Nanostack Border Router is a generic mbed border router implementation that provides the 6LoWPAN ND or Thread border router initialization logic.
--- a/README.md Mon Aug 27 10:45:25 2018 +0100 +++ b/README.md Fri Aug 31 14:00:24 2018 +0100 @@ -26,6 +26,7 @@ 1. Clone this repository. 1. Run `mbed deploy`. +1. Add connectivity driver, if not provided by Mbed OS 1. Select target platform. 1. Select toolchain. 1. Configure. @@ -45,6 +46,20 @@ $ mbed compile ``` +### Adding connectivity driver + +This application requires 802.15.4 RF driver to be provided for the networking stack. Driver can be either external, or provided by the Mbed OS. + +External driver can be added by calling + +``` +mbed add <driver> +``` + +For example MCR20A RF driver is added by calling `mbed add mcr20a-rf-driver` + +Atmel AT86RF driver is added by calling `mbed add atmel-rf-driver` + ## Selecting the target platform The target platform is the hardware on which the border router runs. There are number of target platforms already available for you in the mbed OS.