Tomo Yamanaka / Mbed OS GR-LYCHEE_mbed-os-client-ZXingSample

Mbed Client sample for GR-LYCHEE where ZXing is incorporated.

Dependencies:   DisplayApp AsciiFont

Fork of GR-PEACH_mbed-os-client-ZXingSample by Renesas

Overview

This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.

Required hardware

Application setup

  1. Select the connection type. For details, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Connection-type.
  2. Set the client credentials. For details, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Client-credentials.
  3. Change Wifi settings. For details, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Wifi-settings.

Building the example

To build this example:

  1. Import this example onto mbed Compiler.
  2. Configure the example in accordance with Application setup.
  3. Compile the example on mbed Compiler and download the resultant binary file.
  4. Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
  5. Copy the binary previously downloaded to your PC to GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
  6. Press the RESET button on the board to run the example.
  7. For verification, please refer to the following wiki:
    https://os.mbed.com/users/1050186/code/GR-LYCHEE_mbed-os-client-ZXingSample/wiki/Monitoring-the-application.

Application resources

This example exposes four resources listed below:

  1. 3202/0/5700. Decode result of barcode data input from camera (GET).
  2. 3201/0/5850. Blink function, blinks LED when executed (POST).
  3. 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
  4. 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable (PUT).

mbedtls_mbed_client_config.h

Committer:
1050186
Date:
2018-12-10
Revision:
12:7a199eff6988
Parent:
2:6ec5c1c1d41c

File content as of revision 12:7a199eff6988:

/**
 *  Minimal configuration for using mbedtls as part of mbed-client
 *
 *  NOTE! This is an optimized, minimal configuration for mbed Client.
 *  We know it works with mbed Client but if you want to add more
 *  services/communications to the application yourself - please ensure
 *  you update this configuration accordingly. The default configuration
 *  can be found from mbedTLS Github:
 *
 *  https://github.com/ARMmbed/mbedtls/blob/development/include/mbedtls/config.h
 *
 *
 *  Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *  This file is part of mbed TLS (https://tls.mbed.org)
 */


#ifndef MBEDTLS_CUSTOM_CONFIG_H
#define MBEDTLS_CUSTOM_CONFIG_H

/* System support */
#define MBEDTLS_HAVE_ASM

/* mbed TLS feature support */
#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
#define MBEDTLS_ECP_NIST_OPTIM
#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
#define MBEDTLS_SSL_PROTO_TLS1_2
#define MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
#define MBEDTLS_SSL_EXPORT_KEYS

/* mbed TLS modules */
#define MBEDTLS_AES_C
#define MBEDTLS_ASN1_PARSE_C
#define MBEDTLS_ASN1_WRITE_C
#define MBEDTLS_BIGNUM_C
#define MBEDTLS_CIPHER_C
#define MBEDTLS_CTR_DRBG_C
#define MBEDTLS_ECP_C
#define MBEDTLS_ENTROPY_C
#define MBEDTLS_MD_C
#define MBEDTLS_OID_C
#define MBEDTLS_PK_C
#define MBEDTLS_PK_PARSE_C
#define MBEDTLS_SHA256_C
#define MBEDTLS_SSL_COOKIE_C
#define MBEDTLS_SSL_CLI_C
#define MBEDTLS_SSL_SRV_C
#define MBEDTLS_SSL_TLS_C

// XXX mbedclient needs these: mbedtls_x509_crt_free, mbedtls_x509_crt_init, mbedtls_x509_crt_parse
#define MBEDTLS_X509_USE_C
#define MBEDTLS_X509_CRT_PARSE_C

// XXX: clean these up!!
#define MBEDTLS_SHA512_C
#define MBEDTLS_ECDH_C
#define MBEDTLS_GCM_C

#define MBEDTLS_ECDH_C
#define MBEDTLS_ECDSA_C
#define MBEDTLS_X509_CRT_PARSE_C

// Remove RSA, save 20KB at total.
// However, with Mbed OS 5.9 onwards - UBLOX_EVK_ODIN_W2 must have RSA!
// A more abstract macro define added for that which you can trigger via
// macros -part in the mbed_app.json.
#if !defined(MBED_CONF_RSA_REQUIRED)
    #undef MBEDTLS_RSA_C
    #undef MBEDTLS_PK_RSA_ALT_SUPPORT
    #undef MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
    #undef MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
    #undef MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
#endif // !MBED_CONF_RSA_REQUIRED

// Remove error messages, save 10KB of ROM
#undef MBEDTLS_ERROR_C

// Remove selftesting and save 11KB of ROM
#undef MBEDTLS_SELF_TEST

// Reduces ROM size by 30 kB
#undef MBEDTLS_ERROR_STRERROR_DUMMY
#undef MBEDTLS_VERSION_FEATURES
#undef MBEDTLS_DEBUG_C

// needed for parsing the certificates
#define MBEDTLS_PEM_PARSE_C
// dep of the previous
#define MBEDTLS_BASE64_C

// Reduce IO buffer to save RAM, default is 16KB
#define MBEDTLS_SSL_MAX_CONTENT_LEN 2048

// define to save 8KB RAM at the expense of ROM
#undef MBEDTLS_AES_ROM_TABLES

// Save ROM and a few bytes of RAM by specifying our own ciphersuite list
#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256

#include "mbedtls/check_config.h"

#endif /* MBEDTLS_CUSTOM_CONFIG_H */