Diff: targets/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h

Revision:

0:098463de4c5d

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h	Wed Jan 25 20:34:15 2017 +0000
@@ -0,0 +1,159 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART0,
+    UART1,
+    UART2,
+    UART3,
+    UART4,
+    UART5,
+    UART6,
+    UART7,
+} UARTName;
+
+// PWMType & 1 == 1 then have to use PWDTR[12] == 1
+typedef enum {
+    PWM1A  = 0,
+    PWM1B,
+    PWM1C,
+    PWM1D,
+    PWM1E,
+    PWM1F,
+    PWM1G,
+    PWM1H,
+    PWM2A  = 0x10,
+    PWM2B,
+    PWM2C,
+    PWM2D,
+    PWM2E,
+    PWM2F,
+    PWM2G,
+    PWM2H,
+} PWMType;
+
+typedef enum {
+    TIOC0A  = 0,
+    TIOC0B,
+    TIOC0C,
+    TIOC0D,
+    TIOC1A = 0x10,
+    TIOC1B,
+    TIOC2A = 0x20,
+    TIOC2B,
+    TIOC3A = 0x30,
+    TIOC3B,
+    TIOC3C,
+    TIOC3D,
+    TIOC4A = 0x40,
+    TIOC4B,
+    TIOC4C,
+    TIOC4D,
+} MTU2_PWMType;
+
+typedef enum {
+    PWM0_PIN  = 0,
+    PWM1_PIN,
+    PWM2_PIN,
+    PWM3_PIN,
+    PWM4_PIN,
+    PWM5_PIN,
+    PWM6_PIN,
+    PWM7_PIN,
+    PWM8_PIN,
+    PWM9_PIN,
+    PWM10_PIN,
+    PWM11_PIN,
+    PWM12_PIN,
+    PWM13_PIN,
+    MTU2_PWM0_PIN = 0x20,
+    MTU2_PWM1_PIN,
+    MTU2_PWM2_PIN,
+    MTU2_PWM3_PIN,
+    MTU2_PWM4_PIN,
+    MTU2_PWM5_PIN,
+    MTU2_PWM6_PIN,
+    MTU2_PWM7_PIN,
+    MTU2_PWM8_PIN,
+    MTU2_PWM9_PIN,
+    MTU2_PWM10_PIN,
+    MTU2_PWM11_PIN,
+    MTU2_PWM12_PIN,
+    MTU2_PWM13_PIN,
+    MTU2_PWM14_PIN,
+    MTU2_PWM15_PIN,
+    MTU2_PWM16_PIN,
+    MTU2_PWM17_PIN,
+    MTU2_PWM18_PIN,
+    MTU2_PWM19_PIN,
+    MTU2_PWM20_PIN,
+    MTU2_PWM21_PIN,
+} PWMName;
+
+typedef enum {
+    AN0= 0,
+    AN1= 1,
+    AN2= 2,
+    AN3= 3,
+    AN4= 4,
+    AN5= 5,
+    AN6= 6,
+    AN7= 7,
+} ADCName;
+
+typedef enum {
+    SPI_0 = 0,
+    SPI_1,
+    SPI_2,
+    SPI_3,
+} SPIName;
+
+typedef enum {
+    I2C_0 = 0,
+    I2C_1,
+    I2C_2,
+    I2C_3 
+} I2CName;
+
+typedef enum {
+    CAN_0 = 0,
+    CAN_1,
+    CAN_2,
+    CAN_3, 
+    CAN_4
+} CANName;
+
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART2
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif