u-blox / Mbed 2 deprecated C027_ModemTransparentSerial

This example establishes a transparent link between the mbed serial port and the modem (LISA or SARA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html

Dependencies:   mbed

Install mbed Windows Drivers

Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration

Diff: main.cpp

Revision:
4:fafdcaf842ee
Parent:
2:1970ac045983
Child:
5:1141d3cfd1ef
--- a/main.cpp	Wed Nov 06 10:48:56 2013 +0000
+++ b/main.cpp	Fri Dec 06 09:56:13 2013 +0000
@@ -9,9 +9,6 @@
     // open the mdm serial port
     Serial mdm(MDMTXD, MDMRXD);
     mdm.baud(MDMBAUD);
-    // tell the modem that we can always receive data
-    DigitalOut mdmRts(MDMRTS);
-    mdmRts = 0; // (not using flow control)
     
     // open the PC serial port and (use the same baudrate)
     Serial pc(USBTX, USBRX);