ((uint32_t)0x00080000)
-#define RTC_TR_MNT ((uint32_t)0x00007000)
-#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
-#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
-#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
-#define RTC_TR_MNU ((uint32_t)0x00000F00)
-#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
-#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
-#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
-#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
-#define RTC_TR_ST ((uint32_t)0x00000070)
-#define RTC_TR_ST_0 ((uint32_t)0x00000010)
-#define RTC_TR_ST_1 ((uint32_t)0x00000020)
-#define RTC_TR_ST_2 ((uint32_t)0x00000040)
-#define RTC_TR_SU ((uint32_t)0x0000000F)
-#define RTC_TR_SU_0 ((uint32_t)0x00000001)
-#define RTC_TR_SU_1 ((uint32_t)0x00000002)
-#define RTC_TR_SU_2 ((uint32_t)0x00000004)
-#define RTC_TR_SU_3 ((uint32_t)0x00000008)
-
-/******************** Bits definition for RTC_DR register *******************/
-#define RTC_DR_YT ((uint32_t)0x00F00000)
-#define RTC_DR_YT_0 ((uint32_t)0x00100000)
-#define RTC_DR_YT_1 ((uint32_t)0x00200000)
-#define RTC_DR_YT_2 ((uint32_t)0x00400000)
-#define RTC_DR_YT_3 ((uint32_t)0x00800000)
-#define RTC_DR_YU ((uint32_t)0x000F0000)
-#define RTC_DR_YU_0 ((uint32_t)0x00010000)
-#define RTC_DR_YU_1 ((uint32_t)0x00020000)
-#define RTC_DR_YU_2 ((uint32_t)0x00040000)
-#define RTC_DR_YU_3 ((uint32_t)0x00080000)
-#define RTC_DR_WDU ((uint32_t)0x0000E000)
-#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
-#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
-#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
-#define RTC_DR_MT ((uint32_t)0x00001000)
-#define RTC_DR_MU ((uint32_t)0x00000F00)
-#define RTC_DR_MU_0 ((uint32_t)0x00000100)
-#define RTC_DR_MU_1 ((uint32_t)0x00000200)
-#define RTC_DR_MU_2 ((uint32_t)0x00000400)
-#define RTC_DR_MU_3 ((uint32_t)0x00000800)
-#define RTC_DR_DT ((uint32_t)0x00000030)
-#define RTC_DR_DT_0 ((uint32_t)0x00000010)
-#define RTC_DR_DT_1 ((uint32_t)0x00000020)
-#define RTC_DR_DU ((uint32_t)0x0000000F)
-#define RTC_DR_DU_0 ((uint32_t)0x00000001)
-#define RTC_DR_DU_1 ((uint32_t)0x00000002)
-#define RTC_DR_DU_2 ((uint32_t)0x00000004)
-#define RTC_DR_DU_3 ((uint32_t)0x00000008)
-
-/******************** Bits definition for RTC_CR register *******************/
-#define RTC_CR_COE ((uint32_t)0x00800000)
-#define RTC_CR_OSEL ((uint32_t)0x00600000)
-#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
-#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
-#define RTC_CR_POL ((uint32_t)0x00100000)
-#define RTC_CR_COSEL ((uint32_t)0x00080000)
-#define RTC_CR_BCK ((uint32_t)0x00040000)
-#define RTC_CR_SUB1H ((uint32_t)0x00020000)
-#define RTC_CR_ADD1H ((uint32_t)0x00010000)
-#define RTC_CR_TSIE ((uint32_t)0x00008000)
-#define RTC_CR_WUTIE ((uint32_t)0x00004000)
-#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
-#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
-#define RTC_CR_TSE ((uint32_t)0x00000800)
-#define RTC_CR_WUTE ((uint32_t)0x00000400)
-#define RTC_CR_ALRBE ((uint32_t)0x00000200)
-#define RTC_CR_ALRAE ((uint32_t)0x00000100)
-#define RTC_CR_DCE ((uint32_t)0x00000080)
-#define RTC_CR_FMT ((uint32_t)0x00000040)
-#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
-#define RTC_CR_REFCKON ((uint32_t)0x00000010)
-#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
-#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
-#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
-#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
-#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
-
-/******************** Bits definition for RTC_ISR register ******************/
-#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
-#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
-#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
-#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
-#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
-#define RTC_ISR_TSF ((uint32_t)0x00000800)
-#define RTC_ISR_WUTF ((uint32_t)0x00000400)
-#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
-#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
-#define RTC_ISR_INIT ((uint32_t)0x00000080)
-#define RTC_ISR_INITF ((uint32_t)0x00000040)
-#define RTC_ISR_RSF ((uint32_t)0x00000020)
-#define RTC_ISR_INITS ((uint32_t)0x00000010)
-#define RTC_ISR_SHPF ((uint32_t)0x00000008)
-#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
-#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
-#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
-
-/******************** Bits definition for RTC_PRER register *****************/
-#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
-#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
-
-/******************** Bits definition for RTC_WUTR register *****************/
-#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
-
-/******************** Bits definition for RTC_CALIBR register ***************/
-#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
-#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
-
-/******************** Bits definition for RTC_ALRMAR register ***************/
-#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
-#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
-#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
-#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
-#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
-#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
-#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
-#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
-#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
-#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
-#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
-#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
-#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
-#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
-#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
-#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
-#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
-#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
-#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
-#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
-#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
-#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
-#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
-#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
-#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
-#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
-#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
-#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
-#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
-#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
-#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
-#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
-#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
-#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
-#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
-#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
-#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
-#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
-#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
-#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
-
-/******************** Bits definition for RTC_ALRMBR register ***************/
-#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
-#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
-#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
-#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
-#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
-#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
-#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
-#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
-#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
-#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
-#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
-#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
-#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
-#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
-#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
-#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
-#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
-#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
-#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
-#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
-#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
-#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
-#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
-#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
-#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
-#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
-#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
-#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
-#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
-#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
-#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
-#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
-#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
-#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
-#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
-#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
-#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
-#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
-#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
-#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
-
-/******************** Bits definition for RTC_WPR register ******************/
-#define RTC_WPR_KEY ((uint32_t)0x000000FF)
-
-/******************** Bits definition for RTC_SSR register ******************/
-#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
-
-/******************** Bits definition for RTC_SHIFTR register ***************/
-#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
-#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
-
-/******************** Bits definition for RTC_TSTR register *****************/
-#define RTC_TSTR_PM ((uint32_t)0x00400000)
-#define RTC_TSTR_HT ((uint32_t)0x00300000)
-#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
-#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
-#define RTC_TSTR_HU ((uint32_t)0x000F0000)
-#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
-#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
-#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
-#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
-#define RTC_TSTR_MNT ((uint32_t)0x00007000)
-#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
-#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
-#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
-#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
-#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
-#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
-#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
-#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
-#define RTC_TSTR_ST ((uint32_t)0x00000070)
-#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
-#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
-#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
-#define RTC_TSTR_SU ((uint32_t)0x0000000F)
-#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
-#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
-#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
-#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
-
-/******************** Bits definition for RTC_TSDR register *****************/
-#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
-#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
-#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
-#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
-#define RTC_TSDR_MT ((uint32_t)0x00001000)
-#define RTC_TSDR_MU ((uint32_t)0x00000F00)
-#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
-#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
-#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
-#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
-#define RTC_TSDR_DT ((uint32_t)0x00000030)
-#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
-#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
-#define RTC_TSDR_DU ((uint32_t)0x0000000F)
-#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
-#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
-#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
-#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
-
-/******************** Bits definition for RTC_TSSSR register ****************/
-#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
-
-/******************** Bits definition for RTC_CAL register *****************/
-#define RTC_CALR_CALP ((uint32_t)0x00008000)
-#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
-#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
-#define RTC_CALR_CALM ((uint32_t)0x000001FF)
-#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
-#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
-#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
-#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
-#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
-#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
-#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
-#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
-#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
-
-/******************** Bits definition for RTC_TAFCR register ****************/
-#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
-#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
-#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
-#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
-#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
-#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
-#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
-#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
-#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
-#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
-#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
-#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
-#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
-#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
-#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
-#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
-#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
-#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
-#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
-#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
-
-/******************** Bits definition for RTC_ALRMASSR register *************/
-#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
-#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
-#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
-#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
-#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
-#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
-
-/******************** Bits definition for RTC_ALRMBSSR register *************/
-#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
-#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
-#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
-#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
-#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
-#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
-
-/******************** Bits definition for RTC_BKP0R register ****************/
-#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP1R register ****************/
-#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP2R register ****************/
-#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP3R register ****************/
-#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP4R register ****************/
-#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP5R register ****************/
-#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP6R register ****************/
-#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP7R register ****************/
-#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP8R register ****************/
-#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP9R register ****************/
-#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP10R register ***************/
-#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP11R register ***************/
-#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP12R register ***************/
-#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP13R register ***************/
-#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP14R register ***************/
-#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP15R register ***************/
-#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP16R register ***************/
-#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP17R register ***************/
-#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP18R register ***************/
-#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP19R register ***************/
-#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP20R register ***************/
-#define RTC_BKP20R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP21R register ***************/
-#define RTC_BKP21R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP22R register ***************/
-#define RTC_BKP22R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP23R register ***************/
-#define RTC_BKP23R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP24R register ***************/
-#define RTC_BKP24R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP25R register ***************/
-#define RTC_BKP25R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP26R register ***************/
-#define RTC_BKP26R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP27R register ***************/
-#define RTC_BKP27R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP28R register ***************/
-#define RTC_BKP28R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP29R register ***************/
-#define RTC_BKP29R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP30R register ***************/
-#define RTC_BKP30R ((uint32_t)0xFFFFFFFF)
-
-/******************** Bits definition for RTC_BKP31R register ***************/
-#define RTC_BKP31R ((uint32_t)0xFFFFFFFF)
-
-/******************** Number of backup registers ******************************/
-#define RTC_BKP_NUMBER 32
-
-/******************************************************************************/
-/* */
-/* Serial Peripheral Interface (SPI) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for SPI_CR1 register ********************/
-#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
-#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
-#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
-
-#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
-#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
-#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
-#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
-
-#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
-#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
-#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
-#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
-#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
-#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!< Data Frame Format */
-#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
-#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
-#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
-#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
-
-/******************* Bit definition for SPI_CR2 register ********************/
-#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
-#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
-#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
-#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame format */
-#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
-#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
-#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
-
-/******************** Bit definition for SPI_SR register ********************/
-#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
-#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
-#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
-#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
-#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
-#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
-#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
-#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
-#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */
-
-/******************** Bit definition for SPI_DR register ********************/
-#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!< Data Register */
-
-/******************* Bit definition for SPI_CRCPR register ******************/
-#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!< CRC polynomial register */
-
-/****************** Bit definition for SPI_RXCRCR register ******************/
-#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!< Rx CRC Register */
-
-/****************** Bit definition for SPI_TXCRCR register ******************/
-#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!< Tx CRC Register */
-
-/****************** Bit definition for SPI_I2SCFGR register *****************/
-#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
-
-#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
-#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
-#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
-
-#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
-
-#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
-#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
-
-#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
-#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-
-#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
-#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
-
-/****************** Bit definition for SPI_I2SPR register *******************/
-#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
-#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
-#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
-
-/******************************************************************************/
-/* */
-/* System Configuration (SYSCFG) */
-/* */
-/******************************************************************************/
-/***************** Bit definition for SYSCFG_MEMRMP register ****************/
-#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
-#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define SYSCFG_MEMRMP_BOOT_MODE ((uint32_t)0x00000300) /*!< Boot mode Config */
-#define SYSCFG_MEMRMP_BOOT_MODE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
-#define SYSCFG_MEMRMP_BOOT_MODE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
-
-/***************** Bit definition for SYSCFG_PMC register *******************/
-#define SYSCFG_PMC_USB_PU ((uint32_t)0x00000001) /*!< SYSCFG PMC */
-
-/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
-#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x0000000F) /*!< EXTI 0 configuration */
-#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x000000F0) /*!< EXTI 1 configuration */
-#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x00000F00) /*!< EXTI 2 configuration */
-#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0x0000F000) /*!< EXTI 3 configuration */
-
-/**
- * @brief EXTI0 configuration
- */
-#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x00000001) /*!< PB[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x00000002) /*!< PC[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x00000003) /*!< PD[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x00000004) /*!< PE[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x00000005) /*!< PH[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PF ((uint32_t)0x00000006) /*!< PF[0] pin */
-#define SYSCFG_EXTICR1_EXTI0_PG ((uint32_t)0x00000007) /*!< PG[0] pin */
-
-/**
- * @brief EXTI1 configuration
- */
-#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x00000010) /*!< PB[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x00000020) /*!< PC[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x00000030) /*!< PD[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x00000040) /*!< PE[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x00000050) /*!< PH[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PF ((uint32_t)0x00000060) /*!< PF[1] pin */
-#define SYSCFG_EXTICR1_EXTI1_PG ((uint32_t)0x00000070) /*!< PG[1] pin */
-
-/**
- * @brief EXTI2 configuration
- */
-#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x00000100) /*!< PB[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x00000200) /*!< PC[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x00000300) /*!< PD[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x00000400) /*!< PE[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x00000500) /*!< PH[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PF ((uint32_t)0x00000600) /*!< PF[2] pin */
-#define SYSCFG_EXTICR1_EXTI2_PG ((uint32_t)0x00000700) /*!< PG[2] pin */
-
-/**
- * @brief EXTI3 configuration
- */
-#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x00001000) /*!< PB[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x00002000) /*!< PC[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x00003000) /*!< PD[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x00004000) /*!< PE[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PF ((uint32_t)0x00003000) /*!< PF[3] pin */
-#define SYSCFG_EXTICR1_EXTI3_PG ((uint32_t)0x00004000) /*!< PG[3] pin */
-
-/***************** Bit definition for SYSCFG_EXTICR2 register *****************/
-#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x0000000F) /*!< EXTI 4 configuration */
-#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x000000F0) /*!< EXTI 5 configuration */
-#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x00000F00) /*!< EXTI 6 configuration */
-#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0x0000F000) /*!< EXTI 7 configuration */
-
-/**
- * @brief EXTI4 configuration
- */
-#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x00000001) /*!< PB[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x00000002) /*!< PC[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x00000003) /*!< PD[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x00000004) /*!< PE[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PF ((uint32_t)0x00000006) /*!< PF[4] pin */
-#define SYSCFG_EXTICR2_EXTI4_PG ((uint32_t)0x00000007) /*!< PG[4] pin */
-
-/**
- * @brief EXTI5 configuration
- */
-#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x00000010) /*!< PB[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x00000020) /*!< PC[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x00000030) /*!< PD[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x00000040) /*!< PE[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PF ((uint32_t)0x00000060) /*!< PF[5] pin */
-#define SYSCFG_EXTICR2_EXTI5_PG ((uint32_t)0x00000070) /*!< PG[5] pin */
-
-/**
- * @brief EXTI6 configuration
- */
-#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x00000100) /*!< PB[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x00000200) /*!< PC[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x00000300) /*!< PD[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x00000400) /*!< PE[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PF ((uint32_t)0x00000600) /*!< PF[6] pin */
-#define SYSCFG_EXTICR2_EXTI6_PG ((uint32_t)0x00000700) /*!< PG[6] pin */
-
-/**
- * @brief EXTI7 configuration
- */
-#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x00001000) /*!< PB[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x00002000) /*!< PC[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x00003000) /*!< PD[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x00004000) /*!< PE[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PF ((uint32_t)0x00006000) /*!< PF[7] pin */
-#define SYSCFG_EXTICR2_EXTI7_PG ((uint32_t)0x00007000) /*!< PG[7] pin */
-
-/***************** Bit definition for SYSCFG_EXTICR3 register *****************/
-#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x0000000F) /*!< EXTI 8 configuration */
-#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x000000F0) /*!< EXTI 9 configuration */
-#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x00000F00) /*!< EXTI 10 configuration */
-#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0x0000F000) /*!< EXTI 11 configuration */
-
-/**
- * @brief EXTI8 configuration
- */
-#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x00000001) /*!< PB[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x00000002) /*!< PC[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x00000003) /*!< PD[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x00000004) /*!< PE[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PF ((uint32_t)0x00000006) /*!< PF[8] pin */
-#define SYSCFG_EXTICR3_EXTI8_PG ((uint32_t)0x00000007) /*!< PG[8] pin */
-
-/**
- * @brief EXTI9 configuration
- */
-#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x00000010) /*!< PB[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x00000020) /*!< PC[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x00000030) /*!< PD[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x00000040) /*!< PE[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PF ((uint32_t)0x00000060) /*!< PF[9] pin */
-#define SYSCFG_EXTICR3_EXTI9_PG ((uint32_t)0x00000070) /*!< PG[9] pin */
-
-/**
- * @brief EXTI10 configuration
- */
-#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x00000100) /*!< PB[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x00000200) /*!< PC[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x00000300) /*!< PD[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x00000400) /*!< PE[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PF ((uint32_t)0x00000600) /*!< PF[10] pin */
-#define SYSCFG_EXTICR3_EXTI10_PG ((uint32_t)0x00000700) /*!< PG[10] pin */
-
-/**
- * @brief EXTI11 configuration
- */
-#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x00001000) /*!< PB[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x00002000) /*!< PC[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x00003000) /*!< PD[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x00004000) /*!< PE[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PF ((uint32_t)0x00006000) /*!< PF[11] pin */
-#define SYSCFG_EXTICR3_EXTI11_PG ((uint32_t)0x00007000) /*!< PG[11] pin */
-
-/***************** Bit definition for SYSCFG_EXTICR4 register *****************/
-#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x0000000F) /*!< EXTI 12 configuration */
-#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x000000F0) /*!< EXTI 13 configuration */
-#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x00000F00) /*!< EXTI 14 configuration */
-#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0x0000F000) /*!< EXTI 15 configuration */
-
-/**
- * @brief EXTI12 configuration
- */
-#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x00000001) /*!< PB[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x00000002) /*!< PC[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x00000003) /*!< PD[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x00000004) /*!< PE[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PF ((uint32_t)0x00000006) /*!< PF[12] pin */
-#define SYSCFG_EXTICR4_EXTI12_PG ((uint32_t)0x00000007) /*!< PG[12] pin */
-
-/**
- * @brief EXTI13 configuration
- */
-#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x00000010) /*!< PB[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x00000020) /*!< PC[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x00000030) /*!< PD[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x00000040) /*!< PE[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PF ((uint32_t)0x00000060) /*!< PF[13] pin */
-#define SYSCFG_EXTICR4_EXTI13_PG ((uint32_t)0x00000070) /*!< PG[13] pin */
-
-/**
- * @brief EXTI14 configuration
- */
-#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x00000100) /*!< PB[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x00000200) /*!< PC[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x00000300) /*!< PD[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x00000400) /*!< PE[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PF ((uint32_t)0x00000600) /*!< PF[14] pin */
-#define SYSCFG_EXTICR4_EXTI14_PG ((uint32_t)0x00000700) /*!< PG[14] pin */
-
-/**
- * @brief EXTI15 configuration
- */
-#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x00001000) /*!< PB[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x00002000) /*!< PC[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x00003000) /*!< PD[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x00004000) /*!< PE[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PF ((uint32_t)0x00006000) /*!< PF[15] pin */
-#define SYSCFG_EXTICR4_EXTI15_PG ((uint32_t)0x00007000) /*!< PG[15] pin */
-
-/******************************************************************************/
-/* */
-/* Routing Interface (RI) */
-/* */
-/******************************************************************************/
-
-/******************** Bit definition for RI_ICR register ********************/
-#define RI_ICR_IC1OS ((uint32_t)0x0000000F) /*!< IC1OS[3:0] bits (Input Capture 1 select bits) */
-#define RI_ICR_IC1OS_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_ICR_IC1OS_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_ICR_IC1OS_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_ICR_IC1OS_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-
-#define RI_ICR_IC2OS ((uint32_t)0x000000F0) /*!< IC2OS[3:0] bits (Input Capture 2 select bits) */
-#define RI_ICR_IC2OS_0 ((uint32_t)0x00000010) /*!< Bit 0 */
-#define RI_ICR_IC2OS_1 ((uint32_t)0x00000020) /*!< Bit 1 */
-#define RI_ICR_IC2OS_2 ((uint32_t)0x00000040) /*!< Bit 2 */
-#define RI_ICR_IC2OS_3 ((uint32_t)0x00000080) /*!< Bit 3 */
-
-#define RI_ICR_IC3OS ((uint32_t)0x00000F00) /*!< IC3OS[3:0] bits (Input Capture 3 select bits) */
-#define RI_ICR_IC3OS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
-#define RI_ICR_IC3OS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
-#define RI_ICR_IC3OS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
-#define RI_ICR_IC3OS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
-
-#define RI_ICR_IC4OS ((uint32_t)0x0000F000) /*!< IC4OS[3:0] bits (Input Capture 4 select bits) */
-#define RI_ICR_IC4OS_0 ((uint32_t)0x00001000) /*!< Bit 0 */
-#define RI_ICR_IC4OS_1 ((uint32_t)0x00002000) /*!< Bit 1 */
-#define RI_ICR_IC4OS_2 ((uint32_t)0x00004000) /*!< Bit 2 */
-#define RI_ICR_IC4OS_3 ((uint32_t)0x00008000) /*!< Bit 3 */
-
-#define RI_ICR_TIM ((uint32_t)0x00030000) /*!< TIM[3:0] bits (Timers select bits) */
-#define RI_ICR_TIM_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define RI_ICR_TIM_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-
-#define RI_ICR_IC1 ((uint32_t)0x00040000) /*!< Input capture 1 */
-#define RI_ICR_IC2 ((uint32_t)0x00080000) /*!< Input capture 2 */
-#define RI_ICR_IC3 ((uint32_t)0x00100000) /*!< Input capture 3 */
-#define RI_ICR_IC4 ((uint32_t)0x00200000) /*!< Input capture 4 */
-
-/******************** Bit definition for RI_ASCR1 register ********************/
-#define RI_ASCR1_CH ((uint32_t)0x7BFDFFFF) /*!< AS_CH[25:18] & AS_CH[15:0] bits ( Analog switches selection bits) */
-#define RI_ASCR1_CH_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_ASCR1_CH_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_ASCR1_CH_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_ASCR1_CH_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_ASCR1_CH_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_ASCR1_CH_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_ASCR1_CH_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_ASCR1_CH_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_ASCR1_CH_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_ASCR1_CH_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_ASCR1_CH_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_ASCR1_CH_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_ASCR1_CH_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_ASCR1_CH_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_ASCR1_CH_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_ASCR1_CH_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-#define RI_ASCR1_CH_31 ((uint32_t)0x00010000) /*!< Bit 16 */
-#define RI_ASCR1_CH_18 ((uint32_t)0x00040000) /*!< Bit 18 */
-#define RI_ASCR1_CH_19 ((uint32_t)0x00080000) /*!< Bit 19 */
-#define RI_ASCR1_CH_20 ((uint32_t)0x00100000) /*!< Bit 20 */
-#define RI_ASCR1_CH_21 ((uint32_t)0x00200000) /*!< Bit 21 */
-#define RI_ASCR1_CH_22 ((uint32_t)0x00400000) /*!< Bit 22 */
-#define RI_ASCR1_CH_23 ((uint32_t)0x00800000) /*!< Bit 23 */
-#define RI_ASCR1_CH_24 ((uint32_t)0x01000000) /*!< Bit 24 */
-#define RI_ASCR1_CH_25 ((uint32_t)0x02000000) /*!< Bit 25 */
-#define RI_ASCR1_VCOMP ((uint32_t)0x04000000) /*!< ADC analog switch selection for internal node to COMP1 */
-#define RI_ASCR1_CH_27 ((uint32_t)0x00400000) /*!< Bit 27 */
-#define RI_ASCR1_CH_28 ((uint32_t)0x00800000) /*!< Bit 28 */
-#define RI_ASCR1_CH_29 ((uint32_t)0x01000000) /*!< Bit 29 */
-#define RI_ASCR1_CH_30 ((uint32_t)0x02000000) /*!< Bit 30 */
-#define RI_ASCR1_SCM ((uint32_t)0x80000000) /*!< I/O Switch control mode */
-
-/******************** Bit definition for RI_ASCR2 register ********************/
-#define RI_ASCR2_GR10_1 ((uint32_t)0x00000001) /*!< GR10-1 selection bit */
-#define RI_ASCR2_GR10_2 ((uint32_t)0x00000002) /*!< GR10-2 selection bit */
-#define RI_ASCR2_GR10_3 ((uint32_t)0x00000004) /*!< GR10-3 selection bit */
-#define RI_ASCR2_GR10_4 ((uint32_t)0x00000008) /*!< GR10-4 selection bit */
-#define RI_ASCR2_GR6_1 ((uint32_t)0x00000010) /*!< GR6-1 selection bit */
-#define RI_ASCR2_GR6_2 ((uint32_t)0x00000020) /*!< GR6-2 selection bit */
-#define RI_ASCR2_GR5_1 ((uint32_t)0x00000040) /*!< GR5-1 selection bit */
-#define RI_ASCR2_GR5_2 ((uint32_t)0x00000080) /*!< GR5-2 selection bit */
-#define RI_ASCR2_GR5_3 ((uint32_t)0x00000100) /*!< GR5-3 selection bit */
-#define RI_ASCR2_GR4_1 ((uint32_t)0x00000200) /*!< GR4-1 selection bit */
-#define RI_ASCR2_GR4_2 ((uint32_t)0x00000400) /*!< GR4-2 selection bit */
-#define RI_ASCR2_GR4_3 ((uint32_t)0x00000800) /*!< GR4-3 selection bit */
-#define RI_ASCR2_GR4_4 ((uint32_t)0x00008000) /*!< GR4-4 selection bit */
-#define RI_ASCR2_CH0b ((uint32_t)0x00010000) /*!< CH0b selection bit */
-#define RI_ASCR2_GR6_3 ((uint32_t)0x08000000) /*!< GR6-3 selection bit */
-#define RI_ASCR2_GR6_4 ((uint32_t)0x10000000) /*!< GR6-4 selection bit */
-
-/******************** Bit definition for RI_HYSCR1 register ********************/
-#define RI_HYSCR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A Hysteresis selection */
-#define RI_HYSCR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_HYSCR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_HYSCR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_HYSCR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_HYSCR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_HYSCR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_HYSCR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_HYSCR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_HYSCR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_HYSCR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_HYSCR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_HYSCR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_HYSCR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_HYSCR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_HYSCR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_HYSCR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-#define RI_HYSCR1_PB ((uint32_t)0xFFFF0000) /*!< PB[15:0] Port B Hysteresis selection */
-#define RI_HYSCR1_PB_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define RI_HYSCR1_PB_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-#define RI_HYSCR1_PB_2 ((uint32_t)0x00040000) /*!< Bit 2 */
-#define RI_HYSCR1_PB_3 ((uint32_t)0x00080000) /*!< Bit 3 */
-#define RI_HYSCR1_PB_4 ((uint32_t)0x00100000) /*!< Bit 4 */
-#define RI_HYSCR1_PB_5 ((uint32_t)0x00200000) /*!< Bit 5 */
-#define RI_HYSCR1_PB_6 ((uint32_t)0x00400000) /*!< Bit 6 */
-#define RI_HYSCR1_PB_7 ((uint32_t)0x00800000) /*!< Bit 7 */
-#define RI_HYSCR1_PB_8 ((uint32_t)0x01000000) /*!< Bit 8 */
-#define RI_HYSCR1_PB_9 ((uint32_t)0x02000000) /*!< Bit 9 */
-#define RI_HYSCR1_PB_10 ((uint32_t)0x04000000) /*!< Bit 10 */
-#define RI_HYSCR1_PB_11 ((uint32_t)0x08000000) /*!< Bit 11 */
-#define RI_HYSCR1_PB_12 ((uint32_t)0x10000000) /*!< Bit 12 */
-#define RI_HYSCR1_PB_13 ((uint32_t)0x20000000) /*!< Bit 13 */
-#define RI_HYSCR1_PB_14 ((uint32_t)0x40000000) /*!< Bit 14 */
-#define RI_HYSCR1_PB_15 ((uint32_t)0x80000000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_HYSCR2 register ********************/
-#define RI_HYSCR2_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C Hysteresis selection */
-#define RI_HYSCR2_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_HYSCR2_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_HYSCR2_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_HYSCR2_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_HYSCR2_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_HYSCR2_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_HYSCR2_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_HYSCR2_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_HYSCR2_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_HYSCR2_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_HYSCR2_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_HYSCR2_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_HYSCR2_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_HYSCR2_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_HYSCR2_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_HYSCR2_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-#define RI_HYSCR2_PD ((uint32_t)0xFFFF0000) /*!< PD[15:0] Port D Hysteresis selection */
-#define RI_HYSCR2_PD_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define RI_HYSCR2_PD_1 ((uint32_t)0x00020000) /*!< Bit 1 */
-#define RI_HYSCR2_PD_2 ((uint32_t)0x00040000) /*!< Bit 2 */
-#define RI_HYSCR2_PD_3 ((uint32_t)0x00080000) /*!< Bit 3 */
-#define RI_HYSCR2_PD_4 ((uint32_t)0x00100000) /*!< Bit 4 */
-#define RI_HYSCR2_PD_5 ((uint32_t)0x00200000) /*!< Bit 5 */
-#define RI_HYSCR2_PD_6 ((uint32_t)0x00400000) /*!< Bit 6 */
-#define RI_HYSCR2_PD_7 ((uint32_t)0x00800000) /*!< Bit 7 */
-#define RI_HYSCR2_PD_8 ((uint32_t)0x01000000) /*!< Bit 8 */
-#define RI_HYSCR2_PD_9 ((uint32_t)0x02000000) /*!< Bit 9 */
-#define RI_HYSCR2_PD_10 ((uint32_t)0x04000000) /*!< Bit 10 */
-#define RI_HYSCR2_PD_11 ((uint32_t)0x08000000) /*!< Bit 11 */
-#define RI_HYSCR2_PD_12 ((uint32_t)0x10000000) /*!< Bit 12 */
-#define RI_HYSCR2_PD_13 ((uint32_t)0x20000000) /*!< Bit 13 */
-#define RI_HYSCR2_PD_14 ((uint32_t)0x40000000) /*!< Bit 14 */
-#define RI_HYSCR2_PD_15 ((uint32_t)0x80000000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_HYSCR3 register ********************/
-#define RI_HYSCR3_PE ((uint32_t)0x0000FFFF) /*!< PE[15:0] Port E Hysteresis selection */
-#define RI_HYSCR3_PE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_HYSCR3_PE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_HYSCR3_PE_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_HYSCR3_PE_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_HYSCR3_PE_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_HYSCR3_PE_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_HYSCR3_PE_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_HYSCR3_PE_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_HYSCR3_PE_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_HYSCR3_PE_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_HYSCR3_PE_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_HYSCR3_PE_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_HYSCR3_PE_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_HYSCR3_PE_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_HYSCR3_PE_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_HYSCR3_PE_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_ASMR1 register ********************/
-#define RI_ASMR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/
-#define RI_ASMR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_ASMR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_ASMR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_ASMR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_ASMR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_ASMR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_ASMR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_ASMR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_ASMR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_ASMR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_ASMR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_ASMR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_ASMR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_ASMR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_ASMR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_ASMR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_CMR1 register ********************/
-#define RI_CMR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/
-#define RI_CMR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_CMR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_CMR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_CMR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_CMR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_CMR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_CMR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_CMR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_CMR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_CMR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_CMR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_CMR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_CMR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_CMR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_CMR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_CMR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_CICR1 register ********************/
-#define RI_CICR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/
-#define RI_CICR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_CICR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_CICR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_CICR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_CICR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_CICR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_CICR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_CICR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_CICR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_CICR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_CICR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_CICR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_CICR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_CICR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_CICR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_CICR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_ASMR2 register ********************/
-#define RI_ASMR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */
-#define RI_ASMR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_ASMR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_ASMR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_ASMR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_ASMR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_ASMR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_ASMR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_ASMR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_ASMR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_ASMR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_ASMR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_ASMR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_ASMR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_ASMR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_ASMR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_ASMR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_CMR2 register ********************/
-#define RI_CMR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */
-#define RI_CMR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_CMR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_CMR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_CMR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_CMR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_CMR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_CMR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_CMR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_CMR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_CMR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_CMR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_CMR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_CMR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_CMR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_CMR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_CMR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_CICR2 register ********************/
-#define RI_CICR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */
-#define RI_CICR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_CICR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_CICR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_CICR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_CICR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_CICR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_CICR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_CICR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_CICR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_CICR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_CICR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_CICR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_CICR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_CICR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_CICR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_CICR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_ASMR3 register ********************/
-#define RI_ASMR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */
-#define RI_ASMR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_ASMR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_ASMR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_ASMR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_ASMR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_ASMR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_ASMR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_ASMR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_ASMR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_ASMR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_ASMR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_ASMR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_ASMR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_ASMR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_ASMR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_ASMR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_CMR3 register ********************/
-#define RI_CMR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */
-#define RI_CMR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_CMR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_CMR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_CMR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_CMR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_CMR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_CMR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_CMR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_CMR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_CMR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_CMR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_CMR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_CMR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_CMR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_CMR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_CMR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************** Bit definition for RI_CICR3 register ********************/
-#define RI_CICR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */
-#define RI_CICR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define RI_CICR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define RI_CICR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define RI_CICR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define RI_CICR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define RI_CICR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define RI_CICR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define RI_CICR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-#define RI_CICR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
-#define RI_CICR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
-#define RI_CICR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
-#define RI_CICR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
-#define RI_CICR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
-#define RI_CICR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
-#define RI_CICR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
-#define RI_CICR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
-
-/******************************************************************************/
-/* */
-/* Timers (TIM) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for TIM_CR1 register ********************/
-#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
-#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
-#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
-#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
-#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
-
-#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
-#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
-#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
-
-#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
-
-#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
-#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-
-/******************* Bit definition for TIM_CR2 register ********************/
-#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
-
-#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
-#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
-
-#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
-
-/******************* Bit definition for TIM_SMCR register *******************/
-#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
-#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
-#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
-#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
-
-#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
-
-#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
-#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
-
-#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
-
-#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
-#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
-#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
-
-#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
-#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
-#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
-
-/******************* Bit definition for TIM_DIER register *******************/
-#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
-#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
-#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
-#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
-#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
-#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
-#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
-#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
-#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
-#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
-#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
-#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */
-#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
-
-/******************** Bit definition for TIM_SR register ********************/
-#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
-#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
-#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
-#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
-#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
-#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
-#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
-#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
-#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
-#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
-
-/******************* Bit definition for TIM_EGR register ********************/
-#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
-#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
-#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
-#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
-#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
-#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
-
-/****************** Bit definition for TIM_CCMR1 register *******************/
-#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
-#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
-#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
-
-#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
-#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
-
-#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
-#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
-
-#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
-
-#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
-#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-
-#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
-#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
-
-#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
-#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
-
-#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
-
-/*----------------------------------------------------------------------------*/
-
-#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
-#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
-#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
-
-#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
-#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
-#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
-
-#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
-#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
-#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
-
-#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
-#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
-#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
-
-/****************** Bit definition for TIM_CCMR2 register *******************/
-#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
-#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
-#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
-
-#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
-#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
-
-#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
-#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
-
-#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
-
-#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
-#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-
-#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
-#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
-
-#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
-#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
-
-#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
-
-/*----------------------------------------------------------------------------*/
-
-#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
-#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
-#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
-
-#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
-#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
-#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
-
-#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
-#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
-#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
-
-#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
-#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
-#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
-
-/******************* Bit definition for TIM_CCER register *******************/
-#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
-#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
-#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
-#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
-#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
-#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
-#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
-#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
-#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
-#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
-#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
-#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
-
-/******************* Bit definition for TIM_CNT register ********************/
-#define TIM_CNT_CNT ((uint32_t)0x0000FFFF) /*!<Counter Value */
-
-/******************* Bit definition for TIM_PSC register ********************/
-#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
-
-/******************* Bit definition for TIM_ARR register ********************/
-#define TIM_ARR_ARR ((uint32_t)0x0000FFFF) /*!<actual auto-reload Value */
-
-/******************* Bit definition for TIM_CCR1 register *******************/
-#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
-
-/******************* Bit definition for TIM_CCR2 register *******************/
-#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
-
-/******************* Bit definition for TIM_CCR3 register *******************/
-#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
-
-/******************* Bit definition for TIM_CCR4 register *******************/
-#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
-
-/******************* Bit definition for TIM_DCR register ********************/
-#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
-#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
-#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
-#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
-#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
-#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
-
-#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
-#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
-#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
-#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
-#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
-#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
-
-/******************* Bit definition for TIM_DMAR register *******************/
-#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
-
-/******************* Bit definition for TIM_OR register *********************/
-#define TIM_OR_TI1RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM Input 1 remap) */
-#define TIM_OR_TI1RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
-#define TIM_OR_TI1RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
-
-#define TIM_OR_ETR_RMP ((uint32_t)0x00000004) /*!<ETR_RMP bit (TIM10/11 ETR remap)*/
-#define TIM_OR_TI1_RMP_RI ((uint32_t)0x00000008) /*!<TI1_RMP_RI bit (TIM10/11 Input 1 remap for Routing interface) */
-
-/*----------------------------------------------------------------------------*/
-#define TIM9_OR_ITR1_RMP ((uint32_t)0x00000004) /*!<ITR1_RMP bit (TIM9 Internal trigger 1 remap) */
-
-/*----------------------------------------------------------------------------*/
-#define TIM2_OR_ITR1_RMP ((uint32_t)0x00000001) /*!<ITR1_RMP bit (TIM2 Internal trigger 1 remap) */
-
-/*----------------------------------------------------------------------------*/
-#define TIM3_OR_ITR2_RMP ((uint32_t)0x00000001) /*!<ITR2_RMP bit (TIM3 Internal trigger 2 remap) */
-
-/*----------------------------------------------------------------------------*/
-
-
-/******************************************************************************/
-/* */
-/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for USART_SR register *******************/
-#define USART_SR_PE ((uint32_t)0x00000001) /*!< Parity Error */
-#define USART_SR_FE ((uint32_t)0x00000002) /*!< Framing Error */
-#define USART_SR_NE ((uint32_t)0x00000004) /*!< Noise Error Flag */
-#define USART_SR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
-#define USART_SR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
-#define USART_SR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
-#define USART_SR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
-#define USART_SR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
-#define USART_SR_LBD ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
-#define USART_SR_CTS ((uint32_t)0x00000200) /*!< CTS Flag */
-
-/******************* Bit definition for USART_DR register *******************/
-#define USART_DR_DR ((uint32_t)0x000001FF) /*!< Data value */
-
-/****************** Bit definition for USART_BRR register *******************/
-#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
-#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
-
-/****************** Bit definition for USART_CR1 register *******************/
-#define USART_CR1_SBK ((uint32_t)0x00000001) /*!< Send Break */
-#define USART_CR1_RWU ((uint32_t)0x00000002) /*!< Receiver wakeup */
-#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
-#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
-#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
-#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
-#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
-#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< PE Interrupt Enable */
-#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
-#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
-#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
-#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Wakeup method */
-#define USART_CR1_M ((uint32_t)0x00001000) /*!< Word length */
-#define USART_CR1_UE ((uint32_t)0x00002000) /*!< USART Enable */
-#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit mode */
-
-/****************** Bit definition for USART_CR2 register *******************/
-#define USART_CR2_ADD ((uint32_t)0x0000000F) /*!< Address of the USART node */
-#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
-#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
-#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
-#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
-#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
-#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
-
-#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
-#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
-#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
-
-#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
-
-/****************** Bit definition for USART_CR3 register *******************/
-#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
-#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
-#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
-#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
-#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< Smartcard NACK enable */
-#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Smartcard mode enable */
-#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
-#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
-#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
-#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
-#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
-#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
-
-/****************** Bit definition for USART_GTPR register ******************/
-#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
-#define USART_GTPR_PSC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define USART_GTPR_PSC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define USART_GTPR_PSC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define USART_GTPR_PSC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define USART_GTPR_PSC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define USART_GTPR_PSC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define USART_GTPR_PSC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
-#define USART_GTPR_PSC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
-
-#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< Guard time value */
-
-/******************************************************************************/
-/* */
-/* Universal Serial Bus (USB) */
-/* */
-/******************************************************************************/
-
-/*!<Endpoint-specific registers */
-
-#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
-#define USB_EP1R (USB_BASE + 0x00000004) /*!< endpoint 1 register address */
-#define USB_EP2R (USB_BASE + 0x00000008) /*!< endpoint 2 register address */
-#define USB_EP3R (USB_BASE + 0x0000000C) /*!< endpoint 3 register address */
-#define USB_EP4R (USB_BASE + 0x00000010) /*!< endpoint 4 register address */
-#define USB_EP5R (USB_BASE + 0x00000014) /*!< endpoint 5 register address */
-#define USB_EP6R (USB_BASE + 0x00000018) /*!< endpoint 6 register address */
-#define USB_EP7R (USB_BASE + 0x0000001C) /*!< endpoint 7 register address */
-
-/* bit positions */
-#define USB_EP_CTR_RX ((uint32_t)0x00008000) /*!< EndPoint Correct TRansfer RX */
-#define USB_EP_DTOG_RX ((uint32_t)0x00004000) /*!< EndPoint Data TOGGLE RX */
-#define USB_EPRX_STAT ((uint32_t)0x00003000) /*!< EndPoint RX STATus bit field */
-#define USB_EP_SETUP ((uint32_t)0x00000800) /*!< EndPoint SETUP */
-#define USB_EP_T_FIELD ((uint32_t)0x00000600) /*!< EndPoint TYPE */
-#define USB_EP_KIND ((uint32_t)0x00000100) /*!< EndPoint KIND */
-#define USB_EP_CTR_TX ((uint32_t)0x00000080) /*!< EndPoint Correct TRansfer TX */
-#define USB_EP_DTOG_TX ((uint32_t)0x00000040) /*!< EndPoint Data TOGGLE TX */
-#define USB_EPTX_STAT ((uint32_t)0x00000030) /*!< EndPoint TX STATus bit field */
-#define USB_EPADDR_FIELD ((uint32_t)0x0000000F) /*!< EndPoint ADDRess FIELD */
-
-/* EndPoint REGister MASK (no toggle fields) */
-#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
- /*!< EP_TYPE[1:0] EndPoint TYPE */
-#define USB_EP_TYPE_MASK ((uint32_t)0x00000600) /*!< EndPoint TYPE Mask */
-#define USB_EP_BULK ((uint32_t)0x00000000) /*!< EndPoint BULK */
-#define USB_EP_CONTROL ((uint32_t)0x00000200) /*!< EndPoint CONTROL */
-#define USB_EP_ISOCHRONOUS ((uint32_t)0x00000400) /*!< EndPoint ISOCHRONOUS */
-#define USB_EP_INTERRUPT ((uint32_t)0x00000600) /*!< EndPoint INTERRUPT */
-#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
-
-#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
- /*!< STAT_TX[1:0] STATus for TX transfer */
-#define USB_EP_TX_DIS ((uint32_t)0x00000000) /*!< EndPoint TX DISabled */
-#define USB_EP_TX_STALL ((uint32_t)0x00000010) /*!< EndPoint TX STALLed */
-#define USB_EP_TX_NAK ((uint32_t)0x00000020) /*!< EndPoint TX NAKed */
-#define USB_EP_TX_VALID ((uint32_t)0x00000030) /*!< EndPoint TX VALID */
-#define USB_EPTX_DTOG1 ((uint32_t)0x00000010) /*!< EndPoint TX Data TOGgle bit1 */
-#define USB_EPTX_DTOG2 ((uint32_t)0x00000020) /*!< EndPoint TX Data TOGgle bit2 */
-#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
- /*!< STAT_RX[1:0] STATus for RX transfer */
-#define USB_EP_RX_DIS ((uint32_t)0x00000000) /*!< EndPoint RX DISabled */
-#define USB_EP_RX_STALL ((uint32_t)0x00001000) /*!< EndPoint RX STALLed */
-#define USB_EP_RX_NAK ((uint32_t)0x00002000) /*!< EndPoint RX NAKed */
-#define USB_EP_RX_VALID ((uint32_t)0x00003000) /*!< EndPoint RX VALID */
-#define USB_EPRX_DTOG1 ((uint32_t)0x00001000) /*!< EndPoint RX Data TOGgle bit1 */
-#define USB_EPRX_DTOG2 ((uint32_t)0x00002000) /*!< EndPoint RX Data TOGgle bit1 */
-#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
-
-/******************* Bit definition for USB_EP0R register *******************/
-#define USB_EP0R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP0R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP0R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP0R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP0R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP0R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP0R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP0R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP0R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP0R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP0R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP0R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP0R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP0R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP0R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP0R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP1R register *******************/
-#define USB_EP1R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP1R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP1R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP1R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP1R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP1R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP1R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP1R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP1R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP1R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP1R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP1R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP1R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP1R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP1R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP1R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP2R register *******************/
-#define USB_EP2R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP2R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP2R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP2R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP2R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP2R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP2R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP2R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP2R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP2R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP2R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP2R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP2R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP2R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP2R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP2R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP3R register *******************/
-#define USB_EP3R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP3R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP3R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP3R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP3R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP3R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP3R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP3R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP3R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP3R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP3R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP3R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP3R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP3R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP3R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP3R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP4R register *******************/
-#define USB_EP4R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP4R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP4R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP4R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP4R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP4R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP4R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP4R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP4R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP4R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP4R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP4R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP4R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP4R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP4R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP4R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP5R register *******************/
-#define USB_EP5R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP5R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP5R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP5R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP5R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP5R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP5R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP5R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP5R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP5R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP5R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP5R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP5R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP5R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP5R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP5R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP6R register *******************/
-#define USB_EP6R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP6R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP6R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP6R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP6R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP6R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP6R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP6R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP6R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP6R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP6R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP6R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP6R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP6R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP6R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP6R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP7R register *******************/
-#define USB_EP7R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
-
-#define USB_EP7R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP7R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
-#define USB_EP7R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
-
-#define USB_EP7R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
-#define USB_EP7R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
-#define USB_EP7R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
-
-#define USB_EP7R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP7R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
-#define USB_EP7R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
-
-#define USB_EP7R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
-
-#define USB_EP7R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP7R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
-#define USB_EP7R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
-
-#define USB_EP7R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
-#define USB_EP7R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
-
-/*!<Common registers */
-
-#define USB_CNTR (USB_BASE + 0x00000040) /*!< Control register */
-#define USB_ISTR (USB_BASE + 0x00000044) /*!< Interrupt status register */
-#define USB_FNR (USB_BASE + 0x00000048) /*!< Frame number register */
-#define USB_DADDR (USB_BASE + 0x0000004C) /*!< Device address register */
-#define USB_BTABLE (USB_BASE + 0x00000050) /*!< Buffer Table address register */
-
-
-
-/******************* Bit definition for USB_CNTR register *******************/
-#define USB_CNTR_FRES ((uint32_t)0x00000001) /*!<Force USB Reset */
-#define USB_CNTR_PDWN ((uint32_t)0x00000002) /*!<Power down */
-#define USB_CNTR_LP_MODE ((uint32_t)0x00000004) /*!<Low-power mode */
-#define USB_CNTR_FSUSP ((uint32_t)0x00000008) /*!<Force suspend */
-#define USB_CNTR_RESUME ((uint32_t)0x00000010) /*!<Resume request */
-#define USB_CNTR_ESOFM ((uint32_t)0x00000100) /*!<Expected Start Of Frame Interrupt Mask */
-#define USB_CNTR_SOFM ((uint32_t)0x00000200) /*!<Start Of Frame Interrupt Mask */
-#define USB_CNTR_RESETM ((uint32_t)0x00000400) /*!<RESET Interrupt Mask */
-#define USB_CNTR_SUSPM ((uint32_t)0x00000800) /*!<Suspend mode Interrupt Mask */
-#define USB_CNTR_WKUPM ((uint32_t)0x00001000) /*!<Wakeup Interrupt Mask */
-#define USB_CNTR_ERRM ((uint32_t)0x00002000) /*!<Error Interrupt Mask */
-#define USB_CNTR_PMAOVRM ((uint32_t)0x00004000) /*!<Packet Memory Area Over / Underrun Interrupt Mask */
-#define USB_CNTR_CTRM ((uint32_t)0x00008000) /*!<Correct Transfer Interrupt Mask */
-
-/******************* Bit definition for USB_ISTR register *******************/
-#define USB_ISTR_EP_ID ((uint32_t)0x0000000F) /*!<Endpoint Identifier */
-#define USB_ISTR_DIR ((uint32_t)0x00000010) /*!<Direction of transaction */
-#define USB_ISTR_ESOF ((uint32_t)0x00000100) /*!<Expected Start Of Frame */
-#define USB_ISTR_SOF ((uint32_t)0x00000200) /*!<Start Of Frame */
-#define USB_ISTR_RESET ((uint32_t)0x00000400) /*!<USB RESET request */
-#define USB_ISTR_SUSP ((uint32_t)0x00000800) /*!<Suspend mode request */
-#define USB_ISTR_WKUP ((uint32_t)0x00001000) /*!<Wake up */
-#define USB_ISTR_ERR ((uint32_t)0x00002000) /*!<Error */
-#define USB_ISTR_PMAOVRM ((uint32_t)0x00004000) /*!<Packet Memory Area Over / Underrun */
-#define USB_ISTR_CTR ((uint32_t)0x00008000) /*!<Correct Transfer */
-
-#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
-#define USB_CLR_PMAOVRM (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
-#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
-#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
-#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
-#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
-#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
-#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
-
-
-/******************* Bit definition for USB_FNR register ********************/
-#define USB_FNR_FN ((uint32_t)0x000007FF) /*!<Frame Number */
-#define USB_FNR_LSOF ((uint32_t)0x00001800) /*!<Lost SOF */
-#define USB_FNR_LCK ((uint32_t)0x00002000) /*!<Locked */
-#define USB_FNR_RXDM ((uint32_t)0x00004000) /*!<Receive Data - Line Status */
-#define USB_FNR_RXDP ((uint32_t)0x00008000) /*!<Receive Data + Line Status */
-
-/****************** Bit definition for USB_DADDR register *******************/
-#define USB_DADDR_ADD ((uint32_t)0x0000007F) /*!<ADD[6:0] bits (Device Address) */
-#define USB_DADDR_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */
-#define USB_DADDR_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */
-#define USB_DADDR_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */
-#define USB_DADDR_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */
-#define USB_DADDR_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */
-#define USB_DADDR_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */
-#define USB_DADDR_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */
-
-#define USB_DADDR_EF ((uint32_t)0x00000080) /*!<Enable Function */
-
-/****************** Bit definition for USB_BTABLE register ******************/
-#define USB_BTABLE_BTABLE ((uint32_t)0x0000FFF8) /*!<Buffer Table */
-
-/*!< Buffer descriptor table */
-/***************** Bit definition for USB_ADDR0_TX register *****************/
-#define USB_ADDR0_TX_ADDR0_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 0 */
-
-/***************** Bit definition for USB_ADDR1_TX register *****************/
-#define USB_ADDR1_TX_ADDR1_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 1 */
-
-/***************** Bit definition for USB_ADDR2_TX register *****************/
-#define USB_ADDR2_TX_ADDR2_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 2 */
-
-/***************** Bit definition for USB_ADDR3_TX register *****************/
-#define USB_ADDR3_TX_ADDR3_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 3 */
-
-/***************** Bit definition for USB_ADDR4_TX register *****************/
-#define USB_ADDR4_TX_ADDR4_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 4 */
-
-/***************** Bit definition for USB_ADDR5_TX register *****************/
-#define USB_ADDR5_TX_ADDR5_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 5 */
-
-/***************** Bit definition for USB_ADDR6_TX register *****************/
-#define USB_ADDR6_TX_ADDR6_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 6 */
-
-/***************** Bit definition for USB_ADDR7_TX register *****************/
-#define USB_ADDR7_TX_ADDR7_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 7 */
-
-/*----------------------------------------------------------------------------*/
-
-/***************** Bit definition for USB_COUNT0_TX register ****************/
-#define USB_COUNT0_TX_COUNT0_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 */
-
-/***************** Bit definition for USB_COUNT1_TX register ****************/
-#define USB_COUNT1_TX_COUNT1_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 */
-
-/***************** Bit definition for USB_COUNT2_TX register ****************/
-#define USB_COUNT2_TX_COUNT2_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 */
-
-/***************** Bit definition for USB_COUNT3_TX register ****************/
-#define USB_COUNT3_TX_COUNT3_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 3 */
-
-/***************** Bit definition for USB_COUNT4_TX register ****************/
-#define USB_COUNT4_TX_COUNT4_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 */
-
-/***************** Bit definition for USB_COUNT5_TX register ****************/
-#define USB_COUNT5_TX_COUNT5_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 */
-
-/***************** Bit definition for USB_COUNT6_TX register ****************/
-#define USB_COUNT6_TX_COUNT6_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 */
-
-/***************** Bit definition for USB_COUNT7_TX register ****************/
-#define USB_COUNT7_TX_COUNT7_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 */
-
-/*----------------------------------------------------------------------------*/
-
-/**************** Bit definition for USB_COUNT0_TX_0 register ***************/
-#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */
-
-/**************** Bit definition for USB_COUNT0_TX_1 register ***************/
-#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */
-
-/**************** Bit definition for USB_COUNT1_TX_0 register ***************/
-#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */
-
-/**************** Bit definition for USB_COUNT1_TX_1 register ***************/
-#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */
-
-/**************** Bit definition for USB_COUNT2_TX_0 register ***************/
-#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */
-
-/**************** Bit definition for USB_COUNT2_TX_1 register ***************/
-#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */
-
-/**************** Bit definition for USB_COUNT3_TX_0 register ***************/
-#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint32_t)0x0000000003FF) /*!< Transmission Byte Count 3 (low) */
-
-/**************** Bit definition for USB_COUNT3_TX_1 register ***************/
-#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint32_t)0x000003FF0000) /*!< Transmission Byte Count 3 (high) */
-
-/**************** Bit definition for USB_COUNT4_TX_0 register ***************/
-#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */
-
-/**************** Bit definition for USB_COUNT4_TX_1 register ***************/
-#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */
-
-/**************** Bit definition for USB_COUNT5_TX_0 register ***************/
-#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */
-
-/**************** Bit definition for USB_COUNT5_TX_1 register ***************/
-#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */
-
-/**************** Bit definition for USB_COUNT6_TX_0 register ***************/
-#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */
-
-/**************** Bit definition for USB_COUNT6_TX_1 register ***************/
-#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */
-
-/**************** Bit definition for USB_COUNT7_TX_0 register ***************/
-#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */
-
-/**************** Bit definition for USB_COUNT7_TX_1 register ***************/
-#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */
-
-/*----------------------------------------------------------------------------*/
-
-/***************** Bit definition for USB_ADDR0_RX register *****************/
-#define USB_ADDR0_RX_ADDR0_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 0 */
-
-/***************** Bit definition for USB_ADDR1_RX register *****************/
-#define USB_ADDR1_RX_ADDR1_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 1 */
-
-/***************** Bit definition for USB_ADDR2_RX register *****************/
-#define USB_ADDR2_RX_ADDR2_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 2 */
-
-/***************** Bit definition for USB_ADDR3_RX register *****************/
-#define USB_ADDR3_RX_ADDR3_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 3 */
-
-/***************** Bit definition for USB_ADDR4_RX register *****************/
-#define USB_ADDR4_RX_ADDR4_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 4 */
-
-/***************** Bit definition for USB_ADDR5_RX register *****************/
-#define USB_ADDR5_RX_ADDR5_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 5 */
-
-/***************** Bit definition for USB_ADDR6_RX register *****************/
-#define USB_ADDR6_RX_ADDR6_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 6 */
-
-/***************** Bit definition for USB_ADDR7_RX register *****************/
-#define USB_ADDR7_RX_ADDR7_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 7 */
-
-/*----------------------------------------------------------------------------*/
-
-/***************** Bit definition for USB_COUNT0_RX register ****************/
-#define USB_COUNT0_RX_COUNT0_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT0_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT0_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT1_RX register ****************/
-#define USB_COUNT1_RX_COUNT1_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT1_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT1_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT2_RX register ****************/
-#define USB_COUNT2_RX_COUNT2_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT2_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT2_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT3_RX register ****************/
-#define USB_COUNT3_RX_COUNT3_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT3_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT3_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT4_RX register ****************/
-#define USB_COUNT4_RX_COUNT4_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT4_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT4_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT5_RX register ****************/
-#define USB_COUNT5_RX_COUNT5_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT5_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT5_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT6_RX register ****************/
-#define USB_COUNT6_RX_COUNT6_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT6_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT6_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT7_RX register ****************/
-#define USB_COUNT7_RX_COUNT7_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
-
-#define USB_COUNT7_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT7_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
-
-/*----------------------------------------------------------------------------*/
-
-/**************** Bit definition for USB_COUNT0_RX_0 register ***************/
-#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT0_RX_1 register ***************/
-#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT1_RX_0 register ***************/
-#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT1_RX_1 register ***************/
-#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT2_RX_0 register ***************/
-#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT2_RX_1 register ***************/
-#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT3_RX_0 register ***************/
-#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT3_RX_1 register ***************/
-#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT4_RX_0 register ***************/
-#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT4_RX_1 register ***************/
-#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT5_RX_0 register ***************/
-#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT5_RX_1 register ***************/
-#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/*************** Bit definition for USB_COUNT6_RX_0 register ***************/
-#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT6_RX_1 register ***************/
-#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/*************** Bit definition for USB_COUNT7_RX_0 register ****************/
-#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/*************** Bit definition for USB_COUNT7_RX_1 register ****************/
-#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/******************************************************************************/
-/* */
-/* Window WATCHDOG (WWDG) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for WWDG_CR register ********************/
-#define WWDG_CR_T ((uint32_t)0x0000007F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
-#define WWDG_CR_T0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define WWDG_CR_T1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define WWDG_CR_T2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define WWDG_CR_T3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define WWDG_CR_T4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define WWDG_CR_T5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define WWDG_CR_T6 ((uint32_t)0x00000040) /*!< Bit 6 */
-
-#define WWDG_CR_WDGA ((uint32_t)0x00000080) /*!< Activation bit */
-
-/******************* Bit definition for WWDG_CFR register *******************/
-#define WWDG_CFR_W ((uint32_t)0x0000007F) /*!< W[6:0] bits (7-bit window value) */
-#define WWDG_CFR_W0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define WWDG_CFR_W1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define WWDG_CFR_W2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define WWDG_CFR_W3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define WWDG_CFR_W4 ((uint32_t)0x00000010) /*!< Bit 4 */
-#define WWDG_CFR_W5 ((uint32_t)0x00000020) /*!< Bit 5 */
-#define WWDG_CFR_W6 ((uint32_t)0x00000040) /*!< Bit 6 */
-
-#define WWDG_CFR_WDGTB ((uint32_t)0x00000180) /*!< WDGTB[1:0] bits (Timer Base) */
-#define WWDG_CFR_WDGTB0 ((uint32_t)0x00000080) /*!< Bit 0 */
-#define WWDG_CFR_WDGTB1 ((uint32_t)0x00000100) /*!< Bit 1 */
-
-#define WWDG_CFR_EWI ((uint32_t)0x00000200) /*!< Early Wakeup Interrupt */
-
-/******************* Bit definition for WWDG_SR register ********************/
-#define WWDG_SR_EWIF ((uint32_t)0x00000001) /*!< Early Wakeup Interrupt Flag */
-
-/******************************************************************************/
-/* */
-/* SystemTick (SysTick) */
-/* */
-/******************************************************************************/
-
-/***************** Bit definition for SysTick_CTRL register *****************/
-#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */
-#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */
-#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */
-#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */
-
-/***************** Bit definition for SysTick_LOAD register *****************/
-#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */
-
-/***************** Bit definition for SysTick_VAL register ******************/
-#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */
-
-/***************** Bit definition for SysTick_CALIB register ****************/
-#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */
-#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */
-#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */
-
-/******************************************************************************/
-/* */
-/* Nested Vectored Interrupt Controller (NVIC) */
-/* */
-/******************************************************************************/
-
-/****************** Bit definition for NVIC_ISER register *******************/
-#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */
-#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */
-#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */
-#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */
-#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */
-#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */
-#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */
-#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */
-#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */
-#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */
-#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */
-#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */
-#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */
-#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */
-#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */
-#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */
-#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */
-#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */
-#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */
-#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */
-#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */
-#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */
-#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */
-#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */
-#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */
-#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */
-#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */
-#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */
-#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */
-#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */
-#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */
-#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */
-#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */
-
-/****************** Bit definition for NVIC_ICER register *******************/
-#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */
-#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */
-#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */
-#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */
-#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */
-#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */
-#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */
-#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */
-#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */
-#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */
-#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */
-#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */
-#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */
-#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */
-#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */
-#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */
-#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */
-#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */
-#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */
-#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */
-#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */
-#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */
-#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */
-#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */
-#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */
-#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */
-#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */
-#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */
-#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */
-#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */
-#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */
-#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */
-#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */
-
-/****************** Bit definition for NVIC_ISPR register *******************/
-#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */
-#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */
-#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */
-#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */
-#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */
-#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */
-#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */
-#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */
-#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */
-#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */
-#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */
-#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */
-#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */
-#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */
-#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */
-#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */
-#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */
-#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */
-#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */
-#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */
-#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */
-#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */
-#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */
-#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */
-#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */
-#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */
-#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */
-#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */
-#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */
-#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */
-#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */
-#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */
-#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */
-
-/****************** Bit definition for NVIC_ICPR register *******************/
-#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */
-#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */
-#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */
-#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */
-#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */
-#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */
-#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */
-#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */
-#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */
-#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */
-#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */
-#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */
-#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */
-#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */
-#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */
-#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */
-#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */
-#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */
-#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */
-#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */
-#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */
-#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */
-#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */
-#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */
-#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */
-#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */
-#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */
-#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */
-#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */
-#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */
-#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */
-#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */
-#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */
-
-/****************** Bit definition for NVIC_IABR register *******************/
-#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */
-#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */
-#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */
-#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */
-#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */
-#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */
-#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */
-#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */
-#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */
-#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */
-#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */
-#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */
-#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */
-#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */
-#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */
-#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */
-#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */
-#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */
-#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */
-#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */
-#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */
-#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */
-#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */
-#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */
-#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */
-#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */
-#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */
-#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */
-#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */
-#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */
-#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */
-#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */
-#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */
-
-/****************** Bit definition for NVIC_PRI0 register *******************/
-#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */
-#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */
-#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */
-#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */
-
-/****************** Bit definition for NVIC_PRI1 register *******************/
-#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */
-#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */
-#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */
-#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */
-
-/****************** Bit definition for NVIC_PRI2 register *******************/
-#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */
-#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */
-#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */
-#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */
-
-/****************** Bit definition for NVIC_PRI3 register *******************/
-#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */
-#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */
-#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */
-#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */
-
-/****************** Bit definition for NVIC_PRI4 register *******************/
-#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */
-#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */
-#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */
-#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */
-
-/****************** Bit definition for NVIC_PRI5 register *******************/
-#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */
-#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */
-#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */
-#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */
-
-/****************** Bit definition for NVIC_PRI6 register *******************/
-#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */
-#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */
-#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */
-#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */
-
-/****************** Bit definition for NVIC_PRI7 register *******************/
-#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */
-#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */
-#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */
-#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */
-
-/****************** Bit definition for SCB_CPUID register *******************/
-#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */
-#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */
-#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */
-#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */
-#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */
-
-/******************* Bit definition for SCB_ICSR register *******************/
-#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */
-#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */
-#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */
-#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */
-#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */
-#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */
-#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */
-#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */
-#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */
-#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */
-
-/******************* Bit definition for SCB_VTOR register *******************/
-#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */
-#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */
-
-/*!<***************** Bit definition for SCB_AIRCR register *******************/
-#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */
-#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */
-#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */
-
-#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */
-#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */
-#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */
-#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */
-
-/* prority group configuration */
-#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */
-#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */
-
-#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */
-#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */
-
-/******************* Bit definition for SCB_SCR register ********************/
-#define SCB_SCR_SLEEPONEXIT ((uint32_t)0x00000002) /*!< Sleep on exit bit */
-#define SCB_SCR_SLEEPDEEP ((uint32_t)0x00000004) /*!< Sleep deep bit */
-#define SCB_SCR_SEVONPEND ((uint32_t)0x00000010) /*!< Wake up from WFE */
-
-/******************** Bit definition for SCB_CCR register *******************/
-#define SCB_CCR_NONBASETHRDENA ((uint32_t)0x00000001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */
-#define SCB_CCR_USERSETMPEND ((uint32_t)0x00000002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */
-#define SCB_CCR_UNALIGN_TRP ((uint32_t)0x00000008) /*!< Trap for unaligned access */
-#define SCB_CCR_DIV_0_TRP ((uint32_t)0x00000010) /*!< Trap on Divide by 0 */
-#define SCB_CCR_BFHFNMIGN ((uint32_t)0x00000100) /*!< Handlers running at priority -1 and -2 */
-#define SCB_CCR_STKALIGN ((uint32_t)0x00000200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */
-
-/******************* Bit definition for SCB_SHPR register ********************/
-#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */
-#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */
-#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */
-#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */
-
-/****************** Bit definition for SCB_SHCSR register *******************/
-#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */
-#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */
-#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */
-#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */
-#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */
-#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */
-#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */
-#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */
-#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */
-#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */
-#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */
-#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */
-#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */
-#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */
-
-/******************* Bit definition for SCB_CFSR register *******************/
-/*!< MFSR */
-#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */
-#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */
-#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */
-#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */
-#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */
-/*!< BFSR */
-#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */
-#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */
-#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */
-#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */
-#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */
-#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */
-/*!< UFSR */
-#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to excecute an undefined instruction */
-#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */
-#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */
-#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */
-#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */
-#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */
-
-/******************* Bit definition for SCB_HFSR register *******************/
-#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occures because of vector table read on exception processing */
-#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */
-#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */
-
-/******************* Bit definition for SCB_DFSR register *******************/
-#define SCB_DFSR_HALTED ((uint32_t)0x00000001) /*!< Halt request flag */
-#define SCB_DFSR_BKPT ((uint32_t)0x00000002) /*!< BKPT flag */
-#define SCB_DFSR_DWTTRAP ((uint32_t)0x00000004) /*!< Data Watchpoint and Trace (DWT) flag */
-#define SCB_DFSR_VCATCH ((uint32_t)0x00000008) /*!< Vector catch flag */
-#define SCB_DFSR_EXTERNAL ((uint32_t)0x00000010) /*!< External debug request flag */
-
-/******************* Bit definition for SCB_MMFAR register ******************/
-#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */
-
-/******************* Bit definition for SCB_BFAR register *******************/
-#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */
-
-/******************* Bit definition for SCB_afsr register *******************/
-#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */
-/**
- * @}
- */
-
- /**
- * @}
- */
-/** @addtogroup Exported_macro
- * @{
- */
-
-/****************************** ADC Instances *********************************/
-#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
-
-/******************************** COMP Instances ******************************/
-#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
- ((INSTANCE) == COMP2))
-
-/****************************** CRC Instances *********************************/
-#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
-
-/****************************** DAC Instances *********************************/
-#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
-
-/****************************** DMA Instances *********************************/
-#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
- ((INSTANCE) == DMA1_Channel2) || \
- ((INSTANCE) == DMA1_Channel3) || \
- ((INSTANCE) == DMA1_Channel4) || \
- ((INSTANCE) == DMA1_Channel5) || \
- ((INSTANCE) == DMA1_Channel6) || \
- ((INSTANCE) == DMA1_Channel7) || \
- ((INSTANCE) == DMA2_Channel1) || \
- ((INSTANCE) == DMA2_Channel2) || \
- ((INSTANCE) == DMA2_Channel3) || \
- ((INSTANCE) == DMA2_Channel4) || \
- ((INSTANCE) == DMA2_Channel5))
-
-/******************************* GPIO Instances *******************************/
-#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
- ((INSTANCE) == GPIOB) || \
- ((INSTANCE) == GPIOC) || \
- ((INSTANCE) == GPIOD) || \
- ((INSTANCE) == GPIOE) || \
- ((INSTANCE) == GPIOH))
-
-/**************************** GPIO Lock Instances *****************************/
-/* On L1, all GPIO Bank support the Lock mechanism */
-#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE)
-
-/******************************** I2C Instances *******************************/
-#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
- ((INSTANCE) == I2C2))
-
-#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
- ((INSTANCE) == SPI2) || \
- ((INSTANCE) == SPI3))
-/****************************** IWDG Instances ********************************/
-#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
-
-/****************************** OPAMP Instances *******************************/
-#define IS_OPAMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == OPAMP1) || \
- ((INSTANCE) == OPAMP2))
-
-/****************************** RTC Instances *********************************/
-#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
-
-/******************************** SPI Instances *******************************/
-#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
- ((INSTANCE) == SPI2) || \
- ((INSTANCE) == SPI3))
-
-/****************************** TIM Instances *********************************/
-#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM6) || \
- ((INSTANCE) == TIM7) || \
- ((INSTANCE) == TIM9) || \
- ((INSTANCE) == TIM10) || \
- ((INSTANCE) == TIM11))
-
-#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9) || \
- ((INSTANCE) == TIM10) || \
- ((INSTANCE) == TIM11))
-
-#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5))
-
-#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5))
-
-#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9) || \
- ((INSTANCE) == TIM10) || \
- ((INSTANCE) == TIM11))
-
-#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4))
-
-#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5))
-
-#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM6) || \
- ((INSTANCE) == TIM7) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM5)
-
-#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5))
-
-#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
- ((((INSTANCE) == TIM2) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))) \
- || \
- (((INSTANCE) == TIM3) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))) \
- || \
- (((INSTANCE) == TIM4) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))) \
- || \
- (((INSTANCE) == TIM5) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))) \
- || \
- (((INSTANCE) == TIM9) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2))) \
- || \
- (((INSTANCE) == TIM10) && \
- (((CHANNEL) == TIM_CHANNEL_1))) \
- || \
- (((INSTANCE) == TIM11) && \
- (((CHANNEL) == TIM_CHANNEL_1))))
-
-#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9) || \
- ((INSTANCE) == TIM10) || \
- ((INSTANCE) == TIM11))
-
-#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM6) || \
- ((INSTANCE) == TIM7))
-
-#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5))
-
-#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM4) || \
- ((INSTANCE) == TIM5) || \
- ((INSTANCE) == TIM9))
-
-#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3) || \
- ((INSTANCE) == TIM9) || \
- ((INSTANCE) == TIM10) || \
- ((INSTANCE) == TIM11))
-
-/******************** USART Instances : Synchronous mode **********************/
-#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/******************** UART Instances : Asynchronous mode **********************/
-#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/******************** UART Instances : Half-Duplex mode **********************/
-#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/******************** UART Instances : LIN mode **********************/
-#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/****************** UART Instances : Hardware Flow control ********************/
-#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/********************* UART Instances : Smard card mode ***********************/
-#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/*********************** UART Instances : IRDA mode ***************************/
-#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/***************** UART Instances : Multi-Processor mode **********************/
-#define IS_UART_MULTIPROCESSOR_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) || \
- ((INSTANCE) == USART3))
-
-/****************************** WWDG Instances ********************************/
-#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
-
-/****************************** USB Instances ********************************/
-#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
-
-/**
- * @}
- */
-
-/******************************************************************************/
-/* For a painless codes migration between the STM32L1xx device product */
-/* lines, the aliases defined below are put in place to overcome the */
-/* differences in the interrupt handlers and IRQn definitions. */
-/* No need to update developed interrupt code when moving across */
-/* product lines within the same STM32L1 Family */
-/******************************************************************************/
-
-/* Aliases for __IRQn */
-
-/* Aliases for __IRQHandler */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32L151xC_H */
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/stm32l1xx.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,261 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l1xx.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 5-September-2014
- * @brief CMSIS STM32L1xx Device Peripheral Access Layer Header File.
- *
- * The file is the unique include file that the application programmer
- * is using in the C source code, usually in main.c. This file contains:
- * - Configuration section that allows to select:
- * - The STM32L1xx device used in the target application
- * - To use or not the peripherals drivers in application code(i.e.
- * code will be based on direct access to peripherals registers
- * rather than drivers API), this option is controlled by
- * "#define USE_HAL_DRIVER"
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32l1xx
- * @{
- */
-
-#ifndef __STM32L1XX_H
-#define __STM32L1XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-
-/** @addtogroup Library_configuration_section
- * @{
- */
-
-
-//MODTRONIX BEGIN - HAL Defines ///////////////////////////////////////////////
-//Provide place for adding HAL defines. Alternative to adding them in IDE project properties.
-//Add project defines here, or add them to your toolchain compiler preprocessor
-
-//Defines what ports to use for default serial port.
-//0 = B10/B11
-//1 = A2/A3
-#if !defined (MX_DEFAULT_SERIAL_PINS)
-#define MX_DEFAULT_SERIAL_PINS 0 /*!< Use B10/B11 for default serial port, in stead of A2/A3 */
-#endif
-
-//MODTRONIX END ///////////////////////////////////////////////////////////////
-
-/* Uncomment the line below according to the target STM32L device used in your
- application
- */
-
-#if !defined (STM32L100xB) && !defined (STM32L100xBA) && !defined (STM32L100xC) && \
- !defined (STM32L151xB) && !defined (STM32L151xBA) && !defined (STM32L151xC) && !defined (STM32L151xCA) && !defined (STM32L151xD) && !defined (STM32L151xE) && \
- !defined (STM32L152xB) && !defined (STM32L152xBA) && !defined (STM32L152xC) && !defined (STM32L152xCA) && !defined (STM32L152xD) && !defined (STM32L152xE) && \
- !defined (STM32L162xC) && !defined (STM32L162xCA) && !defined (STM32L162xD) && !defined (STM32L162xE)
- /* #define STM32L100xB */ /*!< STM32L100C6, STM32L100R and STM32L100RB Devices */
- /* #define STM32L100xBA */ /*!< STM32L100C6-A, STM32L100R8-A and STM32L100RB-A Devices */
- /* #define STM32L100xC */ /*!< STM32L100RC Devices */
- /* #define STM32L151xB */ /*!< STM32L151C6, STM32L151R6, STM32L151C8, STM32L151R8, STM32L151V8, STM32L151CB, STM32L151RB and STM32L151VB */
- /* #define STM32L151xBA */ /*!< STM32L151C6-A, STM32L151R6-A, STM32L151C8-A, STM32L151R8-A, STM32L151V8-A, STM32L151CB-A, STM32L151RB-A and STM32L151VB-A */
- #define STM32L151xC /*!< STM32L151CC, STM32L151UC, STM32L151RC and STM32L151VC */
- /* #define STM32L151xCA */ /*!< STM32L151RC-A, STM32L151VC-A, STM32L151QC and STM32L151ZC */
- /* #define STM32L151xD */ /*!< STM32L151QD, STM32L151RD, STM32L151VD & STM32L151ZD */
- /* #define STM32L151xE */ /*!< STM32L151QE, STM32L151RE, STM32L151VE and STM32L151ZE */
- /* #define STM32L152xB */ /*!< STM32L152C6, STM32L152R6, STM32L152C8, STM32L152R8, STM32L152V8, STM32L152CB, STM32L152RB and STM32L152VB */
- /* #define STM32L152xBA */ /*!< STM32L152C6-A, STM32L152R6-A, STM32L152C8-A, STM32L152R8-A, STM32L152V8-A, STM32L152CB-A, STM32L152RB-A and STM32L152VB-A */
- /* #define STM32L152xC */ /*!< STM32L152CC, STM32L152UC, STM32L152RC and STM32L152VC */
- /* #define STM32L152xCA */ /*!< STM32L152RC-A, STM32L152VC-A, STM32L152QC and STM32L152ZC */
- /* #define STM32L152xD */ /*!< STM32L152QD, STM32L152RD, STM32L152VD and STM32L152ZD */
- /* #define STM32L152xE */ /*!< STM32L152QE, STM32L152RE, STM32L152VE and STM32L152ZE */
- /* #define STM32L162xC */ /*!< STM32L162RC and STM32L162VC */
- /* #define STM32L162xCA */ /*!< STM32L162RC-A, STM32L162VC-A, STM32L162QC and STM32L162ZC */
- /* #define STM32L162xD */ /*!< STM32L162QD, STM32L162RD, STM32L162VD and STM32L162ZD */
- /* #define STM32L162xE */ /*!< STM32L162RE, STM32L162VE and STM32L162ZE */
-#endif
-
-/* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
- */
-
-#if !defined (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
- */
-#define USE_HAL_DRIVER
-#endif /* USE_HAL_DRIVER */
-
-/**
- * @brief CMSIS Device version number V2.0.0
- */
-#define __STM32L1xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
-#define __STM32L1xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
-#define __STM32L1xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
-#define __STM32L1xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
-#define __STM32L1xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
- |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
- |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
- |(__CMSIS_DEVICE_HAL_VERSION_RC))
-
-/**
- * @}
- */
-
-/** @addtogroup Device_Included
- * @{
- */
-
-#if defined(STM32L100xB)
- #include "stm32l100xb.h"
-#elif defined(STM32L100xBA)
- #include "stm32l100xba.h"
-#elif defined(STM32L100xC)
- #include "stm32l100xc.h"
-#elif defined(STM32L151xB)
- #include "stm32l151xb.h"
-#elif defined(STM32L151xBA)
- #include "stm32l151xba.h"
-#elif defined(STM32L151xC)
- #include "stm32l151xc.h"
-#elif defined(STM32L151xCA)
- #include "stm32l151xca.h"
-#elif defined(STM32L151xD)
- #include "stm32l151xd.h"
-#elif defined(STM32L151xE)
- #include "stm32l151xe.h"
-#elif defined(STM32L152xB)
- #include "stm32l152xb.h"
-#elif defined(STM32L152xBA)
- #include "stm32l152xba.h"
-#elif defined(STM32L152xC)
- #include "stm32l152xc.h"
-#elif defined(STM32L152xCA)
- #include "stm32l152xca.h"
-#elif defined(STM32L152xD)
- #include "stm32l152xd.h"
-#elif defined(STM32L152xE)
- #include "stm32l152xe.h"
-#elif defined(STM32L162xC)
- #include "stm32l162xc.h"
-#elif defined(STM32L162xCA)
- #include "stm32l162xca.h"
-#elif defined(STM32L162xD)
- #include "stm32l162xd.h"
-#elif defined(STM32L162xE)
- #include "stm32l162xe.h"
-#else
- #error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)"
-#endif
-
-/**
- * @}
- */
-
-/** @addtogroup Exported_types
- * @{
- */
-typedef enum
-{
- RESET = 0,
- SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum
-{
- DISABLE = 0,
- ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum
-{
- ERROR = 0,
- SUCCESS = !ERROR
-} ErrorStatus;
-
-/**
- * @}
- */
-
-
-/** @addtogroup Exported_macros
- * @{
- */
-#define SET_BIT(REG, BIT) ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT) ((REG) & (BIT))
-
-#define CLEAR_REG(REG) ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL) ((REG) = (VAL))
-
-#define READ_REG(REG) ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
-
-
-/**
- * @}
- */
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32l1xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32L1xx_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/stm32l1xx_hal_conf.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,291 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32l1xx_hal_conf_template.h
- * @author MCD Application Team
- * @version V1.0.0
- * @date 5-September-2014
- * @brief HAL configuration template file.
- * This file should be copied to the application folder and renamed
- * to stm32l1xx_hal_conf.h.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L1xx_HAL_CONF_H
-#define __STM32L1xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
- * @brief This is the list of modules to be used in the HAL driver
- */
-#define HAL_MODULE_ENABLED
-#define HAL_ADC_MODULE_ENABLED
-#define HAL_COMP_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_CRC_MODULE_ENABLED
-#define HAL_CRYP_MODULE_ENABLED
-#define HAL_DAC_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_I2S_MODULE_ENABLED
-#define HAL_IRDA_MODULE_ENABLED
-#define HAL_IWDG_MODULE_ENABLED
-#define HAL_LCD_MODULE_ENABLED
-#define HAL_NOR_MODULE_ENABLED
-#define HAL_OPAMP_MODULE_ENABLED
-#define HAL_PCD_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_RTC_MODULE_ENABLED
-#define HAL_SD_MODULE_ENABLED
-#define HAL_SMARTCARD_MODULE_ENABLED
-#define HAL_SPI_MODULE_ENABLED
-#define HAL_SRAM_MODULE_ENABLED
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-#define HAL_USART_MODULE_ENABLED
-#define HAL_WWDG_MODULE_ENABLED
-
-/* ########################## Oscillator Values adaptation ####################*/
-/**
- * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
- * This value is used by the RCC HAL module to compute the system frequency
- * (when HSE is used as system clock source, directly or through the PLL).
- */
-#if !defined (HSE_VALUE)
- #define HSE_VALUE ((uint32_t)16000000) /*!< NZ32-SC151 has a 16MHz External crystal */
-#endif /* HSE_VALUE */
-
-#if !defined (HSE_STARTUP_TIMEOUT)
- #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
- * @brief Internal Multiple Speed oscillator (MSI) default value.
- * This value is the default MSI range value after Reset.
- */
-#if !defined (MSI_VALUE)
- #define MSI_VALUE ((uint32_t)2097000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* MSI_VALUE */
-/**
- * @brief Internal High Speed oscillator (HSI) value.
- * This value is used by the RCC HAL module to compute the system frequency
- * (when HSI is used as system clock source, directly or through the PLL).
- */
-#if !defined (HSI_VALUE)
- #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
- * @brief External Low Speed oscillator (LSE) value.
- * This value is used by the UART, RTC HAL module to compute the system frequency
- */
-#if !defined (LSE_VALUE)
- #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
-#endif /* LSE_VALUE */
-
-
-#if !defined (LSE_STARTUP_TIMEOUT)
- #define LSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for LSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
- === you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
- * @brief This is the HAL system configuration section
- */
-#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
-#define TICK_INT_PRIORITY ((uint32_t)0x000F) /*!< tick interrupt priority */
-#define USE_RTOS 0
-#define PREFETCH_ENABLE 1
-#define INSTRUCTION_CACHE_ENABLE 0
-#define DATA_CACHE_ENABLE 0
-
-/* ########################## Assert Selection ############################## */
-/**
- * @brief Uncomment the line below to expanse the "assert_param" macro in the
- * HAL drivers code
- */
-/*#define USE_FULL_ASSERT 1*/
-
-/* Includes ------------------------------------------------------------------*/
-/**
- * @brief Include module's header file
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
- #include "stm32l1xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
- #include "stm32l1xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
- #include "stm32l1xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
- #include "stm32l1xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
- #include "stm32l1xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
- #include "stm32l1xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
- #include "stm32l1xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
- #include "stm32l1xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
- #include "stm32l1xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
- #include "stm32l1xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
- #include "stm32l1xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
- #include "stm32l1xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32l1xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32l1xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32l1xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LCD_MODULE_ENABLED
- #include "stm32l1xx_hal_lcd.h"
-#endif /* HAL_LCD_MODULE_ENABLED */
-
-#ifdef HAL_OPAMP_MODULE_ENABLED
- #include "stm32l1xx_hal_opamp.h"
-#endif /* HAL_OPAMP_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32l1xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32l1xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32l1xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32l1xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32l1xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32l1xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32l1xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32l1xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32l1xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32l1xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32l1xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef USE_FULL_ASSERT
-/**
- * @brief The assert_param macro is used for function's parameters check.
- * @param expr: If expr is false, it calls assert_failed function
- * which reports the name of the source file and the source
- * line number of the call that failed.
- * If expr is true, it returns no value.
- * @retval None
- */
- #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
- void assert_failed(uint8_t* file, uint32_t line);
-#else
- #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L1xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/system_stm32l1xx.c Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,605 +0,0 @@
-/**
- ******************************************************************************
- * @file system_stm32l1xx.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 5-September-2014
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
- *
- * This file provides two functions and one global variable to be called from
- * user application:
- * - SystemInit(): This function is called at startup just after reset and
- * before branch to main program. This call is made inside
- * the "startup_stm32l1xx.s" file.
- *
- * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
- * by the user application to setup the SysTick
- * timer or configure other parameters.
- *
- * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
- * be called whenever the core clock is changed
- * during program execution.
- *
- * This file configures the system clock as follows:
- *-----------------------------------------------------------------------------
- * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
- * | (external 16 MHz clock) | (internal 16 MHz)
- * | 2- PLL_HSE_XTAL |
- * | (external 16 MHz xtal) |
- *-----------------------------------------------------------------------------
- * SYSCLK(MHz) | 32 | 32
- *-----------------------------------------------------------------------------
- * AHBCLK (MHz) | 32 | 32
- *-----------------------------------------------------------------------------
- * APB1CLK (MHz) | 32 | 32
- *-----------------------------------------------------------------------------
- * APB2CLK (MHz) | 32 | 32
- *-----------------------------------------------------------------------------
- * USB capable (48 MHz precise clock) | YES | NO
- *-----------------------------------------------------------------------------
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32l1xx_system
- * @{
- */
-
-/** @addtogroup STM32L1xx_System_Private_Includes
- * @{
- */
-
-#include "stm32l1xx.h"
-#include "hal_tick.h"
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Private_Defines
- * @{
- */
-#if !defined (HSE_VALUE)
- #define HSE_VALUE ((uint32_t)16000000) /*!< Default value of the External oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSE_VALUE */
-
-#if !defined (HSI_VALUE)
- #define HSI_VALUE ((uint32_t)16000000) /*!< Default value of the Internal oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSI_VALUE */
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
- on STM32L152D_EVAL board as data memory */
-/* #define DATA_IN_ExtSRAM */
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
- Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
- This value must be a multiple of 0x200. */
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Private_Macros
- * @{
- */
-
-/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
-#define USE_PLL_HSE_EXTC (0) /* Use external clock */
-#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Private_Variables
- * @{
- */
- /* This variable is updated in three ways:
- 1) by calling CMSIS function SystemCoreClockUpdate()
- 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
- 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
- Note: If you use this function to configure the system clock; then there
- is no need to call the 2 first functions listed above, since SystemCoreClock
- variable is updated automatically.
- */
-uint32_t SystemCoreClock = 32000000; /* Default with HSI. Will be updated if HSE is used */
-const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48};
-const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes
- * @{
- */
-
-#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
-#ifdef DATA_IN_ExtSRAM
- static void SystemInit_ExtMemCtl(void);
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
-
-#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
-uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
-#endif
-
-uint8_t SetSysClock_PLL_HSI(void);
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Private_Functions
- * @{
- */
-
-/**
- * @brief Setup the microcontroller system.
- * Initialize the Embedded Flash Interface, the PLL and update the
- * SystemCoreClock variable.
- * @param None
- * @retval None
- */
-void SystemInit (void)
-{
- /*!< Set MSION bit */
- RCC->CR |= (uint32_t)0x00000100;
-
- /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
- RCC->CFGR &= (uint32_t)0x88FFC00C;
-
- /*!< Reset HSION, HSEON, CSSON and PLLON bits */
- RCC->CR &= (uint32_t)0xEEFEFFFE;
-
- /*!< Reset HSEBYP bit */
- RCC->CR &= (uint32_t)0xFFFBFFFF;
-
- /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
- RCC->CFGR &= (uint32_t)0xFF02FFFF;
-
- /*!< Disable all interrupts */
- RCC->CIR = 0x00000000;
-
-#ifdef DATA_IN_ExtSRAM
- SystemInit_ExtMemCtl();
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef VECT_TAB_SRAM
- SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
- SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif
-
- /* Configure the Cube driver */
- SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
- HAL_Init();
-
- /* Configure the System clock source, PLL Multiplier and Divider factors,
- AHB/APBx prescalers and Flash settings */
- SetSysClock();
-
- /* Reset the timer to avoid issues after the RAM initialization */
- TIM_MST_RESET_ON;
- TIM_MST_RESET_OFF;
-}
-
-/**
- * @brief Update SystemCoreClock according to Clock Register Values
- * The SystemCoreClock variable contains the core clock (HCLK), it can
- * be used by the user application to setup the SysTick timer or configure
- * other parameters.
- *
- * @note Each time the core clock (HCLK) changes, this function must be called
- * to update SystemCoreClock variable value. Otherwise, any configuration
- * based on this variable will be incorrect.
- *
- * @note - The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- *
- * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
- * value as defined by the MSI range.
- *
- * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
- *
- * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
- *
- * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied/divided by the PLL factors.
- *
- * (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value
- * 16 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- *
- * (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value
- * 8 MHz), user has to ensure that HSE_VALUE is same as the real
- * frequency of the crystal used. Otherwise, this function may
- * have wrong result.
- *
- * - The result of this function could be not correct when using fractional
- * value for HSE crystal.
- * @param None
- * @retval None
- */
-void SystemCoreClockUpdate (void)
-{
- uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0;
-
- /* Get SYSCLK source -------------------------------------------------------*/
- tmp = RCC->CFGR & RCC_CFGR_SWS;
-
- switch (tmp)
- {
- case 0x00: /* MSI used as system clock */
- msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
- SystemCoreClock = (32768 * (1 << (msirange + 1)));
- break;
- case 0x04: /* HSI used as system clock */
- SystemCoreClock = HSI_VALUE;
- break;
- case 0x08: /* HSE used as system clock */
- SystemCoreClock = HSE_VALUE;
- break;
- case 0x0C: /* PLL used as system clock */
- /* Get PLL clock source and multiplication factor ----------------------*/
- pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
- plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
- pllmul = PLLMulTable[(pllmul >> 18)];
- plldiv = (plldiv >> 22) + 1;
-
- pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-
- if (pllsource == 0x00)
- {
- /* HSI oscillator clock selected as PLL clock entry */
- SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
- }
- else
- {
- /* HSE selected as PLL clock entry */
- SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
- }
- break;
- default: /* MSI used as system clock */
- msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
- SystemCoreClock = (32768 * (1 << (msirange + 1)));
- break;
- }
- /* Compute HCLK clock frequency --------------------------------------------*/
- /* Get HCLK prescaler */
- tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
- /* HCLK clock frequency */
- SystemCoreClock >>= tmp;
-}
-
-#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
-#ifdef DATA_IN_ExtSRAM
-/**
- * @brief Setup the external memory controller.
- * Called in SystemInit() function before jump to main.
- * This function configures the external SRAM mounted on STM32L152D_EVAL board
- * This SRAM will be used as program data memory (including heap and stack).
- * @param None
- * @retval None
- */
-void SystemInit_ExtMemCtl(void)
-{
-/*-- GPIOs Configuration -----------------------------------------------------*/
-/*
- +-------------------+--------------------+------------------+------------------+
- + SRAM pins assignment +
- +-------------------+--------------------+------------------+------------------+
- | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
- | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
- | PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
- | PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
- | PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
- | PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
- | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 |
- | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+
- | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 |
- | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 |
- | PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+
- | PD15 <-> FSMC_D1 |--------------------+
- +-------------------+
-*/
-
- /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
- RCC->AHBENR = 0x000080D8;
-
- /* Connect PDx pins to FSMC Alternate function */
- GPIOD->AFR[0] = 0x00CC00CC;
- GPIOD->AFR[1] = 0xCCCCCCCC;
- /* Configure PDx pins in Alternate function mode */
- GPIOD->MODER = 0xAAAA0A0A;
- /* Configure PDx pins speed to 40 MHz */
- GPIOD->OSPEEDR = 0xFFFF0F0F;
- /* Configure PDx pins Output type to push-pull */
- GPIOD->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PDx pins */
- GPIOD->PUPDR = 0x00000000;
-
- /* Connect PEx pins to FSMC Alternate function */
- GPIOE->AFR[0] = 0xC00000CC;
- GPIOE->AFR[1] = 0xCCCCCCCC;
- /* Configure PEx pins in Alternate function mode */
- GPIOE->MODER = 0xAAAA800A;
- /* Configure PEx pins speed to 40 MHz */
- GPIOE->OSPEEDR = 0xFFFFC00F;
- /* Configure PEx pins Output type to push-pull */
- GPIOE->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PEx pins */
- GPIOE->PUPDR = 0x00000000;
-
- /* Connect PFx pins to FSMC Alternate function */
- GPIOF->AFR[0] = 0x00CCCCCC;
- GPIOF->AFR[1] = 0xCCCC0000;
- /* Configure PFx pins in Alternate function mode */
- GPIOF->MODER = 0xAA000AAA;
- /* Configure PFx pins speed to 40 MHz */
- GPIOF->OSPEEDR = 0xFF000FFF;
- /* Configure PFx pins Output type to push-pull */
- GPIOF->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PFx pins */
- GPIOF->PUPDR = 0x00000000;
-
- /* Connect PGx pins to FSMC Alternate function */
- GPIOG->AFR[0] = 0x00CCCCCC;
- GPIOG->AFR[1] = 0x00000C00;
- /* Configure PGx pins in Alternate function mode */
- GPIOG->MODER = 0x00200AAA;
- /* Configure PGx pins speed to 40 MHz */
- GPIOG->OSPEEDR = 0x00300FFF;
- /* Configure PGx pins Output type to push-pull */
- GPIOG->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PGx pins */
- GPIOG->PUPDR = 0x00000000;
-
-/*-- FSMC Configuration ------------------------------------------------------*/
- /* Enable the FSMC interface clock */
- RCC->AHBENR = 0x400080D8;
-
- /* Configure and enable Bank1_SRAM3 */
- FSMC_Bank1->BTCR[4] = 0x00001011;
- FSMC_Bank1->BTCR[5] = 0x00000300;
- FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
-/*
- Bank1_SRAM3 is configured as follow:
-
- p.FSMC_AddressSetupTime = 0;
- p.FSMC_AddressHoldTime = 0;
- p.FSMC_DataSetupTime = 3;
- p.FSMC_BusTurnAroundDuration = 0;
- p.FSMC_CLKDivision = 0;
- p.FSMC_DataLatency = 0;
- p.FSMC_AccessMode = FSMC_AccessMode_A;
-
- FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3;
- FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
- FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
- FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
- FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
- FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
- FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
- FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
- FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
- FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
- FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
- FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
- FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
- FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
- FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
-
- FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
-
- FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE);
-*/
-
-}
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
-
-/**
- * @brief Configures the System clock source, PLL Multiplier and Divider factors,
- * AHB/APBx prescalers and Flash settings
- * @note This function should be called only once the RCC clock configuration
- * is reset to the default reset state (done in SystemInit() function).
- * @param None
- * @retval None
- */
-void SetSysClock(void)
-{
- /* 1- Try to start with HSE and external clock */
-#if USE_PLL_HSE_EXTC != 0
- if (SetSysClock_PLL_HSE(1) == 0)
-#endif
- {
- /* 2- If fail try to start with HSE and external xtal */
- #if USE_PLL_HSE_XTAL != 0
- if (SetSysClock_PLL_HSE(0) == 0)
- #endif
- {
- /* 3- If fail start with HSI clock */
- if (SetSysClock_PLL_HSI() == 0)
- {
- while(1)
- {
- // [TODO] Put something here to tell the user that a problem occured...
- }
- }
- }
- }
-
- /* Output clock on MCO1 pin(PA8) for debugging purpose */
- //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
-}
-
-#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
-/******************************************************************************/
-/* PLL (clocked by HSE) used as System clock source */
-/******************************************************************************/
-uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
-{
- RCC_ClkInitTypeDef RCC_ClkInitStruct;
- RCC_OscInitTypeDef RCC_OscInitStruct;
-
- /* Used to gain time after DeepSleep in case HSI is used */
- if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
- {
- return 0;
- }
-
- /* The voltage scaling allows optimizing the power consumption when the device is
- clocked below the maximum system frequency, to update the voltage scaling value
- regarding system frequency refer to product datasheet. */
- __PWR_CLK_ENABLE();
- __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
-
- /* Enable HSE and HSI48 oscillators and activate PLL with HSE as source */
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
- if (bypass == 0)
- {
- RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 16 MHz xtal on OSC_IN/OSC_OUT */
- }
- else
- {
- RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 16 MHz clock on OSC_IN */
- }
- RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
- // SYSCLK = 32 MHz ((16 MHz * 6) / 3)
- // USBCLK = 48 MHz ((16 MHz * 6) / 2) --> USB OK
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
- RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
- RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
- RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3;
-
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
- {
- return 0; // FAIL
- }
-
- /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
- RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
- RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
- RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
- RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
- RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
- if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
- {
- return 0; // FAIL
- }
-
- /* Output clock on MCO1 pin(PA8) for debugging purpose */
- //if (bypass == 0)
- //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
- //else
- //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
-
- return 1; // OK
-}
-#endif
-
-/******************************************************************************/
-/* PLL (clocked by HSI) used as System clock source */
-/******************************************************************************/
-uint8_t SetSysClock_PLL_HSI(void)
-{
- RCC_ClkInitTypeDef RCC_ClkInitStruct;
- RCC_OscInitTypeDef RCC_OscInitStruct;
-
- /* The voltage scaling allows optimizing the power consumption when the device is
- clocked below the maximum system frequency, to update the voltage scaling value
- regarding system frequency refer to product datasheet. */
- __PWR_CLK_ENABLE();
- __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
-
- /* Enable HSI oscillator and activate PLL with HSI as source */
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
- RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
- RCC_OscInitStruct.HSIState = RCC_HSI_ON;
- // SYSCLK = 32 MHz ((16 MHz * 4) / 2)
- // USBCLK = 64 MHz (16 MHz * 4) --> USB not possible
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
- RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
- RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4;
- RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV2;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
- {
- return 0; // FAIL
- }
-
- /* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */
- while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {};
-
- /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
- RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
- RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
- RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
- RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
- RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
- if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
- {
- return 0; // FAIL
- }
-
- /* Output clock on MCO1 pin(PA8) for debugging purpose */
- //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
-
- return 1; // OK
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/system_stm32l1xx.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,123 +0,0 @@
-/**
- ******************************************************************************
- * @file system_stm32l1xx.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 5-September-2014
- * @brief CMSIS Cortex-M3 Device System Source File for STM32L1xx devices.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32l1xx_system
- * @{
- */
-
-/**
- * @brief Define to prevent recursive inclusion
- */
-#ifndef __SYSTEM_STM32L1XX_H
-#define __SYSTEM_STM32L1XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup STM32L1xx_System_Includes
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @addtogroup STM32L1xx_System_Exported_types
- * @{
- */
- /* This variable is updated in three ways:
- 1) by calling CMSIS function SystemCoreClockUpdate()
- 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
- 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
- Note: If you use this function to configure the system clock; then there
- is no need to call the 2 first functions listed above, since SystemCoreClock
- variable is updated automatically.
- */
-extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Exported_Constants
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32L1xx_System_Exported_Functions
- * @{
- */
-
-extern void SystemInit(void);
-extern void SystemCoreClockUpdate(void);
-extern void SetSysClock(void);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__SYSTEM_STM32L1XX_H */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_ARM_MICRO/startup_stm32l151xc.S Thu Feb 18 10:00:10 2016 +0000 @@ -0,0 +1,323 @@ +; STM32L151RC Ultra Low Power High-density Devices vector table for MDK ARM_MICRO toolchain +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2015, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size +__initial_sp EQU 0x20008000 ; Top of RAM (32 KB) + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp + DCD RTC_WKUP_IRQHandler ; RTC Wakeup + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD DAC_IRQHandler ; DAC + DCD COMP_IRQHandler ; COMP through EXTI Line + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD LCD_IRQHandler ; LCD + DCD TIM9_IRQHandler ; TIM9 + DCD TIM10_IRQHandler ; TIM10 + DCD TIM11_IRQHandler ; TIM11 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD AES_IRQHandler ; AES + DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT DAC_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT TIM9_IRQHandler [WEAK] + EXPORT TIM10_IRQHandler [WEAK] + EXPORT TIM11_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USB_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT AES_IRQHandler [WEAK] + EXPORT COMP_ACQ_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +DAC_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +LCD_IRQHandler +TIM9_IRQHandler +TIM10_IRQHandler +TIM11_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USB_FS_WKUP_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +AES_IRQHandler +COMP_ACQ_IRQHandler + + B . + + ENDP + + ALIGN + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_ARM_MICRO/stm32l151rc.sct Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2015, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32L151RC: 256KB FLASH + 32KB SRAM
+LR_IROM1 0x08000000 0x40000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 73 vectors = 292 bytes (0x124) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x124) (0x8000-0x124) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_ARM_MICRO/sys.cpp Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_ARM_STD/startup_stm32l151xc.S Thu Feb 18 10:00:10 2016 +0000 @@ -0,0 +1,296 @@ +; STM32L151RC Ultra Low Power High-density Devices vector table for MDK ARM_STD toolchain +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2015, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +__initial_sp EQU 0x2008000 ; Top of RAM (32 KB) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp + DCD RTC_WKUP_IRQHandler ; RTC Wakeup + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD DAC_IRQHandler ; DAC + DCD COMP_IRQHandler ; COMP through EXTI Line + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD LCD_IRQHandler ; LCD + DCD TIM9_IRQHandler ; TIM9 + DCD TIM10_IRQHandler ; TIM10 + DCD TIM11_IRQHandler ; TIM11 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD AES_IRQHandler ; AES + DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT DAC_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT TIM9_IRQHandler [WEAK] + EXPORT TIM10_IRQHandler [WEAK] + EXPORT TIM11_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USB_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT AES_IRQHandler [WEAK] + EXPORT COMP_ACQ_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +DAC_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +LCD_IRQHandler +TIM9_IRQHandler +TIM10_IRQHandler +TIM11_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USB_FS_WKUP_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +AES_IRQHandler +COMP_ACQ_IRQHandler + + B . + + ENDP + + ALIGN + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_ARM_STD/stm32l151rc.sct Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2015, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32L151RC: 256KB FLASH + 32KB SRAM
+LR_IROM1 0x08000000 0x40000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 73 vectors = 292 bytes (0x124) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x124) (0x8000-0x124) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_ARM_STD/sys.cpp Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model,
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+ uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+ uint32_t sp_limit = __current_sp();
+
+ zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
+
+ struct __initial_stackheap r;
+ r.heap_base = zi_limit;
+ r.heap_limit = sp_limit;
+ return r;
+}
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_GCC_ARM/STM32L151XC.ld Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,157 @@
+/* Linker script to configure memory regions. */
+
+MEMORY
+{
+ /* 256KB FLASH, 32KB RAM, Reserve up till 0x13C. There are 0x73 vectors = 292
+ * bytes (0x124) in RAM. But all GCC scripts seem to require BootRAM @0x138
+ */
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256k
+ RAM (rwx) : ORIGIN = 0x2000013C, LENGTH = 0x8000-0x13C
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/TOOLCHAIN_GCC_ARM/startup_stm32l151xc.S Thu Feb 18 10:00:10 2016 +0000 @@ -0,0 +1,418 @@ +/** + ****************************************************************************** + * @file startup_stm32l151xc.s + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief STM32L151XC Devices vector table for + * Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word DAC_IRQHandler + .word COMP_IRQHandler + .word EXTI9_5_IRQHandler + .word 0 + .word TIM9_IRQHandler + .word TIM10_IRQHandler + .word TIM11_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word USB_FS_WKUP_IRQHandler + .word TIM6_IRQHandler + .word TIM7_IRQHandler + .word 0 + .word TIM5_IRQHandler + .word SPI3_IRQHandler + .word 0 + .word 0 + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word 0 + .word COMP_ACQ_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32L151XC devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_STAMP_IRQHandler + .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak DAC_IRQHandler + .thumb_set DAC_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM9_IRQHandler + .thumb_set TIM9_IRQHandler,Default_Handler + + .weak TIM10_IRQHandler + .thumb_set TIM10_IRQHandler,Default_Handler + + .weak TIM11_IRQHandler + .thumb_set TIM11_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak USB_FS_WKUP_IRQHandler + .thumb_set USB_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM6_IRQHandler + .thumb_set TIM6_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak COMP_ACQ_IRQHandler + .thumb_set COMP_ACQ_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/cmsis.h Thu Feb 18 10:00:10 2016 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32l1xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/cmsis_nvic.c Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+ uint32_t *vectors = (uint32_t *)SCB->VTOR;
+ uint32_t i;
+
+ // Copy and switch to dynamic vectors if the first time called
+ if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+ uint32_t *old_vectors = vectors;
+ vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+ for (i=0; i<NVIC_NUM_VECTORS; i++) {
+ vectors[i] = old_vectors[i];
+ }
+ SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+ }
+ vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+ uint32_t *vectors = (uint32_t*)SCB->VTOR;
+ return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/cmsis_nvic.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32L151RC
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 57 vectors = 228 bytes from 0x40 to 0x123
+// Total: 73 vectors = 292 bytes (0x124) to be reserved in RAM
+#define NVIC_NUM_VECTORS 73
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/hal_tick.c Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,121 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.c
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#include "hal_tick.h"
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+ // Channel 1 for mbed timeout
+ if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) {
+ us_ticker_irq_handler();
+ }
+
+ // Channel 2 for HAL tick
+ if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) {
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+ uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+ if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+ // Increment HAL variable
+ HAL_IncTick();
+ // Prepare next interrupt
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+ PreviousVal = val;
+#if 0 // For DEBUG only
+ HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
+#endif
+ }
+ }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+ // Enable timer clock
+ TIM_MST_RCC;
+
+ // Reset timer
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ // Configure time base
+ TimMasterHandle.Instance = TIM_MST;
+ TimMasterHandle.Init.Period = 0xFFFFFFFF;
+ TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
+ TimMasterHandle.Init.ClockDivision = 0;
+ TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ HAL_TIM_OC_Init(&TimMasterHandle);
+
+ NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+ NVIC_EnableIRQ(TIM_MST_IRQ);
+
+ // Channel 1 for mbed timeout
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+ // Channel 2 for HAL tick
+ HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+ PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if 0 // For DEBUG only
+ __GPIOB_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct;
+ GPIO_InitStruct.Pin = GPIO_PIN_6;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#endif
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/hal_tick.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32l1xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/stm32l151xc.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,5701 @@
+/**
+ ******************************************************************************
+ * @file stm32l151xc.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 5-September-2014
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for STM32L1xx devices.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l151xc
+ * @{
+ */
+
+#ifndef __STM32L151xC_H
+#define __STM32L151xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+ /** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */
+#define __MPU_PRESENT 1 /*!< STM32L1xx provides MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32L1xx uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32L1xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+
+ /*!< Interrupt Number Definition */
+typedef enum
+{
+/****** Cortex-M3 Processor Exceptions Numbers ******************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** STM32L specific Interrupt Numbers ***********************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */
+ USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */
+ DAC_IRQn = 21, /*!< DAC Interrupt */
+ COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM9_IRQn = 25, /*!< TIM9 global Interrupt */
+ TIM10_IRQn = 26, /*!< TIM10 global Interrupt */
+ TIM11_IRQn = 27, /*!< TIM11 global Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */
+ TIM6_IRQn = 43, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 44, /*!< TIM7 global Interrupt */
+ TIM5_IRQn = 46, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 47, /*!< SPI3 global Interrupt */
+ DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */
+ COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32l1xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */
+ uint32_t RESERVED; /*!< Reserved, Address offset: 0x5C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Comparator
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!< Access control register, Address offset: 0x00 */
+ __IO uint32_t PECR; /*!< Program/erase control register, Address offset: 0x04 */
+ __IO uint32_t PDKEYR; /*!< Power down key register, Address offset: 0x08 */
+ __IO uint32_t PEKEYR; /*!< Program/erase key register, Address offset: 0x0c */
+ __IO uint32_t PRGKEYR; /*!< Program memory key register, Address offset: 0x10 */
+ __IO uint32_t OPTKEYR; /*!< Option byte key register, Address offset: 0x14 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x18 */
+ __IO uint32_t OBR; /*!< Option byte register, Address offset: 0x1c */
+ __IO uint32_t WRPR1; /*!< Write protection register 1, Address offset: 0x20 */
+ uint32_t RESERVED[23]; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t WRPR2; /*!< Write protection register 2, Address offset: 0x80 */
+} FLASH_TypeDef;
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint32_t RDP; /*!< Read protection register, Address offset: 0x00 */
+ __IO uint32_t USER; /*!< user register, Address offset: 0x04 */
+ __IO uint32_t WRP01; /*!< write protection register 0 1, Address offset: 0x08 */
+ __IO uint32_t WRP23; /*!< write protection register 2 3, Address offset: 0x0C */
+ __IO uint32_t WRP45; /*!< write protection register 4 5, Address offset: 0x10 */
+ __IO uint32_t WRP67; /*!< write protection register 6 7, Address offset: 0x14 */
+} OB_TypeDef;
+
+/**
+ * @brief Operational Amplifier (OPAMP)
+ */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */
+ __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */
+ __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */
+} OPAMP_TypeDef;
+
+/**
+ * @brief General Purpose IO
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset registerBSRR, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+} GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC Clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x18 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x20 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x24 */
+ __IO uint32_t AHBLPENR; /*!< RCC AHB peripheral clock enable in low power mode register, Address offset: 0x28 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x2C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x30 */
+ __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x34 */
+} RCC_TypeDef;
+
+/**
+ * @brief Routing Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t ICR; /*!< RI input capture register, Address offset: 0x00 */
+ __IO uint32_t ASCR1; /*!< RI analog switches control register, Address offset: 0x04 */
+ __IO uint32_t ASCR2; /*!< RI analog switch control register 2, Address offset: 0x08 */
+ __IO uint32_t HYSCR1; /*!< RI hysteresis control register, Address offset: 0x0C */
+ __IO uint32_t HYSCR2; /*!< RI Hysteresis control register, Address offset: 0x10 */
+ __IO uint32_t HYSCR3; /*!< RI Hysteresis control register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ __IO uint32_t ASMR1; /*!< RI Analog switch mode register 1, Address offset: 0x1C */
+ __IO uint32_t CMR1; /*!< RI Channel mask register 1, Address offset: 0x20 */
+ __IO uint32_t CICR1; /*!< RI Channel Iden for capture register 1, Address offset: 0x24 */
+ __IO uint32_t ASMR2; /*!< RI Analog switch mode register 2, Address offset: 0x28 */
+ __IO uint32_t CMR2; /*!< RI Channel mask register 2, Address offset: 0x2C */
+ __IO uint32_t CICR2; /*!< RI Channel Iden for capture register 2, Address offset: 0x30 */
+ __IO uint32_t ASMR3; /*!< RI Analog switch mode register 3, Address offset: 0x34 */
+ __IO uint32_t CMR3; /*!< RI Channel mask register 3, Address offset: 0x38 */
+ __IO uint32_t CICR3; /*!< RI Channel Iden for capture register 3, Address offset: 0x3C */
+} RI_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RRTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */
+ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */
+ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */
+ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */
+ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */
+ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */
+ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */
+ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */
+ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */
+ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */
+ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */
+ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */
+} RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ uint32_t RESERVED12; /*!< Reserved, 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ uint32_t RESERVED17; /*!< Reserved, 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+} USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define FLASH_EEPROM_BASE ((uint32_t)(FLASH_BASE + 0x80000)) /*!< FLASH EEPROM base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define FLASH_END ((uint32_t)0x0803FFFF) /*!< Program end FLASH address for Cat3 */
+#define FLASH_EEPROM_END ((uint32_t)0x08081FFF) /*!< FLASH EEPROM end address (8KB) */
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400)
+#define RTC_BASE (APB1PERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00)
+#define USART2_BASE (APB1PERIPH_BASE + 0x00004400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x00004800)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800)
+
+/* USB device FS */
+#define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+
+/* USB device FS SRAM */
+#define PWR_BASE (APB1PERIPH_BASE + 0x00007000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x00007400)
+#define COMP_BASE (APB1PERIPH_BASE + 0x00007C00)
+#define RI_BASE (APB1PERIPH_BASE + 0x00007C04)
+#define OPAMP_BASE (APB1PERIPH_BASE + 0x00007C5C)
+
+/*!< APB2 peripherals */
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x00000800)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x00000C00)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x00001000)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400)
+#define ADC_BASE (APB2PERIPH_BASE + 0x00002700)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000)
+#define USART1_BASE (APB2PERIPH_BASE + 0x00003800)
+
+/*!< AHB peripherals */
+#define GPIOA_BASE (AHBPERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHBPERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHBPERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHBPERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHBPERIPH_BASE + 0x00001000)
+#define GPIOH_BASE (AHBPERIPH_BASE + 0x00001400)
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+#define RCC_BASE (AHBPERIPH_BASE + 0x00003800)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00003C00) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FF80000) /*!< FLASH Option Bytes base address */
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00006000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080)
+#define DMA2_BASE (AHBPERIPH_BASE + 0x00006400)
+#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008)
+#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001C)
+#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030)
+#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044)
+#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058)
+#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+/* USB device FS */
+#define USB ((USB_TypeDef *) USB_BASE)
+/* USB device FS SRAM */
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define COMP ((COMP_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP_BASE)
+#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000001))
+#define RI ((RI_TypeDef *) RI_BASE)
+#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
+#define OPAMP1 ((OPAMP_TypeDef *) OPAMP_BASE)
+#define OPAMP2 ((OPAMP_TypeDef *) (OPAMP_BASE + 0x00000001))
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+ /**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+/** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!< Analog watchdog flag */
+#define ADC_SR_EOC ((uint32_t)0x00000002) /*!< End of conversion */
+#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!< Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!< Injected channel Start flag */
+#define ADC_SR_STRT ((uint32_t)0x00000010) /*!< Regular channel Start flag */
+#define ADC_SR_OVR ((uint32_t)0x00000020) /*!< Overrun flag */
+#define ADC_SR_ADONS ((uint32_t)0x00000040) /*!< ADC ON status */
+#define ADC_SR_RCNR ((uint32_t)0x00000100) /*!< Regular channel not ready flag */
+#define ADC_SR_JCNR ((uint32_t)0x00000200) /*!< Injected channel not ready flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */
+
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define ADC_CR1_PDD ((uint32_t)0x00010000) /*!< Power Down during Delay phase */
+#define ADC_CR1_PDI ((uint32_t)0x00020000) /*!< Power Down during Idle phase */
+
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!< Overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */
+#define ADC_CR2_CFG ((uint32_t)0x00000004) /*!< ADC Configuration */
+
+#define ADC_CR2_DELS ((uint32_t)0x00000070) /*!< DELS[2:0] bits (Delay selection) */
+#define ADC_CR2_DELS_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define ADC_CR2_DELS_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define ADC_CR2_DELS_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!< DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!< End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */
+
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!< JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!< JEXTEN[1:0] bits (External Trigger Conversion mode for injected channels) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!< Start Conversion of injected channels */
+
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!< EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!< Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP20 ((uint32_t)0x00000007) /*!< SMP20[2:0] bits (Channel 20 Sample time selection) */
+#define ADC_SMPR1_SMP20_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR1_SMP20_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR1_SMP20_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP21 ((uint32_t)0x00000038) /*!< SMP21[2:0] bits (Channel 21 Sample time selection) */
+#define ADC_SMPR1_SMP21_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_SMPR1_SMP21_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_SMPR1_SMP21_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP22 ((uint32_t)0x000001C0) /*!< SMP22[2:0] bits (Channel 22 Sample time selection) */
+#define ADC_SMPR1_SMP22_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_SMPR1_SMP22_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_SMPR1_SMP22_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP23 ((uint32_t)0x00000E00) /*!< SMP23[2:0] bits (Channel 23 Sample time selection) */
+#define ADC_SMPR1_SMP23_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define ADC_SMPR1_SMP23_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define ADC_SMPR1_SMP23_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP24 ((uint32_t)0x00007000) /*!< SMP24[2:0] bits (Channel 24 Sample time selection) */
+#define ADC_SMPR1_SMP24_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP24_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP24_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP25 ((uint32_t)0x00038000) /*!< SMP25[2:0] bits (Channel 25 Sample time selection) */
+#define ADC_SMPR1_SMP25_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP25_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP25_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP26 ((uint32_t)0x001C0000) /*!< SMP26[2:0] bits (Channel 26 Sample time selection) */
+#define ADC_SMPR1_SMP26_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP26_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP26_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP27 ((uint32_t)0x00E00000) /*!< SMP27[2:0] bits (Channel 27 Sample time selection) */
+#define ADC_SMPR1_SMP27_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP27_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP27_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP28 ((uint32_t)0x07000000) /*!< SMP28[2:0] bits (Channel 28 Sample time selection) */
+#define ADC_SMPR1_SMP28_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP28_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP28_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP29 ((uint32_t)0x38000000) /*!< SMP29[2:0] bits (Channel 29 Sample time selection) */
+#define ADC_SMPR1_SMP29_0 ((uint32_t)0x08000000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP29_1 ((uint32_t)0x10000000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP29_2 ((uint32_t)0x20000000) /*!< Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP19 ((uint32_t)0x38000000) /*!< SMP19[2:0] bits (Channel 19 Sample time selection) */
+#define ADC_SMPR2_SMP19_0 ((uint32_t)0x08000000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP19_1 ((uint32_t)0x10000000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP19_2 ((uint32_t)0x20000000) /*!< Bit 2 */
+
+/****************** Bit definition for ADC_SMPR3 register *******************/
+#define ADC_SMPR3_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR3_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR3_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR3_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR3_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_SMPR3_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_SMPR3_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR3_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_SMPR3_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_SMPR3_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR3_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define ADC_SMPR3_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define ADC_SMPR3_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR3_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define ADC_SMPR3_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define ADC_SMPR3_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR3_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SMPR3_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SMPR3_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR3_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define ADC_SMPR3_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define ADC_SMPR3_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR3_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define ADC_SMPR3_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define ADC_SMPR3_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR3_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_SMPR3_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define ADC_SMPR3_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR3_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */
+#define ADC_SMPR3_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */
+#define ADC_SMPR3_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint32_t)0x00000FFF) /*!< Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_L ((uint32_t)0x01F00000) /*!< L[4:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR1_L_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ28 ((uint32_t)0x000F8000) /*!< SQ28[4:0] bits (25th conversion in regular sequence) */
+#define ADC_SQR1_SQ28_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR1_SQ28_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR1_SQ28_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR1_SQ28_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR1_SQ28_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ27 ((uint32_t)0x00007C00) /*!< SQ27[4:0] bits (27th conversion in regular sequence) */
+#define ADC_SQR1_SQ27_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR1_SQ27_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR1_SQ27_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR1_SQ27_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR1_SQ27_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */
+#define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */
+#define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ19 ((uint32_t)0x0000001F) /*!< SQ19[4:0] bits (19th conversion in regular sequence) */
+#define ADC_SQR2_SQ19_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR2_SQ19_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR2_SQ19_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR2_SQ19_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR2_SQ19_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ20 ((uint32_t)0x000003E0) /*!< SQ20[4:0] bits (20th conversion in regular sequence) */
+#define ADC_SQR2_SQ20_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR2_SQ20_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR2_SQ20_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR2_SQ20_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR2_SQ20_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ21 ((uint32_t)0x00007C00) /*!< SQ21[4:0] bits (21th conversion in regular sequence) */
+#define ADC_SQR2_SQ21_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR2_SQ21_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR2_SQ21_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR2_SQ21_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR2_SQ21_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ22 ((uint32_t)0x000F8000) /*!< SQ22[4:0] bits (22th conversion in regular sequence) */
+#define ADC_SQR2_SQ22_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR2_SQ22_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR2_SQ22_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR2_SQ22_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR2_SQ22_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ23 ((uint32_t)0x01F00000) /*!< SQ23[4:0] bits (23th conversion in regular sequence) */
+#define ADC_SQR2_SQ23_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR2_SQ23_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR2_SQ23_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR2_SQ23_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR2_SQ23_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ24 ((uint32_t)0x3E000000) /*!< SQ24[4:0] bits (24th conversion in regular sequence) */
+#define ADC_SQR2_SQ24_0 ((uint32_t)0x02000000) /*!< Bit 0 */
+#define ADC_SQR2_SQ24_1 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define ADC_SQR2_SQ24_2 ((uint32_t)0x08000000) /*!< Bit 2 */
+#define ADC_SQR2_SQ24_3 ((uint32_t)0x10000000) /*!< Bit 3 */
+#define ADC_SQR2_SQ24_4 ((uint32_t)0x20000000) /*!< Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR3_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR3_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR3_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR3_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR3_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR3_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR3_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR3_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR3_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR3_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR3_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR3_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR3_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR3_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR3_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR3_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR3_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR3_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR3_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR3_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ17 ((uint32_t)0x01F00000) /*!< SQ17[4:0] bits (17th conversion in regular sequence) */
+#define ADC_SQR3_SQ17_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR3_SQ17_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR3_SQ17_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR3_SQ17_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR3_SQ17_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ18 ((uint32_t)0x3E000000) /*!< SQ18[4:0] bits (18th conversion in regular sequence) */
+#define ADC_SQR3_SQ18_0 ((uint32_t)0x02000000) /*!< Bit 0 */
+#define ADC_SQR3_SQ18_1 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define ADC_SQR3_SQ18_2 ((uint32_t)0x08000000) /*!< Bit 2 */
+#define ADC_SQR3_SQ18_3 ((uint32_t)0x10000000) /*!< Bit 3 */
+#define ADC_SQR3_SQ18_4 ((uint32_t)0x20000000) /*!< Bit 4 */
+
+/******************* Bit definition for ADC_SQR4 register *******************/
+#define ADC_SQR4_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR4_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR4_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR4_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR4_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR4_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR4_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR4_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR4_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR4_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR4_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR4_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR4_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR4_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR4_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR4_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR4_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR4_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR4_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR4_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR4_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR4_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR4_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR4_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR4_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR4_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR4_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR4_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR4_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR4_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR4_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR4_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */
+#define ADC_SQR4_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define ADC_SQR4_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */
+#define ADC_SQR4_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */
+#define ADC_SQR4_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */
+
+/******************* Bit definition for ADC_SQR5 register *******************/
+#define ADC_SQR5_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR5_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR5_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR5_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR5_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR5_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR5_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR5_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR5_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR5_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR5_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR5_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR5_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR5_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR5_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR5_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR5_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR5_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR5_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR5_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR5_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR5_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR5_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR5_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR5_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR5_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR5_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR5_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR5_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR5_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR5_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR5_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */
+#define ADC_SQR5_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define ADC_SQR5_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */
+#define ADC_SQR5_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */
+#define ADC_SQR5_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */
+
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!< ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!< ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!< ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!< ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!< ADC1 Regular channel Start flag */
+#define ADC_CSR_OVR1 ((uint32_t)0x00000020) /*!< ADC1 overrun flag */
+#define ADC_CSR_ADONS1 ((uint32_t)0x00000040) /*!< ADON status of ADC1 */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!< ADC prescaler*/
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+
+/****************** Bit definition for COMP_CSR register ********************/
+#define COMP_CSR_10KPU ((uint32_t)0x00000001) /*!< 10K pull-up resistor */
+#define COMP_CSR_400KPU ((uint32_t)0x00000002) /*!< 400K pull-up resistor */
+#define COMP_CSR_10KPD ((uint32_t)0x00000004) /*!< 10K pull-down resistor */
+#define COMP_CSR_400KPD ((uint32_t)0x00000008) /*!< 400K pull-down resistor */
+#define COMP_CSR_CMP1EN ((uint32_t)0x00000010) /*!< Comparator 1 enable */
+#define COMP_CSR_CMP1OUT ((uint32_t)0x00000080) /*!< Comparator 1 output */
+
+#define COMP_CSR_SPEED ((uint32_t)0x00001000) /*!< Comparator 2 speed */
+#define COMP_CSR_CMP2OUT ((uint32_t)0x00002000) /*!< Comparator 2 ouput */
+#define COMP_CSR_VREFOUTEN ((uint32_t)0x00010000) /*!< Comparator Vref Enable */
+#define COMP_CSR_WNDWE ((uint32_t)0x00020000) /*!< Window mode enable */
+#define COMP_CSR_INSEL ((uint32_t)0x001C0000) /*!< INSEL[2:0] Inversion input Selection */
+#define COMP_CSR_INSEL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define COMP_CSR_INSEL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define COMP_CSR_INSEL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define COMP_CSR_OUTSEL ((uint32_t)0x00E00000) /*!< OUTSEL[2:0] comparator 2 output redirection */
+#define COMP_CSR_OUTSEL_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define COMP_CSR_OUTSEL_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define COMP_CSR_OUTSEL_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+#define COMP_CSR_FCH3 ((uint32_t)0x04000000) /*!< Bit 26 */
+#define COMP_CSR_FCH8 ((uint32_t)0x08000000) /*!< Bit 27 */
+#define COMP_CSR_RCH13 ((uint32_t)0x10000000) /*!< Bit 28 */
+
+#define COMP_CSR_CAIE ((uint32_t)0x20000000) /*!< Bit 29 */
+#define COMP_CSR_CAIF ((uint32_t)0x40000000) /*!< Bit 30 */
+#define COMP_CSR_TSUSP ((uint32_t)0x80000000) /*!< Bit 31 */
+
+/******************************************************************************/
+/* */
+/* Operational Amplifier (OPAMP) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for OPAMP_CSR register ******************/
+#define OPAMP_CSR_OPA1PD ((uint32_t)0x00000001) /*!< OPAMP1 disable */
+#define OPAMP_CSR_S3SEL1 ((uint32_t)0x00000002) /*!< Switch 3 for OPAMP1 Enable */
+#define OPAMP_CSR_S4SEL1 ((uint32_t)0x00000004) /*!< Switch 4 for OPAMP1 Enable */
+#define OPAMP_CSR_S5SEL1 ((uint32_t)0x00000008) /*!< Switch 5 for OPAMP1 Enable */
+#define OPAMP_CSR_S6SEL1 ((uint32_t)0x00000010) /*!< Switch 6 for OPAMP1 Enable */
+#define OPAMP_CSR_OPA1CAL_L ((uint32_t)0x00000020) /*!< OPAMP1 Offset calibration for P differential pair */
+#define OPAMP_CSR_OPA1CAL_H ((uint32_t)0x00000040) /*!< OPAMP1 Offset calibration for N differential pair */
+#define OPAMP_CSR_OPA1LPM ((uint32_t)0x00000080) /*!< OPAMP1 Low power enable */
+#define OPAMP_CSR_OPA2PD ((uint32_t)0x00000100) /*!< OPAMP2 disable */
+#define OPAMP_CSR_S3SEL2 ((uint32_t)0x00000200) /*!< Switch 3 for OPAMP2 Enable */
+#define OPAMP_CSR_S4SEL2 ((uint32_t)0x00000400) /*!< Switch 4 for OPAMP2 Enable */
+#define OPAMP_CSR_S5SEL2 ((uint32_t)0x00000800) /*!< Switch 5 for OPAMP2 Enable */
+#define OPAMP_CSR_S6SEL2 ((uint32_t)0x00001000) /*!< Switch 6 for OPAMP2 Enable */
+#define OPAMP_CSR_OPA2CAL_L ((uint32_t)0x00002000) /*!< OPAMP2 Offset calibration for P differential pair */
+#define OPAMP_CSR_OPA2CAL_H ((uint32_t)0x00004000) /*!< OPAMP2 Offset calibration for N differential pair */
+#define OPAMP_CSR_OPA2LPM ((uint32_t)0x00008000) /*!< OPAMP2 Low power enable */
+#define OPAMP_CSR_ANAWSEL1 ((uint32_t)0x01000000) /*!< Switch ANA Enable for OPAMP1 */
+#define OPAMP_CSR_ANAWSEL2 ((uint32_t)0x02000000) /*!< Switch ANA Enable for OPAMP2 */
+#define OPAMP_CSR_S7SEL2 ((uint32_t)0x08000000) /*!< Switch 7 for OPAMP2 Enable */
+#define OPAMP_CSR_AOP_RANGE ((uint32_t)0x10000000) /*!< Power range selection */
+#define OPAMP_CSR_OPA1CALOUT ((uint32_t)0x20000000) /*!< OPAMP1 calibration output */
+#define OPAMP_CSR_OPA2CALOUT ((uint32_t)0x40000000) /*!< OPAMP2 calibration output */
+
+/******************* Bit definition for OPAMP_OTR register ******************/
+#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */
+#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */
+#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */
+#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */
+#define OPAMP_OTR_OT_USER ((uint32_t)0x80000000) /*!< Switch to OPAMP offset user trimmed values */
+
+/******************* Bit definition for OPAMP_LPOTR register ****************/
+#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */
+#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */
+#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */
+#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0x000000FF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!<DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!<DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!<DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA Interrupt enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!<Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!<Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!<Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun interrupt enable */
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!<DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!<DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!<DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!<DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!<DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!<DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!<DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint_t)0x00000FFF) /*!<DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004) /*!< TIM4 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008) /*!< TIM5 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Counter stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) /*!< SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00000004) /*!< TIM9 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00000008) /*!< TIM10 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00000010) /*!< TIM11 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register *******************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable*/
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level) */
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR1 register ******************/
+#define DMA_CNDTR1_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR2 register ******************/
+#define DMA_CNDTR2_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR3 register ******************/
+#define DMA_CNDTR3_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR4 register ******************/
+#define DMA_CNDTR4_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR5 register ******************/
+#define DMA_CNDTR5_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR6 register ******************/
+#define DMA_CNDTR6_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR7 register ******************/
+#define DMA_CNDTR7_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR1 register *******************/
+#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR2 register *******************/
+#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR3 register *******************/
+#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+
+/****************** Bit definition for DMA_CPAR4 register *******************/
+#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR5 register *******************/
+#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR6 register *******************/
+#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+
+/****************** Bit definition for DMA_CPAR7 register *******************/
+#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR1 register *******************/
+#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR2 register *******************/
+#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR3 register *******************/
+#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+
+/****************** Bit definition for DMA_CMAR4 register *******************/
+#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR5 register *******************/
+#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR6 register *******************/
+#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR7 register *******************/
+#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit 23 */
+
+/******************************************************************************/
+/* */
+/* FLASH, DATA EEPROM and Option Bytes Registers */
+/* (FLASH, DATA_EEPROM, OB) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< Latency */
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000002) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_ACC64 ((uint32_t)0x00000004) /*!< Access 64 bits */
+#define FLASH_ACR_SLEEP_PD ((uint32_t)0x00000008) /*!< Flash mode during sleep mode */
+#define FLASH_ACR_RUN_PD ((uint32_t)0x00000010) /*!< Flash mode during RUN mode */
+
+/******************* Bit definition for FLASH_PECR register ******************/
+#define FLASH_PECR_PELOCK ((uint32_t)0x00000001) /*!< FLASH_PECR and Flash data Lock */
+#define FLASH_PECR_PRGLOCK ((uint32_t)0x00000002) /*!< Program matrix Lock */
+#define FLASH_PECR_OPTLOCK ((uint32_t)0x00000004) /*!< Option byte matrix Lock */
+#define FLASH_PECR_PROG ((uint32_t)0x00000008) /*!< Program matrix selection */
+#define FLASH_PECR_DATA ((uint32_t)0x00000010) /*!< Data matrix selection */
+#define FLASH_PECR_FTDW ((uint32_t)0x00000100) /*!< Fixed Time Data write for Word/Half Word/Byte programming */
+#define FLASH_PECR_ERASE ((uint32_t)0x00000200) /*!< Page erasing mode */
+#define FLASH_PECR_FPRG ((uint32_t)0x00000400) /*!< Fast Page/Half Page programming mode */
+#define FLASH_PECR_EOPIE ((uint32_t)0x00010000) /*!< End of programming interrupt */
+#define FLASH_PECR_ERRIE ((uint32_t)0x00020000) /*!< Error interrupt */
+#define FLASH_PECR_OBL_LAUNCH ((uint32_t)0x00040000) /*!< Launch the option byte loading */
+
+/****************** Bit definition for FLASH_PDKEYR register ******************/
+#define FLASH_PDKEYR_PDKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */
+
+/****************** Bit definition for FLASH_PEKEYR register ******************/
+#define FLASH_PEKEYR_PEKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */
+
+/****************** Bit definition for FLASH_PRGKEYR register ******************/
+#define FLASH_PRGKEYR_PRGKEYR ((uint32_t)0xFFFFFFFF) /*!< Program matrix Key */
+
+/****************** Bit definition for FLASH_OPTKEYR register ******************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option bytes matrix Key */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_EOP ((uint32_t)0x00000002) /*!< End Of Programming*/
+#define FLASH_SR_ENDHV ((uint32_t)0x00000004) /*!< End of high voltage */
+#define FLASH_SR_READY ((uint32_t)0x00000008) /*!< Flash ready after low power mode */
+
+#define FLASH_SR_WRPERR ((uint32_t)0x00000100) /*!< Write protected error */
+#define FLASH_SR_PGAERR ((uint32_t)0x00000200) /*!< Programming Alignment Error */
+#define FLASH_SR_SIZERR ((uint32_t)0x00000400) /*!< Size error */
+#define FLASH_SR_OPTVERR ((uint32_t)0x00000800) /*!< Option validity error */
+#define FLASH_SR_OPTVERRUSR ((uint32_t)0x00001000) /*!< Option User validity error */
+#define FLASH_SR_RDERR ((uint32_t)0x00002000) /*!< Read protected error */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_RDPRT ((uint32_t)0x000000FF) /*!< Read Protection */
+#define FLASH_OBR_SPRMOD ((uint32_t)0x00000100) /*!< Selection of protection mode of WPRi bits */
+#define FLASH_OBR_BOR_LEV ((uint32_t)0x000F0000) /*!< BOR_LEV[3:0] Brown Out Reset Threshold Level*/
+#define FLASH_OBR_USER ((uint32_t)0x00700000) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00100000) /*!< IWDG_SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00200000) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00400000) /*!< nRST_STDBY */
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR1_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+#define FLASH_WRPR2_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!< SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!< SMBus Type */
+#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!< ARP Enable */
+#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!< PEC Enable */
+#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!< General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!< Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint32_t)0x00000100) /*!< Start Generation */
+#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!< Stop Generation */
+#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!< Acknowledge Enable */
+#define I2C_CR1_POS ((uint32_t)0x00000800) /*!< Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!< Packet Error Checking */
+#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!< SMBus Alert */
+#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!< Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!< Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!< Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!< Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!< DMA Requests Enable */
+#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!< DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!< Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!< Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!< Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!< Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!< Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!< Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint32_t)0x000000FF) /*!< 8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint32_t)0x00000001) /*!< Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!< Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!< Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!< 10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!< Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!< Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!< Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!< Bus Error */
+#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!< Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint32_t)0x00000400) /*!< Acknowledge Failure */
+#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!< Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!< PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!< Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!< SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!< Master/Slave */
+#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!< Bus Busy */
+#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!< Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!< General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!< SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!< SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!< Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!< Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!< Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint32_t)0x00008000) /*!< I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0x0000FFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x00000007) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x00000FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x00000001) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x00000002) /*!< Watchdog counter reload value update */
+
+/******************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPSDSR ((uint32_t)0x00000001) /*!< Low-power deepsleep/sleep/low power run */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_ULP ((uint32_t)0x00000200) /*!< Ultra Low Power mode */
+#define PWR_CR_FWU ((uint32_t)0x00000400) /*!< Fast wakeup */
+
+#define PWR_CR_VOS ((uint32_t)0x00001800) /*!< VOS[1:0] bits (Voltage scaling range selection) */
+#define PWR_CR_VOS_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define PWR_CR_VOS_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+#define PWR_CR_LPRUN ((uint32_t)0x00004000) /*!< Low power run mode */
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+#define PWR_CSR_VOSF ((uint32_t)0x00000010) /*!< Voltage Scaling select flag */
+#define PWR_CSR_REGLPF ((uint32_t)0x00000020) /*!< Regulator LP flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control (RCC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_MSION ((uint32_t)0x00000100) /*!< Internal Multi Speed clock enable */
+#define RCC_CR_MSIRDY ((uint32_t)0x00000200) /*!< Internal Multi Speed clock ready flag */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+#define RCC_CR_CSSON ((uint32_t)0x10000000) /*!< Clock Security System enable */
+
+#define RCC_CR_RTCPRE ((uint32_t)0x60000000) /*!< RTC Prescaler */
+#define RCC_CR_RTCPRE_0 ((uint32_t)0x20000000) /*!< Bit0 */
+#define RCC_CR_RTCPRE_1 ((uint32_t)0x40000000) /*!< Bit1 */
+
+/******************** Bit definition for RCC_ICSCR register *****************/
+#define RCC_ICSCR_HSICAL ((uint32_t)0x000000FF) /*!< Internal High Speed clock Calibration */
+#define RCC_ICSCR_HSITRIM ((uint32_t)0x00001F00) /*!< Internal High Speed clock trimming */
+
+#define RCC_ICSCR_MSIRANGE ((uint32_t)0x0000E000) /*!< Internal Multi Speed clock Range */
+#define RCC_ICSCR_MSIRANGE_0 ((uint32_t)0x00000000) /*!< Internal Multi Speed clock Range 65.536 KHz */
+#define RCC_ICSCR_MSIRANGE_1 ((uint32_t)0x00002000) /*!< Internal Multi Speed clock Range 131.072 KHz */
+#define RCC_ICSCR_MSIRANGE_2 ((uint32_t)0x00004000) /*!< Internal Multi Speed clock Range 262.144 KHz */
+#define RCC_ICSCR_MSIRANGE_3 ((uint32_t)0x00006000) /*!< Internal Multi Speed clock Range 524.288 KHz */
+#define RCC_ICSCR_MSIRANGE_4 ((uint32_t)0x00008000) /*!< Internal Multi Speed clock Range 1.048 MHz */
+#define RCC_ICSCR_MSIRANGE_5 ((uint32_t)0x0000A000) /*!< Internal Multi Speed clock Range 2.097 MHz */
+#define RCC_ICSCR_MSIRANGE_6 ((uint32_t)0x0000C000) /*!< Internal Multi Speed clock Range 4.194 MHz */
+#define RCC_ICSCR_MSICAL ((uint32_t)0x00FF0000) /*!< Internal Multi Speed clock Calibration */
+#define RCC_ICSCR_MSITRIM ((uint32_t)0xFF000000) /*!< Internal Multi Speed clock trimming */
+
+/******************** Bit definition for RCC_CFGR register ******************/
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+/*!< SW configuration */
+#define RCC_CFGR_SW_MSI ((uint32_t)0x00000000) /*!< MSI selected as system clock */
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000001) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000002) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000003) /*!< PLL selected as system clock */
+
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS_MSI ((uint32_t)0x00000000) /*!< MSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000004) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000008) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x0000000C) /*!< PLL used as system clock */
+
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
+
+/*!< PLL entry clock source*/
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+
+#define RCC_CFGR_PLLSRC_HSI ((uint32_t)0x00000000) /*!< HSI as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE as PLL entry clock source */
+
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00000000) /*!< PLL input clock * 3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00040000) /*!< PLL input clock * 4 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00080000) /*!< PLL input clock * 6 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x000C0000) /*!< PLL input clock * 8 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00100000) /*!< PLL input clock * 12 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00140000) /*!< PLL input clock * 16 */
+#define RCC_CFGR_PLLMUL24 ((uint32_t)0x00180000) /*!< PLL input clock * 24 */
+#define RCC_CFGR_PLLMUL32 ((uint32_t)0x001C0000) /*!< PLL input clock * 32 */
+#define RCC_CFGR_PLLMUL48 ((uint32_t)0x00200000) /*!< PLL input clock * 48 */
+
+/*!< PLLDIV configuration */
+#define RCC_CFGR_PLLDIV ((uint32_t)0x00C00000) /*!< PLLDIV[1:0] bits (PLL Output Division) */
+#define RCC_CFGR_PLLDIV_0 ((uint32_t)0x00400000) /*!< Bit0 */
+#define RCC_CFGR_PLLDIV_1 ((uint32_t)0x00800000) /*!< Bit1 */
+
+
+/*!< PLLDIV configuration */
+#define RCC_CFGR_PLLDIV1 ((uint32_t)0x00000000) /*!< PLL clock output = CKVCO / 1 */
+#define RCC_CFGR_PLLDIV2 ((uint32_t)0x00400000) /*!< PLL clock output = CKVCO / 2 */
+#define RCC_CFGR_PLLDIV3 ((uint32_t)0x00800000) /*!< PLL clock output = CKVCO / 3 */
+#define RCC_CFGR_PLLDIV4 ((uint32_t)0x00C00000) /*!< PLL clock output = CKVCO / 4 */
+
+
+#define RCC_CFGR_MCOSEL ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCOSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCOSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCOSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x01000000) /*!< System clock selected */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x02000000) /*!< Internal 16 MHz RC oscillator clock selected */
+#define RCC_CFGR_MCO_MSI ((uint32_t)0x03000000) /*!< Internal Medium Speed RC oscillator clock selected */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x04000000) /*!< External 1-25 MHz oscillator clock selected */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x05000000) /*!< PLL clock divided */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x06000000) /*!< LSI selected */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x07000000) /*!< LSE selected */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCOPRE[2:0] bits (Microcontroller Clock Output Prescaler) */
+#define RCC_CFGR_MCOPRE_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define RCC_CFGR_MCOPRE_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+#define RCC_CFGR_MCOPRE_2 ((uint32_t)0x40000000) /*!< Bit 2 */
+
+/*!< MCO Prescaler configuration */
+#define RCC_CFGR_MCO_DIV1 ((uint32_t)0x00000000) /*!< MCO Clock divided by 1 */
+#define RCC_CFGR_MCO_DIV2 ((uint32_t)0x10000000) /*!< MCO Clock divided by 2 */
+#define RCC_CFGR_MCO_DIV4 ((uint32_t)0x20000000) /*!< MCO Clock divided by 4 */
+#define RCC_CFGR_MCO_DIV8 ((uint32_t)0x30000000) /*!< MCO Clock divided by 8 */
+#define RCC_CFGR_MCO_DIV16 ((uint32_t)0x40000000) /*!< MCO Clock divided by 16 */
+
+/*!<****************** Bit definition for RCC_CIR register ********************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_MSIRDYF ((uint32_t)0x00000020) /*!< MSI Ready Interrupt flag */
+#define RCC_CIR_LSECSS ((uint32_t)0x00000040) /*!< LSE CSS Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_MSIRDYIE ((uint32_t)0x00002000) /*!< MSI Ready Interrupt Enable */
+#define RCC_CIR_LSECSSIE ((uint32_t)0x00004000) /*!< LSE CSS Interrupt Enable */
+
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_MSIRDYC ((uint32_t)0x00200000) /*!< MSI Ready Interrupt Clear */
+#define RCC_CIR_LSECSSC ((uint32_t)0x00400000) /*!< LSE CSS Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_AHBRSTR register ******************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00000001) /*!< GPIO port A reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00000002) /*!< GPIO port B reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00000004) /*!< GPIO port C reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00000008) /*!< GPIO port D reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00000010) /*!< GPIO port E reset */
+#define RCC_AHBRSTR_GPIOHRST ((uint32_t)0x00000020) /*!< GPIO port H reset */
+#define RCC_AHBRSTR_CRCRST ((uint32_t)0x00001000) /*!< CRC reset */
+#define RCC_AHBRSTR_FLITFRST ((uint32_t)0x00008000) /*!< FLITF reset */
+#define RCC_AHBRSTR_DMA1RST ((uint32_t)0x01000000) /*!< DMA1 reset */
+#define RCC_AHBRSTR_DMA2RST ((uint32_t)0x02000000) /*!< DMA2 reset */
+
+/***************** Bit definition for RCC_APB2RSTR register *****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< System Configuration SYSCFG reset */
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00000004) /*!< TIM9 reset */
+#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00000008) /*!< TIM10 reset */
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00000010) /*!< TIM11 reset */
+#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC1 reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
+
+/***************** Bit definition for RCC_APB1RSTR register *****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */
+#define RCC_APB1RSTR_COMPRST ((uint32_t)0x80000000) /*!< Comparator interface reset */
+
+/****************** Bit definition for RCC_AHBENR register ******************/
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00000001) /*!< GPIO port A clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00000002) /*!< GPIO port B clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00000004) /*!< GPIO port C clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00000008) /*!< GPIO port D clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00000010) /*!< GPIO port E clock enable */
+#define RCC_AHBENR_GPIOHEN ((uint32_t)0x00000020) /*!< GPIO port H clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00001000) /*!< CRC clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00008000) /*!< FLITF clock enable (has effect only when
+ the Flash memory is in power down mode) */
+#define RCC_AHBENR_DMA1EN ((uint32_t)0x01000000) /*!< DMA1 clock enable */
+#define RCC_AHBENR_DMA2EN ((uint32_t)0x02000000) /*!< DMA2 clock enable */
+
+/****************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enable */
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00000004) /*!< TIM9 interface clock enable */
+#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00000008) /*!< TIM10 interface clock enable */
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enable */
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register ******************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */
+#define RCC_APB1ENR_COMPEN ((uint32_t)0x80000000) /*!< Comparator interface clock enable */
+
+/****************** Bit definition for RCC_AHBLPENR register ****************/
+#define RCC_AHBLPENR_GPIOALPEN ((uint32_t)0x00000001) /*!< GPIO port A clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIOBLPEN ((uint32_t)0x00000002) /*!< GPIO port B clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIOCLPEN ((uint32_t)0x00000004) /*!< GPIO port C clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIODLPEN ((uint32_t)0x00000008) /*!< GPIO port D clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIOELPEN ((uint32_t)0x00000010) /*!< GPIO port E clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIOHLPEN ((uint32_t)0x00000020) /*!< GPIO port H clock enabled in sleep mode */
+#define RCC_AHBLPENR_CRCLPEN ((uint32_t)0x00001000) /*!< CRC clock enabled in sleep mode */
+#define RCC_AHBLPENR_FLITFLPEN ((uint32_t)0x00008000) /*!< Flash Interface clock enabled in sleep mode
+ (has effect only when the Flash memory is
+ in power down mode) */
+#define RCC_AHBLPENR_SRAMLPEN ((uint32_t)0x00010000) /*!< SRAM clock enabled in sleep mode */
+#define RCC_AHBLPENR_DMA1LPEN ((uint32_t)0x01000000) /*!< DMA1 clock enabled in sleep mode */
+#define RCC_AHBLPENR_DMA2LPEN ((uint32_t)0x02000000) /*!< DMA2 clock enabled in sleep mode */
+
+/****************** Bit definition for RCC_APB2LPENR register ***************/
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enabled in sleep mode */
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00000004) /*!< TIM9 interface clock enabled in sleep mode */
+#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00000008) /*!< TIM10 interface clock enabled in sleep mode */
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enabled in sleep mode */
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000200) /*!< ADC1 clock enabled in sleep mode */
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000) /*!< SPI1 clock enabled in sleep mode */
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00004000) /*!< USART1 clock enabled in sleep mode */
+
+/***************** Bit definition for RCC_APB1LPENR register ****************/
+#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled in sleep mode */
+#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002) /*!< Timer 3 clock enabled in sleep mode */
+#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004) /*!< Timer 4 clock enabled in sleep mode */
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008) /*!< Timer 5 clock enabled in sleep mode */
+#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010) /*!< Timer 6 clock enabled in sleep mode */
+#define RCC_APB1LPENR_TIM7LPEN ((uint32_t)0x00000020) /*!< Timer 7 clock enabled in sleep mode */
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enabled in sleep mode */
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000) /*!< SPI 2 clock enabled in sleep mode */
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000) /*!< SPI 3 clock enabled in sleep mode */
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000) /*!< USART 2 clock enabled in sleep mode */
+#define RCC_APB1LPENR_USART3LPEN ((uint32_t)0x00040000) /*!< USART 3 clock enabled in sleep mode */
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000) /*!< I2C 1 clock enabled in sleep mode */
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000) /*!< I2C 2 clock enabled in sleep mode */
+#define RCC_APB1LPENR_USBLPEN ((uint32_t)0x00800000) /*!< USB clock enabled in sleep mode */
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000) /*!< Power interface clock enabled in sleep mode */
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000) /*!< DAC interface clock enabled in sleep mode */
+#define RCC_APB1LPENR_COMPLPEN ((uint32_t)0x80000000) /*!< Comparator interface clock enabled in sleep mode*/
+
+/******************* Bit definition for RCC_CSR register ********************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+
+#define RCC_CSR_LSEON ((uint32_t)0x00000100) /*!< External Low Speed oscillator enable */
+#define RCC_CSR_LSERDY ((uint32_t)0x00000200) /*!< External Low Speed oscillator Ready */
+#define RCC_CSR_LSEBYP ((uint32_t)0x00000400) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_CSR_LSECSSON ((uint32_t)0x00000800) /*!< External Low Speed oscillator CSS Enable */
+#define RCC_CSR_LSECSSD ((uint32_t)0x00001000) /*!< External Low Speed oscillator CSS Detected */
+
+#define RCC_CSR_RTCSEL ((uint32_t)0x00030000) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_CSR_RTCSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CSR_RTCSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+/*!< RTC congiguration */
+#define RCC_CSR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CSR_RTCSEL_LSE ((uint32_t)0x00010000) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_CSR_RTCSEL_LSI ((uint32_t)0x00020000) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_CSR_RTCSEL_HSE ((uint32_t)0x00030000) /*!< HSE oscillator clock divided by 2, 4, 8 or 16 by RTCPRE used as RTC clock */
+
+#define RCC_CSR_RTCEN ((uint32_t)0x00400000) /*!< RTC clock enable */
+#define RCC_CSR_RTCRST ((uint32_t)0x00800000) /*!< RTC reset */
+
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< Option Bytes Loader reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP20R register ***************/
+#define RTC_BKP20R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP21R register ***************/
+#define RTC_BKP21R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP22R register ***************/
+#define RTC_BKP22R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP23R register ***************/
+#define RTC_BKP23R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP24R register ***************/
+#define RTC_BKP24R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP25R register ***************/
+#define RTC_BKP25R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP26R register ***************/
+#define RTC_BKP26R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP27R register ***************/
+#define RTC_BKP27R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP28R register ***************/
+#define RTC_BKP28R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP29R register ***************/
+#define RTC_BKP29R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP30R register ***************/
+#define RTC_BKP30R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP31R register ***************/
+#define RTC_BKP31R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER 32
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!< Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame format */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/******************************************************************************/
+/***************** Bit definition for SYSCFG_MEMRMP register ****************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define SYSCFG_MEMRMP_BOOT_MODE ((uint32_t)0x00000300) /*!< Boot mode Config */
+#define SYSCFG_MEMRMP_BOOT_MODE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SYSCFG_MEMRMP_BOOT_MODE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/***************** Bit definition for SYSCFG_PMC register *******************/
+#define SYSCFG_PMC_USB_PU ((uint32_t)0x00000001) /*!< SYSCFG PMC */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x0000000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x000000F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x00000F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0x0000F000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x00000001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x00000002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x00000003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x00000004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x00000005) /*!< PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint32_t)0x00000006) /*!< PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG ((uint32_t)0x00000007) /*!< PG[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x00000010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x00000020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x00000030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x00000040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x00000050) /*!< PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint32_t)0x00000060) /*!< PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG ((uint32_t)0x00000070) /*!< PG[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x00000100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x00000200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x00000300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x00000400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x00000500) /*!< PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint32_t)0x00000600) /*!< PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG ((uint32_t)0x00000700) /*!< PG[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x00001000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x00002000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x00003000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x00004000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint32_t)0x00003000) /*!< PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG ((uint32_t)0x00004000) /*!< PG[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register *****************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x0000000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x000000F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x00000F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0x0000F000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x00000001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x00000002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x00000003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x00000004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint32_t)0x00000006) /*!< PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG ((uint32_t)0x00000007) /*!< PG[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x00000010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x00000020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x00000030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x00000040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint32_t)0x00000060) /*!< PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG ((uint32_t)0x00000070) /*!< PG[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x00000100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x00000200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x00000300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x00000400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint32_t)0x00000600) /*!< PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG ((uint32_t)0x00000700) /*!< PG[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x00001000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x00002000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x00003000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x00004000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint32_t)0x00006000) /*!< PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG ((uint32_t)0x00007000) /*!< PG[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register *****************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x0000000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x000000F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x00000F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0x0000F000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x00000001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x00000002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x00000003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x00000004) /*!< PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint32_t)0x00000006) /*!< PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG ((uint32_t)0x00000007) /*!< PG[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x00000010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x00000020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x00000030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x00000040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint32_t)0x00000060) /*!< PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG ((uint32_t)0x00000070) /*!< PG[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x00000100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x00000200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x00000300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x00000400) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint32_t)0x00000600) /*!< PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG ((uint32_t)0x00000700) /*!< PG[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x00001000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x00002000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x00003000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x00004000) /*!< PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint32_t)0x00006000) /*!< PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG ((uint32_t)0x00007000) /*!< PG[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register *****************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x0000000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x000000F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x00000F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0x0000F000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x00000001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x00000002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x00000003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x00000004) /*!< PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint32_t)0x00000006) /*!< PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG ((uint32_t)0x00000007) /*!< PG[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x00000010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x00000020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x00000030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x00000040) /*!< PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint32_t)0x00000060) /*!< PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG ((uint32_t)0x00000070) /*!< PG[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x00000100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x00000200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x00000300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x00000400) /*!< PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint32_t)0x00000600) /*!< PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG ((uint32_t)0x00000700) /*!< PG[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x00001000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x00002000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x00003000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x00004000) /*!< PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint32_t)0x00006000) /*!< PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG ((uint32_t)0x00007000) /*!< PG[15] pin */
+
+/******************************************************************************/
+/* */
+/* Routing Interface (RI) */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for RI_ICR register ********************/
+#define RI_ICR_IC1OS ((uint32_t)0x0000000F) /*!< IC1OS[3:0] bits (Input Capture 1 select bits) */
+#define RI_ICR_IC1OS_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_ICR_IC1OS_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_ICR_IC1OS_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_ICR_IC1OS_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RI_ICR_IC2OS ((uint32_t)0x000000F0) /*!< IC2OS[3:0] bits (Input Capture 2 select bits) */
+#define RI_ICR_IC2OS_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RI_ICR_IC2OS_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RI_ICR_IC2OS_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RI_ICR_IC2OS_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RI_ICR_IC3OS ((uint32_t)0x00000F00) /*!< IC3OS[3:0] bits (Input Capture 3 select bits) */
+#define RI_ICR_IC3OS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RI_ICR_IC3OS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RI_ICR_IC3OS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define RI_ICR_IC3OS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define RI_ICR_IC4OS ((uint32_t)0x0000F000) /*!< IC4OS[3:0] bits (Input Capture 4 select bits) */
+#define RI_ICR_IC4OS_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define RI_ICR_IC4OS_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define RI_ICR_IC4OS_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+#define RI_ICR_IC4OS_3 ((uint32_t)0x00008000) /*!< Bit 3 */
+
+#define RI_ICR_TIM ((uint32_t)0x00030000) /*!< TIM[3:0] bits (Timers select bits) */
+#define RI_ICR_TIM_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RI_ICR_TIM_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RI_ICR_IC1 ((uint32_t)0x00040000) /*!< Input capture 1 */
+#define RI_ICR_IC2 ((uint32_t)0x00080000) /*!< Input capture 2 */
+#define RI_ICR_IC3 ((uint32_t)0x00100000) /*!< Input capture 3 */
+#define RI_ICR_IC4 ((uint32_t)0x00200000) /*!< Input capture 4 */
+
+/******************** Bit definition for RI_ASCR1 register ********************/
+#define RI_ASCR1_CH ((uint32_t)0x7BFDFFFF) /*!< AS_CH[25:18] & AS_CH[15:0] bits ( Analog switches selection bits) */
+#define RI_ASCR1_CH_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_ASCR1_CH_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_ASCR1_CH_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_ASCR1_CH_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_ASCR1_CH_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_ASCR1_CH_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_ASCR1_CH_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_ASCR1_CH_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_ASCR1_CH_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_ASCR1_CH_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_ASCR1_CH_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_ASCR1_CH_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_ASCR1_CH_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_ASCR1_CH_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_ASCR1_CH_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_ASCR1_CH_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+#define RI_ASCR1_CH_31 ((uint32_t)0x00010000) /*!< Bit 16 */
+#define RI_ASCR1_CH_18 ((uint32_t)0x00040000) /*!< Bit 18 */
+#define RI_ASCR1_CH_19 ((uint32_t)0x00080000) /*!< Bit 19 */
+#define RI_ASCR1_CH_20 ((uint32_t)0x00100000) /*!< Bit 20 */
+#define RI_ASCR1_CH_21 ((uint32_t)0x00200000) /*!< Bit 21 */
+#define RI_ASCR1_CH_22 ((uint32_t)0x00400000) /*!< Bit 22 */
+#define RI_ASCR1_CH_23 ((uint32_t)0x00800000) /*!< Bit 23 */
+#define RI_ASCR1_CH_24 ((uint32_t)0x01000000) /*!< Bit 24 */
+#define RI_ASCR1_CH_25 ((uint32_t)0x02000000) /*!< Bit 25 */
+#define RI_ASCR1_VCOMP ((uint32_t)0x04000000) /*!< ADC analog switch selection for internal node to COMP1 */
+#define RI_ASCR1_CH_27 ((uint32_t)0x00400000) /*!< Bit 27 */
+#define RI_ASCR1_CH_28 ((uint32_t)0x00800000) /*!< Bit 28 */
+#define RI_ASCR1_CH_29 ((uint32_t)0x01000000) /*!< Bit 29 */
+#define RI_ASCR1_CH_30 ((uint32_t)0x02000000) /*!< Bit 30 */
+#define RI_ASCR1_SCM ((uint32_t)0x80000000) /*!< I/O Switch control mode */
+
+/******************** Bit definition for RI_ASCR2 register ********************/
+#define RI_ASCR2_GR10_1 ((uint32_t)0x00000001) /*!< GR10-1 selection bit */
+#define RI_ASCR2_GR10_2 ((uint32_t)0x00000002) /*!< GR10-2 selection bit */
+#define RI_ASCR2_GR10_3 ((uint32_t)0x00000004) /*!< GR10-3 selection bit */
+#define RI_ASCR2_GR10_4 ((uint32_t)0x00000008) /*!< GR10-4 selection bit */
+#define RI_ASCR2_GR6_1 ((uint32_t)0x00000010) /*!< GR6-1 selection bit */
+#define RI_ASCR2_GR6_2 ((uint32_t)0x00000020) /*!< GR6-2 selection bit */
+#define RI_ASCR2_GR5_1 ((uint32_t)0x00000040) /*!< GR5-1 selection bit */
+#define RI_ASCR2_GR5_2 ((uint32_t)0x00000080) /*!< GR5-2 selection bit */
+#define RI_ASCR2_GR5_3 ((uint32_t)0x00000100) /*!< GR5-3 selection bit */
+#define RI_ASCR2_GR4_1 ((uint32_t)0x00000200) /*!< GR4-1 selection bit */
+#define RI_ASCR2_GR4_2 ((uint32_t)0x00000400) /*!< GR4-2 selection bit */
+#define RI_ASCR2_GR4_3 ((uint32_t)0x00000800) /*!< GR4-3 selection bit */
+#define RI_ASCR2_GR4_4 ((uint32_t)0x00008000) /*!< GR4-4 selection bit */
+#define RI_ASCR2_CH0b ((uint32_t)0x00010000) /*!< CH0b selection bit */
+#define RI_ASCR2_GR6_3 ((uint32_t)0x08000000) /*!< GR6-3 selection bit */
+#define RI_ASCR2_GR6_4 ((uint32_t)0x10000000) /*!< GR6-4 selection bit */
+
+/******************** Bit definition for RI_HYSCR1 register ********************/
+#define RI_HYSCR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A Hysteresis selection */
+#define RI_HYSCR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_HYSCR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_HYSCR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_HYSCR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_HYSCR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_HYSCR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_HYSCR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_HYSCR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_HYSCR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_HYSCR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_HYSCR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_HYSCR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_HYSCR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_HYSCR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_HYSCR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_HYSCR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+#define RI_HYSCR1_PB ((uint32_t)0xFFFF0000) /*!< PB[15:0] Port B Hysteresis selection */
+#define RI_HYSCR1_PB_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RI_HYSCR1_PB_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define RI_HYSCR1_PB_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define RI_HYSCR1_PB_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define RI_HYSCR1_PB_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define RI_HYSCR1_PB_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define RI_HYSCR1_PB_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define RI_HYSCR1_PB_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define RI_HYSCR1_PB_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define RI_HYSCR1_PB_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define RI_HYSCR1_PB_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define RI_HYSCR1_PB_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define RI_HYSCR1_PB_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define RI_HYSCR1_PB_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define RI_HYSCR1_PB_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define RI_HYSCR1_PB_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_HYSCR2 register ********************/
+#define RI_HYSCR2_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C Hysteresis selection */
+#define RI_HYSCR2_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_HYSCR2_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_HYSCR2_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_HYSCR2_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_HYSCR2_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_HYSCR2_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_HYSCR2_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_HYSCR2_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_HYSCR2_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_HYSCR2_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_HYSCR2_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_HYSCR2_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_HYSCR2_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_HYSCR2_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_HYSCR2_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_HYSCR2_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+#define RI_HYSCR2_PD ((uint32_t)0xFFFF0000) /*!< PD[15:0] Port D Hysteresis selection */
+#define RI_HYSCR2_PD_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RI_HYSCR2_PD_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define RI_HYSCR2_PD_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define RI_HYSCR2_PD_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define RI_HYSCR2_PD_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define RI_HYSCR2_PD_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define RI_HYSCR2_PD_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define RI_HYSCR2_PD_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define RI_HYSCR2_PD_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define RI_HYSCR2_PD_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define RI_HYSCR2_PD_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define RI_HYSCR2_PD_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define RI_HYSCR2_PD_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define RI_HYSCR2_PD_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define RI_HYSCR2_PD_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define RI_HYSCR2_PD_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_HYSCR3 register ********************/
+#define RI_HYSCR3_PE ((uint32_t)0x0000FFFF) /*!< PE[15:0] Port E Hysteresis selection */
+#define RI_HYSCR3_PE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_HYSCR3_PE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_HYSCR3_PE_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_HYSCR3_PE_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_HYSCR3_PE_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_HYSCR3_PE_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_HYSCR3_PE_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_HYSCR3_PE_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_HYSCR3_PE_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_HYSCR3_PE_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_HYSCR3_PE_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_HYSCR3_PE_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_HYSCR3_PE_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_HYSCR3_PE_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_HYSCR3_PE_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_HYSCR3_PE_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_ASMR1 register ********************/
+#define RI_ASMR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/
+#define RI_ASMR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_ASMR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_ASMR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_ASMR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_ASMR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_ASMR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_ASMR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_ASMR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_ASMR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_ASMR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_ASMR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_ASMR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_ASMR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_ASMR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_ASMR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_ASMR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_CMR1 register ********************/
+#define RI_CMR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/
+#define RI_CMR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_CMR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_CMR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_CMR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_CMR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_CMR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_CMR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_CMR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_CMR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_CMR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_CMR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_CMR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_CMR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_CMR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_CMR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_CMR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_CICR1 register ********************/
+#define RI_CICR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/
+#define RI_CICR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_CICR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_CICR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_CICR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_CICR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_CICR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_CICR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_CICR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_CICR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_CICR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_CICR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_CICR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_CICR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_CICR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_CICR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_CICR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_ASMR2 register ********************/
+#define RI_ASMR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */
+#define RI_ASMR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_ASMR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_ASMR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_ASMR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_ASMR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_ASMR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_ASMR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_ASMR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_ASMR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_ASMR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_ASMR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_ASMR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_ASMR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_ASMR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_ASMR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_ASMR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_CMR2 register ********************/
+#define RI_CMR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */
+#define RI_CMR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_CMR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_CMR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_CMR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_CMR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_CMR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_CMR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_CMR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_CMR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_CMR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_CMR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_CMR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_CMR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_CMR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_CMR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_CMR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_CICR2 register ********************/
+#define RI_CICR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */
+#define RI_CICR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_CICR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_CICR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_CICR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_CICR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_CICR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_CICR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_CICR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_CICR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_CICR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_CICR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_CICR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_CICR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_CICR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_CICR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_CICR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_ASMR3 register ********************/
+#define RI_ASMR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */
+#define RI_ASMR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_ASMR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_ASMR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_ASMR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_ASMR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_ASMR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_ASMR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_ASMR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_ASMR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_ASMR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_ASMR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_ASMR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_ASMR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_ASMR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_ASMR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_ASMR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_CMR3 register ********************/
+#define RI_CMR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */
+#define RI_CMR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_CMR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_CMR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_CMR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_CMR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_CMR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_CMR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_CMR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_CMR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_CMR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_CMR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_CMR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_CMR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_CMR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_CMR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_CMR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_CICR3 register ********************/
+#define RI_CICR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */
+#define RI_CICR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_CICR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_CICR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_CICR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_CICR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_CICR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_CICR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_CICR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_CICR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_CICR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_CICR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_CICR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_CICR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_CICR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_CICR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_CICR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
+/******************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0x0000FFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0x0000FFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI1RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM Input 1 remap) */
+#define TIM_OR_TI1RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_OR_TI1RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_OR_ETR_RMP ((uint32_t)0x00000004) /*!<ETR_RMP bit (TIM10/11 ETR remap)*/
+#define TIM_OR_TI1_RMP_RI ((uint32_t)0x00000008) /*!<TI1_RMP_RI bit (TIM10/11 Input 1 remap for Routing interface) */
+
+/*----------------------------------------------------------------------------*/
+#define TIM9_OR_ITR1_RMP ((uint32_t)0x00000004) /*!<ITR1_RMP bit (TIM9 Internal trigger 1 remap) */
+
+/*----------------------------------------------------------------------------*/
+#define TIM2_OR_ITR1_RMP ((uint32_t)0x00000001) /*!<ITR1_RMP bit (TIM2 Internal trigger 1 remap) */
+
+/*----------------------------------------------------------------------------*/
+#define TIM3_OR_ITR2_RMP ((uint32_t)0x00000001) /*!<ITR2_RMP bit (TIM3 Internal trigger 2 remap) */
+
+/*----------------------------------------------------------------------------*/
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_SR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_SR_NE ((uint32_t)0x00000004) /*!< Noise Error Flag */
+#define USART_SR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_SR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_SR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_SR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_SR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_SR_LBD ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_SR_CTS ((uint32_t)0x00000200) /*!< CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint32_t)0x000001FF) /*!< Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint32_t)0x00000001) /*!< Send Break */
+#define USART_CR1_RWU ((uint32_t)0x00000002) /*!< Receiver wakeup */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Wakeup method */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< Word length */
+#define USART_CR1_UE ((uint32_t)0x00002000) /*!< USART Enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit mode */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint32_t)0x0000000F) /*!< Address of the USART node */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Smartcard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define USART_GTPR_PSC_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define USART_GTPR_PSC_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define USART_GTPR_PSC_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define USART_GTPR_PSC_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define USART_GTPR_PSC_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define USART_GTPR_PSC_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define USART_GTPR_PSC_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< Guard time value */
+
+/******************************************************************************/
+/* */
+/* Universal Serial Bus (USB) */
+/* */
+/******************************************************************************/
+
+/*!<Endpoint-specific registers */
+
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x00000004) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x00000008) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0000000C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x00000010) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x00000014) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x00000018) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x0000001C) /*!< endpoint 7 register address */
+
+/* bit positions */
+#define USB_EP_CTR_RX ((uint32_t)0x00008000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint32_t)0x00004000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint32_t)0x00003000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint32_t)0x00000800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint32_t)0x00000600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint32_t)0x00000100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint32_t)0x00000080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint32_t)0x00000040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint32_t)0x00000030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint32_t)0x0000000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint32_t)0x00000600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint32_t)0x00000000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint32_t)0x00000200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint32_t)0x00000400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint32_t)0x00000600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint32_t)0x00000000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint32_t)0x00000010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint32_t)0x00000020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint32_t)0x00000030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint32_t)0x00000010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint32_t)0x00000020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint32_t)0x00000000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint32_t)0x00001000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint32_t)0x00002000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint32_t)0x00003000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint32_t)0x00001000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint32_t)0x00002000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************* Bit definition for USB_EP0R register *******************/
+#define USB_EP0R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP0R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP0R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP0R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP0R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP0R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP0R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP0R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP0R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP0R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP0R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP0R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP0R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP0R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP0R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP0R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP1R register *******************/
+#define USB_EP1R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP1R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP1R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP1R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP1R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP1R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP1R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP1R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP1R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP1R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP1R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP1R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP1R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP1R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP1R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP1R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP2R register *******************/
+#define USB_EP2R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP2R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP2R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP2R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP2R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP2R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP2R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP2R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP2R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP2R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP2R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP2R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP2R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP2R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP2R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP2R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP3R register *******************/
+#define USB_EP3R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP3R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP3R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP3R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP3R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP3R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP3R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP3R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP3R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP3R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP3R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP3R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP3R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP3R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP3R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP3R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP4R register *******************/
+#define USB_EP4R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP4R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP4R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP4R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP4R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP4R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP4R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP4R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP4R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP4R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP4R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP4R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP4R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP4R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP4R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP4R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP5R register *******************/
+#define USB_EP5R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP5R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP5R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP5R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP5R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP5R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP5R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP5R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP5R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP5R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP5R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP5R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP5R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP5R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP5R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP5R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP6R register *******************/
+#define USB_EP6R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP6R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP6R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP6R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP6R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP6R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP6R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP6R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP6R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP6R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP6R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP6R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP6R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP6R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP6R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP6R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP7R register *******************/
+#define USB_EP7R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */
+
+#define USB_EP7R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP7R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_EP7R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define USB_EP7R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */
+#define USB_EP7R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */
+#define USB_EP7R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */
+
+#define USB_EP7R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP7R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define USB_EP7R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+
+#define USB_EP7R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */
+
+#define USB_EP7R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP7R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define USB_EP7R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define USB_EP7R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */
+#define USB_EP7R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */
+
+/*!<Common registers */
+
+#define USB_CNTR (USB_BASE + 0x00000040) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x00000044) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x00000048) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x0000004C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x00000050) /*!< Buffer Table address register */
+
+
+
+/******************* Bit definition for USB_CNTR register *******************/
+#define USB_CNTR_FRES ((uint32_t)0x00000001) /*!<Force USB Reset */
+#define USB_CNTR_PDWN ((uint32_t)0x00000002) /*!<Power down */
+#define USB_CNTR_LP_MODE ((uint32_t)0x00000004) /*!<Low-power mode */
+#define USB_CNTR_FSUSP ((uint32_t)0x00000008) /*!<Force suspend */
+#define USB_CNTR_RESUME ((uint32_t)0x00000010) /*!<Resume request */
+#define USB_CNTR_ESOFM ((uint32_t)0x00000100) /*!<Expected Start Of Frame Interrupt Mask */
+#define USB_CNTR_SOFM ((uint32_t)0x00000200) /*!<Start Of Frame Interrupt Mask */
+#define USB_CNTR_RESETM ((uint32_t)0x00000400) /*!<RESET Interrupt Mask */
+#define USB_CNTR_SUSPM ((uint32_t)0x00000800) /*!<Suspend mode Interrupt Mask */
+#define USB_CNTR_WKUPM ((uint32_t)0x00001000) /*!<Wakeup Interrupt Mask */
+#define USB_CNTR_ERRM ((uint32_t)0x00002000) /*!<Error Interrupt Mask */
+#define USB_CNTR_PMAOVRM ((uint32_t)0x00004000) /*!<Packet Memory Area Over / Underrun Interrupt Mask */
+#define USB_CNTR_CTRM ((uint32_t)0x00008000) /*!<Correct Transfer Interrupt Mask */
+
+/******************* Bit definition for USB_ISTR register *******************/
+#define USB_ISTR_EP_ID ((uint32_t)0x0000000F) /*!<Endpoint Identifier */
+#define USB_ISTR_DIR ((uint32_t)0x00000010) /*!<Direction of transaction */
+#define USB_ISTR_ESOF ((uint32_t)0x00000100) /*!<Expected Start Of Frame */
+#define USB_ISTR_SOF ((uint32_t)0x00000200) /*!<Start Of Frame */
+#define USB_ISTR_RESET ((uint32_t)0x00000400) /*!<USB RESET request */
+#define USB_ISTR_SUSP ((uint32_t)0x00000800) /*!<Suspend mode request */
+#define USB_ISTR_WKUP ((uint32_t)0x00001000) /*!<Wake up */
+#define USB_ISTR_ERR ((uint32_t)0x00002000) /*!<Error */
+#define USB_ISTR_PMAOVRM ((uint32_t)0x00004000) /*!<Packet Memory Area Over / Underrun */
+#define USB_ISTR_CTR ((uint32_t)0x00008000) /*!<Correct Transfer */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVRM (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+
+
+/******************* Bit definition for USB_FNR register ********************/
+#define USB_FNR_FN ((uint32_t)0x000007FF) /*!<Frame Number */
+#define USB_FNR_LSOF ((uint32_t)0x00001800) /*!<Lost SOF */
+#define USB_FNR_LCK ((uint32_t)0x00002000) /*!<Locked */
+#define USB_FNR_RXDM ((uint32_t)0x00004000) /*!<Receive Data - Line Status */
+#define USB_FNR_RXDP ((uint32_t)0x00008000) /*!<Receive Data + Line Status */
+
+/****************** Bit definition for USB_DADDR register *******************/
+#define USB_DADDR_ADD ((uint32_t)0x0000007F) /*!<ADD[6:0] bits (Device Address) */
+#define USB_DADDR_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_DADDR_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_DADDR_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_DADDR_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_DADDR_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define USB_DADDR_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define USB_DADDR_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define USB_DADDR_EF ((uint32_t)0x00000080) /*!<Enable Function */
+
+/****************** Bit definition for USB_BTABLE register ******************/
+#define USB_BTABLE_BTABLE ((uint32_t)0x0000FFF8) /*!<Buffer Table */
+
+/*!< Buffer descriptor table */
+/***************** Bit definition for USB_ADDR0_TX register *****************/
+#define USB_ADDR0_TX_ADDR0_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 0 */
+
+/***************** Bit definition for USB_ADDR1_TX register *****************/
+#define USB_ADDR1_TX_ADDR1_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 1 */
+
+/***************** Bit definition for USB_ADDR2_TX register *****************/
+#define USB_ADDR2_TX_ADDR2_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 2 */
+
+/***************** Bit definition for USB_ADDR3_TX register *****************/
+#define USB_ADDR3_TX_ADDR3_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 3 */
+
+/***************** Bit definition for USB_ADDR4_TX register *****************/
+#define USB_ADDR4_TX_ADDR4_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 4 */
+
+/***************** Bit definition for USB_ADDR5_TX register *****************/
+#define USB_ADDR5_TX_ADDR5_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 5 */
+
+/***************** Bit definition for USB_ADDR6_TX register *****************/
+#define USB_ADDR6_TX_ADDR6_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 6 */
+
+/***************** Bit definition for USB_ADDR7_TX register *****************/
+#define USB_ADDR7_TX_ADDR7_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/***************** Bit definition for USB_COUNT0_TX register ****************/
+#define USB_COUNT0_TX_COUNT0_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 */
+
+/***************** Bit definition for USB_COUNT1_TX register ****************/
+#define USB_COUNT1_TX_COUNT1_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 */
+
+/***************** Bit definition for USB_COUNT2_TX register ****************/
+#define USB_COUNT2_TX_COUNT2_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 */
+
+/***************** Bit definition for USB_COUNT3_TX register ****************/
+#define USB_COUNT3_TX_COUNT3_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 3 */
+
+/***************** Bit definition for USB_COUNT4_TX register ****************/
+#define USB_COUNT4_TX_COUNT4_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 */
+
+/***************** Bit definition for USB_COUNT5_TX register ****************/
+#define USB_COUNT5_TX_COUNT5_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 */
+
+/***************** Bit definition for USB_COUNT6_TX register ****************/
+#define USB_COUNT6_TX_COUNT6_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 */
+
+/***************** Bit definition for USB_COUNT7_TX register ****************/
+#define USB_COUNT7_TX_COUNT7_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/**************** Bit definition for USB_COUNT0_TX_0 register ***************/
+#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */
+
+/**************** Bit definition for USB_COUNT0_TX_1 register ***************/
+#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */
+
+/**************** Bit definition for USB_COUNT1_TX_0 register ***************/
+#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */
+
+/**************** Bit definition for USB_COUNT1_TX_1 register ***************/
+#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */
+
+/**************** Bit definition for USB_COUNT2_TX_0 register ***************/
+#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */
+
+/**************** Bit definition for USB_COUNT2_TX_1 register ***************/
+#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */
+
+/**************** Bit definition for USB_COUNT3_TX_0 register ***************/
+#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint32_t)0x0000000003FF) /*!< Transmission Byte Count 3 (low) */
+
+/**************** Bit definition for USB_COUNT3_TX_1 register ***************/
+#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint32_t)0x000003FF0000) /*!< Transmission Byte Count 3 (high) */
+
+/**************** Bit definition for USB_COUNT4_TX_0 register ***************/
+#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */
+
+/**************** Bit definition for USB_COUNT4_TX_1 register ***************/
+#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */
+
+/**************** Bit definition for USB_COUNT5_TX_0 register ***************/
+#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */
+
+/**************** Bit definition for USB_COUNT5_TX_1 register ***************/
+#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */
+
+/**************** Bit definition for USB_COUNT6_TX_0 register ***************/
+#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */
+
+/**************** Bit definition for USB_COUNT6_TX_1 register ***************/
+#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */
+
+/**************** Bit definition for USB_COUNT7_TX_0 register ***************/
+#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */
+
+/**************** Bit definition for USB_COUNT7_TX_1 register ***************/
+#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */
+
+/*----------------------------------------------------------------------------*/
+
+/***************** Bit definition for USB_ADDR0_RX register *****************/
+#define USB_ADDR0_RX_ADDR0_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 0 */
+
+/***************** Bit definition for USB_ADDR1_RX register *****************/
+#define USB_ADDR1_RX_ADDR1_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 1 */
+
+/***************** Bit definition for USB_ADDR2_RX register *****************/
+#define USB_ADDR2_RX_ADDR2_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 2 */
+
+/***************** Bit definition for USB_ADDR3_RX register *****************/
+#define USB_ADDR3_RX_ADDR3_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 3 */
+
+/***************** Bit definition for USB_ADDR4_RX register *****************/
+#define USB_ADDR4_RX_ADDR4_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 4 */
+
+/***************** Bit definition for USB_ADDR5_RX register *****************/
+#define USB_ADDR5_RX_ADDR5_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 5 */
+
+/***************** Bit definition for USB_ADDR6_RX register *****************/
+#define USB_ADDR6_RX_ADDR6_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 6 */
+
+/***************** Bit definition for USB_ADDR7_RX register *****************/
+#define USB_ADDR7_RX_ADDR7_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/***************** Bit definition for USB_COUNT0_RX register ****************/
+#define USB_COUNT0_RX_COUNT0_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT0_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT0_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT1_RX register ****************/
+#define USB_COUNT1_RX_COUNT1_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT1_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT1_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT2_RX register ****************/
+#define USB_COUNT2_RX_COUNT2_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT2_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT2_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT3_RX register ****************/
+#define USB_COUNT3_RX_COUNT3_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT3_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT3_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT4_RX register ****************/
+#define USB_COUNT4_RX_COUNT4_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT4_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT4_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT5_RX register ****************/
+#define USB_COUNT5_RX_COUNT5_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT5_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT5_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT6_RX register ****************/
+#define USB_COUNT6_RX_COUNT6_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT6_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT6_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT7_RX register ****************/
+#define USB_COUNT7_RX_COUNT7_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */
+
+#define USB_COUNT7_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT7_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */
+
+/*----------------------------------------------------------------------------*/
+
+/**************** Bit definition for USB_COUNT0_RX_0 register ***************/
+#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT0_RX_1 register ***************/
+#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT1_RX_0 register ***************/
+#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT1_RX_1 register ***************/
+#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT2_RX_0 register ***************/
+#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT2_RX_1 register ***************/
+#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT3_RX_0 register ***************/
+#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT3_RX_1 register ***************/
+#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT4_RX_0 register ***************/
+#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT4_RX_1 register ***************/
+#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT5_RX_0 register ***************/
+#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT5_RX_1 register ***************/
+#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/*************** Bit definition for USB_COUNT6_RX_0 register ***************/
+#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT6_RX_1 register ***************/
+#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/*************** Bit definition for USB_COUNT7_RX_0 register ****************/
+#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/*************** Bit definition for USB_COUNT7_RX_1 register ****************/
+#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x0000007F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x00000040) /*!< Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x00000080) /*!< Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x0000007F) /*!< W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x00000040) /*!< Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x00000180) /*!< WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x00000080) /*!< Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x00000100) /*!< Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x00000200) /*!< Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x00000001) /*!< Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/* */
+/* SystemTick (SysTick) */
+/* */
+/******************************************************************************/
+
+/***************** Bit definition for SysTick_CTRL register *****************/
+#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */
+#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */
+#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */
+#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */
+
+/***************** Bit definition for SysTick_LOAD register *****************/
+#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */
+
+/***************** Bit definition for SysTick_VAL register ******************/
+#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */
+
+/***************** Bit definition for SysTick_CALIB register ****************/
+#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */
+#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */
+#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */
+
+/******************************************************************************/
+/* */
+/* Nested Vectored Interrupt Controller (NVIC) */
+/* */
+/******************************************************************************/
+
+/****************** Bit definition for NVIC_ISER register *******************/
+#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */
+#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_ICER register *******************/
+#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */
+#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_ISPR register *******************/
+#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */
+#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_ICPR register *******************/
+#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */
+#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_IABR register *******************/
+#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */
+#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_PRI0 register *******************/
+#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */
+#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */
+#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */
+#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */
+
+/****************** Bit definition for NVIC_PRI1 register *******************/
+#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */
+#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */
+#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */
+#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */
+
+/****************** Bit definition for NVIC_PRI2 register *******************/
+#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */
+#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */
+#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */
+#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */
+
+/****************** Bit definition for NVIC_PRI3 register *******************/
+#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */
+#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */
+#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */
+#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */
+
+/****************** Bit definition for NVIC_PRI4 register *******************/
+#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */
+#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */
+#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */
+#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */
+
+/****************** Bit definition for NVIC_PRI5 register *******************/
+#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */
+#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */
+#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */
+#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */
+
+/****************** Bit definition for NVIC_PRI6 register *******************/
+#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */
+#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */
+#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */
+#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */
+
+/****************** Bit definition for NVIC_PRI7 register *******************/
+#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */
+#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */
+#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */
+#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */
+
+/****************** Bit definition for SCB_CPUID register *******************/
+#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */
+#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */
+#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */
+#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */
+#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */
+
+/******************* Bit definition for SCB_ICSR register *******************/
+#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */
+#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */
+#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */
+#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */
+#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */
+#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */
+#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */
+#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */
+#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */
+#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */
+
+/******************* Bit definition for SCB_VTOR register *******************/
+#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */
+#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */
+
+/*!<***************** Bit definition for SCB_AIRCR register *******************/
+#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */
+#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */
+#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */
+
+#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */
+#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+/* prority group configuration */
+#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */
+#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */
+
+#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */
+#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */
+
+/******************* Bit definition for SCB_SCR register ********************/
+#define SCB_SCR_SLEEPONEXIT ((uint32_t)0x00000002) /*!< Sleep on exit bit */
+#define SCB_SCR_SLEEPDEEP ((uint32_t)0x00000004) /*!< Sleep deep bit */
+#define SCB_SCR_SEVONPEND ((uint32_t)0x00000010) /*!< Wake up from WFE */
+
+/******************** Bit definition for SCB_CCR register *******************/
+#define SCB_CCR_NONBASETHRDENA ((uint32_t)0x00000001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */
+#define SCB_CCR_USERSETMPEND ((uint32_t)0x00000002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */
+#define SCB_CCR_UNALIGN_TRP ((uint32_t)0x00000008) /*!< Trap for unaligned access */
+#define SCB_CCR_DIV_0_TRP ((uint32_t)0x00000010) /*!< Trap on Divide by 0 */
+#define SCB_CCR_BFHFNMIGN ((uint32_t)0x00000100) /*!< Handlers running at priority -1 and -2 */
+#define SCB_CCR_STKALIGN ((uint32_t)0x00000200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */
+
+/******************* Bit definition for SCB_SHPR register ********************/
+#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */
+#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */
+#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */
+#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */
+
+/****************** Bit definition for SCB_SHCSR register *******************/
+#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */
+#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */
+#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */
+#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */
+#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */
+#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */
+#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */
+#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */
+#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */
+#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */
+#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */
+#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */
+#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */
+#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */
+
+/******************* Bit definition for SCB_CFSR register *******************/
+/*!< MFSR */
+#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */
+#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */
+#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */
+#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */
+#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */
+/*!< BFSR */
+#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */
+#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */
+#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */
+#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */
+#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */
+#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */
+/*!< UFSR */
+#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to excecute an undefined instruction */
+#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */
+#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */
+#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */
+#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */
+#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */
+
+/******************* Bit definition for SCB_HFSR register *******************/
+#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occures because of vector table read on exception processing */
+#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */
+#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */
+
+/******************* Bit definition for SCB_DFSR register *******************/
+#define SCB_DFSR_HALTED ((uint32_t)0x00000001) /*!< Halt request flag */
+#define SCB_DFSR_BKPT ((uint32_t)0x00000002) /*!< BKPT flag */
+#define SCB_DFSR_DWTTRAP ((uint32_t)0x00000004) /*!< Data Watchpoint and Trace (DWT) flag */
+#define SCB_DFSR_VCATCH ((uint32_t)0x00000008) /*!< Vector catch flag */
+#define SCB_DFSR_EXTERNAL ((uint32_t)0x00000010) /*!< External debug request flag */
+
+/******************* Bit definition for SCB_MMFAR register ******************/
+#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */
+
+/******************* Bit definition for SCB_BFAR register *******************/
+#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */
+
+/******************* Bit definition for SCB_afsr register *******************/
+#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************** COMP Instances ******************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2))
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/****************************** DAC Instances *********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/****************************** DMA Instances *********************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7) || \
+ ((INSTANCE) == DMA2_Channel1) || \
+ ((INSTANCE) == DMA2_Channel2) || \
+ ((INSTANCE) == DMA2_Channel3) || \
+ ((INSTANCE) == DMA2_Channel4) || \
+ ((INSTANCE) == DMA2_Channel5))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/**************************** GPIO Lock Instances *****************************/
+/* On L1, all GPIO Bank support the Lock mechanism */
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE)
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3))
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** OPAMP Instances *******************************/
+#define IS_OPAMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == OPAMP1) || \
+ ((INSTANCE) == OPAMP2))
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM5)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : LIN mode **********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/***************** UART Instances : Multi-Processor mode **********************/
+#define IS_UART_MULTIPROCESSOR_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/**
+ * @}
+ */
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32L1xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32L1 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+
+/* Aliases for __IRQHandler */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L151xC_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/stm32l1xx.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,261 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 5-September-2014
+ * @brief CMSIS STM32L1xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32L1xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l1xx
+ * @{
+ */
+
+#ifndef __STM32L1XX_H
+#define __STM32L1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+
+//MODTRONIX BEGIN - HAL Defines ///////////////////////////////////////////////
+//Provide place for adding HAL defines. Alternative to adding them in IDE project properties.
+//Add project defines here, or add them to your toolchain compiler preprocessor
+
+//Defines what ports to use for default serial port.
+//0 = B10/B11
+//1 = A2/A3
+#if !defined (MX_DEFAULT_SERIAL_PINS)
+#define MX_DEFAULT_SERIAL_PINS 0 /*!< Use B10/B11 for default serial port, in stead of A2/A3 */
+#endif
+
+//MODTRONIX END ///////////////////////////////////////////////////////////////
+
+/* Uncomment the line below according to the target STM32L device used in your
+ application
+ */
+
+#if !defined (STM32L100xB) && !defined (STM32L100xBA) && !defined (STM32L100xC) && \
+ !defined (STM32L151xB) && !defined (STM32L151xBA) && !defined (STM32L151xC) && !defined (STM32L151xCA) && !defined (STM32L151xD) && !defined (STM32L151xE) && \
+ !defined (STM32L152xB) && !defined (STM32L152xBA) && !defined (STM32L152xC) && !defined (STM32L152xCA) && !defined (STM32L152xD) && !defined (STM32L152xE) && \
+ !defined (STM32L162xC) && !defined (STM32L162xCA) && !defined (STM32L162xD) && !defined (STM32L162xE)
+ /* #define STM32L100xB */ /*!< STM32L100C6, STM32L100R and STM32L100RB Devices */
+ /* #define STM32L100xBA */ /*!< STM32L100C6-A, STM32L100R8-A and STM32L100RB-A Devices */
+ /* #define STM32L100xC */ /*!< STM32L100RC Devices */
+ /* #define STM32L151xB */ /*!< STM32L151C6, STM32L151R6, STM32L151C8, STM32L151R8, STM32L151V8, STM32L151CB, STM32L151RB and STM32L151VB */
+ /* #define STM32L151xBA */ /*!< STM32L151C6-A, STM32L151R6-A, STM32L151C8-A, STM32L151R8-A, STM32L151V8-A, STM32L151CB-A, STM32L151RB-A and STM32L151VB-A */
+ #define STM32L151xC /*!< STM32L151CC, STM32L151UC, STM32L151RC and STM32L151VC */
+ /* #define STM32L151xCA */ /*!< STM32L151RC-A, STM32L151VC-A, STM32L151QC and STM32L151ZC */
+ /* #define STM32L151xD */ /*!< STM32L151QD, STM32L151RD, STM32L151VD & STM32L151ZD */
+ /* #define STM32L151xE */ /*!< STM32L151QE, STM32L151RE, STM32L151VE and STM32L151ZE */
+ /* #define STM32L152xB */ /*!< STM32L152C6, STM32L152R6, STM32L152C8, STM32L152R8, STM32L152V8, STM32L152CB, STM32L152RB and STM32L152VB */
+ /* #define STM32L152xBA */ /*!< STM32L152C6-A, STM32L152R6-A, STM32L152C8-A, STM32L152R8-A, STM32L152V8-A, STM32L152CB-A, STM32L152RB-A and STM32L152VB-A */
+ /* #define STM32L152xC */ /*!< STM32L152CC, STM32L152UC, STM32L152RC and STM32L152VC */
+ /* #define STM32L152xCA */ /*!< STM32L152RC-A, STM32L152VC-A, STM32L152QC and STM32L152ZC */
+ /* #define STM32L152xD */ /*!< STM32L152QD, STM32L152RD, STM32L152VD and STM32L152ZD */
+ /* #define STM32L152xE */ /*!< STM32L152QE, STM32L152RE, STM32L152VE and STM32L152ZE */
+ /* #define STM32L162xC */ /*!< STM32L162RC and STM32L162VC */
+ /* #define STM32L162xCA */ /*!< STM32L162RC-A, STM32L162VC-A, STM32L162QC and STM32L162ZC */
+ /* #define STM32L162xD */ /*!< STM32L162QD, STM32L162RD, STM32L162VD and STM32L162ZD */
+ /* #define STM32L162xE */ /*!< STM32L162RE, STM32L162VE and STM32L162ZE */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.0.0
+ */
+#define __STM32L1xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32L1xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32L1xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32L1xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32L1xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32L100xB)
+ #include "stm32l100xb.h"
+#elif defined(STM32L100xBA)
+ #include "stm32l100xba.h"
+#elif defined(STM32L100xC)
+ #include "stm32l100xc.h"
+#elif defined(STM32L151xB)
+ #include "stm32l151xb.h"
+#elif defined(STM32L151xBA)
+ #include "stm32l151xba.h"
+#elif defined(STM32L151xC)
+ #include "stm32l151xc.h"
+#elif defined(STM32L151xCA)
+ #include "stm32l151xca.h"
+#elif defined(STM32L151xD)
+ #include "stm32l151xd.h"
+#elif defined(STM32L151xE)
+ #include "stm32l151xe.h"
+#elif defined(STM32L152xB)
+ #include "stm32l152xb.h"
+#elif defined(STM32L152xBA)
+ #include "stm32l152xba.h"
+#elif defined(STM32L152xC)
+ #include "stm32l152xc.h"
+#elif defined(STM32L152xCA)
+ #include "stm32l152xca.h"
+#elif defined(STM32L152xD)
+ #include "stm32l152xd.h"
+#elif defined(STM32L152xE)
+ #include "stm32l152xe.h"
+#elif defined(STM32L162xC)
+ #include "stm32l162xc.h"
+#elif defined(STM32L162xCA)
+ #include "stm32l162xca.h"
+#elif defined(STM32L162xD)
+ #include "stm32l162xd.h"
+#elif defined(STM32L162xE)
+ #include "stm32l162xe.h"
+#else
+ #error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L1xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/stm32l1xx_hal_conf.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,291 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 5-September-2014
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32l1xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_CONF_H
+#define __STM32L1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)16000000) /*!< NZ32-SC151 has a 16MHz External crystal */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ * This value is the default MSI range value after Reset.
+ */
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)2097000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x000F) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/*#define USE_FULL_ASSERT 1*/
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32l1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32l1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32l1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32l1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32l1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32l1xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32l1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32l1xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32l1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32l1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32l1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32l1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32l1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32l1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32l1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32l1xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32l1xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32l1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32l1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32l1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32l1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32l1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32l1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32l1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32l1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32l1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32l1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32l1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/system_stm32l1xx.c Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,605 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l1xx.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 5-September-2014
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32l1xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * This file configures the system clock as follows:
+ *-----------------------------------------------------------------------------
+ * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
+ * | (external 16 MHz clock) | (internal 16 MHz)
+ * | 2- PLL_HSE_XTAL |
+ * | (external 16 MHz xtal) |
+ *-----------------------------------------------------------------------------
+ * SYSCLK(MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * AHBCLK (MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * APB1CLK (MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * APB2CLK (MHz) | 32 | 32
+ *-----------------------------------------------------------------------------
+ * USB capable (48 MHz precise clock) | YES | NO
+ *-----------------------------------------------------------------------------
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l1xx_system
+ * @{
+ */
+
+/** @addtogroup STM32L1xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32l1xx.h"
+#include "hal_tick.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)16000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+ on STM32L152D_EVAL board as data memory */
+/* #define DATA_IN_ExtSRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Private_Macros
+ * @{
+ */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (0) /* Use external clock */
+#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+uint32_t SystemCoreClock = 32000000; /* Default with HSI. Will be updated if HSE is used */
+const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48};
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+#ifdef DATA_IN_ExtSRAM
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemCoreClock variable.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+ /*!< Set MSION bit */
+ RCC->CR |= (uint32_t)0x00000100;
+
+ /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
+ RCC->CFGR &= (uint32_t)0x88FFC00C;
+
+ /*!< Reset HSION, HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xEEFEFFFE;
+
+ /*!< Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
+ RCC->CFGR &= (uint32_t)0xFF02FFFF;
+
+ /*!< Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#ifdef DATA_IN_ExtSRAM
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif
+
+ /* Configure the Cube driver */
+ SystemCoreClock = 16000000; // At this stage the HSI is used as system clock
+ HAL_Init();
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings */
+ SetSysClock();
+
+ /* Reset the timer to avoid issues after the RAM initialization */
+ TIM_MST_RESET_ON;
+ TIM_MST_RESET_OFF;
+}
+
+/**
+ * @brief Update SystemCoreClock according to Clock Register Values
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
+ * value as defined by the MSI range.
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* MSI used as system clock */
+ msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
+ SystemCoreClock = (32768 * (1 << (msirange + 1)));
+ break;
+ case 0x04: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x08: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x0C: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+ plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
+ pllmul = PLLMulTable[(pllmul >> 18)];
+ plldiv = (plldiv >> 22) + 1;
+
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+ if (pllsource == 0x00)
+ {
+ /* HSI oscillator clock selected as PLL clock entry */
+ SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
+ }
+ else
+ {
+ /* HSE selected as PLL clock entry */
+ SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
+ }
+ break;
+ default: /* MSI used as system clock */
+ msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
+ SystemCoreClock = (32768 * (1 << (msirange + 1)));
+ break;
+ }
+ /* Compute HCLK clock frequency --------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+#ifdef DATA_IN_ExtSRAM
+/**
+ * @brief Setup the external memory controller.
+ * Called in SystemInit() function before jump to main.
+ * This function configures the external SRAM mounted on STM32L152D_EVAL board
+ * This SRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+/*-- GPIOs Configuration -----------------------------------------------------*/
+/*
+ +-------------------+--------------------+------------------+------------------+
+ + SRAM pins assignment +
+ +-------------------+--------------------+------------------+------------------+
+ | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
+ | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
+ | PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
+ | PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
+ | PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
+ | PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
+ | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 |
+ | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+
+ | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 |
+ | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 |
+ | PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+
+ | PD15 <-> FSMC_D1 |--------------------+
+ +-------------------+
+*/
+
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHBENR = 0x000080D8;
+
+ /* Connect PDx pins to FSMC Alternate function */
+ GPIOD->AFR[0] = 0x00CC00CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A0A;
+ /* Configure PDx pins speed to 40 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0F0F;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FSMC Alternate function */
+ GPIOE->AFR[0] = 0xC00000CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA800A;
+ /* Configure PEx pins speed to 40 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC00F;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FSMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 40 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FSMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x00000C00;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00200AAA;
+ /* Configure PGx pins speed to 40 MHz */
+ GPIOG->OSPEEDR = 0x00300FFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*-- FSMC Configuration ------------------------------------------------------*/
+ /* Enable the FSMC interface clock */
+ RCC->AHBENR = 0x400080D8;
+
+ /* Configure and enable Bank1_SRAM3 */
+ FSMC_Bank1->BTCR[4] = 0x00001011;
+ FSMC_Bank1->BTCR[5] = 0x00000300;
+ FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
+/*
+ Bank1_SRAM3 is configured as follow:
+
+ p.FSMC_AddressSetupTime = 0;
+ p.FSMC_AddressHoldTime = 0;
+ p.FSMC_DataSetupTime = 3;
+ p.FSMC_BusTurnAroundDuration = 0;
+ p.FSMC_CLKDivision = 0;
+ p.FSMC_DataLatency = 0;
+ p.FSMC_AccessMode = FSMC_AccessMode_A;
+
+ FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3;
+ FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
+ FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
+ FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+ FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+ FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+ FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
+ FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
+
+ FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
+
+ FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE);
+*/
+
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+void SetSysClock(void)
+{
+ /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+ if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+ {
+ /* 2- If fail try to start with HSE and external xtal */
+ #if USE_PLL_HSE_XTAL != 0
+ if (SetSysClock_PLL_HSE(0) == 0)
+ #endif
+ {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0)
+ {
+ while(1)
+ {
+ // [TODO] Put something here to tell the user that a problem occured...
+ }
+ }
+ }
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* Used to gain time after DeepSleep in case HSI is used */
+ if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ return 0;
+ }
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Enable HSE and HSI48 oscillators and activate PLL with HSE as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
+ if (bypass == 0)
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 16 MHz xtal on OSC_IN/OSC_OUT */
+ }
+ else
+ {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 16 MHz clock on OSC_IN */
+ }
+ RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
+ // SYSCLK = 32 MHz ((16 MHz * 6) / 3)
+ // USBCLK = 48 MHz ((16 MHz * 6) / 2) --> USB OK
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
+ RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3;
+
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //if (bypass == 0)
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
+ //else
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
+
+ return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Enable HSI oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ // SYSCLK = 32 MHz ((16 MHz * 4) / 2)
+ // USBCLK = 64 MHz (16 MHz * 4) --> USB not possible
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4;
+ RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */
+ while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {};
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
+ {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/system_stm32l1xx.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l1xx.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 5-September-2014
+ * @brief CMSIS Cortex-M3 Device System Source File for STM32L1xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l1xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32L1XX_H
+#define __SYSTEM_STM32L1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32L1xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32L1xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L1xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32L1XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/PeripheralNames.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,95 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#if (MX_DEFAULT_SERIAL_PINS == 0)
- //Use B10/B11 as default serial port
- #define STDIO_UART_TX PB_10
- #define STDIO_UART_RX PB_11
- #define STDIO_UART UART_3
-#elif (MX_DEFAULT_SERIAL_PINS == 1)
- //Use A2/A3 as default serial port
- #define STDIO_UART_TX PA_2
- #define STDIO_UART_RX PA_3
- #define STDIO_UART UART_2
-#else
- //Use A2/A3 as default serial port
- #define STDIO_UART_TX PA_2
- #define STDIO_UART_RX PA_3
- #define STDIO_UART UART_2
-#endif
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/PeripheralPins.c Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,192 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN9
- {PB_12, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN18
- {PB_13, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN19
- {PB_14, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN20
- {PB_15, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN21
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN15
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker.
-const PinMap PinMap_PWM[] = {
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
-// {PA_6, PWM_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
- {PB_12, PWM_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_13, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PB_14, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PB_15, PWM_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
-// {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
-// {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/PinNames.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,176 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32l0xx_hal_gpio.h and stm32l0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- LED1 = PB_2,
- LED2 = PB_2,
- LED3 = PB_2,
- LED4 = PB_2,
- USER_BUTTON = PC_3,
-
-#if (MX_DEFAULT_SERIAL_PINS == 0)
- //Use B10/B11 as default serial port
- SERIAL_TX = PB_10,
- SERIAL_RX = PB_11,
- USBTX = PB_10,
- USBRX = PB_11,
-#elif (MX_DEFAULT_SERIAL_PINS == 1)
- //Use A2/A3 as default serial port
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
-#else
- //Use A2/A3 as default serial port
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
-#endif
-
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PB_15,
- SPI_MISO = PB_14,
- SPI_SCK = PB_13,
- SPI_CS = PA_1,
- PWM_OUT = PC_7,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/PortNames.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/device.h Thu Feb 18 09:45:10 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,79 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - - -//MODTRONIX BEGIN - mbed Defines ////////////////////////////////////////////// -//Provide place for adding mbed defines. Alternative to adding them in IDE project properties. -//Add project defines here, or add them to your toolchain compiler preprocessor - - -//MODTRONIX END /////////////////////////////////////////////////////////////// - - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/objects.h Thu Feb 18 09:45:10 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PeripheralNames.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,95 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE
+} UARTName;
+
+#if (MX_DEFAULT_SERIAL_PINS == 0)
+ //Use B10/B11 as default serial port
+ #define STDIO_UART_TX PB_10
+ #define STDIO_UART_RX PB_11
+ #define STDIO_UART UART_3
+#elif (MX_DEFAULT_SERIAL_PINS == 1)
+ //Use A2/A3 as default serial port
+ #define STDIO_UART_TX PA_2
+ #define STDIO_UART_RX PA_3
+ #define STDIO_UART UART_2
+#else
+ //Use A2/A3 as default serial port
+ #define STDIO_UART_TX PA_2
+ #define STDIO_UART_RX PA_3
+ #define STDIO_UART UART_2
+#endif
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PeripheralPins.c Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,192 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN9
+ {PB_12, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN18
+ {PB_13, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN19
+ {PB_14, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN20
+ {PB_15, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN21
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC_IN15
+ {NC, NC, 0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker.
+const PinMap PinMap_PWM[] = {
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+// {PA_6, PWM_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+ {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+ {PB_12, PWM_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_13, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PB_14, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PB_15, PWM_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+// {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+// {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PinNames.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32l0xx_hal_gpio.h and stm32l0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Generic signals namings
+ LED1 = PB_2,
+ LED2 = PB_2,
+ LED3 = PB_2,
+ LED4 = PB_2,
+ USER_BUTTON = PC_3,
+
+#if (MX_DEFAULT_SERIAL_PINS == 0)
+ //Use B10/B11 as default serial port
+ SERIAL_TX = PB_10,
+ SERIAL_RX = PB_11,
+ USBTX = PB_10,
+ USBRX = PB_11,
+#elif (MX_DEFAULT_SERIAL_PINS == 1)
+ //Use A2/A3 as default serial port
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+#else
+ //Use A2/A3 as default serial port
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+#endif
+
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PB_15,
+ SPI_MISO = PB_14,
+ SPI_SCK = PB_13,
+ SPI_CS = PA_1,
+ PWM_OUT = PC_7,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/PortNames.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/device.h Thu Feb 18 10:00:10 2016 +0000 @@ -0,0 +1,79 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + + +//MODTRONIX BEGIN - mbed Defines ////////////////////////////////////////////// +//Provide place for adding mbed defines. Alternative to adding them in IDE project properties. +//Add project defines here, or add them to your toolchain compiler preprocessor + + +//MODTRONIX END /////////////////////////////////////////////////////////////// + + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32L1/TARGET_NZ32_SC151/objects.h Thu Feb 18 10:00:10 2016 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif