Example program for SD card shield on SPI pins D10-D13
Dependencies: SDFileSystem mbed
The program uses the standard Arduino shields SPI pins:
Signal | Pin |
SCK | D13 |
MISO | D12 |
MOSI | D11 |
CS | D10 |
Note that this shield doesn't use the standard SPI pins, but relies on non-standard 6-pin SPI header located at the shield bottom. To make it work you will have to bridge those pins as shown on the image (the green SPI pins).
Signal | Pin 1 | Pin 2 |
MOSI | D11 | SPI4 |
MISO | D12 | SPI1 |
SCK | D13 | SPI3 |
CS | D10 | D4 |
SDFileSystem.lib
- Committer:
- screamer
- Date:
- 2015-02-13
- Revision:
- 4:0928d6e00f01
- Parent:
- 0:525c842a3c89
File content as of revision 4:0928d6e00f01:
http://mbed.org/users/mbed_official/code/SDFileSystem/#7b35d1709458