Mbed Client sample for GR-LYCHEE where ZXing is incorporated.
Fork of GR-PEACH_mbed-os-client-ZXingSample by
This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.
- GR-LYCHEE ( https://developer.mbed.org/platforms/Renesas-GR-LYCHEE/ )
- Select the connection type. For details, please refer to the following wiki:
- Set the client credentials. For details, please refer to the following wiki:
- Change Wifi settings. For details, please refer to the following wiki:
Building the example
To build this example:
- Import this example onto mbed Compiler.
- Configure the example in accordance with Application setup.
- Compile the example on mbed Compiler and download the resultant binary file.
- Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
- Copy the binary previously downloaded to your PC to GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
- Press the RESET button on the board to run the example.
- For verification, please refer to the following wiki:
This example exposes four resources listed below:
- 3202/0/5700. Decode result of barcode data input from camera (GET).
- 3201/0/5850. Blink function, blinks LED when executed (POST).
- 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
- 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable (PUT).
File content as of revision 0:eb73febb2bba:
/* * Copyright (c) 2016 ARM Limited. All rights reserved. * SPDX-License-Identifier: Apache-2.0 * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_CLIENT_CONFIG_H #define MBED_CLIENT_CONFIG_H // Defines the number of times client should try re-connection towards // Server in case of connectivity loss , also defines the number of CoAP // re-transmission attempts.Default value is 3 #define M2M_CLIENT_RECONNECTION_COUNT 3 // Defines the interval (in seconds) in which client should try re-connection towards // Server in case of connectivity loss , also use the same interval for CoAP // re-transmission attempts. Default value is 5 seconds #define M2M_CLIENT_RECONNECTION_INTERVAL 5 // Defines the keep-alive interval (in seconds) in which client should send keep alive // pings to server while connected through TCP mode. Default value is 300 seconds #define M2M_CLIENT_TCP_KEEPALIVE_TIME 300 // Defines the maximum CoAP messages that client can hold, maximum value is 6 #define SN_COAP_DUPLICATION_MAX_MSGS_COUNT 2 // Defines the size of blockwise CoAP messages that client can handle. // The values that can be defined uust be 2^x and x is at least 4. // Suitable values: 0, 16, 32, 64, 128, 256, 512 and 1024 #define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE 1024 // Many pure LWM2M servers doen't accept 'obs' text in registration message. // While using Client against such servers, this flag can be set to define to // disable client sending 'obs' text for observable resources. #undef COAP_DISABLE_OBS_FEATURE // Disable Bootstrap functionality in client in order to reduce code size, if bootstrap // functionality is not required. #undef M2M_CLIENT_DISABLE_BOOTSTRAP_FEATURE #endif // MBED_CLIENT_CONFIG_H