| User | Revision | Line number | New contents of line |
|---|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
1
|
/* mbed Microcontroller Library
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
2
|
* Copyright (c) 2017 u-blox
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
3
|
*
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
4
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
5
|
* you may not use this file except in compliance with the License.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
6
|
* You may obtain a copy of the License at
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
7
|
*
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
8
|
* http://www.apache.org/licenses/LICENSE-2.0
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
9
|
*
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
10
|
* Unless required by applicable law or agreed to in writing, software
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
11
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
12
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
13
|
* See the License for the specific language governing permissions and
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
14
|
* limitations under the License.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
15
|
*/
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
16
|
#include "mbed.h"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
17
|
#include "UbloxATCellularInterface.h"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
18
|
#include "UbloxATCellularInterfaceN2xx.h"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
19
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
20
|
// You must select the correct interface library for your board, by
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
21
|
// uncommenting the correct line below. Supported combinations are
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
22
|
// indicated with a "Y" in the table below.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
23
|
//
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
24
|
// C030_U201 C030_N211 C027 C030_R41XM
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
25
|
// UbloxATCellularInterface Y - Y Y
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
26
|
// UbloxATCellularInterfaceN2xx - Y - -
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
27
|
// Note: the N211 module supports only UDP, not TCP
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
28
|
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
29
|
// UbloxATCellularInterface and UbloxATCellularInterfaceN2xx
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
30
|
// uses an IP stack on the cellular module and hence uses less RAM (significant on C027).
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
31
|
// This also allows other AT command operations (e.g. sending an SMS) to happen
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
32
|
// during a data transfer (for which you should replace the
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
33
|
// UbloxATCellularInterface library with the UbloxATCellularInterfaceExt
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
34
|
// library). However, it is slower than using the LWIP/PPP on the mbed
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
35
|
// MCU interface since more string parsing is required.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
36
|
#define INTERFACE_CLASS UbloxATCellularInterface
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
37
|
//#define INTERFACE_CLASS UbloxATCellularInterfaceN2xx
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
38
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
39
|
// The credentials of the SIM in the board. If PIN checking is enabled
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
40
|
// for your SIM card you must set this to the required PIN.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
41
|
#define PIN "0000"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
42
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
43
|
// Network credentials. You should set this according to your
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
44
|
// network/SIM card. For C030 non-N2xx boards, leave the parameters as NULL
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
45
|
// otherwise, if you do not know the APN for your network, you may
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
46
|
// either try the fairly common "internet" for the APN (and leave the
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
47
|
// username and password NULL), or you may leave all three as NULL and then
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
48
|
// a lookup will be attempted for a small number of known networks
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
49
|
// (see APN_db.h in mbed-os/features/netsocket/cellular/utils).
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
50
|
#define APN NULL
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
51
|
#define USERNAME NULL
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
52
|
#define PASSWORD NULL
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
53
|
#define TCP_SERVER "os.mbed.com"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
54
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
55
|
// Uncomment the following line to enable Icellular Current measurement.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
56
|
// Current drawn by modem is printed on serial every 2 seconds.
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
57
|
#define CURRENT_MEASUREMENT
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
58
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
59
|
// LEDs
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
60
|
DigitalOut ledRed(LED1, 1);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
61
|
DigitalOut ledGreen(LED2, 1);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
62
|
DigitalOut ledBlue(LED3, 1);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
63
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
64
|
// The user button
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
65
|
volatile bool buttonPressed = false;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
66
|
#ifdef TARGET_UBLOX_C030_R412M
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
67
|
volatile bool modem_asleep = false;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
68
|
#ifdef CURRENT_MEASUREMENT
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
69
|
AnalogIn ain_icellular(MDMCURRENTSENSE);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
70
|
Thread icell_thread;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
71
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
72
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
73
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
74
|
static void good() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
75
|
ledGreen = 0;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
76
|
ledBlue = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
77
|
ledRed = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
78
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
79
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
80
|
static void bad() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
81
|
ledRed = 0;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
82
|
ledGreen = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
83
|
ledBlue = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
84
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
85
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
86
|
static void event() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
87
|
ledBlue = 0;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
88
|
ledRed = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
89
|
ledGreen = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
90
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
91
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
92
|
static void pulseEvent() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
93
|
event();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
94
|
wait_ms(500);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
95
|
good();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
96
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
97
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
98
|
static void ledOff() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
99
|
ledBlue = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
100
|
ledRed = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
101
|
ledGreen = 1;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
102
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
103
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
104
|
static void printNtpTime(char * buf, int len)
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
105
|
{
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
106
|
time_t timestamp = 0;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
107
|
struct tm *localTime;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
108
|
char timeString[25];
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
109
|
time_t TIME1970 = 2208988800U;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
110
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
111
|
if (len >= 43) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
112
|
timestamp |= ((int) *(buf + 40)) << 24;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
113
|
timestamp |= ((int) *(buf + 41)) << 16;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
114
|
timestamp |= ((int) *(buf + 42)) << 8;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
115
|
timestamp |= ((int) *(buf + 43));
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
116
|
timestamp -= TIME1970;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
117
|
localTime = localtime(×tamp);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
118
|
if (localTime) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
119
|
if (strftime(timeString, sizeof(timeString), "%a %b %d %H:%M:%S %Y", localTime) > 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
120
|
printf("NTP timestamp is %s.\n", timeString);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
121
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
122
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
123
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
124
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
125
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
126
|
static void cbButton()
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
127
|
{
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
128
|
buttonPressed = true;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
129
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
130
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
131
|
void init_modem(INTERFACE_CLASS *interface) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
132
|
int x;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
133
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
134
|
for (x = 0; interface->connect(PIN) != 0; x++) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
135
|
if (x > 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
136
|
bad();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
137
|
printf("Retrying (have you checked that an antenna is plugged in and your APN is correct?)...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
138
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
139
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
140
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
141
|
#ifdef TARGET_UBLOX_C030_R412M
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
142
|
void psm_going_in_cb(void *param)
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
143
|
{
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
144
|
printf("PSM callback function:: Modem going in to sleep\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
145
|
modem_asleep = true;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
146
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
147
|
#ifdef CURRENT_MEASUREMENT
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
148
|
float calculate_icellular_samples() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
149
|
float ain=0.0f;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
150
|
float icellular_val;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
151
|
const int c_number_of_analog_samples = 50;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
152
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
153
|
ain = 0;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
154
|
for(int i = 0; i < c_number_of_analog_samples; i++) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
155
|
ain = (ain + ain_icellular.read());
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
156
|
Thread::wait(2);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
157
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
158
|
ain = ain/c_number_of_analog_samples;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
159
|
icellular_val = (ain*1.8*1000)/7.0f;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
160
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
161
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
162
|
printf("Voltage in mV: %f\n", icellular_val * 7.0f);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
163
|
printf("Current draw in mA: %f\n\n", icellular_val);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
164
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
165
|
return icellular_val;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
166
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
167
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
168
|
void icell_thread_handler() {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
169
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
170
|
while(1) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
171
|
Thread::wait(2000);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
172
|
calculate_icellular_samples();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
173
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
174
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
175
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
176
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
177
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
178
|
/* This example program for the u-blox C030-R410M board instantiates
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
179
|
* the UbloxATCellularInterface and uses it to make a simple sockets
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
180
|
* connection to a server, using 2.pool.ntp.org for UDP and
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
181
|
* developer.mbed.org for TCP. It also showcases the 3GPP PSM feature.
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
182
|
* For a more comprehensive example, where higher layer protocols
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
183
|
* make use of the same sockets interface, see example-ublox-mbed-client.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
184
|
* Progress may be monitored with a serial terminal running at 9600 baud.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
185
|
* The LED on the C030 board will turn green when this program is
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
186
|
* operating correctly, pulse blue when a sockets operation is completed
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
187
|
* and turn red if there is a failure.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
188
|
*/
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
189
|
int main()
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
190
|
{
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
191
|
#ifdef TARGET_UBLOX_C030_R412M
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
192
|
#ifdef CURRENT_MEASUREMENT
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
193
|
//current monitoring using Icellular
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
194
|
icell_thread.start(icell_thread_handler);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
195
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
196
|
int status = 0, pt = 0, at = 0;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
197
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
198
|
INTERFACE_CLASS *interface = new INTERFACE_CLASS();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
199
|
// If you need to debug the cellular interface, comment out the
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
200
|
// instantiation above and uncomment the one below.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
201
|
// For the N2xx interface, change xxx to MBED_CONF_UBLOX_CELL_BAUD_RATE,
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
202
|
// while for the non-N2xx interface change it to MBED_CONF_UBLOX_CELL_N2XX_BAUD_RATE.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
203
|
// INTERFACE_CLASS *interface = new INTERFACE_CLASS(MDMTXD, MDMRXD,
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
204
|
// xxx,
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
205
|
// true);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
206
|
#ifndef TARGET_UBLOX_C030_N211
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
207
|
TCPSocket sockTcp;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
208
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
209
|
UDPSocket sockUdp;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
210
|
SocketAddress udpServer;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
211
|
SocketAddress udpSenderAddress;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
212
|
SocketAddress tcpServer;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
213
|
char buf[1024];
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
214
|
int x;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
215
|
#ifdef TARGET_UBLOX_C027
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
216
|
// No user button on C027
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
217
|
InterruptIn userButton(NC);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
218
|
#else
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
219
|
InterruptIn userButton(SW0);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
220
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
221
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
222
|
// Attach a function to the user button
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
223
|
userButton.rise(&cbButton);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
224
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
225
|
good();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
226
|
printf("Initializing modem, please wait.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
227
|
if (interface->init(PIN) == false) //setup modem
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
228
|
{
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
229
|
bad();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
230
|
printf("Failed to Initialize modem\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
231
|
while(1);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
232
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
233
|
printf("Initialization complete.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
234
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
235
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
236
|
#ifdef TARGET_UBLOX_C030_R412M
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
237
|
printf("Enabling PSM...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
238
|
if (interface->set_power_saving_mode(120, 30)) { //enable PSM
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
239
|
printf("PSM enabled. Attaching CB function and rebooting the module\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
240
|
interface->attach_cb_psm_going_in(&psm_going_in_cb, NULL); //register callback
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
241
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
242
|
//reset modem so that PSM settings can take effect
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
243
|
interface->reboot_modem();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
244
|
wait_ms(5000); //give modem a little time
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
245
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
246
|
printf("please wait up to 180 seconds for network registration to complete...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
247
|
//try to re-init modem and perform registration
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
248
|
for (x = 0; interface->connect(PIN) != 0; x++) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
249
|
if (x > 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
250
|
bad();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
251
|
printf("Retrying (have you checked that an antenna is plugged in and your APN is correct?)...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
252
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
253
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
254
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
255
|
interface->get_power_saving_mode(&status, &pt, &at); //read assigned values
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
256
|
printf("PSM status: %s\nAssigned Periodic TAU: %d\nAssigned Active time: %d\n", status ? "enabled" : "disabled", pt, at);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
257
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
258
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
259
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
260
|
//sometimes modem goes in to PSM before we can do any UDP/TCP transfers
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
261
|
if (modem_asleep == true) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
262
|
printf("Modem is in PSM, waking up and initializing it\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
263
|
interface->wakeup_modem(); //this wakes up the modem and also CellularBase gets synced with modem state.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
264
|
init_modem(interface);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
265
|
modem_asleep = false;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
266
|
printf("Initialization complete\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
267
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
268
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
269
|
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
270
|
printf("\nGetting the IP address of \"" TCP_SERVER "\" and \"2.pool.ntp.org\"...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
271
|
if ((interface->gethostbyname("2.pool.ntp.org", &udpServer) == 0) &&
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
272
|
(interface->gethostbyname(TCP_SERVER, &tcpServer) == 0)) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
273
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
274
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
275
|
udpServer.set_port(123);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
276
|
printf("\"2.pool.ntp.org\" address: %s on port %d.\n", udpServer.get_ip_address(), udpServer.get_port());
|
| wajahat.abbas@u-blox.com |
2:500c4fe5b9a4
|
277
|
printf("\"" TCP_SERVER "\" address: %s on port %d.\n", tcpServer.get_ip_address(), tcpServer.get_port());
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
278
|
tcpServer.set_port(80);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
279
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
280
|
printf("Performing socket operations in a loop (until the user button is pressed on C030 or forever on C027)...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
281
|
while (!buttonPressed) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
282
|
#ifdef TARGET_UBLOX_C030_R412M
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
283
|
if (modem_asleep == true) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
284
|
printf("Modem is in PSM, waking up and initializing it\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
285
|
interface->wakeup_modem(); //this wakes up the modem and also CellularBase gets synced with modem state.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
286
|
init_modem(interface);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
287
|
modem_asleep = false;
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
288
|
printf("Initialization complete\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
289
|
wait_ms(5000);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
290
|
} else {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
291
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
292
|
printf("Opening a UDP socket...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
293
|
if ((sockUdp.open(interface)) == 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
294
|
// UDP Sockets
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
295
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
296
|
printf("UDP socket open.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
297
|
sockUdp.set_timeout(20000);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
298
|
printf("Sending time request to \"2.pool.ntp.org\" over UDP socket...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
299
|
memset (buf, 0, sizeof(buf));
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
300
|
*buf = '\x1b';
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
301
|
if (sockUdp.sendto(udpServer, (void *) buf, 48) == 48) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
302
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
303
|
printf("Socket send completed, waiting for UDP response...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
304
|
x = sockUdp.recvfrom(&udpSenderAddress, buf, sizeof (buf));
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
305
|
if (x > 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
306
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
307
|
printf("Received %d byte response from server %s on UDP socket:\n"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
308
|
"-------------------------------------------------------\n",
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
309
|
x, udpSenderAddress.get_ip_address());
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
310
|
printNtpTime(buf, x);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
311
|
printf("-------------------------------------------------------\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
312
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
313
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
314
|
printf("Closing socket...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
315
|
sockUdp.close();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
316
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
317
|
printf("Socket closed.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
318
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
319
|
#ifndef TARGET_UBLOX_C030_N211
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
320
|
printf("Opening a TCP socket...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
321
|
if ((sockTcp.open(interface)) == 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
322
|
// TCP Sockets
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
323
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
324
|
printf("TCP socket open.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
325
|
sockTcp.set_timeout(10000);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
326
|
printf("Connecting socket to %s on port %d...\n", tcpServer.get_ip_address(), tcpServer.get_port());
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
327
|
if (sockTcp.connect(tcpServer) == 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
328
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
329
|
printf("Connected, sending HTTP GET request to \"developer.mbed.org\" over socket...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
330
|
strcpy (buf, "GET /media/uploads/mbed_official/hello.txt HTTP/1.0\r\n\r\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
331
|
// Note: since this is a short string we can send it in one go as it will
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
332
|
// fit within the default buffer sizes. Normally you should call sock.send()
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
333
|
// in a loop until your entire buffer has been sent.
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
334
|
if (sockTcp.send((void *) buf, strlen(buf)) == (int) strlen(buf)) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
335
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
336
|
printf("Socket send completed, waiting for response...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
337
|
x = sockTcp.recv(buf, sizeof (buf));
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
338
|
if (x > 0) {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
339
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
340
|
printf("Received %d byte response from server on TCP socket:\n"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
341
|
"----------------------------------------------------\n%.*s"
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
342
|
"----------------------------------------------------\n",
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
343
|
x, x, buf);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
344
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
345
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
346
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
347
|
printf("Closing socket...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
348
|
sockTcp.close();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
349
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
350
|
printf("Socket closed.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
351
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
352
|
#ifdef TARGET_UBLOX_C030_R412M
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
353
|
while(modem_asleep == false) { //modem is awake, let it go to sleep again
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
354
|
printf("Waiting for modem to go to PSM sleep\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
355
|
wait_ms(5000);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
356
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
357
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
358
|
#endif /* TARGET_UBLOX_C030_R412M */
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
359
|
#endif /* TARGET_UBLOX_C030_N211 */
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
360
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
361
|
wait_ms(5000);
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
362
|
#ifndef TARGET_UBLOX_C027
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
363
|
printf("\n\n[Checking if user button has been pressed]\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
364
|
#endif
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
365
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
366
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
367
|
pulseEvent();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
368
|
printf("User button was pressed, stopping...\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
369
|
interface->disconnect();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
370
|
ledOff();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
371
|
printf("Stopped.\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
372
|
} else {
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
373
|
bad();
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
374
|
printf("Unable to get IP address of \"developer.mbed.org\" or \"2.pool.ntp.org\".\n");
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
375
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
376
|
}
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
377
|
|
| wajahat.abbas@u-blox.com |
0:4858efb34078
|
378
|
// End Of File
|
u-blox
