Tomo Yamanaka / Mbed OS GR-LYCHEE_mbed-os-client-ZXingSample

Mbed Client sample for GR-LYCHEE where ZXing is incorporated.

Dependencies:   DisplayApp AsciiFont

Fork of GR-PEACH_mbed-os-client-ZXingSample by Renesas

Overview

This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.

Required hardware

Application setup

  1. Select the connection type. For details, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Connection-type.
  2. Set the client credentials. For details, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Client-credentials.
  3. Change Wifi settings. For details, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Wifi-settings.

Building the example

To build this example:

  1. Import this example onto mbed Compiler.
  2. Configure the example in accordance with Application setup.
  3. Compile the example on mbed Compiler and download the resultant binary file.
  4. Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
  5. Copy the binary previously downloaded to your PC to GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
  6. Press the RESET button on the board to run the example.
  7. For verification, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Monitoring-the-application.

Application resources

This example exposes four resources listed below:

  1. 3202/0/5700. Decode result of barcode data input from camera (GET).
  2. 3201/0/5850. Blink function, blinks LED when executed (POST).
  3. 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
  4. 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable (PUT).

security.h

Committer:
<>
Date:
2016-10-06
Revision:
0:eb73febb2bba
Child:
18:0ab91e767950

File content as of revision 0:eb73febb2bba:

/*
 * Copyright (c) 2015 ARM Limited. All rights reserved.
 * SPDX-License-Identifier: Apache-2.0
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef __SECURITY_H__
#define __SECURITY_H__
 
#include <inttypes.h>
 
#define MBED_DOMAIN "DOMAIN"
#define MBED_ENDPOINT_NAME "ENDPOINT_NAME"
 
const uint8_t SERVER_CERT[] = "-----BEGIN CERTIFICATE-----\r\n"
"-----END CERTIFICATE-----\r\n";
 
const uint8_t CERT[] = "-----BEGIN CERTIFICATE-----\r\n"
"-----END CERTIFICATE-----\r\n";
 
const uint8_t KEY[] = "-----BEGIN PRIVATE KEY-----\r\n"
"-----END PRIVATE KEY-----\r\n";
 
#endif //__SECURITY_H__
 
#error "You need to get security.h credentials from connector.mbed.com and replace the content of this security.h file"