mbed library sources. Supersedes mbed-src.

Dependents:   BREAK_SENSOR_LED

Fork of mbed-dev by mbed official

Committer:
AnnaBridge
Date:
Fri Sep 15 14:59:18 2017 +0100
Revision:
173:e131a1973e81
Parent:
170:19eb464bc2be
Child:
179:b0033dcd6934
This updates the lib to the mbed lib v 151

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
<> 149:156823d33999 3 * Copyright (c) 2015, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30 #include "mbed_assert.h"
<> 149:156823d33999 31 #include "mbed_error.h"
<> 149:156823d33999 32 #include "spi_api.h"
<> 149:156823d33999 33
<> 149:156823d33999 34 #if DEVICE_SPI
<> 149:156823d33999 35 #include <stdbool.h>
<> 149:156823d33999 36 #include <math.h>
<> 149:156823d33999 37 #include <string.h>
<> 149:156823d33999 38 #include "cmsis.h"
<> 149:156823d33999 39 #include "pinmap.h"
<> 149:156823d33999 40 #include "PeripheralPins.h"
AnnaBridge 168:9672193075cf 41 #include "spi_device.h"
<> 149:156823d33999 42
<> 149:156823d33999 43 #if DEVICE_SPI_ASYNCH
<> 149:156823d33999 44 #define SPI_INST(obj) ((SPI_TypeDef *)(obj->spi.spi))
<> 149:156823d33999 45 #else
<> 149:156823d33999 46 #define SPI_INST(obj) ((SPI_TypeDef *)(obj->spi))
<> 149:156823d33999 47 #endif
<> 149:156823d33999 48
<> 149:156823d33999 49 #if DEVICE_SPI_ASYNCH
<> 149:156823d33999 50 #define SPI_S(obj) (( struct spi_s *)(&(obj->spi)))
<> 149:156823d33999 51 #else
<> 149:156823d33999 52 #define SPI_S(obj) (( struct spi_s *)(obj))
<> 149:156823d33999 53 #endif
<> 149:156823d33999 54
<> 149:156823d33999 55 #ifndef DEBUG_STDIO
<> 149:156823d33999 56 # define DEBUG_STDIO 0
<> 149:156823d33999 57 #endif
<> 149:156823d33999 58
<> 149:156823d33999 59 #if DEBUG_STDIO
<> 149:156823d33999 60 # include <stdio.h>
<> 149:156823d33999 61 # define DEBUG_PRINTF(...) do { printf(__VA_ARGS__); } while(0)
<> 149:156823d33999 62 #else
<> 149:156823d33999 63 # define DEBUG_PRINTF(...) {}
<> 149:156823d33999 64 #endif
<> 149:156823d33999 65
AnnaBridge 173:e131a1973e81 66 /* Consider 10ms as the default timeout for sending/receving 1 byte */
AnnaBridge 173:e131a1973e81 67 #define TIMEOUT_1_BYTE 10
AnnaBridge 173:e131a1973e81 68
<> 149:156823d33999 69 void init_spi(spi_t *obj)
<> 149:156823d33999 70 {
<> 149:156823d33999 71 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 72 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 73
<> 149:156823d33999 74 __HAL_SPI_DISABLE(handle);
<> 149:156823d33999 75
<> 149:156823d33999 76 DEBUG_PRINTF("init_spi: instance=0x%8X\r\n", (int)handle->Instance);
<> 149:156823d33999 77 if (HAL_SPI_Init(handle) != HAL_OK) {
<> 149:156823d33999 78 error("Cannot initialize SPI");
<> 149:156823d33999 79 }
<> 149:156823d33999 80
AnnaBridge 173:e131a1973e81 81 /* In case of standard 4 wires SPI,PI can be kept enabled all time
AnnaBridge 173:e131a1973e81 82 * and SCK will only be generated during the write operations. But in case
AnnaBridge 173:e131a1973e81 83 * of 3 wires, it should be only enabled during rd/wr unitary operations,
AnnaBridge 173:e131a1973e81 84 * which is handled inside STM32 HAL layer.
AnnaBridge 173:e131a1973e81 85 */
AnnaBridge 173:e131a1973e81 86 if (handle->Init.Direction == SPI_DIRECTION_2LINES) {
AnnaBridge 173:e131a1973e81 87 __HAL_SPI_ENABLE(handle);
AnnaBridge 173:e131a1973e81 88 }
<> 149:156823d33999 89 }
<> 149:156823d33999 90
<> 149:156823d33999 91 void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
<> 149:156823d33999 92 {
<> 149:156823d33999 93 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 94 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 95
<> 149:156823d33999 96 // Determine the SPI to use
<> 149:156823d33999 97 SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
<> 149:156823d33999 98 SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
<> 149:156823d33999 99 SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
<> 149:156823d33999 100 SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
<> 149:156823d33999 101
<> 149:156823d33999 102 SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
<> 149:156823d33999 103 SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
<> 149:156823d33999 104
<> 149:156823d33999 105 spiobj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
<> 149:156823d33999 106 MBED_ASSERT(spiobj->spi != (SPIName)NC);
<> 149:156823d33999 107
<> 149:156823d33999 108 #if defined SPI1_BASE
<> 149:156823d33999 109 // Enable SPI clock
<> 149:156823d33999 110 if (spiobj->spi == SPI_1) {
<> 149:156823d33999 111 __HAL_RCC_SPI1_CLK_ENABLE();
<> 149:156823d33999 112 spiobj->spiIRQ = SPI1_IRQn;
<> 149:156823d33999 113 }
<> 149:156823d33999 114 #endif
<> 149:156823d33999 115
<> 149:156823d33999 116 #if defined SPI2_BASE
<> 149:156823d33999 117 if (spiobj->spi == SPI_2) {
<> 149:156823d33999 118 __HAL_RCC_SPI2_CLK_ENABLE();
<> 149:156823d33999 119 spiobj->spiIRQ = SPI2_IRQn;
<> 149:156823d33999 120 }
<> 149:156823d33999 121 #endif
<> 149:156823d33999 122
<> 149:156823d33999 123 #if defined SPI3_BASE
<> 149:156823d33999 124 if (spiobj->spi == SPI_3) {
<> 149:156823d33999 125 __HAL_RCC_SPI3_CLK_ENABLE();
<> 149:156823d33999 126 spiobj->spiIRQ = SPI3_IRQn;
<> 149:156823d33999 127 }
<> 149:156823d33999 128 #endif
<> 149:156823d33999 129
<> 149:156823d33999 130 #if defined SPI4_BASE
<> 149:156823d33999 131 if (spiobj->spi == SPI_4) {
<> 149:156823d33999 132 __HAL_RCC_SPI4_CLK_ENABLE();
<> 149:156823d33999 133 spiobj->spiIRQ = SPI4_IRQn;
<> 149:156823d33999 134 }
<> 149:156823d33999 135 #endif
<> 149:156823d33999 136
<> 149:156823d33999 137 #if defined SPI5_BASE
<> 149:156823d33999 138 if (spiobj->spi == SPI_5) {
<> 149:156823d33999 139 __HAL_RCC_SPI5_CLK_ENABLE();
<> 149:156823d33999 140 spiobj->spiIRQ = SPI5_IRQn;
<> 149:156823d33999 141 }
<> 149:156823d33999 142 #endif
<> 149:156823d33999 143
<> 149:156823d33999 144 #if defined SPI6_BASE
<> 149:156823d33999 145 if (spiobj->spi == SPI_6) {
<> 149:156823d33999 146 __HAL_RCC_SPI6_CLK_ENABLE();
<> 149:156823d33999 147 spiobj->spiIRQ = SPI6_IRQn;
<> 149:156823d33999 148 }
<> 149:156823d33999 149 #endif
<> 149:156823d33999 150
<> 149:156823d33999 151 // Configure the SPI pins
<> 149:156823d33999 152 pinmap_pinout(mosi, PinMap_SPI_MOSI);
<> 149:156823d33999 153 pinmap_pinout(miso, PinMap_SPI_MISO);
<> 149:156823d33999 154 pinmap_pinout(sclk, PinMap_SPI_SCLK);
<> 149:156823d33999 155 spiobj->pin_miso = miso;
<> 149:156823d33999 156 spiobj->pin_mosi = mosi;
<> 149:156823d33999 157 spiobj->pin_sclk = sclk;
<> 149:156823d33999 158 spiobj->pin_ssel = ssel;
<> 149:156823d33999 159 if (ssel != NC) {
<> 149:156823d33999 160 pinmap_pinout(ssel, PinMap_SPI_SSEL);
<> 149:156823d33999 161 } else {
<> 149:156823d33999 162 handle->Init.NSS = SPI_NSS_SOFT;
<> 149:156823d33999 163 }
<> 149:156823d33999 164
<> 149:156823d33999 165 /* Fill default value */
<> 149:156823d33999 166 handle->Instance = SPI_INST(obj);
<> 149:156823d33999 167 handle->Init.Mode = SPI_MODE_MASTER;
<> 149:156823d33999 168 handle->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
AnnaBridge 173:e131a1973e81 169
AnnaBridge 173:e131a1973e81 170 if (miso != NC) {
AnnaBridge 173:e131a1973e81 171 handle->Init.Direction = SPI_DIRECTION_2LINES;
AnnaBridge 173:e131a1973e81 172 } else {
AnnaBridge 173:e131a1973e81 173 handle->Init.Direction = SPI_DIRECTION_1LINE;
AnnaBridge 173:e131a1973e81 174 }
AnnaBridge 173:e131a1973e81 175
<> 149:156823d33999 176 handle->Init.CLKPhase = SPI_PHASE_1EDGE;
<> 149:156823d33999 177 handle->Init.CLKPolarity = SPI_POLARITY_LOW;
AnnaBridge 165:e614a9f1c9e2 178 handle->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
<> 149:156823d33999 179 handle->Init.CRCPolynomial = 7;
<> 149:156823d33999 180 handle->Init.DataSize = SPI_DATASIZE_8BIT;
<> 149:156823d33999 181 handle->Init.FirstBit = SPI_FIRSTBIT_MSB;
AnnaBridge 165:e614a9f1c9e2 182 handle->Init.TIMode = SPI_TIMODE_DISABLE;
<> 149:156823d33999 183
<> 149:156823d33999 184 init_spi(obj);
<> 149:156823d33999 185 }
<> 149:156823d33999 186
<> 149:156823d33999 187 void spi_free(spi_t *obj)
<> 149:156823d33999 188 {
<> 149:156823d33999 189 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 190 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 191
<> 149:156823d33999 192 DEBUG_PRINTF("spi_free\r\n");
<> 149:156823d33999 193
<> 149:156823d33999 194 __HAL_SPI_DISABLE(handle);
<> 149:156823d33999 195 HAL_SPI_DeInit(handle);
<> 149:156823d33999 196
<> 149:156823d33999 197 #if defined SPI1_BASE
<> 149:156823d33999 198 // Reset SPI and disable clock
<> 149:156823d33999 199 if (spiobj->spi == SPI_1) {
<> 149:156823d33999 200 __HAL_RCC_SPI1_FORCE_RESET();
<> 149:156823d33999 201 __HAL_RCC_SPI1_RELEASE_RESET();
<> 149:156823d33999 202 __HAL_RCC_SPI1_CLK_DISABLE();
<> 149:156823d33999 203 }
<> 149:156823d33999 204 #endif
<> 149:156823d33999 205 #if defined SPI2_BASE
<> 149:156823d33999 206 if (spiobj->spi == SPI_2) {
<> 149:156823d33999 207 __HAL_RCC_SPI2_FORCE_RESET();
<> 149:156823d33999 208 __HAL_RCC_SPI2_RELEASE_RESET();
<> 149:156823d33999 209 __HAL_RCC_SPI2_CLK_DISABLE();
<> 149:156823d33999 210 }
<> 149:156823d33999 211 #endif
<> 149:156823d33999 212
<> 149:156823d33999 213 #if defined SPI3_BASE
<> 149:156823d33999 214 if (spiobj->spi == SPI_3) {
<> 149:156823d33999 215 __HAL_RCC_SPI3_FORCE_RESET();
<> 149:156823d33999 216 __HAL_RCC_SPI3_RELEASE_RESET();
<> 149:156823d33999 217 __HAL_RCC_SPI3_CLK_DISABLE();
<> 149:156823d33999 218 }
<> 149:156823d33999 219 #endif
<> 149:156823d33999 220
<> 149:156823d33999 221 #if defined SPI4_BASE
<> 149:156823d33999 222 if (spiobj->spi == SPI_4) {
<> 149:156823d33999 223 __HAL_RCC_SPI4_FORCE_RESET();
<> 149:156823d33999 224 __HAL_RCC_SPI4_RELEASE_RESET();
<> 149:156823d33999 225 __HAL_RCC_SPI4_CLK_DISABLE();
<> 149:156823d33999 226 }
<> 149:156823d33999 227 #endif
<> 149:156823d33999 228
<> 149:156823d33999 229 #if defined SPI5_BASE
<> 149:156823d33999 230 if (spiobj->spi == SPI_5) {
<> 149:156823d33999 231 __HAL_RCC_SPI5_FORCE_RESET();
<> 149:156823d33999 232 __HAL_RCC_SPI5_RELEASE_RESET();
<> 149:156823d33999 233 __HAL_RCC_SPI5_CLK_DISABLE();
<> 149:156823d33999 234 }
<> 149:156823d33999 235 #endif
<> 149:156823d33999 236
<> 149:156823d33999 237 #if defined SPI6_BASE
<> 149:156823d33999 238 if (spiobj->spi == SPI_6) {
<> 149:156823d33999 239 __HAL_RCC_SPI6_FORCE_RESET();
<> 149:156823d33999 240 __HAL_RCC_SPI6_RELEASE_RESET();
<> 149:156823d33999 241 __HAL_RCC_SPI6_CLK_DISABLE();
<> 149:156823d33999 242 }
<> 149:156823d33999 243 #endif
<> 149:156823d33999 244
<> 149:156823d33999 245 // Configure GPIOs
<> 149:156823d33999 246 pin_function(spiobj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
<> 149:156823d33999 247 pin_function(spiobj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
<> 149:156823d33999 248 pin_function(spiobj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
<> 149:156823d33999 249 if (handle->Init.NSS != SPI_NSS_SOFT) {
<> 149:156823d33999 250 pin_function(spiobj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
<> 149:156823d33999 251 }
<> 149:156823d33999 252 }
<> 149:156823d33999 253
<> 149:156823d33999 254 void spi_format(spi_t *obj, int bits, int mode, int slave)
<> 149:156823d33999 255 {
<> 149:156823d33999 256 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 257 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 258
<> 149:156823d33999 259 DEBUG_PRINTF("spi_format, bits:%d, mode:%d, slave?:%d\r\n", bits, mode, slave);
<> 149:156823d33999 260
<> 149:156823d33999 261 // Save new values
<> 149:156823d33999 262 handle->Init.DataSize = (bits == 16) ? SPI_DATASIZE_16BIT : SPI_DATASIZE_8BIT;
<> 149:156823d33999 263
<> 149:156823d33999 264 switch (mode) {
<> 149:156823d33999 265 case 0:
<> 149:156823d33999 266 handle->Init.CLKPolarity = SPI_POLARITY_LOW;
<> 149:156823d33999 267 handle->Init.CLKPhase = SPI_PHASE_1EDGE;
<> 149:156823d33999 268 break;
<> 149:156823d33999 269 case 1:
<> 149:156823d33999 270 handle->Init.CLKPolarity = SPI_POLARITY_LOW;
<> 149:156823d33999 271 handle->Init.CLKPhase = SPI_PHASE_2EDGE;
<> 149:156823d33999 272 break;
<> 149:156823d33999 273 case 2:
<> 149:156823d33999 274 handle->Init.CLKPolarity = SPI_POLARITY_HIGH;
<> 149:156823d33999 275 handle->Init.CLKPhase = SPI_PHASE_1EDGE;
<> 149:156823d33999 276 break;
<> 149:156823d33999 277 default:
<> 149:156823d33999 278 handle->Init.CLKPolarity = SPI_POLARITY_HIGH;
<> 149:156823d33999 279 handle->Init.CLKPhase = SPI_PHASE_2EDGE;
<> 149:156823d33999 280 break;
<> 149:156823d33999 281 }
<> 149:156823d33999 282
<> 149:156823d33999 283 if (handle->Init.NSS != SPI_NSS_SOFT) {
<> 149:156823d33999 284 handle->Init.NSS = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
<> 149:156823d33999 285 }
<> 149:156823d33999 286
<> 149:156823d33999 287 handle->Init.Mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
<> 149:156823d33999 288
<> 149:156823d33999 289 init_spi(obj);
<> 149:156823d33999 290 }
<> 149:156823d33999 291
<> 149:156823d33999 292 /*
<> 149:156823d33999 293 * Only the IP clock input is family dependant so it computed
<> 149:156823d33999 294 * separately in spi_get_clock_freq
<> 149:156823d33999 295 */
<> 149:156823d33999 296 extern int spi_get_clock_freq(spi_t *obj);
<> 149:156823d33999 297
<> 149:156823d33999 298 static const uint16_t baudrate_prescaler_table[] = {SPI_BAUDRATEPRESCALER_2,
<> 149:156823d33999 299 SPI_BAUDRATEPRESCALER_4,
<> 149:156823d33999 300 SPI_BAUDRATEPRESCALER_8,
<> 149:156823d33999 301 SPI_BAUDRATEPRESCALER_16,
<> 149:156823d33999 302 SPI_BAUDRATEPRESCALER_32,
<> 149:156823d33999 303 SPI_BAUDRATEPRESCALER_64,
<> 149:156823d33999 304 SPI_BAUDRATEPRESCALER_128,
<> 149:156823d33999 305 SPI_BAUDRATEPRESCALER_256};
<> 149:156823d33999 306
<> 149:156823d33999 307 void spi_frequency(spi_t *obj, int hz) {
<> 149:156823d33999 308 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 309 int spi_hz = 0;
<> 149:156823d33999 310 uint8_t prescaler_rank = 0;
<> 159:612c381a210f 311 uint8_t last_index = (sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0])) - 1;
<> 149:156823d33999 312 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 313
<> 159:612c381a210f 314 /* Calculate the spi clock for prescaler_rank 0: SPI_BAUDRATEPRESCALER_2 */
<> 159:612c381a210f 315 spi_hz = spi_get_clock_freq(obj) / 2;
<> 149:156823d33999 316
<> 149:156823d33999 317 /* Define pre-scaler in order to get highest available frequency below requested frequency */
<> 159:612c381a210f 318 while ((spi_hz > hz) && (prescaler_rank < last_index)) {
<> 149:156823d33999 319 spi_hz = spi_hz / 2;
<> 149:156823d33999 320 prescaler_rank++;
<> 149:156823d33999 321 }
<> 149:156823d33999 322
<> 159:612c381a210f 323 /* Use the best fit pre-scaler */
<> 159:612c381a210f 324 handle->Init.BaudRatePrescaler = baudrate_prescaler_table[prescaler_rank];
<> 159:612c381a210f 325
<> 159:612c381a210f 326 /* In case maximum pre-scaler still gives too high freq, raise an error */
<> 159:612c381a210f 327 if (spi_hz > hz) {
<> 160:d5399cc887bb 328 DEBUG_PRINTF("WARNING: lowest SPI freq (%d) higher than requested (%d)\r\n", spi_hz, hz);
<> 149:156823d33999 329 }
<> 149:156823d33999 330
<> 159:612c381a210f 331 DEBUG_PRINTF("spi_frequency, request:%d, select:%d\r\n", hz, spi_hz);
<> 159:612c381a210f 332
<> 149:156823d33999 333 init_spi(obj);
<> 149:156823d33999 334 }
<> 149:156823d33999 335
<> 149:156823d33999 336 static inline int ssp_readable(spi_t *obj)
<> 149:156823d33999 337 {
<> 149:156823d33999 338 int status;
<> 149:156823d33999 339 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 340 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 341
<> 149:156823d33999 342 // Check if data is received
<> 149:156823d33999 343 status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
<> 149:156823d33999 344 return status;
<> 149:156823d33999 345 }
<> 149:156823d33999 346
<> 149:156823d33999 347 static inline int ssp_writeable(spi_t *obj)
<> 149:156823d33999 348 {
<> 149:156823d33999 349 int status;
<> 149:156823d33999 350 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 351 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 352
<> 149:156823d33999 353 // Check if data is transmitted
<> 149:156823d33999 354 status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
<> 149:156823d33999 355 return status;
<> 149:156823d33999 356 }
<> 149:156823d33999 357
<> 149:156823d33999 358 static inline int ssp_busy(spi_t *obj)
<> 149:156823d33999 359 {
<> 149:156823d33999 360 int status;
<> 149:156823d33999 361 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 362 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 363 status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
<> 149:156823d33999 364 return status;
<> 149:156823d33999 365 }
<> 149:156823d33999 366
<> 149:156823d33999 367 int spi_master_write(spi_t *obj, int value)
<> 149:156823d33999 368 {
<> 149:156823d33999 369 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 370 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 371
AnnaBridge 173:e131a1973e81 372 if (handle->Init.Direction == SPI_DIRECTION_1LINE) {
AnnaBridge 173:e131a1973e81 373 return HAL_SPI_Transmit(handle, (uint8_t*)&value, 1, TIMEOUT_1_BYTE);
AnnaBridge 173:e131a1973e81 374 }
AnnaBridge 173:e131a1973e81 375
AnnaBridge 168:9672193075cf 376 #if defined(LL_SPI_RX_FIFO_TH_HALF)
AnnaBridge 168:9672193075cf 377 /* Configure the default data size */
AnnaBridge 168:9672193075cf 378 if (handle->Init.DataSize == SPI_DATASIZE_16BIT) {
AnnaBridge 168:9672193075cf 379 LL_SPI_SetRxFIFOThreshold(SPI_INST(obj), LL_SPI_RX_FIFO_TH_HALF);
AnnaBridge 168:9672193075cf 380 } else {
AnnaBridge 168:9672193075cf 381 LL_SPI_SetRxFIFOThreshold(SPI_INST(obj), LL_SPI_RX_FIFO_TH_QUARTER);
AnnaBridge 168:9672193075cf 382 }
AnnaBridge 168:9672193075cf 383 #endif
<> 149:156823d33999 384
AnnaBridge 168:9672193075cf 385 /* Here we're using LL which means direct registers access
AnnaBridge 168:9672193075cf 386 * There is no error management, so we may end up looping
AnnaBridge 168:9672193075cf 387 * infinitely here in case of faulty device for insatnce,
AnnaBridge 168:9672193075cf 388 * but this will increase performances significantly
AnnaBridge 168:9672193075cf 389 */
<> 149:156823d33999 390
AnnaBridge 168:9672193075cf 391 /* Wait TXE flag to transmit data */
AnnaBridge 168:9672193075cf 392 while (!LL_SPI_IsActiveFlag_TXE(SPI_INST(obj)));
AnnaBridge 168:9672193075cf 393
AnnaBridge 168:9672193075cf 394 if (handle->Init.DataSize == SPI_DATASIZE_16BIT) {
AnnaBridge 168:9672193075cf 395 LL_SPI_TransmitData16(SPI_INST(obj), value);
<> 149:156823d33999 396 } else {
AnnaBridge 168:9672193075cf 397 LL_SPI_TransmitData8(SPI_INST(obj), (uint8_t) value);
AnnaBridge 168:9672193075cf 398 }
AnnaBridge 168:9672193075cf 399
AnnaBridge 168:9672193075cf 400 /* Then wait RXE flag before reading */
AnnaBridge 168:9672193075cf 401 while (!LL_SPI_IsActiveFlag_RXNE(SPI_INST(obj)));
AnnaBridge 168:9672193075cf 402
AnnaBridge 168:9672193075cf 403 if (handle->Init.DataSize == SPI_DATASIZE_16BIT) {
AnnaBridge 168:9672193075cf 404 return LL_SPI_ReceiveData16(SPI_INST(obj));
AnnaBridge 168:9672193075cf 405 } else {
AnnaBridge 168:9672193075cf 406 return LL_SPI_ReceiveData8(SPI_INST(obj));
<> 149:156823d33999 407 }
<> 149:156823d33999 408 }
<> 149:156823d33999 409
Kojto 170:19eb464bc2be 410 int spi_master_block_write(spi_t *obj, const char *tx_buffer, int tx_length,
Kojto 170:19eb464bc2be 411 char *rx_buffer, int rx_length, char write_fill)
AnnaBridge 167:e84263d55307 412 {
AnnaBridge 173:e131a1973e81 413 struct spi_s *spiobj = SPI_S(obj);
AnnaBridge 173:e131a1973e81 414 SPI_HandleTypeDef *handle = &(spiobj->handle);
AnnaBridge 167:e84263d55307 415 int total = (tx_length > rx_length) ? tx_length : rx_length;
AnnaBridge 173:e131a1973e81 416 int i = 0;
AnnaBridge 173:e131a1973e81 417 if (handle->Init.Direction == SPI_DIRECTION_2LINES) {
AnnaBridge 173:e131a1973e81 418 for (i = 0; i < total; i++) {
AnnaBridge 173:e131a1973e81 419 char out = (i < tx_length) ? tx_buffer[i] : write_fill;
AnnaBridge 173:e131a1973e81 420 char in = spi_master_write(obj, out);
AnnaBridge 173:e131a1973e81 421 if (i < rx_length) {
AnnaBridge 173:e131a1973e81 422 rx_buffer[i] = in;
AnnaBridge 173:e131a1973e81 423 }
AnnaBridge 173:e131a1973e81 424 }
AnnaBridge 173:e131a1973e81 425 } else {
AnnaBridge 173:e131a1973e81 426 /* In case of 1 WIRE only, first handle TX, then Rx */
AnnaBridge 173:e131a1973e81 427 if (tx_length != 0) {
AnnaBridge 173:e131a1973e81 428 if (HAL_OK != HAL_SPI_Transmit(handle, (uint8_t*)tx_buffer, tx_length, tx_length*TIMEOUT_1_BYTE)) {
AnnaBridge 173:e131a1973e81 429 /* report an error */
AnnaBridge 173:e131a1973e81 430 total = 0;
AnnaBridge 173:e131a1973e81 431 }
AnnaBridge 173:e131a1973e81 432 }
AnnaBridge 173:e131a1973e81 433 if (rx_length != 0) {
AnnaBridge 173:e131a1973e81 434 if (HAL_OK != HAL_SPI_Receive(handle, (uint8_t*)rx_buffer, rx_length, rx_length*TIMEOUT_1_BYTE)) {
AnnaBridge 173:e131a1973e81 435 /* report an error */
AnnaBridge 173:e131a1973e81 436 total = 0;
AnnaBridge 173:e131a1973e81 437 }
AnnaBridge 167:e84263d55307 438 }
AnnaBridge 167:e84263d55307 439 }
AnnaBridge 167:e84263d55307 440
AnnaBridge 167:e84263d55307 441 return total;
AnnaBridge 167:e84263d55307 442 }
AnnaBridge 167:e84263d55307 443
<> 149:156823d33999 444 int spi_slave_receive(spi_t *obj)
<> 149:156823d33999 445 {
<> 149:156823d33999 446 return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
<> 149:156823d33999 447 };
<> 149:156823d33999 448
<> 149:156823d33999 449 int spi_slave_read(spi_t *obj)
<> 149:156823d33999 450 {
<> 149:156823d33999 451 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 452 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 453 while (!ssp_readable(obj));
AnnaBridge 173:e131a1973e81 454 if (handle->Init.DataSize == SPI_DATASIZE_16BIT) {
AnnaBridge 173:e131a1973e81 455 return LL_SPI_ReceiveData16(SPI_INST(obj));
<> 149:156823d33999 456 } else {
AnnaBridge 173:e131a1973e81 457 return LL_SPI_ReceiveData8(SPI_INST(obj));
<> 149:156823d33999 458 }
<> 149:156823d33999 459 }
<> 149:156823d33999 460
<> 149:156823d33999 461 void spi_slave_write(spi_t *obj, int value)
<> 149:156823d33999 462 {
<> 149:156823d33999 463 SPI_TypeDef *spi = SPI_INST(obj);
<> 149:156823d33999 464 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 465 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 466 while (!ssp_writeable(obj));
<> 149:156823d33999 467 if (handle->Init.DataSize == SPI_DATASIZE_8BIT) {
<> 149:156823d33999 468 // Force 8-bit access to the data register
<> 149:156823d33999 469 uint8_t *p_spi_dr = 0;
<> 149:156823d33999 470 p_spi_dr = (uint8_t *) & (spi->DR);
<> 149:156823d33999 471 *p_spi_dr = (uint8_t)value;
<> 149:156823d33999 472 } else { // SPI_DATASIZE_16BIT
<> 149:156823d33999 473 spi->DR = (uint16_t)value;
<> 149:156823d33999 474 }
<> 149:156823d33999 475 }
<> 149:156823d33999 476
<> 149:156823d33999 477 int spi_busy(spi_t *obj)
<> 149:156823d33999 478 {
<> 149:156823d33999 479 return ssp_busy(obj);
<> 149:156823d33999 480 }
<> 149:156823d33999 481
<> 149:156823d33999 482 #ifdef DEVICE_SPI_ASYNCH
<> 149:156823d33999 483 typedef enum {
<> 149:156823d33999 484 SPI_TRANSFER_TYPE_NONE = 0,
<> 149:156823d33999 485 SPI_TRANSFER_TYPE_TX = 1,
<> 149:156823d33999 486 SPI_TRANSFER_TYPE_RX = 2,
<> 149:156823d33999 487 SPI_TRANSFER_TYPE_TXRX = 3,
<> 149:156823d33999 488 } transfer_type_t;
<> 149:156823d33999 489
<> 149:156823d33999 490
<> 149:156823d33999 491 /// @returns the number of bytes transferred, or `0` if nothing transferred
<> 149:156823d33999 492 static int spi_master_start_asynch_transfer(spi_t *obj, transfer_type_t transfer_type, const void *tx, void *rx, size_t length)
<> 149:156823d33999 493 {
<> 149:156823d33999 494 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 495 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 496 bool is16bit = (handle->Init.DataSize == SPI_DATASIZE_16BIT);
<> 149:156823d33999 497 // the HAL expects number of transfers instead of number of bytes
<> 149:156823d33999 498 // so for 16 bit transfer width the count needs to be halved
<> 149:156823d33999 499 size_t words;
<> 149:156823d33999 500
<> 149:156823d33999 501 DEBUG_PRINTF("SPI inst=0x%8X Start: %u, %u\r\n", (int)handle->Instance, transfer_type, length);
<> 149:156823d33999 502
<> 149:156823d33999 503 obj->spi.transfer_type = transfer_type;
<> 149:156823d33999 504
<> 149:156823d33999 505 if (is16bit) {
<> 149:156823d33999 506 words = length / 2;
<> 149:156823d33999 507 } else {
<> 149:156823d33999 508 words = length;
<> 149:156823d33999 509 }
<> 149:156823d33999 510
<> 149:156823d33999 511 // enable the interrupt
<> 149:156823d33999 512 IRQn_Type irq_n = spiobj->spiIRQ;
<> 153:fa9ff456f731 513 NVIC_DisableIRQ(irq_n);
<> 149:156823d33999 514 NVIC_ClearPendingIRQ(irq_n);
<> 149:156823d33999 515 NVIC_SetPriority(irq_n, 1);
<> 149:156823d33999 516 NVIC_EnableIRQ(irq_n);
<> 149:156823d33999 517
<> 149:156823d33999 518 // enable the right hal transfer
<> 149:156823d33999 519 int rc = 0;
<> 149:156823d33999 520 switch(transfer_type) {
<> 149:156823d33999 521 case SPI_TRANSFER_TYPE_TXRX:
<> 149:156823d33999 522 rc = HAL_SPI_TransmitReceive_IT(handle, (uint8_t*)tx, (uint8_t*)rx, words);
<> 149:156823d33999 523 break;
<> 149:156823d33999 524 case SPI_TRANSFER_TYPE_TX:
<> 149:156823d33999 525 rc = HAL_SPI_Transmit_IT(handle, (uint8_t*)tx, words);
<> 149:156823d33999 526 break;
<> 149:156823d33999 527 case SPI_TRANSFER_TYPE_RX:
<> 149:156823d33999 528 // the receive function also "transmits" the receive buffer so in order
<> 149:156823d33999 529 // to guarantee that 0xff is on the line, we explicitly memset it here
<> 149:156823d33999 530 memset(rx, SPI_FILL_WORD, length);
<> 149:156823d33999 531 rc = HAL_SPI_Receive_IT(handle, (uint8_t*)rx, words);
<> 149:156823d33999 532 break;
<> 149:156823d33999 533 default:
<> 149:156823d33999 534 length = 0;
<> 149:156823d33999 535 }
<> 149:156823d33999 536
<> 149:156823d33999 537 if (rc) {
<> 149:156823d33999 538 DEBUG_PRINTF("SPI: RC=%u\n", rc);
<> 149:156823d33999 539 length = 0;
<> 149:156823d33999 540 }
<> 149:156823d33999 541
<> 149:156823d33999 542 return length;
<> 149:156823d33999 543 }
<> 149:156823d33999 544
<> 149:156823d33999 545 // asynchronous API
<> 149:156823d33999 546 void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint)
<> 149:156823d33999 547 {
<> 149:156823d33999 548 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 549 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 550
<> 149:156823d33999 551 // TODO: DMA usage is currently ignored
<> 149:156823d33999 552 (void) hint;
<> 149:156823d33999 553
<> 149:156823d33999 554 // check which use-case we have
<> 149:156823d33999 555 bool use_tx = (tx != NULL && tx_length > 0);
<> 149:156823d33999 556 bool use_rx = (rx != NULL && rx_length > 0);
<> 149:156823d33999 557 bool is16bit = (handle->Init.DataSize == SPI_DATASIZE_16BIT);
<> 149:156823d33999 558
<> 149:156823d33999 559 // don't do anything, if the buffers aren't valid
<> 149:156823d33999 560 if (!use_tx && !use_rx)
<> 149:156823d33999 561 return;
<> 149:156823d33999 562
<> 149:156823d33999 563 // copy the buffers to the SPI object
<> 149:156823d33999 564 obj->tx_buff.buffer = (void *) tx;
<> 149:156823d33999 565 obj->tx_buff.length = tx_length;
<> 149:156823d33999 566 obj->tx_buff.pos = 0;
<> 149:156823d33999 567 obj->tx_buff.width = is16bit ? 16 : 8;
<> 149:156823d33999 568
<> 149:156823d33999 569 obj->rx_buff.buffer = rx;
<> 149:156823d33999 570 obj->rx_buff.length = rx_length;
<> 149:156823d33999 571 obj->rx_buff.pos = 0;
<> 149:156823d33999 572 obj->rx_buff.width = obj->tx_buff.width;
<> 149:156823d33999 573
<> 149:156823d33999 574 obj->spi.event = event;
<> 149:156823d33999 575
<> 149:156823d33999 576 DEBUG_PRINTF("SPI: Transfer: %u, %u\n", tx_length, rx_length);
<> 149:156823d33999 577
<> 149:156823d33999 578 // register the thunking handler
<> 149:156823d33999 579 IRQn_Type irq_n = spiobj->spiIRQ;
<> 149:156823d33999 580 NVIC_SetVector(irq_n, (uint32_t)handler);
<> 149:156823d33999 581
<> 149:156823d33999 582 // enable the right hal transfer
<> 149:156823d33999 583 if (use_tx && use_rx) {
<> 149:156823d33999 584 // we cannot manage different rx / tx sizes, let's use smaller one
<> 149:156823d33999 585 size_t size = (tx_length < rx_length)? tx_length : rx_length;
<> 149:156823d33999 586 if(tx_length != rx_length) {
<> 149:156823d33999 587 DEBUG_PRINTF("SPI: Full duplex transfer only 1 size: %d\n", size);
<> 149:156823d33999 588 obj->tx_buff.length = size;
<> 149:156823d33999 589 obj->rx_buff.length = size;
<> 149:156823d33999 590 }
<> 149:156823d33999 591 spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_TXRX, tx, rx, size);
<> 149:156823d33999 592 } else if (use_tx) {
<> 149:156823d33999 593 spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_TX, tx, NULL, tx_length);
<> 149:156823d33999 594 } else if (use_rx) {
<> 149:156823d33999 595 spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_RX, NULL, rx, rx_length);
<> 149:156823d33999 596 }
<> 149:156823d33999 597 }
<> 149:156823d33999 598
<> 153:fa9ff456f731 599 inline uint32_t spi_irq_handler_asynch(spi_t *obj)
<> 149:156823d33999 600 {
<> 149:156823d33999 601 int event = 0;
<> 149:156823d33999 602
<> 149:156823d33999 603 // call the CubeF4 handler, this will update the handle
<> 153:fa9ff456f731 604 HAL_SPI_IRQHandler(&obj->spi.handle);
<> 149:156823d33999 605
<> 153:fa9ff456f731 606 if (obj->spi.handle.State == HAL_SPI_STATE_READY) {
<> 149:156823d33999 607 // When HAL SPI is back to READY state, check if there was an error
<> 153:fa9ff456f731 608 int error = obj->spi.handle.ErrorCode;
<> 149:156823d33999 609 if(error != HAL_SPI_ERROR_NONE) {
<> 149:156823d33999 610 // something went wrong and the transfer has definitely completed
<> 149:156823d33999 611 event = SPI_EVENT_ERROR | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE;
<> 149:156823d33999 612
<> 149:156823d33999 613 if (error & HAL_SPI_ERROR_OVR) {
<> 149:156823d33999 614 // buffer overrun
<> 149:156823d33999 615 event |= SPI_EVENT_RX_OVERFLOW;
<> 149:156823d33999 616 }
<> 149:156823d33999 617 } else {
<> 149:156823d33999 618 // else we're done
<> 149:156823d33999 619 event = SPI_EVENT_COMPLETE | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE;
<> 149:156823d33999 620 }
<> 153:fa9ff456f731 621 // enable the interrupt
<> 153:fa9ff456f731 622 NVIC_DisableIRQ(obj->spi.spiIRQ);
<> 153:fa9ff456f731 623 NVIC_ClearPendingIRQ(obj->spi.spiIRQ);
<> 149:156823d33999 624 }
<> 149:156823d33999 625
<> 149:156823d33999 626
<> 149:156823d33999 627 return (event & (obj->spi.event | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE));
<> 149:156823d33999 628 }
<> 149:156823d33999 629
<> 149:156823d33999 630 uint8_t spi_active(spi_t *obj)
<> 149:156823d33999 631 {
<> 149:156823d33999 632 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 633 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 634 HAL_SPI_StateTypeDef state = HAL_SPI_GetState(handle);
<> 149:156823d33999 635
<> 149:156823d33999 636 switch(state) {
<> 149:156823d33999 637 case HAL_SPI_STATE_RESET:
<> 149:156823d33999 638 case HAL_SPI_STATE_READY:
<> 149:156823d33999 639 case HAL_SPI_STATE_ERROR:
<> 149:156823d33999 640 return 0;
<> 149:156823d33999 641 default:
<> 149:156823d33999 642 return 1;
<> 149:156823d33999 643 }
<> 149:156823d33999 644 }
<> 149:156823d33999 645
<> 149:156823d33999 646 void spi_abort_asynch(spi_t *obj)
<> 149:156823d33999 647 {
<> 149:156823d33999 648 struct spi_s *spiobj = SPI_S(obj);
<> 149:156823d33999 649 SPI_HandleTypeDef *handle = &(spiobj->handle);
<> 149:156823d33999 650
<> 149:156823d33999 651 // disable interrupt
<> 149:156823d33999 652 IRQn_Type irq_n = spiobj->spiIRQ;
<> 149:156823d33999 653 NVIC_ClearPendingIRQ(irq_n);
<> 149:156823d33999 654 NVIC_DisableIRQ(irq_n);
<> 149:156823d33999 655
<> 149:156823d33999 656 // clean-up
<> 149:156823d33999 657 __HAL_SPI_DISABLE(handle);
<> 149:156823d33999 658 HAL_SPI_DeInit(handle);
<> 149:156823d33999 659 HAL_SPI_Init(handle);
<> 149:156823d33999 660 __HAL_SPI_ENABLE(handle);
<> 149:156823d33999 661 }
<> 149:156823d33999 662
<> 149:156823d33999 663 #endif //DEVICE_SPI_ASYNCH
<> 149:156823d33999 664
<> 149:156823d33999 665 #endif