SNIC UART Interface library: Serial to Wi-Fi library for Murata TypeYD Wi-Fi module. For more information about TypeYD: http://www.murata.co.jp/products/microwave/module/lbwb1zzydz/index.html

Dependents:   SNIC-xively-jumpstart-demo SNIC-FluentLogger-example TCPEchoServer murataDemo ... more

Fork of YDwifiInterface by Takao Kishino

Revision:
12:0254eaccfda2
Parent:
11:c49007d49e52
Child:
13:53e6471d5753
--- a/SNIC/SNICwifi.h	Wed Mar 19 01:48:37 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,195 +0,0 @@
-#ifndef _SNIC_WIFI_H_
-#define _SNIC_WIFI_H_
-
-#include "mbed.h"
-#include "rtos.h"
-#include "RawSerial.h"
-
-#include "SNICwifiUartCommand.h"
-//#include "CBuffer.h"
-
-namespace murata_wifi
-{
-#define UART_REQUEST_PAYLOAD_MAX 256
-
-#define MEMPOOL_BLOCK_SIZE  2048
-#define MEMPOOL_PAYLOAD_NUM 1
-typedef struct
-{
-    unsigned char buf[MEMPOOL_BLOCK_SIZE];
-}tagMEMPOOL_BLOCK_T;
-
-/** Wi-Fi security
- */
-typedef enum SECURITY {
-    /** Securiry Open */
-    e_SEC_OPEN       = 0x00,
-    /** Securiry WEP */
-    e_SEC_WEP        = 0x01,
-    /** Securiry WPA-PSK(TKIP) */
-    e_SEC_WPA_TKIP   = 0x02,
-    /** Securiry WPA2-PSK(AES) */
-    e_SEC_WPA2_AES   = 0x04,
-    /** Securiry WPA2-PSK(TKIP/AES) */
-    e_SEC_WPA2_MIXED = 0x06,
-    /** Securiry WPA-PSK(AES) */
-    e_SEC_WPA_AES    = 0x07
-}E_SECURITY;
-
-/** Wi-Fi Network type
- */
-typedef enum NETWORK_TYPE {
-    /** Infrastructure */
-    e_INFRA = 0,
-    /** Adhoc */
-    e_ADHOC = 1
-}E_NETWORK_TYPE;
-
-/** Wi-Fi status
- */
-typedef enum WIFI_STATUS {
-    /** Wi-Fi OFF */
-    e_STATUS_OFF = 0,
-    /** No network */
-    e_NO_NETWORK,
-    /** Connected to AP (STA mode) */
-    e_STA_JOINED,
-    /** Started  on AP mode */
-    e_AP_STARTED
-}E_WIFI_STATUS;
-
-/** GEN_FW_VER_GET_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-}tagGEN_FW_VER_GET_REQ_T;
-
-/** SNIC_INIT_REQ */
-typedef struct
-{
-    unsigned char  cmd_sid;
-    unsigned char  seq;
-    unsigned short buf_size;
-}tagSNIC_INIT_REQ_T;
-
-/** WIFI_ON_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-    char country[COUNTRYC_CODE_LENTH];
-}tagWIFI_ON_REQ_T;
-
-/** WIFI_OFF_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-}tagWIFI_OFF_REQ_T;
-
-/** WIFI_DISCONNECT_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-}tagWIFI_DISCONNECT_REQ_T;
-
-/** WIFI_GET_STA_RSSI_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-}tagWIFI_GET_STA_RSSI_REQ_T;
-
-/** WIFI_GET_STATUS_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-    unsigned char interface;
-}tagWIFI_GET_STATUS_REQ_T;
-
-/** WIFI_SCAN_REQ Command */
-typedef struct 
-{
-    unsigned char cmd_sid;
-    unsigned char seq;
-    unsigned char scan_type;
-    unsigned char bss_type;
-    unsigned char bssid[BSSID_MAC_LENTH];
-    unsigned char chan_list;
-    unsigned char ssid[SSID_MAX_LENGTH+1];
-}tagWIFI_SCAN_REQ_T;
-
-/** C_SNICwifi class
- */
-class C_SNICwifi
-{
-
-public:
-    C_SNICwifiUartCommand mUartCommand;
-
-    /** Get buffer for command from memory pool.
-        @return Pointer of buffer
-     */
-    tagMEMPOOL_BLOCK_T *getAlocCmdBuf();
-    
-    /** Release buffer to memory pool.
-        @param buf_p Pointer of buffer
-     */
-    void freeCmdBuf( tagMEMPOOL_BLOCK_T *buf_p );
-
-    /** Initialize UART
-    */
-    int initUart( PinName tx, PinName rx, int baud );
-
-    /** Send data to UART
-        @param len  Length of send data
-        @param data Pointer of send data
-        @return 0:success/other:fail
-    */
-    int sendUart( unsigned int len, unsigned char *data );
-
-    /** Preparation of the UART command
-        @param cmd_id           UART Command ID
-        @param cmd_sid          UART Command  SubID
-        @param req_buf_p        Pointer of UART request buffer
-        @param req_buf_len      Length of UART request buffer
-        @param response_buf_p   Pointer of UART response buffer
-        @param command_p        Pointer of UART command[output]
-        @return Length of UART command.
-    */
-    unsigned int preparationSendCommand( unsigned char cmd_id, unsigned char cmd_sid
-                                , unsigned char *req_buf_p,    unsigned int req_buf_len
-                                , unsigned char *response_buf_p, unsigned char *command_p );
-
-    /** Get an instance of the C_SNICwifi class.
-        @return Instance of the C_SNICwifi class
-        @note   Please do not create an instance in the default constructor this class.
-                Please use this method when you want to get an instance.
-    */
-    static C_SNICwifi *getInstance();
-
-protected:
-    static C_SNICwifi     *mInstance_p;
-    Thread                *mUartRecvThread_p;
-    RawSerial             *mUart_p;
-    Mutex                 mUartMutex;
-//    DigitalInOut        mModuleReset;
- 
-private:
-    /** MemoryPool for payload of UART response */
-    MemoryPool<tagMEMPOOL_BLOCK_T, MEMPOOL_PAYLOAD_NUM>     mMemPoolPayload;
-  
-    /** Constructor
-     */
-    C_SNICwifi();
-
-    /** Receiving thread of UART
-    */
-    static void uartRecvThread( void const *args_p );
-};
-}
-
-#endif
\ No newline at end of file