mbed-os-examples / Mbed OS nanostack-border-router-mbed5

Nanostack Border Router is a generic mbed border router implementation that provides the 6LoWPAN ND or Thread border router initialization logic.

configs/6lowpan_Atmel_RF.json

Committer:
mbed_official
Date:
2019-11-27
Revision:
108:0c14bd1d3334
Parent:
105:d9f83743ed4f

File content as of revision 108:0c14bd1d3334:

{
    "config": {
        "radio-type":{
            "help": "options are ATMEL, MCR20, SPIRIT1",
            "value": "ATMEL"
        },
        "backhaul-driver": {
            "help": "options are ETH, SLIP, EMAC, CELL",
            "value": "EMAC"
        },
        "mesh-mode": {
            "help": "Mesh networking mode. Options are LOWPAN_ND and THREAD",
            "value": "LOWPAN_ND"
        },
        "backhaul-mac-src": {
            "help": "Where to get EUI48 address. Options are BOARD, CONFIG",
            "value": "BOARD"
        },
        "backhaul-mld": {
            "help": "Enable proxying Multicast Listener Discovery messages to backhaul network",
            "value": "false"
        },
        "nanostack_extended_heap": {
            "help": "Add additional memory region to nanostack heap. Valid only for selected platforms. Region size may vary depending of the toolchain.",
            "value": false
        },
        "backhaul-mac": "{0x02, 0x00, 0x00, 0x00, 0x00, 0x01}",
        "slip_hw_flow_control": "false",
        "slip_serial_baud_rate": "921600",
        "debug-trace": "false",
        "defined-BR-config": "true",
        "security-mode": "NONE",
        "psk-key-id": 1,
        "psk-key": "{0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf}",
        "pana-mode": "",
        "tls-psk-key": "{0xcf, 0xce, 0xcd, 0xcc, 0xcb, 0xca, 0xc9, 0xc8, 0xc7, 0xc6, 0xc5, 0xc4, 0xc3, 0xc2, 0xc1, 0xc0}",
        "tls-psk-key-id": 1,
        "pan-id": "0x0691",
        "network-id": "network000000000",
        "beacon-protocol-id": 4,
        "prefix": "fd00:db8::",
        "prefix-from-backhaul": true,
        "rf-channel": 12,
        "rf-channel-page": 0,
        "rf-channel-mask": "0x07fff800",
        "short-mac-address": "0xface",
        "backhaul-dynamic-bootstrap": true,
        "backhaul-prefix": "fd00:db8:ff1::",
        "backhaul-default-route": "::/0",
        "backhaul-next-hop": "fe80::1",
        "ra-router-lifetime": 1024,
        "rpl-instance-id": 1,
        "rpl-idoublings": 9,
        "rpl-imin": 12,
        "rpl-k": 10,
        "rpl-max-rank-inc": 2048,
        "rpl-min-hop-rank-inc": 128,
        "rpl-default-lifetime": 64,
        "rpl-lifetime-unit": 60,
        "rpl-pcs": 1,
        "rpl-ocp": 1,
        "multicast-addr": "ff05::7",
        "LED": "NC",
        "SERIAL_TX": "NC",
        "SERIAL_RX": "NC",
        "SERIAL_CTS": "NC",
        "SERIAL_RTS": "NC"
    },
    "target_overrides": {
        "*": {
            "target.network-default-interface-type": "ETHERNET",
            "nsapi.default-stack": "NANOSTACK",
            "mbed-trace.enable": 1,
            "nanostack.configuration": "lowpan_border_router",
            "platform.stdio-convert-newlines": true,
            "platform.stdio-baud-rate": 115200,
            "mbed-mesh-api.heap-size": 40000,
            "mbed-mesh-api.heap-stat-info": "&memory_heap_stat",
            "mbed-mesh-api.heap-stat-info-definition": "mem_stat_t memory_heap_stat;"
        },
        "K64F": {
            "LED": "LED_GREEN",
            "SERIAL_TX": "PTE0",
            "SERIAL_RX": "PTE1",
            "SERIAL_CTS": "PTE2",
            "SERIAL_RTS": "PTE3",
            "kinetis-emac.tx-ring-len":4,
            "kinetis-emac.rx-ring-len":4
        },
        "K66F": {
            "LED": "LED_GREEN",
            "kinetis-emac.tx-ring-len":4,
            "kinetis-emac.rx-ring-len":4
        }
    }
}