File content as of revision 8:bd9096c4784c:

#include "mbed.h"
#include "C12832.h"
#include "nsdl_support.h"
#include "dbg.h"
// Include various resources
#include "temperature.h"
#include "light.h"
#include "gps.h"
#include "relay.h"

#include "UDPSocket.h"
#include "Endpoint.h"

//------------------------------------------------------------------------------------
// You need to configure these cellular modem / SIM parameters.
// These parameters are ignored for LISA-C200 variants and can be left NULL.
//------------------------------------------------------------------------------------
#include "MDM.h"
//! Set your secret SIM pin here (e.g. "1234"). Check your SIM manual.
#define SIMPIN      NULL
/*! The APN of your network operator SIM, sometimes it is "internet" check your 
    contract with the network operator. You can also try to look-up your settings in 
    google: https://www.google.de/search?q=APN+list */
#define APN         "gprs.swisscom.ch"
//! Set the user name for your APN, or NULL if not needed
#define USERNAME    NULL
//! Set the password for your APN, or NULL if not needed
#define PASSWORD    NULL 
//------------------------------------------------------------------------------------

static C12832 lcd(D11, D13, D12, D7, D10);

// ****************************************************************************
// Configuration section

// NSP configuration
/* Change this IP address to that of your NanoService Platform installation */
static const char* NSP_ADDRESS = "nanoservice-demo.mbed.org"; /* demo NSP, web interface at http://nanoservice-demo.mbed.org*/ 
static const int NSP_PORT = 5683;
char endpoint_name[16] = "mbed-";
uint8_t ep_type[] = {"mbed_device"};
uint8_t lifetime_ptr[] = {"1200"};

// ****************************************************************************
// NSP initialization

UDPSocket server;
Endpoint nsp;

static void nsp_init()
{
    server.init();
    server.bind(NSP_PORT);

    nsp.set_address(NSP_ADDRESS, NSP_PORT);
    
    NSDL_DEBUG("name: %s", endpoint_name);
    NSDL_DEBUG("NSP=%s - port %d\n", NSP_ADDRESS, NSP_PORT);
    NSDL_DEBUG("NSDL Demo Portal\n  Website:  http://%s\n  Username: demo\n  Password: demo\n", NSP_ADDRESS);
    
    lcd.locate(0,22);
    lcd.printf("EP name:%s\n", endpoint_name);
}

// ****************************************************************************
// Resource creation

static int create_resources()
{
    sn_nsdl_resource_info_s *resource_ptr = NULL;
    sn_nsdl_ep_parameters_s *endpoint_ptr = NULL;
    
    NSDL_DEBUG("Creating resources");

    /* Create resources */
    resource_ptr = (sn_nsdl_resource_info_s*)nsdl_alloc(sizeof(sn_nsdl_resource_info_s));
    if(!resource_ptr)
        return 0;
    memset(resource_ptr, 0, sizeof(sn_nsdl_resource_info_s));

    resource_ptr->resource_parameters_ptr = (sn_nsdl_resource_parameters_s*)nsdl_alloc(sizeof(sn_nsdl_resource_parameters_s));
    if(!resource_ptr->resource_parameters_ptr)
    {
        nsdl_free(resource_ptr);
        return 0;
    }
    memset(resource_ptr->resource_parameters_ptr, 0, sizeof(sn_nsdl_resource_parameters_s));

    // Static resources
    nsdl_create_static_resource(resource_ptr, sizeof("dev/mfg")-1, (uint8_t*) "dev/mfg", 0, 0,  (uint8_t*) "Sensinode", sizeof("Sensinode")-1);
    nsdl_create_static_resource(resource_ptr, sizeof("dev/mdl")-1, (uint8_t*) "dev/mdl", 0, 0,  (uint8_t*) "NSDL-C mbed device", sizeof("NSDL-C mbed device")-1);

    // Dynamic resources
    create_temperature_resource(resource_ptr);
    create_light_resource(resource_ptr);
    create_gps_resource(resource_ptr);
    create_relay_resource(resource_ptr);

        /* Register with NSP */
    endpoint_ptr = nsdl_init_register_endpoint(endpoint_ptr, (uint8_t*)endpoint_name, ep_type, lifetime_ptr);
    if(sn_nsdl_register_endpoint(endpoint_ptr) != 0)
        printf("NSP registering failed\r\n");
    else
        printf("NSP registering OK\r\n");
    nsdl_clean_register_endpoint(&endpoint_ptr);

    nsdl_free(resource_ptr->resource_parameters_ptr);
    nsdl_free(resource_ptr);
    return 1;
}

// ****************************************************************************
// Program entry point

int main()
{
    lcd.cls();
    lcd.locate(0,0);
    lcd.printf("mbed NanoService demo");
    NSDL_DEBUG("mbed NanoService Example App 0.1\n");
    
    MDMSerial mdm;
    //mdm.setDebug(4); // enable this for debugging issues 
    if (!mdm.connect(SIMPIN, APN,USERNAME,PASSWORD))
        return -1;

    lcd.locate(0,11);

    // Initialize NSP node
    nsp_init();
    
    // Initialize NSDL stack
    nsdl_init();
    
    // Create NSDL resources
    create_resources();
    
    // Run the NSDL event loop (never returns)
    nsdl_event_loop();

    mdm.disconnect();
    mdm.powerOff();
    
    while(true);
        
}