Example program for SD card shield on SPI pins D10-D13
Dependencies: SDFileSystem mbed
The program uses the standard Arduino shields SPI pins:
Signal | Pin |
SCK | D13 |
MISO | D12 |
MOSI | D11 |
CS | D10 |
Note that this shield doesn't use the standard SPI pins, but relies on non-standard 6-pin SPI header located at the shield bottom. To make it work you will have to bridge those pins as shown on the image (the green SPI pins).
Signal | Pin 1 | Pin 2 |
MOSI | D11 | SPI4 |
MISO | D12 | SPI1 |
SCK | D13 | SPI3 |
CS | D10 | D4 |
mbed.bld
- Committer:
- screamer
- Date:
- 2014-03-17
- Revision:
- 0:525c842a3c89
- Child:
- 1:93d41c73ac7d
File content as of revision 0:525c842a3c89:
http://mbed.org/users/mbed_official/code/mbed/builds/8e73be2a2ac1